Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RUBBER SHEET, SOLID

Active
SPE8E6-26-T-3989Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 3 sheets of solid rubber material, measuring 0.250 inches thick, 36 inches wide, and 36 inches long, with a smooth finish on both sides. The item is identified by NSN 9320-00-042-3117 and is being acquired under solicitation SPE8E6-26-T-3989, with a response deadline of August 17, 2026. The delivery is scheduled 167 days after contract award. The specification prohibits the presence of asbestos as defined in FED-STD-313 and mandates compliance with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, accessible via the DLA website. Sampling and inspection procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with acceptance criteria requiring zero non-conformances unless otherwise stated in the contract. Attributes are to be classified with verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively, with unspecified attributes treated as major. The procurement is fully competitive under a federal or military specification, and performance is to be delivered to New Cumberland, Pennsylvania, 17070-5002. The contracting office is the DLA New Cumberland Facility under the Department of Defense, with Ryan Kirlin designated as the primary point of contact.

General Info

Procure 3 rubber sheets, 0.250x36x36 inches, smooth finish, no asbestos, zero defects, deliver to New Cumberland, PA by 167 days post-award.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

326299 - All Other Rubber Product ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE8E6-26-T-3989.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Ryan Kirlin
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RUBBER SHEET,SOLID
RUBBER SHEET, SOLID
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
NOTES:
SMOOTH FINISH BOTH SIDES,
0.250" THICK, 36" WIDE, 36" LONG
NO ASBESTOS AS DEFINED IN FED-STD-313 IS
PERMITTED IN THIS ITEM
THIS NSN IS PROCURED AS FULLY COMPETITIVE IN
ACCORDANCE WITH A MILITARY / FEDERAL
SPECIFICATION/STANDARD. SEE NSN/Part Number: 9320-00-042-3117 Quantity: 3 SH Purchase Request: 7017758622QTY: 3 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326299
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE8ED-26-T-1237
The contract is for the procurement of three collapsible fabric tanks, each identified by NSN 5430015277233 and part number ATPD2295 Class I Type I, with an additional line item for a first article test requirement. Each tank is priced at $3.00, with a total quantity of three units, and delivery is required within 20 days FOB origin with no tolerance for quantity variance. The product must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, which override other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, with palletization governed by DLA Packaging Requirements, and hazardous material handling follows TQ requirement IP025 per FED-STD-313. Inspection and acceptance occur at the manufacturer’s origin, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. Configuration changes require formal engineering change proposals, and the contractor must implement a quality system certified to ANSI/ISO/ASQ 9001-2015 excluding paragraph 7.3. All items must be marked per MIL-STD-130N and shipped by traceable means only, delivered to the designated military facility at Camp Lejeune, North Carolina. The first article test, listed as a separate line item with one unit, is mandatory and non-reimbursable unless specifically waived, and its completion is a precondition for production delivery. The contract incorporates detailed technical documentation referenced through drawing and quality assurance provision numbers, with all data available through the DLA’s eProcurement portal during the solicitation window.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
RUBBER SHEET, SOLID
Solicitation # SPE8E6-26-T-3990
The contract is for the procurement of five rubber sheets, solid, with dimensions of 36 inches in length, 36 inches in width, and 0.125 inches in thickness, smooth on both sides. The item is identified by NSN 9320-00-061-0675 and is governed by DLA packaging requirements and technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue or award date depending on acquisition size. The specification mandates compliance with procurement clause 52.211-9G03 regarding the marking of individual sheets, and covered defense information may apply. Government identification must be removed from non-accepted supplies. Delivery is required within 167 days after order, under purchase request 7017758597. The solicitation number is SPE8E6-26-T-3990, issued on August 5, 2026, with responses due by August 17, 2026. The NAICS code is 326299, and the contracting office is the DLA New Cumberland Facility under the Department of Defense. The primary point of contact is Christopher Barraro, reachable via email and phone provided. The place of performance is New Cumberland, Pennsylvania, with a zip code of 17070-5002.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
COVERALL, FLOTATION
Solicitation # SPE8E9-26-T-3365
The contract pertains to the procurement of 8 units of a flotation coverall, identified by NSN 4220-01-486-8281 and manufacturer part number MS2175GS-2-XXL from MUSTANG SURVIVAL MFG, INC, under solicitation SPE8E9-26-T-3365. Delivery is required within 167 days of contract award, with a final delivery deadline of February 1, 2027, and the items must be shipped FOB origin. The unit price is $8.00 per unit, totaling $64.00, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while adhering to all applicable DLA Master List of Technical and Quality Requirements, which take precedence. All packaging and labeling must follow MIL-STD-129, and palletization must meet RP001 guidelines. The item has a mandatory 120-month shelf life with no extension permitted. Mercury or mercury-containing compounds are strictly prohibited except in limited functional applications such as batteries, fluorescent lamps, or specified instruments, with any portable devices containing mercury required to have shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The delivery address is DLA Distribution’s New Cumberland facility in Pennsylvania, and the unit of issue is each (EA). The contract references restricted defense information and mandates compliance with all relevant DoD procurement and environmental safety standards.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
RUBBER SHEET, CELLUL
Solicitation # SPE8E6-26-T-3988
The contract pertains to the procurement of rubber sheet, cellular, with specific technical and quality requirements outlined under NSN 9320-00-069-5176. The material must be 1/16 inch thick, 36 inches wide, and 36 inches long, with a smooth finish on both sides, and strictly prohibits the use of asbestos as defined in FED-STD-313. An exception to AMS 3195 Revision C allows the low temperature brittleness test to replace the compression deflection at low temperature test. The specification references the DLA Master List of Technical and Quality Requirements for additional technical and quality criteria identified by R or I numbers, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and unspecified attributes are deemed major. Zero non-conformances are required in sampling unless otherwise stated. Government identification must be removed from non-accepted supplies. The item is procured as fully competitive under a federal specification. Forty-eight units are required under purchase request 7017758593, with delivery due within 63 days of award. The solicitation, issued under SPE8E6-26-T-3988, opened on August 5, 2026, with responses due by August 17, 2026, and is managed by the Department of Defense through the Cherry Point location, with Christopher Barraro as the primary point of contact.
CHERRY POINT PHANTOM RD BLDG

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
BLOCK, RUBBER
Solicitation # SPE8E6-26-T-4040
The contract pertains to the procurement of 1,259 units of rubber blocks with NSN 9320-01-565-6471, under solicitation SPE8E6-26-T-4040, issued by the Defense Logistics Agency District San Joaquin. The item must be delivered FOB origin within 167 days of contract award, with a required delivery date of November 21, 2026, and a need ship date of February 1, 2027. Packaging and marking must strictly comply with MIL-STD-129R, ASTM D3951, and the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. All packaging must adhere to RP001 DLA Packaging Requirements for Procurement, including palletization, unit of issue, and quantity per unit pack as specified. The government identification must be removed from non-accepted supplies per RQ011. The contract enforces a zero variance in quantity and inspection and acceptance occur at the destination. The delivery address is DLA District San Joaquin, Recipient Warehouse 57 in Tracy, California, and transportation logistics must follow DLAD Proc Notes C19 and C20. The solicitation is set aside for Women-Owned Small Businesses under NAICS code 326299, with a response deadline of August 17, 2026. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List, using the revision in effect on the solicitation issue date.
DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
Supplier of Approved Filter Components (Sub-tier Manufacturing)
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 326299
New
DIBBS
Nonmetallic Hose Assembly SupplyThe contract is for the supply of a commercial off-the-shelf nonmetallic hose assembly with a 0.310-inch inner diameter and a total length of 23.0 inches, strictly adhering to the designated National Stock Number and approved manufacturer part numbers. The item must meet all technical and compliance requirements specified for use within Department of Defense systems, ensuring interoperability and reliability under operational conditions. The solicitation is issued as a subcontract under NAICS code 326299 and is being managed by the Maritime Supply Chain ESOC Buys group within the Department of Defense. The contract was posted on August 4, 2026, with a firm response deadline of August 17, 2026, and the place of performance is designated as Tampa, Florida, with a zip code of 33614-6409. All proposals must align with the exact dimensional and material specifications outlined, and only assemblies sourced from approved manufacturers will be considered. The procurement is conducted through the DIBBS platform, and interested parties are required to review the full solicitation details via the provided link to ensure complete compliance with submission protocols and technical requirements.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
Precision O-Ring Manufacturing and Supply
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 326299
New
DIBBS
BOOT, DUST AND MOISTURE
Solicitation # SPE7LX-26-U-9264
The contract seeks the procurement of 4,574 units of a BOOT, DUST AND MOISTURE SEAL specifically designed for tail rotor blade applications, identified by NSN 5340-01-108-3681, under solicitation SPE7LX-26-U-9264. The delivery must be completed within 104 days after award, with FOB Origin terms applying, meaning the contractor assumes all responsibilities and risks until the point of shipment. This is an indefinite-delivery contract with a maximum estimated value of $350,000, issued as a Women-Owned Small Business Set-Aside under NAICS code 326299. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the item must adhere to specified drawing controls, with only approved sources currently recognized, though additional qualified sources may be considered for future acquisitions. The product must comply with stringent environmental directives, including a complete prohibition on Class I ozone-depleting chemicals, which supersedes any conflicting specification but does not reduce product performance obligations. Substitutes require prior approval, and all materials must be labeled according to OSHA’s Hazard Communication Standard unless exempted under specific federal statutes. The item is subject to rigorous packaging, marking, and preservation standards, requiring compliance with MIL-STD-2073-1E and DLA Packaging Requirements (RP001), using box-type unit containers marked per MIL-STD-129 with data matrix barcodes, shelf-life expiration labels, and government property identification per MIL-STD-130N. Preservation must maintain a clean, dry condition (CLNG/DRY code 33) with a non-extendable shelf life of 180 months. Export control restrictions apply under ITAR or EAR, mandating that all technical data be handled only by contractors with JCP certification, who have completed DLA’s export-controlled data training and questionnaire, and are formally approved for access. Cybersecurity requirements are enforced via CMMC Level 2 certification, applicable to the contractor organization as a C3PAO, ensuring adequate safeguards for covered defense information. Inspection and acceptance occur at origin, governed by FAR 52.246-2, and all invoices must be submitted electronically through Wide Area WorkFlow. The contractor must also remove government markings from all rejected items and comply with U.S.-flag vessel mandates for ocean transport unless a formal
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 326299
New
DIBBS
PAD, CUSHIONING
Solicitation # SPE7L1-26-Q-1394
The contract is for the procurement of 15,000 units of a molded track cushioning pad assembly, identified by NSN 5340-01-587-6763, under solicitation SPE7L1-26-Q-1394. Delivery is required within 146 days of award, with the solicitation issued on August 4, 2026, and responses due by August 19, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and government identification must be removed from any non-accepted supplies prior to delivery. The item includes technical data subject to export control under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access this controlled data. The acquisition falls under NAICS code 326299 and is managed by the Department of Defense’s Land Supply Chain, with Rodney McNinch listed as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 326299
New
DIBBS
BELT, V
Solicitation # SPE7L3-26-T-146Z
This contract is for the procurement of one Belt, V with NSN 3030-01-539-5803 under solicitation SPE7L3-26-T-146Z, issued by the Department of Defense through Land Supplier Operations Vehicle Support. The item must be delivered within five days of award, FOB origin, with no variance allowed in quantity. Inspection and acceptance both occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specified preservation methods, wrapping, and marking requirements. The delivery address is the Distribution Management Office at Twenty-Nine Palms, California, with a designated shipping point and a unique military freight identifier for tracking. Shipment must use traceable freight methods; parcel post is prohibited. The required delivery date is August 5, 2026, and the solicitation closed on August 17, 2026, with technical and quality requirements governed by the DLA Master List referenced in the contract. All packaging and marking must align with DLA packaging directives, and the item’s unit of issue is each, with a total price of $1.00. The contract includes specific government-only fields for internal tracking and distribution codes.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
FLAME ARRESTER, VENT
Solicitation # SPE8ED-26-T-1217
The contract specifies the procurement of one flame arrester, vent with NSN 5430-01-724-2662 and part number 60-1006RK-01 from RKI INSTRUMENTS, INC., under solicitation SPE8ED-26-T-1217. Delivery is required within five days of award, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination facility. Sampling and quality verification must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances permitted unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes considered major. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes commercial standards like ASTM D3951. Packaging must comply with MIL-STD-129 and DLA packaging requirements RP001, with hazardous material handled according to TQ requirement IP025 and non-hazardous material commercially packaged per ASTM D3951 when not overridden by DLA requirements. All packaging must be marked and labeled appropriately, and palletization must follow DLA standards. The material must be shipped by the fastest traceable means, with parcel post prohibited, and delivered to Sierra Army Depot in Herlong, CA. The required delivery date is July 24, 2026, and government-use identifiers and shipping instructions are strictly defined, including a designated point of contact and electronic procurement link.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332216
New
DIBBS
HEATING UNIT, INFRAR
Solicitation # SPE8E5-26-T-3844
The contract is for the procurement of four heating units, infrared type, under NSN 3439-01-436-9799, with a delivery requirement of 167 days after date of award. The solicitation number is SPE8E5-26-T-3844, issued on August 5, 2026, with responses due by August 17, 2026, and is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision. The procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance specified at New Cumberland, Pennsylvania, zip code 17070-5002. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and government identification must be removed from any non-accepted items. Only products explicitly named and identified by part number in the purchase order are considered acceptable, with no alternative substitutes permitted. The item has no shelf life limitation. Primary point of contact is Ira Hedgepeth, reachable via email and phone provided in the contract data.
Saw Blade and Handtool Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROS
Solicitation # SPE8E8-26-T-5042
The contract is for the procurement of 29 units of AIR FILTER, ELECTROS with NSN 4460-01-692-2652 under solicitation SPE8E8-26-T-5042, issued as a total small business set-aside under NAICS code 333413. Delivery is required within 167 days of award, with shipments to be furnished FOB origin and inspected and accepted at destination, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and marking requirements, with no special marking codes applied, and palletization must follow DLA packaging standards. The supplies are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the original delivery deadline was October 28, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date or award date controls depending on acquisition size. The contract incorporates provisions for potential coverage of covered defense information and requires adherence to DLA transportation and freight procedures. The point of contact for this procurement is Alexis Selby of the Department of Defense.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
GAGE, PROFILE
Solicitation # SPE8E5-26-T-3780
The contract pertains to the procurement of 12 GAGE, PROFILE units under solicitation SPE8E5-26-T-3780, with a response deadline of August 17, 2026, and a delivery requirement within 167 days after order. The item is identified by NSN 5220-00-446-8307 and is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Item Unique Identification (IUID) compliance is mandatory in accordance with MIL-STD-130 and the DFARS 252.211-7003 clause. The contractor must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified through a qualified third-party assessment organization. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior government authorization. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of DOD export control training, and approval from the DLA controlling authority. The contracting office is the DLA New Cumberland Facility, with primary point of contact Khue Nguyen, and the place of performance is listed as New Cumberland, PA, 17070-5002. There is no shelf life requirement for this item.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATION
Solicitation # SPE8E6-26-T-4066
This contract pertains to the procurement of a Marker, Identification with NSN 7690-01-290-0175 and part number TKG0896-1, supplied by FRUEHAUF CORP, and is governed by stringent DLA packaging and quality requirements. The item is classified as a critical application item with a non-extendable Type I shelf life of 24 months, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the special marking code 32 for shelf-life identification. Packaging and palletization must adhere to DLA’s official procurement standards, and the item must be delivered FOB origin with no quantity variance allowed. Delivery is required within 36 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The unit of issue is PG, with a total quantity of 21 units, and the contract references technical and quality requirements from the DLA Master List, applicable as of the solicitation issue date. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the contract is issued under solicitation SPE8E6-26-T-4066 with a response deadline of August 17, 2026, and an original required delivery date of August 5, 2026.
Books Printing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
IMPELLER, FAN, AXIAL
Solicitation # SPE8E7-26-T-3511
The item sought is an axial fan impeller, identified by NSN 4140-01-561-8011, with a quantity of 21 units, required as a component of an Uninterruptible Power Supply within the Vestdavit RIB Davit System on LCS-1 vessels. Though the UPS is manufactured by GE INV, procurement must use Vestdavit’s part number 12271 through their government distributor, Scan Pacific Northwest LLC, with CAGE code 3ESE0. The solicitation, issued under contract number SPE8E7-26-T-3511, is governed by DLA packaging and technical quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. All supplies must comply with the requirement to remove government identification from non-accepted items. Delivery is due in 167 days after award, and the place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The NAICS code 333414 applies, and the contracting office is the DLA New Cumberland Facility under the Department of Defense, with Kelly Mitchell listed as the primary point of contact.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 321114
New
DIBBS
CORROSION PREVENTIVE C
Solicitation # SPE8ES-26-T-2509
This contract solicits a corrosion preventive compound identified by NSN 8030-01-722-1433 and part number ETCPRTU-2B3C from Chemeon Surface Technology, LLC, with a quantity of 5 containers delivered FOB destination under solicitation SPE8ES-26-T-2509. The item is classified as a Type 2 (Code 6) shelf life item with a 24-month extendable shelf life, subject to specific packaging and marking requirements outlined in MIL-STD-2073-1E and MIL-STD-129, including the Special Marking Code 33 for Type II shelf life. Packaging must comply with DLA procurement standards and the Hazardous Materials Packaging, Marking, and Shipping requirements, with all hazardous material documentation—including Safety Data Sheets and labeled containers—aligned with OSHA’s revised Hazard Communication Standard (29 C.F.R. 1910.1200) effective June 1, 2015. Suppliers must submit SDS and compliant labels for approval prior to award and ensure employee training on the new standards. The item must be delivered within 173 days of contract award, with a required delivery date of October 15, 2026, and a need ship date of February 1, 2027. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, with a strict zero variance in quantity and inspection and acceptance occurring at the destination. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the applicable revision depends on the solicitation or award date. All units of issue follow DoD authorized standards as aligned with ANSI X12.
Wood Preservation

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CASE, STORAGE AND TR
Solicitation # SPE8E6-26-T-4056
The contract pertains to the procurement of 35 units of a specific item identified by NSN 4240-01-654-9843 and part number 940210, with a unit price of $35.00, totaling $1,225.00. Delivery is required within 15 days of the contract award, FOB origin, with no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit containerization per DLA’s requirements. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA’s packaging standards. The product must be shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20. The item is subject to Defense Logistics Agency packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment and applies to covered defense information. The solicitation number SPE8E6-26-T-4056 was issued with a response deadline of August 17, 2026, and an original delivery target of September 19, 2026. The need ship date is set for August 5, 2026, indicating the timing for readiness. Performance occurs at the DLA New Cumberland facility, and all technical and quality standards referenced are controlled by the DLA Master List revision in effect on the RFP issue date. Inspection and acceptance occur at the destination point, and the contractor must be prepared to remove any government identification from non-accepted supplies. The ordering activity is the Department of Defense, with primary point of contact John Lieb at DLA, and the North American Industry Classification System code is 339113.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-26-T-2502
The contract specifies the procurement of 3 cases of 50-milliliter adhesive units, part number DP-460 from 3M Company, identified by NSN 8040-01-642-2514, with each case containing twelve units. The product is amber and off-white in color and must comply with a non-extendable 24-month shelf life requirement for a Type I (Code M) item. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling indicating Type I shelf life, and palletization must follow DLA packaging standards. Delivery is FOB destination, with a required delivery date of January 25, 2027, and a lead time of 173 days, subject to zero variance in quantity. The adhesive is classified as a hazardous material, requiring full compliance with OSHA’s revised Hazard Communication Standard, including submission of Safety Data Sheets (SDS) and approved HCS or CPSA/FHSA-compliant labels prior to award, along with employee training on the new requirements. Storage must be maintained between 60-80°F (15-27°C) to preserve shelf life. Technical and quality requirements are governed by the DLA Master List, and the contract incorporates provisions for handling covered defense information. All deliveries must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping logistics must follow DLAD procedural notes C19 and C20.
Adhesive Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336611
New
DIBBS
RAMP ASSY CORNER RH
Solicitation # SPE8E5-26-T-3818
This contract covers the procurement of 16 units of RAMP ASSY CORNER RH, identified by NSN 5440-01-553-0684 and part number 7017757152, under solicitation SPE8E5-26-T-3818. The item must be manufactured and delivered in strict compliance with technical specifications referenced from the DLA Master List of Technical and Quality Requirements, including welding and liquid penetrant nondestructive inspection standards per AWS D1.2. A certificate of conformance is required unless waived by a quality assurance letter of instruction, and all components must adhere to dimensional and assembly directives, particularly the prohibition against welding the strut base P12 to the gusset plate P18 as shown on the drawing; instead, P12 must be packaged separately with an instruction sheet included in each ramp assembly. The product must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization following DLA packaging requirements, and all packaging marked with the specified unit of issue and quantity per unit pack. Mercury and mercury-containing compounds are strictly prohibited unless exceptions apply for batteries, instruments, or weapon systems, and must meet secondary containment and shock-proof standards per NAVSEA 5100-003D. The contract mandates full compliance with federal safety regulations, including the submission of Safety Data Sheets and Hazard Communication Standard labels updated to the Globally Harmonized System, effective June 1, 2015, with supplier employee training required on these changes. Delivery is FOB origin with inspection and acceptance occurring at destination, and must be completed within 167 days of contract award, with a required ship date of February 1, 2027, and original delivery deadline of October 24, 2027. No quantity variance is permitted, and all items must be shipped to the DDSP New Cumberland Facility in Pennsylvania. The solicitation is a total small business set-aside under NAICS code 336611, with drawings available via DIBBS during the open solicitation period. The contract incorporates FAR clauses for inspection, conformance, and standard requirements, and all documentation, including technical data packages and revisions referenced, must align with the specified drawing revisions and dated configurations.
Ship Building and Repairing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
LIGHT, COCKPIT, AIRCRAFT
Solicitation # SPE8E7-26-T-3487
This contract pertains to the procurement of aircraft cockpit lighting components under solicitation SPE8E7-26-T-3487, issued by the Department of Defense through the DDSP New Cumberland Facility. The item, identified by NSN 6220-01-563-8636 and part number 937-000-10M, is supplied by Luminator Holding L.P and Leonardo Spa Helicopters Division, with a total quantity of 13 units at a unit price of $13.00, resulting in a total contract value of $169.00. Delivery is required within 153 days from the contract date, with FOB origin terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging standards, MIL-STD-129 for marking and labeling, and either TQ requirement IP025 for hazardous materials per FED-STD-313 or ASTM D3951 for non-hazardous commercial packaging, with the DLA standards overriding ASTM where applicable. All packaging must reflect the specified Unit of Issue and Quantity per Unit Pack, and palletization must adhere strictly to DLA guidelines. The contract is a total small business set-aside under NAICS code 333515, with a response deadline of August 17, 2026, and was posted on August 5, 2026. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, with a required ship date of January 18, 2027, and an original delivery deadline of February 27, 2027. No quantity variance is permitted. Transportation instructions are governed by DLAD Proc Note C19 for general shipment and C20 for first destination handling. Documentation for source approval and handling of covered defense information is required as stipulated by RC001 and RD003. All technical and quality requirements referenced via R or I numbers in the DLA Master List take precedence over any other standards. The primary point of contact for the contract is Kelly Mitchell, reachable via email and phone provided.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
SHEETING, REFLECTIVE
Solicitation # SPE8E5-26-T-3781
Reflective sheeting meeting specification 3M ScotchLite 3271, 24 inches nominal width by 50 yards nominal length, is procured under contract SPE8E5-26-T-3781 with NSN 9390-00-501-5145 and part number 7000030797. The contract requires 14 rolls, each defined as one RO equal to 50 yards, with no variance allowed in quantity. Delivery is FOB origin and must be completed within 167 days of award, with the original required delivery date set for June 11, 2027, and a need ship date of February 1, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R- and I-numbers, which supersede industry standards such as ASTM D3951. Packaging must comply with DLA Packaging Requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous material handled per Fed-Std-313 and TQ requirement IP025 if applicable, otherwise commercially packaged in accordance with ASTM D3951. Palletization must align with RP001, and all packaging must be labeled consistent with the specified Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at destination. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The solicitation was issued on August 5, 2026, with a response deadline of August 17, 2026, under the NAICS code 327999, and is managed by the Department of Defense through the DDSP New Cumberland Facility.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325510
New
DIBBS
SPECTRAL SELECTIVE COA
Solicitation # SPE8ES-26-T-2504
The contract calls for the delivery of Spectral Selective Coating in polyurethane form, specifically identified by NSN 8010-01-681-7475, with a total quantity of 16 boxes, each containing eight one-pint units. The coating must be dark gray, matching color chip number 36170, and packaged in accordance with DLA packaging requirements. Each unit package must include a MIL-STD-129 label featuring the lot or batch number. The product is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Hazardous material provisions require submission of Safety Data Sheets compliant with 29 C.F.R. 1910.1200, as mandated by OSHA’s revised Hazard Communication Standard effective June 1, 2015, along with corresponding labels aligned with either the HCS or the Consumer Product Safety Act and Federal Hazardous Substance Act. Suppliers must also certify that employees have been trained on the new SDS formats, labeling standards, and regulatory requirements. Physical identification of the bare item must comply with RQ017, and all government identification must be removed from non-accepted supplies per RQ011. Delivery is due within 34 days after contract award, with the solicitation issued on August 5, 2026, and responses due by August 11, 2026. The contract is administered by the Department of Defense through the DDSP New Cumberland Facility, with point of contact Stephen Ockenhouse.
Paint and Coating Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details