RUBBER SHEET, SOLID

RUBBER SHEET,SOLID
RUBBER SHEET, SOLID
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SYNTHETIC RUBBER
SMOOTH BOTH SIDES
36.000 INCHES SQUARE, 0.063 INCH THICK 45.0 MINIMUM SHORE DUROMETER A
AND 55.0 MAXIMUM SHORE DUROMETER
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
TYPE I ( 12 MONTH ) SHELF LIFE ITEM: MATERIAL FURNISHED UNDER THIS
CONTRACT/ORDER SHALL HAVE AT LEAST 85% OF THE SHELF LIFE REMAINING AT
TIME OF DELIVERY. SHELF LIFE MARKINGS (CURE AND EXPIRATION DATES) SHALL
BE IN ACCORDANCE WITH MIL-STD-129, LATEST REVISION, AND SHALL BE SHOWN
IN CALENDAR QUARTER AND YEAR.
NO ASBESTOS AS DEFINED IN FED-STD-313 IS
PERMITTED IN THIS ITEM
SPE8E9-26-T-3472
SECTION B
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
ITEM SHALL BE MARKED EVERY THREE (3) FEET WITH SPECIFICATION NUMBER AND
REVISION LETTER, TYPE AND CLASS. ALSO, QUARTER AND YEAR OF CURE OR
MANUFACTURE OF THE RUBBER COMPONENT IF REQUIRED. PERFORMANCE AND
LEGIBILITY SHALL BE IN ACCORDANCE WITH (I/A/W) PARAGRAPH 4.1 OF
MIL-STD-190. COLORS AND ENVIRONMENTAL RESISTANCE SHALL BE I/A/W TABLE I
OF MIL-STD-190. THIS REQUIREMENT IS IN ADDITION TO ANY MARKING
REQUIREMENTS CITED IN THIS CONTRACT. CONTRACTOR MUST CERTIFY THEIR
UNDERSTANDING OF BARE ITEM MARKINGS PRIOR TO AWARD.
THIS NSN IS PROCURED AS FULLY COMPETITIVE IN
ACCORDANCE WITH A MILITARY / FEDERAL
SPECIFICATION/STANDARD. SEE NSN/Part Number: 9320-00-641-3051 Quantity: 1 EA Purchase Request: 7017858881QTY: 1 Delivery: 20 days ADO