Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

O-RING

Active
SPE7M4-26-T-337SFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of O-rings under NSN 5331001651956, identified as critical application commercial items. The requirement is split across three delivery locations, including Tinker AFB, New Cumberland, and San Joaquin, with total quantities spanning 53, 2,506, and 3,397 units respectively. The manufacturer must be QPL approved at the time of award and adhere to SAE AS3209C and SAE AMS7276J standards. Delivery is required within 84 days, with specific need ship dates extending through 2028. Strict quality and material constraints apply, including a total prohibition of asbestos and the intentional addition of mercury. The items must meet NAVAIR aircraft launch and recovery equipment traceability requirements and be marked with the contract number, NAWC CAGE, and part number. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-117 to protect against ultraviolet ray deterioration using opaque, waterproof, and greaseproof bags. Inspection and acceptance will occur at the destination, with sampling conducted per MIL-STD-1916 or ASQ H1331.

General Info

Procurement of QPL approved O-rings for three locations with delivery by 84 days.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

(1)

SPE7M4-26-T-337S.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUSA
Contacts
Blake Tushar
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
O-RING
O-RING
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NO ASBESTOS AS DEFINED IN FED-STD-313 IS
PERMITTED IN THIS ITEM
CRITICAL ITEM SOURCE INSPECTION REQUIRED.
THIS NSN HAS QUALIFIED PRODUCTS LIST (QPL)
REQUIREMENTS.
.
THE MANUFACTURER FOR THE QPL ITEM MUST BE QPL
APPROVED AT THE TIME OF THE CONTRACT AWARD.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
SPE7M4-26-T-337S
SECTION B
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS MATERIAL MUST MEET NAVAIR AIRCRAFT LAUNCH &
RECOVERY EQUIPMENT TRACEABILITY REQUIREMENTS. BARE
ITEM MARKINGS SHALL BE IAW THE TECHNICAL DATA
DRAWINGS PROVIDED.
BARE ITEM MATERIAL SHALL BE MARKED WITH CONTRACT
NUMBER, NAWC CAGE, AND PART NUMBER UNLESS OTHERWISE
SPECIFICIED ON ASSOCIATED DRAWING. IF A CONFLICT
EXISTS WITH MARKING REQUIREMENTS OF THIS 82N ALRE/SE
ITEM, THE ASSOCIATED DRAWING REQUIREMENTS SHALL APPLY.
CRITICAL APPLICATION ITEM
TDP Rev D Gen 4 IAW BASIC NON GOVT STD SAE AS3209C REVISION NR C DTD 08/01/2021 PART PIECE NUMBER: AS3209-238
TDP Rev D Gen 4 IAW REFERENCE NON GOVT STD SAE AMS7276J REVISION NR J DTD 05/01/2020 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017600759 0001 EA 53.000
NSN/MATERIAL:5331001651956
DELIVERY (IN DAYS):0084
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B
UNIT CONT:BE OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
SPE7M4-26-T-337S
SECTION B
PR: 7017600759 PRLI: 0001 CONT’D
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:07/13/2028 Original Required Delivery Date:12/05/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M4-26-T-337S
SECTION B
PR: 7017600759 PRLI: 0002 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017600759 0002 EA 2,506.000
NSN/MATERIAL:5331001651956
DELIVERY (IN DAYS):0084
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B
UNIT CONT:BE OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B
UNIT CONT:BE OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
SPE7M4-26-T-337S
SECTION B
PR: 7017600759 PRLI: 0002 CONT’D
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/18/2028 Original Required Delivery Date:12/05/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0003 7017600759 0003 EA 3,397.000
NSN/MATERIAL:5331001651956
DELIVERY (IN DAYS):0084
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE7M4-26-T-337S
SECTION B
PR: 7017600759 PRLI: 0003 CONT’D
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B
UNIT CONT:BE OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B
UNIT CONT:BE OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B
UNIT CONT:BE OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
SPE7M4-26-T-337S
SECTION B
PR: 7017600759 PRLI: 0003 CONT’D
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:07/25/2026 Original Required Delivery Date:12/05/2026
SPE7M4-26-T-337S NSN/Part Number: 5331-00-165-1956 Quantity: 53 EA Purchase Request: 7017600759QTY: 5956 Delivery: 84 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-179X
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 58 gaskets under part number 5330-01-534-4874. The contract requires delivery within 148 days after the order is placed and is associated with NAICS code 339991. Performance is designated for Tracy, California. A critical component of this contract is the strict adherence to export control regulations, as the technical data is subject to ITAR or EAR restrictions. Access to this data is limited to contractors with an approved US/Canada Joint Certification Program certification who have completed the required Department of Defense training and questionnaires. Additionally, all shipments must comply with DLA packaging requirements for procurement.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SP
Solicitation # SPE4A1-26-T-2577
This contract is for the procurement of four special shaped nonmetallic seals, identified by NSN 5330015296802 and Sikorsky part number 70209-52426-131. The items are designated as critical application components and must be delivered within 20 days after the order. The contract specifies a maximum shelf life of 12 months in accordance with ASTM D6576 and strictly prohibits the use of asbestos. Key requirements include strict adherence to DLA packaging and marking standards, specifically requiring the use of medium duty, waterproof, greaseproof, and opaque bags to protect the items from ultraviolet rays. The contractor must maintain supply chain traceability documentation and follow specific sampling plans that meet or exceed ASQ H1331 or MIL-STD-1916. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination in Fort Rucker, Alabama.
AVIATION SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC RO
Solicitation # SPE7L1-26-T-967A
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of one nonmetallic Teflon seal under NSN 5330-00-860-0577. The contract requires delivery within five days after the order is placed and specifies that the item must adhere to DLA packaging requirements. The place of performance is located in Little Falls, Minnesota. A critical component of this contract is the strict adherence to export control regulations. The technical data associated with this item is subject to ITAR or EAR restrictions, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Department of Commerce. To access this data, contractors must hold an approved US/Canada Joint Certification Program certification and complete mandatory training and questionnaires required by the Defense Logistics Agency.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL RING, METAL
Solicitation # SPE7L4-26-U-1094
This solicitation from the Department of Defense, specifically the LSO Combat Vehicles and Armament agency, is for the procurement of 47 metal seal rings under solicitation number SPE7L4-26-U-1094. The items are identified by NSN 5330-01-265-0523 and part number 230-03-070-7026 from Renold, Inc. The contract is designated as a Total Small Business Set-Aside under NAICS code 339991, with a required delivery timeframe of 97 days after the order is placed. The procurement is subject to strict technical and quality standards, including DLA packaging requirements and the removal of government identification from non-accepted supplies. Material restrictions are explicitly stated, prohibiting the use of asbestos as defined in FED-STD-313 and the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions as outlined by NAVSEA. All technical and quality requirements are governed by the DLA Master List effective on the solicitation or award date.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-968A
This solicitation, issued by the Department of Defense Land Supply Chain agency, is for the procurement of 18 O-rings under NSN 5331-01-098-3825. The contract requires delivery within 35 days after the order is placed, with the place of performance located at Hill AFB. The solicitation number is SPE7L1-26-T-968A, and it falls under NAICS code 339991. The contract is subject to several strict technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. Notably, the project requires Cybersecurity Maturity Model Certification Level 2 and involves technical data subject to ITAR or EAR export controls. Access to this data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7M4-26-T-337T
This solicitation, issued by the Department of Defense Fluid Handling Division, seeks the procurement of 1,301 O-rings under NSN 5331-00-252-6047. The contract is open for full and open competition with a delivery requirement of 12 days after the order is received. All items must be manufactured according to current military or consensus non-government part standards and must be entirely free of asbestos. Compliance is required with DLA packaging and quality requirements, including specific sampling methods such as MIL-STD-1916 or ASQ H1331. The procurement emphasizes that any hardware produced from the date of solicitation must adhere to the most current revision of the applicable part standard. Quality assurance involves strict verification levels for critical, major, and minor attributes to ensure all supplied components meet federal specifications.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-967N
This contract is a solicitation issued by the Department of Defense Land Supply Chain for the procurement of nine gaskets, identified by NSN 5330-01-714-2809 and part number PG775000-31. The agreement specifies a delivery timeline of 20 days after order, with the original required delivery date set for August 11, 2026. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the destination in Westhampton Beach, New York. The contract mandates strict adherence to technical and quality requirements, including DLA packaging standards and MIL-STD-129 for marking. Because the items are susceptible to ultraviolet ray deterioration, they must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Shipments must be sent via the fastest traceable means to the specified address, and the contractor must comply with regulations regarding the removal of government identification from non-accepted supplies and the handling of covered defense information.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
PARTS KIT, SEAL REPLACE
Solicitation # SPE7L3-26-T-174Y
This contract is for the procurement of five seal replacement parts kits for mechanical equipment under solicitation number SPE7L3-26-T-174Y. The items are identified by NSN 5330-00-886-5843 and must adhere to specific technical drawings and quality requirements, including the use of ASTM-D2000 instead of MIL-R-3065. A critical requirement is that the items must contain no asbestos and are classified as Type I items with a non-extendable shelf life of 36 months. Delivery is required within 190 days to the DLA Distribution New Cumberland facility in Pennsylvania, with a required delivery date of March 3, 2027. The contract mandates strict packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1, and requires the use of waterproof, greaseproof, opaque bags to protect the materials from ultraviolet rays. Inspection and acceptance will take place at the destination, with shipping terms set as FOB Origin.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7L3-26-T-179U
This solicitation is for the procurement of four plain encased seals, identified by NSN 5330-00-947-0077, with a delivery requirement of 362 days after order. Offerors are encouraged to provide quantity ranges to accommodate potential demand volatility and must disclose any non-domestic materials to comply with the Berry Amendment and Buy American Act. The solicitation prohibits the use of additive manufacturing unless specifically authorized and requires a representation that no covered telecommunications equipment or services will be provided. Contractors must be aware of upcoming changes to the Vendor Shipment Module, which will soon require registration via the Account Management and Provisioning System for access and shipping. Small business joint ventures are required to submit specific representations and certifications. Those unable to quote by the deadline should submit a No Bid response with an anticipated quote date to maintain communication with the buyer.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-967G
This contract is for the procurement of one O-ring, identified by NSN 6515-01-536-3302 and part number AH179 from Gast Manufacturing Co. The agreement specifies a delivery timeline of 20 days with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The item is to be delivered to the US Army AWCF SSF at Fort Campbell, Kentucky, with a required delivery date of August 11, 2026. The contract mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-2073-1E and MIL-STD-129. It specifically prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions. Additionally, any wood packaging material used must comply with clause 52.247-9012 regarding heat treatment or kiln-drying to meet Department of Defense standards.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
PACKING ASSEMBLY
Solicitation # SPE7M4-26-T-337L
This solicitation is for the procurement of 562 packing assemblies under NSN 5330-01-381-4830 for the Department of Defense Fluid Handling Division. The contract is a total small business set-aside with a delivery requirement of 536 days after order. Performance will take place at Robins Air Force Base, and the response deadline for solicitation SPE7M4-26-T-337L is August 24, 2026. Compliance requirements include adherence to DLA packaging standards and CMMC Level 2 certification via a certified third-party assessment organization. Additionally, the contract involves technical data subject to ITAR or EAR export controls, requiring contractors to hold an approved US/Canada Joint Certification Program certification and complete specific DLA export-control training and questionnaires to gain access to the data.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL ASSEMBLY
Solicitation # SPE7L3-26-U-0687
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 68 seal assemblies under NSN 5330-01-155-9331. The contract is designated as a total small business set-aside under NAICS code 339991. Delivery is required within 97 days after the order is placed. The procurement is subject to specific technical and quality requirements, including DLA packaging standards and the mandatory removal of government identification from any non-accepted supplies. Additionally, the items must be free of asbestos as defined by FED-STD-313. Interested parties must respond by August 28, 2026, regarding solicitation number SPE7L3-26-U-0687.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, METALLIC
Solicitation # SPE7M4-26-Q-0958
This contract is a solicitation for the procurement of 41 metallic hose assemblies under NSN 4720-00-827-4988. The agreement is established as a Firm Fixed Price contract with a total small business set-aside. Delivery is required within 207 days after order, with the final destination for inspection and acceptance being DLA Distribution San Joaquin in Tracy, California. The items are designated as critical application items, and several approved manufacturers are listed, including Smiths Tubular Systems, Parker Hannifin Corp, Senior Operations LLC, Flexible Metal Inc, and Pacific Aero Components. Strict compliance is required regarding the prohibition of Class I ozone depleting chemicals and adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129. All technical and quality requirements are governed by the DLA Master List.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 21 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-337H
This contract is for the procurement of 248 nonmetallic hose assemblies, identified by NSN 4720017030478 and part number 12701503. The order is governed by technical drawing 19207 12701503 Revision D and requires strict adherence to DLA quality and packaging standards, including MIL-STD-2073-1E and MIL-STD-129. A critical environmental restriction prohibits the use of Class I ozone depleting chemicals in the manufacture or incorporation of the items. The delivery is set for 177 days after order, with a required delivery date of February 18, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The contractor must maintain supply chain traceability documentation per DLA Directive C03 and ensure all packaging and palletization comply with RP001 requirements. This is a total small business set-aside under NAICS code 326220.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7M4-26-T-337P
This contract is for the procurement of 13 nonmetallic hose assemblies under solicitation SPE7M4-26-T-337P for the Department of Defense Fluid Handling Division. The items must be manufactured according to technical drawing 19207 12506132 Revision D and comply with ISO 9001 quality standards. A First Article Test requirement is included as a separate line item to verify product compliance before full delivery. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements, MIL-STD-129 labeling, and ASTM D3951 standards. Additionally, the use of Class I ozone-depleting chemicals is strictly prohibited. The required delivery date for the primary quantity is January 12, 2027, with a delivery window of 188 days.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-337M
This contract is for the procurement of 177 feet of metallic aluminum tubing, identified as a critical application commercial item. The tubing must have an outer diameter of 0.375 inches, a wall thickness of 0.028 inches, and be provided in random lengths between 10 and 12 feet with a T6 temper. It must adhere to SAE AMS 4083K specifications and be capable of a maximum operating pressure of 3,000 psi. The agreement specifies a delivery timeframe of 170 days with a required delivery date of April 13, 2027, shipping FOB Origin to DLA Distribution Depot Hill. Quality assurance requires inspection and acceptance at the origin, following MIL-STD-1916 or ASQ H1331 sampling plans. Packaging and preservation must comply with MIL-STD-2073-1E and ASTM B660, and the contract strictly prohibits the use of Class I ozone-depleting chemicals.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
TUBING, NONMETALLIC
Solicitation # SPE7M4-26-T-337K
This contract is for the procurement of 50 units of nonmetallic tubing, identified by NSN 4720-01-663-4733, for the Department of Defense Fluid Handling Division. The items are designated as critical application components for Denel vehicle systems. Delivery is required within 74 days, with a specified need ship date of September 17, 2024, and a final delivery date of September 25, 2024. The shipment is to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA technical and quality requirements, including the prohibition of Class I ozone-depleting chemicals. The tubing is classified as a Type I item with a non-extendable shelf life of 180 months, requiring specific markings per MIL-STD-129 on all packaging levels. Packaging and palletization must comply with MIL-STD-2073-1E and RP001 DLA packaging requirements. Inspection and acceptance will take place at the point of origin.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
CLAMP, HOSE
Solicitation # SPE7M3-26-T-8244
This contract is for the procurement of 28 aluminum alloy hose clamps with a 3.563 inch inner diameter, identified by NSN 4730-01-070-7965 and part numbers DEA-02287 and C9557-1. The items are designated as critical application items and must adhere to specific technical drawings and quality standards, with a strict prohibition on porosity and surface defects around bolt holes. Delivery is required within 256 days, with a need ship date of May 8, 2027, to the DLA Distribution facility in New Cumberland, Pennsylvania. Quality assurance is stringent, requiring DCMA inspection and acceptance at the origin. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, and the use of Class I ozone-depleting chemicals is strictly prohibited. The contract incorporates the DLA Master List of Technical and Quality Requirements and specifies a zero percent quantity variance.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336214
New
DIBBS
ENGINE CONTROL UNIT
Solicitation # SPE7M4-26-T-337A
This contract is a solicitation issued by the Department of Defense Fluid Handling Division for the procurement of one Engine Control Unit, specifically Perkins Engines Inc part number 28170119 with NSN 2010016533125. The agreement specifies a delivery timeline of 20 days after order, with the final required delivery date set for August 11, 2026. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination. The item must be delivered to the Commander Naval Air Force Pacific Fleet at Naval Air Station North Island in San Diego, California. Strict adherence to DLA packaging requirements, MIL-STD-2073-1E for preparation, and MIL-STD-129 for marking is required. The shipment must be sent via the fastest traceable means, and the use of parcel post is explicitly prohibited.
Travel Trailer and Camper Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
TUBING, NONMETALLIC
Solicitation # SPE7M4-26-T-337F
This contract is for the procurement of 655 feet of non-metallic rubber tubing with a 1.25 inch inner diameter and 1.5 inch outer diameter. The item is designated as a critical application component with a non-extendable shelf life of 120 months. It must adhere to technical specifications MIL-PRF-6855 and MIL-STD-129R, and the contractor is prohibited from intentionally adding mercury or mercury-containing compounds to the hardware. The agreement requires First Article Testing (FAT) and government source inspection at the point of origin. Delivery is set as FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania, with a quantity variance allowance of plus or minus 10 percent. Packaging and marking must comply with MIL-STD-2073-1E and DLA packaging requirements.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
ELBOW, PIPE TO HOSE
Solicitation # SPE7M3-26-T-8246
This contract is for the procurement of pipe-to-hose elbows made from cadmium-plated copper alloy, featuring a 90-degree flow angle with a 3/8 inch ID hose size and a 1/4 inch nominal pipe size. The items are designated as critical application components and must be produced by an accredited manufacturer listed on the PRI Qualified Manufacturer List or Qualified Products List. The total quantity required is 153 units, split between two delivery locations: 71 units to DLA Distribution Barstow and 82 units to DLA Distribution Albany. The delivery period is set at 161 days after the order, with a required delivery date of May 12, 2027. Compliance with various military standards is mandatory, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals and requires adherence to DLA packaging requirements. Shipping is FOB Origin, and inspection and acceptance will occur at the destination.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
NIPPLE, PIPE
Solicitation # SPE7M3-26-T-8240
This contract is for the procurement of 42 units of CRES material pipe nipples, measuring 1.00 inch at all ends, conforming to SAE J514-3 standards for hydraulic tube fittings. The order is identified by NSN 4730-01-540-5369 and part number 16-16 140137SA. Delivery is required within 218 days, with a final need date of March 31, 2027, shipped FOB Origin to DLA Distribution Anniston in Alabama. The supplier must adhere to strict quality and technical requirements, including DLA packaging standards, MIL-STD-129 labeling, and ASTM D3951 packaging. Sampling and inspection will be conducted at the destination according to MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the use of Class I ozone depleting chemicals in the production or delivery of the items.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-337Z
This contract is for the procurement of 41 nonmetallic hose assemblies under solicitation SPE7M4-26-T-337Z for the Department of Defense Fluid Handling Division. The items are identified by NSN 4720013765640 and correspond to part numbers AS213H0180G from Eaton Aeroquip LLC and 7D0181E0180B from The Boeing Company. This is designated as a critical application item with a delivery requirement of 133 days after order, featuring a need ship date of January 5, 2027, and an original required delivery date of April 14, 2027. The agreement specifies delivery FOB Origin with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements RP001. The contract also incorporates technical and quality requirements from the DLA Master List and mandates the removal of government identification from any non-accepted supplies.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
MAST, ASSY, CANOPY
Solicitation # SPE7M4-26-T-337Q
This solicitation, issued by the Department of Defense Fluid Handling Division, is for the procurement of 92 units of Canopy Mast Assemblies under part number 2040-00-883-2002. The contract is designated as a Total Small Business Set-Aside under NAICS code 332510, with a required delivery timeframe of 161 days after receipt of order. Performance is centered in New Cumberland, Pennsylvania. Compliance requirements are stringent, requiring the contractor to be a CMMC Level 2 Certified Third-Party Assessment Organization. Additionally, the project involves technical data subject to ITAR and EAR export controls, necessitating prior authorization from the Department of State or Commerce and an approved US/Canada Joint Certification Program certification. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details