Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supplier of Nonmetallic Medium Pressure Hydraulic Hose

Active

Federal

Response Deadline10/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of rubber-covered, one-wire braid, medium-pressure nonmetallic hydraulic hoses for prime contractors working on Department of Defense Fluid Handling Division projects. The specific requirement is for one Nonmetallic Hydraulic Hose under NSN 4720-01-701-0915, featuring a 2.38 inch inner diameter, a minimum bending radius of 24 inches, and an operating pressure of 350 psi. To ensure quality and safety, the manufacturer must perform burst test certification up to 1400 psi and maintain strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards. The contract falls under NAICS code 326220, with the place of performance located at FPO 96678.

General Info

Supply one nonmetallic hydraulic hose for DoD projects meeting specific pressure and MIL-STD standards.

Agency

Department Of Defense → FLUID HANDLING DIVISION

NAICS

326220 - Rubber and Plastics Hoses and Belting Manufacturing

Place of Performance

FPO, AP, 96678, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-26-T-9886.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HOSE, NONMETALLIC

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 27

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 05:00:00 PM UTCin 1 day

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies rubber-covered, one-wire braid, medium-pressure nonmetallic hydraulic hoses for prime contractors on Department of Defense Fluid Handling Division projects. Manufactures hoses with 2.38 inch ID, 24 inch minimum bending radius, and 350 psi operating pressure. Performs burst test certification to 1400 psi. Complies with MIL-STD-2073-1E and MIL-STD-129. Delivers one Nonmetallic Hydraulic Hose (NSN 4720-01-701-0915).

Similar Contracts

Same NAICS industry code

O-Rings and Gaskets Supplier (NSN 4910-01-536-8790 Kit Components)This subcontract opportunity is for the supply of specialized o-rings and gaskets to support prime contractors under the DLA Weapons Support LSO Combat Vehicles and Armament projects. The selected provider will be responsible for manufacturing or sourcing rubber and elastomeric seals in strict accordance with Drawing NR 16236 4910VE17130. To ensure product integrity, all items must be delivered in packaged seals using Code HB cushioning and opaque barrier bags meeting MIL-DTL-117 Type II, Class C, Style 1 or MIL-PRF-121 Type I standards. The contract requires full supply chain traceability as mandated by DLAD C03. This is a Women-Owned Small Business set-aside under NAICS code 326220 for the Department of Defense. Interested parties must submit their responses by November 12, 2026, to provide the necessary kit components associated with NSN 4910-01-536-8790.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 23 hours ago

DEADLINE

Manufacturer of Nonmetallic Special Shaped Section Seal (NSN 5330-01-681-5487)This subcontract involves the manufacture and supply of one nonmetallic special shaped section seal for prime contractors supporting DLA Weapons Support Land Supplier Operations. The contractor is required to produce part number 12621762 in accordance with NSN 5330-01-681-5487 specifications, utilizing asbestos-free materials and adhering to the DLA Master List of Technical and Quality Requirements RA001. A critical delivery requirement is that the seal must have a remaining shelf life of 153 months upon receipt. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle Spt agency, with the place of performance located at Fort Hood. The procurement falls under NAICS code 326220. Interested parties must note the response deadline of November 9, 2026, for this specific manufacturing requirement.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 23 hours ago

DEADLINE

Nonmetallic Fire Fighting Hose Assembly SupplierThis subcontract, issued by the Department of Defense through the DDSP New Cumberland Facility, requires the manufacture and supply of 116 nonmetallic fire fighting hose assemblies for prime contractors fulfilling DLA supply contracts. The specific requirements call for Type B noncollapsible synthetic rubber hose assemblies measuring 1.5 inches in internal diameter and 50 feet in length, equipped with 1.5 inch NPSH thread brass couplings. All products must strictly adhere to MIL-SPEC standards for synthetic rubber noncollapsible fire fighting hoses and meet DLA quality conformance standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 326220, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 23 hours ago

DEADLINE

Supply of Preformed Hose (Oshkosh Defense P/N 3778176)This subcontract involves the supply of preformed hoses for prime contractors under the Department of Defense, specifically for the DLA Weapons Support Fluid Handling Division. The scope of work focuses on NSN 4720015702332 and Oshkosh Defense part number 3778176, requiring the manufacturer to source or produce components that strictly adhere to OEM technical specifications. The contractor is responsible for ensuring all deliverables are packaged and labeled in accordance with MIL-STD-129 and RP001 standards. Additionally, the agreement mandates full compliance with the Buy American Act and the DLA Master List of Technical and Quality Requirements. Performance for this contract is centered in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

Supply of Specialized O-Rings (NSN 5331-01-669-5446)This subcontract involves the manufacture or procurement of specialized O-rings under NSN 5331-01-669-5446 to support prime contractors for the Department of Defense DLA Weapons Support Maritime Supply Chain. The contractor must ensure all materials are ozone-compliant and asbestos-free, with a requirement to deliver two O-rings to the Naval Facility in Everett, Washington. Full supply chain traceability is mandatory for these components. Strict adherence to military standards is required for the fulfillment of this order. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-117 to ensure adequate UV protection, while all marking must follow MIL-STD-129. The project falls under NAICS code 326220, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 23 hours ago

DEADLINE

Supplier of Elastic Cord Assemblies (NSN 4020-01-572-0958)This subcontract involves the manufacture or sourcing of 1,092 linear feet of elastic cord assemblies meeting NSN 4020-01-572-0958 specifications for prime contractors supporting DLA Troop Support. The selected supplier must ensure all products are marked and labeled according to MIL-STD 129 and strictly adhere to the DLA Master List of Technical and Quality Requirements RA001. Managed under the Department of Defense with performance located in New Cumberland, Pennsylvania, the contract requires the supplier to maintain an active SAM registration to facilitate access to the Wide Area Workflow system. Interested parties must submit their responses by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 23 hours ago

DEADLINE

Supply of Nonmetallic Hose Assemblies (NSN 4720-01-575-2249)This subcontract involves the manufacture or sourcing of 2,000 nonmetallic hose assemblies under NSN 4720-01-575-2249 for the Department of Defense, specifically supporting DLA Weapons Support Maritime Supply Chain contracts. The contractor must ensure all assemblies meet shelf-life specification RS030 and strictly adhere to the Buy American Act and Berry Amendment requirements. Performance will take place in Texarkana, Texas, with all items required to be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards. The opportunity is categorized under NAICS code 326220, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 23 hours ago

DEADLINE

Plastic Spiral Wrap Tubing SupplierThis subcontract involves the manufacture or procurement of 551 feet of plastic spiral wrap tubing meeting NSN 9330-01-345-2863 for prime contractors supporting Department of Defense supply contracts. The materials must be packaged according to ASTM D3951 and RP001 standards and labeled in compliance with MIL-STD-129. Delivery is required FOB Origin to DLA Distribution San Joaquin in Tracy, California. The supplier must adhere to strict regulatory requirements, including DLA RA001 and DFARS 252.204-7012 cybersecurity reporting standards. This opportunity falls under NAICS code 326220 and is managed by the Defense Logistics Agency.

DLA DIST SAN JOAQUIN

POSTED

about 23 hours ago

DEADLINE

Supply of Air Duct Hose (NSN 4720-01-644-8426)This subcontract involves the supply of one 4.000-inch I.D. air duct hose for prime contractors supporting DLA supply contracts for the Naval Air Warfare Center Air Division. The equipment must strictly adhere to NSN 4720-01-644-8426 and DLA Master List technical specifications. All materials are required to be DFARS compliant and free of Class I ozone-depleting chemicals. The contractor is responsible for packing and marking the items in accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001. Performance will take place in Patuxent River, with the final deliverable being the completed and accepted hose. This requirement is managed under the Department of Defense through the DLA Weapons Support Fluid Handling Division.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

Supplier of Lacing and Tying Tape (NSN 4020-01-474-2482)This subcontract involves the manufacture or distribution of lacing and tying tape to support prime contractors delivering on Department of Defense supply contracts. The specific requirement is for 73 units of NSN 4020-01-474-2482, with performance taking place at Hill AFB. All materials must adhere to technical specification CID A-A-52084B and the DLA Master List of Technical and Quality Requirements. Compliance standards are strict, requiring packaging per ASTM D3951 and RP001 and marking according to MIL-STD-129. To be eligible, suppliers must be listed on the Qualified Suppliers List for FSC 4020. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026, under NAICS code 326220.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 23 hours ago

DEADLINE

Nonmetallic Hose Material SupplierThis subcontract involves the supply of nonmetallic hose for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The required material must be equivalent to McMaster-Carr Part No. 5296K331 or Electric Boat Corporation Part No. H5410252-122, with a strict prohibition on the use of additive manufacturing. All deliverables must adhere to the DLA Master List technical requirements and maintain RQ018 traceability. The contract mandates full compliance with the Berry Amendment and the Buy American Act. The supplier is responsible for delivering 3.417 units of hose on a FOB Origin basis. Performance for this requirement is centered in New Cumberland, Pennsylvania, under NAICS code 326220.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

Nonmetallic Hose Assembly ManufacturerThis subcontract involves the manufacture and supply of 170 nonmetallic hose assemblies for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The contractor is responsible for fabricating the assemblies according to NSN 4720-01-673-8548 and the DLA Master List of Technical and Quality Requirements, ensuring all units are completed, marked, and delivered. Strict quality and security standards are required for this engagement, including SAE AS9003 or ISO 9001 quality systems and NIST SP 800-171/CMMC Level 2 compliance. Additionally, all products must be packaged in accordance with ASTM D3951 and MIL-STD-129. The place of performance is located at Tinker AFB, and the response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

U.S.-Flag Ocean Transportation ServicesThis subcontract involves providing U.S.-flag ocean freight transportation services for prime contractors supporting DLA Land and Maritime supply contracts. The primary objective is the transport and delivery of 92 canopy mast assemblies to the port of final discharge, ensuring all operations comply with MARAD and Department of Defense regulations. The contractor is required to provide documented evidence of diligent efforts to secure U.S.-flag vessels and must be rated on the board vessel operating carrier's ocean bills of lading. Managed under the Department of Defense Fluid Handling Division, the project falls under NAICS code 488510. Performance is associated with New Cumberland, Pennsylvania. The solicitation was posted on October 28, 2026, with a response deadline of November 2, 2026.

Freight Transportation Arrangement

POSTED

about 23 hours ago

DEADLINE

Manufacture and Supply of Canopy Mast AssembliesThis subcontract involves the manufacture and supply of 92 canopy mast assemblies for prime contractors supporting Department of Defense DLA Land and Maritime supply contracts. The provider is responsible for producing or sourcing NSN 2040008832002 in strict accordance with the DLA Master List of Technical and Quality Requirements. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332999. To qualify for this engagement, the contractor must possess specialized tooling necessary for assembly production and maintain CMMC Level 2 certification validated by a C3PAO. The solicitation was posted on October 28, 2026, with a response deadline of November 2, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

MAST, ASSY, CANOPY

Solicitation # SPE7M4-26-T-366K

Solicitation SPE7M4-26-T-366K is a small business set-aside request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 92 units of Canopy Mast Assemblies (NSN 2040-00-883-2002). The requirement specifies a delivery period of 146 days after receipt of order, with a need ship date of February 2, 2027, and a final required delivery date of April 19, 2028. Delivery is established as FOB Origin, with the destination being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract imposes stringent technical and security requirements, including CMMC Level 2 certification and compliance with ITAR or EAR export controls for technical data. Quality assurance is managed through the DLA Master List of Technical and Quality Requirements, with manufacturer inspection systems requiring compliance with SAE AS9003 or ISO 9001. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling. Evaluation for award includes a price preference for HUBZone small businesses and requires offerors to provide components from qualified QPL or QML sources. Invoicing and payment are processed electronically via Wide Area WorkFlow.

Hardware Manufacturing

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE7M4-26-T-373Q

Solicitation SPE7M4-26-T-373Q is a request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 108 units of air duct hose, identified by NSN 4720015313141 and HDT Expeditionary Systems Inc part number 064-00027. The contract is categorized under NAICS code 326220 and is designated as a small business set-aside. Delivery is required within 214 days after order, with a need ship date of April 11, 2027, and an original required delivery date of June 14, 2027. The items are to be delivered FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California, with inspection and acceptance occurring at the destination. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, specifically referencing RA001 and RQ011 for the removal of government identification from non-accepted supplies. Packaging must adhere to ASTM D3951 and RP001 for palletization, while all marking and labeling must comply with MIL-STD-129. The contract incorporates several FAR and DFARS clauses, including those for basic safeguarding of covered contractor information systems, the Buy American Act, and the safeguarding of covered defense information. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 23 hours ago

DEADLINE

MICEE BAG ASSEMBLY

Solicitation # SPE7M4-26-T-377F

Solicitation SPE7M4-26-T-377F is a federal procurement issued by the Defense Logistics Agency for the supply of one MICEE Bag Assembly, identified by NSN 4710015896794 and part number T00244-5083. The contract is categorized under NAICS code 331420 and requires delivery within 20 days after order. The item is to be shipped FOB Origin to the Distribution Management Office at Camp Pendleton, California, with an original required delivery date of August 27, 2026. Inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, while ensuring that DLA Master List technical and quality requirements take precedence. Palletization must comply with RP001. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and cybersecurity standards under DFARS 252.204-7012. The procurement is managed by the Fluid Handling Division of the Department of Defense.

Copper Rolling, Drawing, Extruding, and Alloying

POSTED

about 23 hours ago

DEADLINE

HOSE ASSEMBLY, METALLIC

Solicitation # SPE7M4-27-T-0166

Solicitation SPE7M4-27-T-0166, issued by the DLA Land and Maritime Fluid Handling Division, is a request for quotation for one metallic hose assembly, identified by NSN 4720-01-286-0227 and part number 34738 from Hyspan Precision Products, Inc. The procurement falls under NAICS 332912 and is intended for delivery to the USNS Laramie (T AO 203) at FPO AE 09577. The required delivery date is September 29, 2026, with a delivery lead time of 20 days after order. Shipping must be handled via the fastest traceable means, specifically excluding parcel post, with FOB Destination terms. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with additional palletization requirements per DLA requirement RP001. Technical and quality standards are governed by the DLA Master List, and the use of additive manufacturing is prohibited unless authorized in writing. Key compliance mandates include the Buy American Act, DFARS cybersecurity standards for safeguarding covered defense information, and a prohibition on the intentional addition of mercury. Inspection and acceptance will occur at the destination per FAR 52.246-2. Invoicing and payment must be processed electronically through the Wide Area Workflow system.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 23 hours ago

DEADLINE

Metal Hose Assembly Manufacturer (NSN 4720-01-547-8193)This subcontract involves the manufacture and supply of 12 specialized metal hose assemblies for prime contractors supporting the Department of Defense Fluid Handling Division. The assemblies must be fabricated in strict accordance with NSN 4720-01-547-8193 and the DLA Master List of Technical and Quality Requirements. Delivery of the completed units is required FOB Origin, with marking and packing adhering to MIL-STD-129 and ASTM D3951 standards respectively. To be eligible, the manufacturer must hold ISO 9001:2015 and JCP certifications, as well as DLA Controlling Authority Authorization. The project falls under NAICS code 339999 and is associated with a performance location in New Cumberland. Interested parties must adhere to the response deadline of October 30, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Supply of Fluid Orifice Plate (NSN 4730017015377)This subcontract through the Department of Defense Fluid Handling Division involves the procurement and delivery of one Fluid Orifice Plate, part number 23509-400-1, with NSN 4730017015377. The item must be manufactured and delivered according to Sargent Aerospace and Defense specifications, while strictly adhering to DLA R001 packaging requirements and the DLA Master List of Technical and Quality Requirements. The contract is designated under NAICS code 423830 and requires delivery FOB Origin within 20 days after the order is placed. Performance for this requirement is centered in Mechanicsburg, Pennsylvania.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Fluid-Emulsion Spray Nozzle Manufacturer (NSN 4730-01-693-4850)This subcontract involves the manufacture and supply of one fluid-emulsion spray nozzle for prime contractors supporting Department of Defense DLA Land and Maritime fluid handling projects. The nozzle must be fabricated according to NSN 4730-01-693-4850 specifications using non-additive manufacturing processes and must be packaged in compliance with MIL-STD-2073-1E. The selected provider must hold US/Canada Joint Certification Program certification and be authorized to handle ITAR and EAR technical data. Performance will take place at FPO 96691-1500, with a response deadline set for October 30, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

PLATE, ORIFICE, FLUID

Solicitation # SPE7M3-26-T-7207

Solicitation SPE7M3-26-T-7207 is a request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of one fluid orifice plate. The required item is identified by NSN 4730017015377 and corresponds to Sargent Aerospace and Defense, LLC part number 23509-400-1. The procurement is designated as a small business set-aside under NAICS code 326122. Delivery is required within 20 days after receipt of order, with an original required delivery date of June 29, 2026. The shipping terms are FOB Origin, and the item is to be delivered to the NAVSEALOGCEN Warehouse Operations in Mechanicsburg, Pennsylvania. The contract mandates strict adherence to technical and quality standards, including the DLA Master List of Technical and Quality Requirements, ASTM D3951 for packaging, and MIL-STD-129 for marking and labeling. Specific prohibitions are in place regarding the use of Class I ozone-depleting chemicals and the acquisition of munitions list items from Communist Chinese sources. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various DFARS and FAR clauses covering cybersecurity, whistleblower rights, and the Buy American Act.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

NOZZLE, SPRAY, FLUID-

Solicitation # SPE7M3-26-T-8106

Solicitation SPE7M3-26-T-8106 is a small business set-aside request for quotation issued by the Department of Defense, specifically the DLA Land and Maritime Fluid Handling Division. The contract is for the procurement of one fluid-emulsion spray nozzle, identified by NSN 4730-01-693-4850. The item is destined for the USS Daniel Inouye DDG 118, with a required delivery date of July 13, 2026, and a delivery window of 20 days after receipt of the order. Shipping is designated as FOB Origin, and both inspection and acceptance will occur at the destination. This procurement is subject to strict export controls under ITAR and EAR regulations, requiring offerors to possess an approved US/Canada Joint Certification Program certification and DLA authorization to access technical data. The award process may be automated and includes a price evaluation preference for HUBZone small business concerns. Technical requirements are governed by the DLA Technical and Quality Master List, and items produced via additive manufacturing are ineligible for award. Compliance with the Buy American Act, Berry Amendment, and DFARS cybersecurity reporting standards is required. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

HOSE, NONMETALLIC

Solicitation # SPE7M4-26-T-9886

Solicitation SPE7M4-26-T-9886, issued by the Department of Defense Fluid Handling Division, is for the procurement of one nonmetallic hydraulic hose, specifically a rubber covered, one wire braid, medium pressure hose under NSN 4720-01-701-0915. The technical specifications require an inside diameter of 2.38 inches, a minimum inside bending radius of 24.00 inches, a maximum operating pressure of 350.0 lbs psi, and a burst test pressure of 1400.0 lbs psi. Delivery is required within 20 days after receipt of order, with the destination and acceptance point located at FPO AP 96678. The acquisition is categorized under NAICS code 326220 and incorporates a HUBZone price evaluation preference. Compliance with the Buy American Act and the Berry Amendment is required for quotes above the micro-purchase threshold. Offerors must maintain active registration in the System for Award Management and meet NIST SP 800-171 cybersecurity assessment requirements. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, and all electronic invoicing must be processed through the Wide Area WorkFlow system.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS