RUBBER SHEET, SOLID
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
The contract specifies the procurement of a solid rubber sheet measuring 36 inches square and 0.063 inch thick, with a Shore durometer range of 45.0 minimum to 55.0 maximum, and smooth surfaces on both sides. The material must be synthetic rubber, free of asbestos as defined in FED-STD-313, and cannot contain mercury or mercury-containing compounds except in limited functional applications such as batteries, fluorescent lights, sensors, controls, weapon systems, or specified chemical reagents approved by NAVSEA; portable devices containing mercury must be shock-proof with a secondary containment boundary. The item is classified as a Type I shelf-life product with a 12-month lifespan, requiring at least 85% of that life to remain at delivery, with cure and expiration dates marked per MIL-STD-129 in calendar quarter and year format. All shipments must comply with DLA packaging requirements and the technical and quality standards listed in the DLA Master List, with sampling performed in accordance with MIL-STD-1916, ASQ H1331, or a comparable zero-based plan, where acceptance requires zero non-conformances unless otherwise stated. The rubber sheet must be marked every three feet with the specification number, revision letter, type, class, and cure or manufacture date in quarter and year, with markings meeting MIL-STD-190 for performance, legibility, color, and environmental resistance. The contractor must certify understanding of bare item marking requirements prior to award. The NSN 9320-00-641-3051 is procured competitively under a federal specification, with one unit required for delivery within 20 days of award under solicitation SPE8E9-26-T-3270, issued by the Department of Defense’s Construction & Equipment MRO Service I, with primary point of contact Matthew Kruc.
General Info
Agency
NAICS
Place of Performance
UNIT 100173 BOX 1, FPO, AP, 96665, USSet-Aside
Documents
(0)AI Contract Breakdown
Uniform Contract FormatNo contract breakdown available.
Cannot generate Contract Breakdown because no documents were found from this contract's source.
Timeline
Response Deadline
Organization & Contact Information
Full Description
RUBBER SHEET, SOLID
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SYNTHETIC RUBBER
SMOOTH BOTH SIDES
36.000 INCHES SQUARE, 0.063 INCH THICK 45.0 MINIMUM SHORE DUROMETER A
AND 55.0 MAXIMUM SHORE DUROMETER
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
TYPE I ( 12 MONTH ) SHELF LIFE ITEM: MATERIAL FURNISHED UNDER THIS
CONTRACT/ORDER SHALL HAVE AT LEAST 85% OF THE SHELF LIFE REMAINING AT
TIME OF DELIVERY. SHELF LIFE MARKINGS (CURE AND EXPIRATION DATES) SHALL
BE IN ACCORDANCE WITH MIL-STD-129, LATEST REVISION, AND SHALL BE SHOWN
IN CALENDAR QUARTER AND YEAR.
NO ASBESTOS AS DEFINED IN FED-STD-313 IS
PERMITTED IN THIS ITEM
SPE8E9-26-T-3270
SECTION B
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
ITEM SHALL BE MARKED EVERY THREE (3) FEET WITH SPECIFICATION NUMBER AND
REVISION LETTER, TYPE AND CLASS. ALSO, QUARTER AND YEAR OF CURE OR
MANUFACTURE OF THE RUBBER COMPONENT IF REQUIRED. PERFORMANCE AND
LEGIBILITY SHALL BE IN ACCORDANCE WITH (I/A/W) PARAGRAPH 4.1 OF
MIL-STD-190. COLORS AND ENVIRONMENTAL RESISTANCE SHALL BE I/A/W TABLE I
OF MIL-STD-190. THIS REQUIREMENT IS IN ADDITION TO ANY MARKING
REQUIREMENTS CITED IN THIS CONTRACT. CONTRACTOR MUST CERTIFY THEIR
UNDERSTANDING OF BARE ITEM MARKINGS PRIOR TO AWARD.
THIS NSN IS PROCURED AS FULLY COMPETITIVE IN
ACCORDANCE WITH A MILITARY / FEDERAL
SPECIFICATION/STANDARD. SEE NSN/Part Number: 9320-00-641-3051 Quantity: 1 EA Purchase Request: 7017659220QTY: 1 Delivery: 20 days ADO
Similar Contracts
Same NAICS industry code
More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I
Same awarding agency