Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RUBBER STRIP

Active
SPE7L3-26-T-273UFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7L3-26-T-273U is a request for quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of one roll of rubber strip (NSN 5330-01-651-7290), where one roll is defined as 50 feet. The requirement is for the USS MUSTIN DDG 89, located at FPO AP 96672, with a delivery timeframe of 20 days after receipt of order. Quotes must be submitted via the DIBBS system by October 5, 2026. The procurement is conducted under the First Destination Transportation program with FOB Origin terms. The contractor must ensure the rubber strip is free of asbestos and adheres to strict packaging and marking standards. Specifically, the item must be sealed in a medium duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, and marked according to MIL-STD-129 and MIL-STD-130N. Technical and quality requirements are governed by the DLA Master List, specifically RP001 and RA001. Invoicing and receiving reports must be processed through the Wide Area WorkFlow system. The contract incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program, safeguarding of covered defense information, and hazardous material labeling standards.

General Info

DoD request for one 50ft rubber strip for USS MUSTIN by October 5, 2026.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

UNIT 100198 BOX 1, FPO, AP, 96672, USA

Set-Aside

NONE

Documents

(1)

SPE7L3-26-T-273U Request for Quotations

PDF•19 pages•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUSA
Contacts
Susan Diamond
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RUBBER STRIP
RUBBER STRIP
UNIT OF ISSUE IS 1 RO = 50 FT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
"ITEMS SUPPLIED MUST BE FREE OF ASBESTOS.
LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS
ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE
ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE
WITH CLAUSE L30 AND PROVISION 4 CONDITIONS
FOR NSN/Part Number: 5330-01-651-7290 Quantity: 1 RO Purchase Request: 7018451837QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
53--GASKET
Solicitation # SPE7L4-26-U-1286
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
53--PACKING ASSEMBLY
Solicitation # SPE7L1-26-U-0783
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
Preformed Packing O-Rings (NSN 5331011261236)This subcontract involves the manufacture or sourcing of 20 preformed packing O-rings identified by NSN 5331011261236 for prime contractors supporting Land Supply Chain projects for the Naval Undersea Warfare Center. The items must be produced using domestic materials in accordance with DLA portal technical data and delivered to Keyport, Washington. Compliance requirements include obtaining CMMC Level 2 certification and adhering to the 29 CFR 1910.1200 Hazard Communication Standard. The opportunity was posted on September 22, 2026, with a response deadline of October 5, 2026, under NAICS code 339991.
LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
Supply of Preformed Packing (NSN 5330012973586)This subcontract involves the manufacture and supply of eight units of preformed packing material, identified by NSN 5330012973586, for prime contractors supporting Department of Defense DLA supply contracts. The supplier must ensure all materials comply with the DLA Master List of Technical and Quality Requirements and coordinate delivery via FOB Origin under the First Destination Transportation program. The contract is managed by the ASC Supplier Oper OEM Division and specifies the place of performance at Hill AFB in Utah. Under NAICS code 339991, the procurement process includes a response deadline of September 30, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
Supply of Plain Seals (NSN: 5330010577498)This subcontract, issued by the Department of Defense Strategic Acquisition Program Directorate, requires the manufacture or sourcing of 339 plain seals identified by NSN 5330010577498. The selected provider must ensure all materials meet the technical specifications associated with the NSN and adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and shipment. The opportunity is designated as a total small business set-aside under NAICS code 339991. Interested parties must submit their responses by October 7, 2026, to support prime contractors delivering these components for DLA supply contracts.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 22 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7LX-26-U-006F
This solicitation, issued by the Department of Defense Strategic Acquisition Program Directorate, is for the procurement of 105 units of preformed packing under National Stock Number 5330-01-210-2928. The contract requires delivery within 97 days after the order is placed. The items are classified as commercial products and must be completely free of asbestos, with any alternative materials requiring specific approval. Compliance requirements include adherence to CMMC Level 2 certification for third-party assessment and strict adherence to DLA packaging and identification marking standards, specifically MIL-STD-130N. Because the items are susceptible to ultraviolet ray deterioration, they must be sealed in medium duty, waterproof, greaseproof, and opaque bags per MIL-DTL-117 specifications. These requirements apply across all delivery methods, including direct vendor delivery and foreign military sales.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 22 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
PACKING ASSEMBLY
Solicitation # SPE7L3-26-T-272C
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of two packing assemblies under part number 10759-0001 from Garlock Inc. and part number 77696-16X7PC29 from General Dynamics Corp. The contract requires delivery within five days after receipt of order and specifies that the items must be free of asbestos and mercury, with limited exceptions for functional mercury as defined by NAVSEA standards. The procurement is governed by DLA packaging requirements and technical standards found in the DLA Master List. Notably, these items have been manually excluded from the First Destination Packaging Program and are not eligible for standard commercial packaging. The place of performance is located in Portsmouth, and the solicitation is categorized under NAICS code 339991.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, PACKING
Solicitation # SPE4A5-26-T-466D
This contract is for the procurement of 37 units of a packing retainer, identified as a commercial off the shelf critical application item with NSN 5330012973590 and Honeywell part number 2606799-227. The delivery is required within 171 days, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The contract specifies that surplus items are not acceptable and prohibits the use of asbestos. Technical and quality requirements are governed by the DLA Master List, with specific adherence to MIL-STD-1916 or ASQ H1331 for sampling and MIL-STD-129 for marking. Packaging must comply with MIL-DTL-197M and RP001, including the use of waterproof, greaseproof, opaque bags to prevent deterioration from ultraviolet rays. Item Unique Identification is not required for this order, and the material has no shelf life requirement.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SPECI
Solicitation # SPE7L3-26-T-272P
This solicitation, issued by the Department of Defense under the Land Supplier Opns Vehicle Spt agency, is for the procurement of 199 units of nonmetallic special shaped rubber seals, identified by NSN 5330-00-900-8006. The contract requires delivery within 161 days after the order date and is subject to full and open competition. Performance is centered in New Cumberland, Pennsylvania, with the solicitation period running from September 22, 2026, to October 5, 2026. The agreement is governed by strict technical and quality standards, including MIL-STD-130N for identification marking and specific DLA packaging and inspection requirements. Notably, the contract involves export-controlled technical data subject to ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed specialized training to access sensitive information. Additional compliance mandates include configuration change management and the removal of government identification from non-accepted supplies.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
PACKING WITH RETAINER
Solicitation # SPE7L3-26-U-0771
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 22 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-273A
This contract is for the procurement of six gaskets, identified by NSN 5330-01-675-3207 and Boeing part number 214T2432-701. This is a restricted source item designated as a critical application item, requiring engineering source approval by the government design control activity and FAA airworthiness approval. The delivery is set for 219 days after order, with a required delivery date of May 13, 2027, shipped FOB Origin to the DLA Distribution New Cumberland facility. The agreement mandates strict adherence to technical and quality requirements, including supply chain traceability documentation and Item Unique Identification in accordance with MIL-STD-130. Packaging must comply with MIL-STD-2073-1E and RP001, specifically requiring the items to be sealed in medium duty, waterproof, greaseproof, opaque bags to prevent deterioration from ultraviolet rays. Quality assurance will be managed through sampling methods based on MIL-STD-1916 or ASQ H1331, with zero non-conformance required for acceptance.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-238G
This contract is for the procurement of 52 gaskets, identified by NSN 5330011300489 and part number R68474 from Curtiss-Wright Electro-Mechanical. The item is designated as a critical application item and must be free of asbestos and intentionally added mercury. The delivery is set for 83 days after order, with a required delivery date of April 26, 2027, and shipping is FOB Origin to DLA Distribution San Joaquin in Tracy, California. Strict adherence to DLA packaging and marking requirements is mandatory, including compliance with MIL-STD-129 and MIL-STD-2073-1E. Because the item may deteriorate when exposed to ultraviolet rays, it must be sealed in a medium duty, waterproof, greaseproof, opaque bag per MIL-DTL-117. The contract also incorporates specific technical and quality requirements from the DLA Master List and mandates the removal of government identification from any non-accepted supplies.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 332722
New
DIBBS
Gasket Supply (NSN 5330-01-590-7076)This subcontract involves the manufacture or sourcing of one gasket, identified by NSN 5330-01-590-7076, for prime contractors supporting DLA supply contracts. The supplier must ensure the product meets DLA Master List technical requirements and adheres to strict packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129, utilizing medium-duty containers to protect against UV deterioration. The agreement requires a Certificate of Conformance per FAR 52.246-15 and full compliance with DFARS 252.225-7001, with delivery terms set as FOB Origin. Managed under NAICS code 332722 for the Department of Defense, the performance location is based in Macon. The response deadline for this opportunity is October 5, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332721
New
DIBBS
Metal Tube Assembly Supplier (Part No. 4710-01-067-4873)This subcontract involves the precision manufacture and supply of metal tube assemblies, specifically part number 4710-01-067-4873, for prime contractors supporting Department of Defense DLA supply contracts. The supplier must produce the assemblies according to the provided Technical Data Package and reference drawings, with a total delivery requirement of 2,000 units. As part of the quality assurance process, the manufacturer is required to provide two units for First Article Approval and Government Testing. The contract is managed under NAICS code 332721 and is associated with the Land Supplier Opns Vehicle Spt agency, with performance taking place at Robins Air Force Base. Eligible bidders must possess a valid CAGE code and active SAM registration. The response deadline for this opportunity is October 5, 2026.
Precision Turned Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541380
New
DIBBS
Ballistic Production Control Testing ServicesThis subcontract for Ballistic Production Control Testing Services supports prime contractors on DLA supply contracts by performing specialized ballistic and non-ballistic testing. All work must be conducted in strict accordance with ATPD 2352 using approved ballistic testing ranges and firing equipment, with the final deliverables consisting of Ballistic PCT Test Reports and Certifications. To be eligible, providers must maintain the necessary accreditation for ATPD 2352 and ensure full compliance with NIST SP 800-171 for the handling of technical data. The opportunity is a Total Small Business Set-Aside under NAICS code 541380, managed by the Department of Defense Land Supplier Operations Vehicle Support. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by October 6, 2026.
Testing Laboratories and Services

POSTED

about 22 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336992
New
DIBBS
Supply of Transparent Vehicular Window ArmorThis subcontract involves the supply of 78,000 units of transparent vehicular window armor for prime contractors under DLA supply contracts. The manufacturer must produce the armor according to NSN 2541-01-555-4874 technical data, with packaging and marking adhering to MIL-STD-2073-1E and palletization following RP001. Performance will take place in New Cumberland, Pennsylvania, and the contract requires strict adherence to NIST SP 800-171 and CMMC Level 2 compliance standards. Issued by the Department of Defense under the Land Supplier Opns Vehicle Spt agency, this opportunity is a total small business set-aside under NAICS code 336992. The response deadline is October 6, 2026, and the final deliverable consists of 78,000 packaged and palletized units of vehicular window armor.
Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 13 days
View Details
NAICS: 488510
New
DIBBS
MIL-SPEC Packaging and Labeling ServicesThis subcontract for MIL-SPEC Packaging and Labeling Services supports prime contractors delivering for the Department of Defense Land Supplier Opns Vehicle Spt agency. The selected provider will be responsible for performing specialized packaging and marking of items to ensure they are fully prepared for government acceptance. All work must be executed in strict accordance with ASTM D3951 for packaging and MIL-STD-129 for marking and labeling. The contractor is required to utilize specialized labeling equipment capable of producing military-standard marks. This opportunity falls under NAICS code 488510 and was posted on September 22, 2026, with a response deadline of October 5, 2026.
Freight Transportation Arrangement

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326199
New
DIBBS
Cushioning Pad Manufacturer/SupplierThis subcontract involves the manufacture and supply of one cushioning pad, identified by NSN 7018395858, for prime contractors supporting the Department of Defense agency Land Supplier Opns Vehicle Spt. The supplier is responsible for procuring or producing the unit in strict accordance with the current revision of the approved Source Control Drawing to ensure all technical specifications are met. The opportunity falls under NAICS code 326199 and was posted on September 22, 2026, with a response deadline of October 5, 2026. This procurement is managed through the DLA system to support vehicle support operations.
All Other Plastics Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
Forward Cover Gasket Seal SupplyThis subcontract involves the manufacture or sourcing of two industrial gasket seals for forward covers, specifically meeting NSN 5330-01-297-2771 specifications. The supplier will provide these components to prime contractors fulfilling Department of Defense requirements for the Land Supplier Operations Vehicle Support agency. The agreement mandates strict adherence to RP001 DLA Packaging Requirements for Procurement and supports Destination Inspection in accordance with FAR 52.246-2. The opportunity is categorized under NAICS code 332999, with a response deadline set for October 5, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 561910
New
DIBBS
Military-Grade Packaging and Logistics ServicesThis subcontract for Military-Grade Packaging and Logistics Services involves providing specialized packaging and palletization for prime contractors supporting DLA Land and Maritime contracts. The scope of work requires the delivery of 33 units to DLA Distribution DDSP New Cumberland, ensuring all items are processed according to ASTM D3951 and RP001 standards. The contractor must utilize military-specification packing materials and implement labeling and marking systems that comply with MIL-STD-129. This project falls under NAICS code 561910 and is managed by the Department of Defense under the Land Supplier Opns Vehicle Spt agency.
Packaging and Labeling Services

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332312
New
DIBBS
Vehicular Radiator Armor Shield SupplierThis subcontract involves the manufacture and supply of 33 Left Hand Radiator Armor Shields under NSN 2510-01-185-3107 for the Department of Defense, specifically supporting DLA Land and Maritime contracts. The supplier is required to use armor-grade materials and precision fabrication equipment to ensure all components meet the DLA Master List of Technical and Quality Requirements. The project falls under NAICS code 332312 and is managed by the Land Supplier Opns Vehicle Spt agency. Performance of the contract will take place in New Cumberland, Pennsylvania, with a response deadline set for October 5, 2026.
Fabricated Structural Metal Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332710
New
DIBBS
Precision Component Supply for Control AssemblyThis subcontract for the Department of Defense, specifically the Land Supplier Operations Vehicle Support agency, involves the supply of raw materials and precision-machined sub-components for prime contractors fulfilling DLA supply contracts. The selected provider will be responsible for sourcing and machining individual parts according to assembly drawings using precision grinding or CNC machining. All deliverables must be accompanied by mill test reports and material certifications for all plastics and metals used, and the provider must maintain ISO 9001:2015 compliance. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332710, with performance taking place in Texarkana, Texas. Interested parties must respond by September 28, 2026, to provide the necessary machined parts or raw materials to the prime manufacturer.
Machine Shops

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332618
New
DIBBS
Control Assembly, Push-Pull (NSN 2590-01-390-6505)This subcontract involves the manufacture and supply of 86 Control Assembly, Push-Pull units (NSN 2590-01-390-6505) for prime contractors supporting the Department of Defense Land Supplier Operations Vehicle Support. The selected provider must fabricate the assemblies according to specific manufacturing drawings, execute First Article Testing, and provide detailed FAT reports, material certifications, and process operation sheets. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332618, with performance located in Texarkana, Texas. To be eligible, the contractor must maintain ISO 9001:2015 certification. Responses are due by September 28, 2026.
Other Fabricated Wire Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 327213
New
DIBBS
Supplier of Plain Encased Seals (NSN 5330-01-238-0493)This subcontract involves the procurement of 23 units of plain encased seals, identified by NSN 5330-01-238-0493, to support prime contractors delivering DLA Land and Maritime supply contracts. The supplier is responsible for delivering the units to the specified DoDAAC location in Tracy, California, while ensuring all packaging and labeling strictly adhere to MIL-STD-129 and RP001 standards. The contractor must provide Safety Data Sheets in accordance with 29 CFR 1910.1200(g) and maintain full compliance with DFARS 252.223-7008 regarding hexavalent chromium. This requirement is managed under NAICS code 327213 for the Department of Defense, specifically the Land Supplier Operations Vehicle Support agency.
Glass Container Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS