Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

RUBBER STRIP

Active
SPE7L3-26-Q-1243Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 6 units of a rubber strip under solicitation number SPE7L3-26-Q-1243, with a delivery requirement of 150 days after award. The item is classified under Federal Supply Class 5330/5331 and carries the National Stock Number 5330-20-001-9814. All supplies must comply with the DLA Master List of Technical and Quality Requirements, where referenced technical and quality standards are identified by R or I numbers and are incorporated by reference. Packaging must meet MIL-DTL-117, Type II, Class C, Style 1, requiring medium duty, waterproof, greaseproof, and opaque sealing to protect against ultraviolet degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents specified by NAVSEA; portable devices containing mercury must be shockproof and feature a secondary containment boundary as defined by NAVSEA 5100-003D. Additionally, all items must be free of asbestos, with any prior asbestos-containing parts or alternatives subject to approval under Clause L30 and Provision 4 conditions. The solicitation opened on July 31, 2026, and responses are due by August 7, 2026, with the point of contact being Susan Diamond at the Department of Defense’s Land Supplier Operations Vehicle Support office.

General Info

Procure 6 rubber strips under NSN 5330-20-001-9814, deliver in 150 days, meet MIL-DTL-117, no mercury or asbestos.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE7L3-26-Q-1243.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUS
Contacts
Susan Diamond
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RUBBER STRIP,
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
"ITEMS SUPPLIED MUST BE FREE OF ASBESTOS.
LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS
ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE
ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE
WITH CLAUSE L30 AND PROVISION 4 CONDITIONS
FOR NSN/Part Number: 5330-20-001-9814 Quantity: 6 EA Purchase Request: 7017437581QTY: 6 Delivery: 150 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
RETAINER, PACKING
Solicitation # SPE7LX-26-U-8847
The contract involves the procurement of 69 retainer, packing units under National Stock Number 5330-00-508-7949, issued as a solicitation by the Defense Logistics Agency’s Strategic Acquisition Program Directorate under solicitation number SPE7LX-26-U-8847. It is structured as a Unilateral Indefinite Delivery Contract with a one-year period and a maximum value of $350,000, containing a guaranteed minimum quantity of 10 units. The acquisition is a total small business set-aside under NAICS code 339991, with responses due by July 31, 2026, and submissions required exclusively through the DLA Internet Bid Board System. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with export-controlled technical data subject to ITAR or EAR regulations, restricting access to contractors with approved JCP certification, completed training, and DLA authorization. Packaging and marking must strictly comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-117 Type II Class C standards, utilizing opaque, waterproof, greaseproof bags for UV-sensitive items, and applying machine-readable barcoding as mandated. Preservation requires a dry, non-gas environment, and hazardous materials must be labeled per 29 CFR 1910.1200 and DFARS 252.223-7001, with Safety Data Sheets required prior to award. Asbestos is prohibited per FED-STD-313, and ocean shipments must use U.S.-flag vessels unless waived. Cybersecurity compliance is mandated at CMMC Level 2, requiring implementation of NIST SP 800-171 controls and adherence to the DFARS 252.204-7012 clause for safeguarding covered defense information and reporting cyber incidents. Inspection and acceptance occur at destination under MIL-STD-1916 or ASQ H1331 sampling, with zero non-conformances required for critical attributes and acceptable quality levels set at 0.1 for critical, 1.0 for major, and 4.0 for minor defects. Invoicing must be submitted through WAWF, and payment administration will be processed via DoDAAC codes specified in the final award. No formal evaluation factors or
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-U-0634
This contract, issued by the Defense Logistics Agency under solicitation number SPE7L3-26-U-0634, is a small business set-aside for the procurement of a gasket with National Stock Number 5330007954086, intended for delivery under an indefinite-delivery contract structure with a guaranteed minimum of 27 units and a ceiling value of $350,000. The item is required in a quantity of 181 units, with delivery due 116 days after award, delivered FOB origin, and subject to zero variance in quantity. The gasket must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, and the use of asbestos as defined in FED-STD-313 is strictly prohibited. Packaging must adhere to MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, requiring medium-duty, waterproof, greaseproof, and opaque bagging specifically designed to protect against ultraviolet degradation for items under Federal Supply Classes 5330 and 5331. Marking and labeling must follow MIL-STD-129, including proper 2D barcode application for automated processing, with no special marking required beyond standard identification. Preservation is controlled through dry, temperature-regulated storage with no additional preservation or cushioning materials applied. Palletization must conform to DLA’s RP001 packaging requirements, and all hazardous materials must be identified and labeled in compliance with 29 CFR 1910.1200 and MIL-STD-129, with applicable hazard warning data submitted for approval if not governed by other federal statutes. Inspection and acceptance occur at the destination, with the government retaining authority to reject noncompliant items. Contract administration is governed by FAR and DFARS clauses mandating compliance with small business representations, employment eligibility verification, trafficking in persons prevention, sustainable product requirements, cyber security standards including NIST SP 800-171 and safeguarding covered defense information, and electronic invoicing through WAWF. Payment and accounting information will be finalized upon award, and all proposals must be submitted electronically via the DLA-BSM Internet Bid Board System by the July 31, 2026 deadline.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
SEAL KIT
Solicitation # SPE7L3-26-Q-1249
The contract is for a Seal Kit identified by NSN 5330-01-178-6210 and part number SPE7L3-26-Q-1249, with a fixed quantity of 124 kits delivered under a firm fixed price arrangement and no variance allowed in quantity. Delivery is required within 90 days after award, with inspection and acceptance occurring at the destination point under FOB origin terms. Packaging must comply with MIL-STD-2073-1E Appendix D for kits and MIL-STD-129 for marking, with no special marking required; preservation and packaging methods must align with DLA’s procurement requirements. The item is designated a critical application and is subject to strict quality standards referenced in the DLA Master List of Technical and Quality Requirements, including sampling protocols per MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise specified. Mercury and mercury-containing compounds are prohibited except in specific exempted applications such as certain batteries, instruments, or weapon systems, and portable devices containing mercury must have shockproof housing and a secondary containment barrier in accordance with NAVSEA 5100-003D. Asbestos is strictly forbidden. The item does not require Unique Identification under DFARS 252.211-7003. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation logistics follow specified DLA procedural notes. The contract was solicited July 31, 2026, with responses due by August 7, 2026, under NAICS code 339991, issued by the Department of Defense for Land Supplier Operations Vehicle Support.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L3-26-T-108R
The contract is for the procurement of 243 units of PACKING, PREFORMED with NSN 5330-00-510-8549 under solicitation SPE7L3-26-T-108R, issued by the Department of Defense through Land Supplier Ops Vehicle Spt. The item is classified as a commercial item and must comply with DLA packaging requirements, including technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. The use of asbestos as defined in FED-STD-313 is strictly prohibited. Delivery is required within 168 days after award, with performance occurring at Tinkering Air Force Base, Oklahoma. The solicitation was posted on July 9, 2026, with responses due by July 20, 2026. For simplified acquisitions, the applicable revision of the DLA Master List is determined by the solicitation issue date or award date. The point of contact for inquiries is Susan Diamond, reachable via email or phone, and all documentation must be submitted through the DIBBS platform.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
PACKING ASSEMBLY
Solicitation # SPE7L1-26-U-0476
This contract is a small business set-aside solicitation under the Defense Logistics Agency, issued as an indefinite-delivery contract with a maximum value of $350,000 and an estimated quantity of 93 units of a packing assembly identified by NSN 5330-01-270-1629. The solicitation, numbered SPE7L1-26-U-0476, was posted on July 16, 2026, with a response deadline of July 31, 2026, and is governed by the Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement, including specific clauses related to small business representation, equal opportunity, employment eligibility, combating human trafficking, sustainable products, hazardous material handling, and cybersecurity compliance under NIST SP 800-171. All deliverables must comply with stringent military packaging standards, primarily MIL-STD-2073-1E and MIL-STD-129, requiring specific materials such as grease-proof bags, jute cushioning, and sealed boxes, with UV-protected sealing for certain NSNs. Packaging must adhere to DLA’s RP001 guidelines and include proper labeling, barcoding with data matrix codes, and hazard communication in accordance with 29 CFR 1910.1200 and DFARS 252.223-7001. Items must be shipped FOB origin, with transportation to a U.S. location included in pricing for international vendors, and delivery timelines are governed by a 68-day ADO window upon order issuance. Inspection and acceptance occur at the destination by the government under FAR 52.246-1, and all invoicing must be processed electronically through WAWF. The contract requires full compliance with the DLA Master List of Technical and Quality Requirements, referencing “R” and “I” numbers, and mandates accurate representations of small business status and Unique Entity ID in SAM. Cybersecurity protections for covered defense information, restrictions on prohibited telecommunications equipment, and ethical constraints on former DoD officials are among the special requirements incorporated. No detailed evaluation factors or pricing details are provided in the solicitation, indicating the award will likely be based on the Lowest Price Technically Acceptable method, with technical compliance serving as the threshold for award.
LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
PARTS KIT, SEAL REPL
Solicitation # SPE7L3-26-Q-1237
This contract specifies the procurement of a Parts Kit, Seal Replacement with the National Stock Number 5330-01-719-1047 and a quantity of 2 kit units, to be delivered within 230 days after the award date. The item is classified as a critical application item and must comply with strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. All packaging and preservation must adhere to MIL-STD-2073-1E, Appendix D for kits, and the end item must be sealed in a medium-duty, waterproof, greaseproof, opaque bag meeting MIL-DTL-117, Type II, Class C, Style 1, due to the sensitivity of the NSN to ultraviolet exposure. Packaging, marking, and shipping must follow MIL-STD-129 and DLA Packaging Requirements, including palletization standards, and include special markings as designated. The item is subject to delivery to the DLA Distribution facility in New Cumberland, Pennsylvania, under direct vendor delivery, foreign military sales, or stock shipment conditions. The contract prohibits the use or incorporation of Class I ozone-depleting chemicals and mandates that any substitute chemicals require prior approval unless explicitly authorized by the specifications. Mercury or mercury-containing compounds are strictly banned from direct contact with supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents authorized by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment boundary in accordance with NAVSEA 5100-003D. The supplier, Defense Maritime Solutions, Inc., with part number H73918-01/OK, must ensure all items are marked per MIL-STD-130N and that preserved materials meet the specified preservation methods. No quantity variance is permitted—delivery must be exactly two kit units. Contract data indicates it was issued under solicitation SPE7L3-26-Q-1237, with a response deadline in August 2026 and a material need date of February 5, 2027. All handling and transportation must comply with DLA procedural notes C19 and C20, and the point of contact for inquiries is Michael O'Connor at the Department of Defense.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 13 hours ago

DEADLINE

in 9 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-855R
The contract pertains to the procurement of 12 gaskets with NSN 5330-01-490-4386 under solicitation SPE7L1-26-T-855R, with a response deadline of July 31, 2026, and a required delivery within five days after award. The items must be free of asbestos, and any alternative materials must comply with Clause L30 and Provision 4 conditions. Packaging requirements mandate use of a medium-duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, due to the sensitivity of the Federal Supply Classifications 5330/5331 to ultraviolet radiation degradation. This packaging standard applies to direct vendor delivery, foreign military sales, and stock shipments. The gaskets must be marked in accordance with MIL-STD-130N for identification of U.S. military property, and government identification must be removed from non-accepted supplies. Covered defense information provisions may apply, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. The contracting officer is Kristina Derry, and the NAICS code for this procurement is 339991 under the Department of Defense's Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
SEAL RING, METAL
Solicitation # SPE7L3-26-Q-1245
The contract is for 127 metal seal rings with NSN 5330-01-015-2382 under solicitation SPE7L3-26-Q-1245, issued by the Department of Defense through the Land Supplier Operations Vehicle Support office. All items must be free of asbestos, and any alternative materials or substitutions require explicit approval under Clause L30 and Provision 4 conditions. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA packaging standards, and any non-accepted supplies must have all government identification removed as per RQ011. The item must be marked in accordance with MIL-STD-130N dated 16 November 2012. Delivery is required within 90 days after delivery order, and the place of performance is New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation opened on July 31, 2026, and responses are due by August 7, 2026, with primary point of contact Susan Diamond at dla.flbb1prs@dla.mil or 614-692-5625.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339991
New
DIBBS
PACKING WITH RETAINER
Solicitation # SPE7L3-26-Q-1244
The contract requires the supply of 1,284 units of a packing with retainer item under solicitation SPE7L3-26-Q-1244, with a delivery deadline of 150 days after order placement. All items must comply with stringent packaging standards, including enclosure in a medium-duty, waterproof, greaseproof, and opaque bag per MIL-DTL-117, Type II, Class C, Style 1, to protect against ultraviolet degradation of Federal Supply Classifications 5330/5331 NSNs and LSNs. This packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. The product must be free of asbestos, and any previously approved asbestos-containing components are no longer acceptable without formal approval under Clause L30 and Provision 4 conditions. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specified chemical reagents approved by NAVSEA; portable devices containing mercury must include shockproof construction and a second layer of containment as specified in NAVSEA 5100-003D. The item must be marked in accordance with MIL-STD-130N for U.S. military property identification. The contract incorporates cybersecurity requirements under CMMC Level 2 Self-Assessment and references technical and quality standards from the DLA Master List, with the applicable revision based on the solicitation issue date or award date. Performance is required at Robins AFB, Georgia, and inquiries should be directed to the primary point of contact, Susan Diamond, at DLA.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7LX-26-U-8846
This contract is for the procurement of 72 O-Rings with NSN 5331-00-930-3041 under a Small Business Set-Aside solicitation, issued by the Defense Logistics Agency’s Strategic Acquisition Program Directorate. The solicitation, numbered SPE7LX-26-U-8846, was posted on July 16, 2026, with responses due by July 31, 2026, and is structured as an Indefinite Delivery Contract valid for one year with a maximum value of $350,000 and a guaranteed minimum order of 10 units. The O-Rings must conform to SAE AS3582 Revision D dated September 1, 1996, and SAE AMS3304J Revision J dated April 1, 2019, with all items manufactured after the solicitation date required to meet the current revision of these standards. Technical and quality requirements referenced under RA001 are governed by the DLA Master List of Technical and Quality Requirements, and supply chain traceability documentation must be retained per DLA Procurement Note C03. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, including special labeling such as “Do not bend” and sealing in a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117 Type II, Class C, Style 1 to protect against UV degradation. The contractor must comply with strict material prohibitions: no ozone-depleting chemicals, no asbestos, and no hexavalent chromium; substitutes require formal approval. Sampling for inspection follows MIL-STD-1916 or ASQ H1331 Table 1, with acceptance requiring zero non-conformances unless otherwise specified, and attributes are evaluated at critical, major, or minor levels based on AQL standards. Delivery is FOB origin within the continental United States with a 78-day ADO schedule, and payment must be processed electronically via Wide Area Workflow (WAWF) using DFARS-mandated procedures. The contractor must validate all representations in the System for Award Management, affirm compliance with cybersecurity standards including NIST SP 800-171 and DFARS 252.204-7012, and ensure no covered telecommunications equipment from prohibited Chinese entities is
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-Q-1242
The contract is for the procurement of 509 units of a gasket identified by NSN 5330-00-854-9306 under solicitation SPE7L3-26-Q-1242, with a response deadline of August 7, 2026, and a required delivery within 90 days of award. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which incorporates referenced technical and quality standards marked with R or I numbers, and the applicable revision is determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. The gasket must be free of asbestos, and any alternative materials must be formally approved under Clause L30 and Provision 4 conditions. The use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification requirements, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Full and open competition is applicable, and performance will be delivered to Cherry Point, North Carolina, 28533-5040. The contracting activity is under the Department of Defense, specifically the Land Supplier Operations Vehicle Support, with Susan Diamond listed as the primary point of contact.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7M2-26-T-5487
A gasket with NSN 5330-99-570-6558 is being solicited under contract number SPE7M2-26-T-5487 by the Defense Logistics Agency, a component of the Department of Defense. The request specifies a quantity of two units and was posted on July 7, 2026, with a response deadline of July 20, 2026. The solicitation is open to federal contractors and does not designate a specific set-aside or NAICS code, indicating it is broadly available. The place of performance and point of contact details are not provided, and the procurement is managed through the DIBBS system with the official link for submission and information access.
NUCLEAR REACTOR PROGRAM

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7L3-26-Q-1241
The contract pertains to the supply of 93 gaskets identified by NSN 5330-01-271-4308, with a delivery requirement of 150 days after order placement. All items must be free of asbestos, and any substitutions for listed code or part numbers containing asbestos require formal approval under Clause L30 and Provision 4 conditions. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements accessible via the provided web portal, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA packaging requirements, and all non-accepted supplies must have government identification removed prior to delivery. The solicitation number is SPE7L3-26-Q-1241, issued on July 31, 2026, with responses due by August 7, 2026. Performance is designated for Tracy, CA, 95304-5000, under NAICS code 336411, and the contracting activity falls under the Department of Defense’s Land Supplier Operations Vehicle Support. Primary point of contact is Susan Diamond at dla.flbb1prs@dla.mil or 614-692-5625.
Aircraft Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333612
New
DIBBS
LEADSCREW, SCREW JAC
Solicitation # SPE7L3-26-T-123T
This contract pertains to the procurement of a lead screw for a screw jack, identified by part number D2758-01-00 and NSN 3010-01-732-3696, with a quantity of four units required. The item is classified as a critical application item, and while unit identification is not mandated, all delivery and packaging must adhere strictly to DLA and MIL-STD guidelines. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. Palletization follows DLA packaging requirements, and delivery is FOB origin with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and the delivery window is set for 208 days from the contract award, with a firm need ship date of February 25, 2027. The item must not contain any Class I ozone-depleting chemicals, a prohibition that overrides any conflicting specification language, and substitutes require prior approval unless explicitly permitted. The contract is issued under solicitation number SPE7L3-26-T-123T as a total small business set-aside under NAICS code 333612, awarded by the Department of Defense’s Land Supplier Operations Vehicle Support branch. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation or award date depending on acquisition size. The destination for delivery is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation logistics are governed by DLAD procedural notes C19 and C20. The point of contact for the contract is Benita Umoren, reachable via phone and email, and full details including unit of issue conversion are available through official DoD resources. All terms are binding under federal procurement guidelines, with strict adherence to compliance, environmental restrictions, and logistical directives.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336330
New
DIBBS
LINING MATERIAL, FRI
Solicitation # SPE7L3-26-T-082V
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333613
New
DIBBS
CAM, CONTROL
Solicitation # SPE7L3-26-T-124D
This contract, issued under solicitation SPE7L3-26-T-124D by the Department of Defense through the Land Supplier Operations Vehicle Support office, pertains to the procurement of two critical automation control items from Emerson Automation Solutions with part numbers 07209001128 and SW142-16, totaling six units. The items are designated as critical application components and must comply with strict technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, referenced via R and I numbers. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and feature a secondary containment barrier in accordance with NAVSEA 5100-003D. Delivery is required FOB origin within 157 days, with zero variance allowed in quantity, and inspection and acceptance will occur at the destination. Packaging must adhere to MIL-STD-2073-1E with specified methods for preservation, wrapping, and unit containment, while marking must conform to MIL-STD-129 with no special marking required. The deliverables must be palletized per DLA’s packaging guidelines and shipped to the designated receiving warehouse in Tracy, California. The original required delivery date is May 19, 2027, with a need ship date of January 5, 2027. The contract specifies the unit of issue as each and the total contract value is $36.00, with terms aligned with DoD and DLA procedures for transportation and freight. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336992
New
DIBBS
CAP, FILLER OPENING
Solicitation # SPE7L3-26-T-124C
The item specified is a CAP, FILLER OPENING, to be manufactured using a metal casting process, requiring specialized tooling for production. A total of 63 units are requested under solicitation SPE7L3-26-T-124C, with delivery due within 157 days from award. The procurement is governed by the Defense Logistics Agency and falls under NAICS code 336992, targeting federal suppliers with performance occurring in New Cumberland, Pennsylvania. Compliance with stringent quality and technical requirements is mandatory, including adherence to the DLA Master List of Technical and Quality Requirements, and specific documentation controls such as Configuration Change Management via Engineering Change Proposals and Inspection and Acceptance at Origin. The item contains components governed by Qualified Products Lists or Qualified Manufacturers Lists, necessitating strict supplier qualification. Export control regulations apply to associated technical data, subject to either ITAR or EAR, prohibiting unauthorized transfer to foreign persons or entities, including domestic subsidiaries of U.S. firms. Access to this controlled data is restricted to contractors holding U.S./Canada Joint Certification Program approval, having completed mandatory DOD export control training, and obtained formal authorization from DLA. Packaging must meet DLA procurement standards, and non-accepted supplies must have government identification removed per specified directives. Cybersecurity compliance is required at CMMC Level 2 through a certified third-party assessment organization. All responses to this solicitation must be submitted by July 31, 2026, with primary point of contact Matthew Curry at the Defense Logistics Agency.
Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336211
New
DIBBS
KINGPIN, FIFTH WHEEL
Solicitation # SPE7L3-26-T-123Z
This contract pertains to the procurement of KINGPIN, FIFTH WHEEL items under solicitation SPE7L3-26-T-123Z, with a total quantity of six units to be delivered FOB origin within 157 days from the contract award, with no tolerance for variance in quantity. The specification mandates strict adherence to the DLA Master List of Technical and Quality Requirements, superseding any conflicting standards, including ASTM D3951 for packaging, which itself must be followed only in the absence of higher precedence DLA requirements. Packaging and labeling must comply fully with MIL-STD-129, and palletization must meet RP001 guidelines. Inspection and acceptance occur at the point of origin, with sampling required to follow MIL-STD-1916 or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and all samples must result in zero non-conformances unless otherwise contracted. The product is classified as a critical application item and must conform to CID A-A-52479 Revision D dated 10/21/1993 in lieu of MS53037. The use of Class I ozone-depleting chemicals is strictly prohibited, and any proposed substitutes require prior approval. Full and open competition applies under a total small business set-aside, and the NSN 2510-01-109-7054 must be delivered to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with all transportation governed by DLAD procedural notes C19 and C20. The original required delivery date is March 20, 2027, with a need ship date of January 5, 2027, and each unit is priced at $6.00, totaling $36.00.
Motor Vehicle Body Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details