Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SACK, SHIPPING

Active
SPE8ED-26-Q-0672Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of seven shipping sacks, identified by NSN 8105-66-163-8445, under a firm fixed price agreement. Delivery is required within 90 days after order, with inspection and acceptance occurring at the destination. Shipping must be handled via the fastest traceable means to the specified address at Fort Bragg, North Carolina, and must not be sent via parcel post. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan unless otherwise specified. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements. The contract incorporates several technical and quality requirements from the DLA Master List, including provisions for the removal of government identification from non-accepted supplies and the handling of covered defense information.

General Info

Firm fixed price contract for seven shipping sacks delivered to Fort Bragg within 90 days.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERSView Agency

NAICS

N/A

Place of Performance

5234 EAGLE TALON DR BLDG X3063, FORT BRAGG, NC, 28310, USA

Set-Aside

NONE

Documents

(1)

SPE8ED-26-Q-0672 Request for Quotations

PDF•6 pages•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS
View Agency Profile
Office AddressUSA
Contacts
ANGELA ROMANIELLO
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SACK,SHIPPING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SEA TO SUMMIT PTY LTD Z0BM7 P/N A4006-36
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0001 8105-66-163-8445 7.000 EA $ _______________ $ _______________
SACK,SHIPPING
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 90 DAYS ADO
SPE8ED-26-Q-0672
SECTION B
SUPPLY/SERVICE: 8105-66-163-8445 CONT'D
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W91KBP
0003 SF BN 01 CO A SUSTAINMEN
3D SFG SSA AWCF SSF
5234 EAGLE TALON DR BLDG X3063
FORT BRAGG NC 28310
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W91KBP
0003 SF BN 01 CO A SUSTAINMEN
3D SFG SSA AWCF SSF
5234 EAGLE TALON DR BLDG X3063
FORT BRAGG NC 28310
US
MARKFOR
W91KBP
0003 SF BN 01 CO A SUSTAINMEN
3D SFG SSA AWCF SSF
5234 EAGLE TALON DR BLDG X3063
FORT BRAGG NC 28310
US
M/F: (TCN) W91KBP62300017
RDD: 231
PROJ: TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: V ADV: FC: Z9
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7018016648 0001 N/A N/A N/A 08/24/2026

SPE8ED-26-Q-0672 NSN/Part Number: 8105-66-163-8445 Quantity: 7 EA Purchase Request: 7018016648QTY: 7 Delivery: 90 days ADO

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

Same awarding agency

NAICS: 326299
New
DIBBS
GROUND CLOTH
Solicitation # SPE8ED-26-T-1300
Solicitation SPE8ED-26-T-1300 is a Request for Quotations issued by DLA Troop Support Construction and Equipment Containers for the procurement of 9 units of Ground Cloth, identified by NSN 5430-01-683-5105. The requirement is categorized under NAICS code 326299. Delivery is set as FOB Origin with an original required delivery date of November 1, 2026, and a need ship date of February 15, 2027. Both inspection and acceptance will occur at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking and RP001 for palletization. Non-hazardous materials must follow ASTM D3951, while hazardous materials require packaging per TQ requirement IP025 and labeling according to the Hazard Communication Standard. Quality assurance will be governed by MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Quotes must be submitted via the DIBBS portal.
All Other Rubber Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 314910
New
DIBBS
BAG, CABLE STORAGE
Solicitation # SPE8ED-26-Q-0671
This contract, identified as SPE8ED-26-Q-0671, is a firm fixed price solicitation for the procurement of one cable storage bag, part number 999-81125 from Fieldtex Products Inc. The item is identified by NSN 8105-01-644-6232 and is destined for the USS Delaware (SSN 791). Delivery is required within 90 days after receipt of the order, with a material need date of February 20, 2026. The agreement incorporates specific DLA technical and quality requirements, including the removal of government identification from non-accepted supplies and strict adherence to MIL-STD-1916 or ASQ H1331 for sampling methods. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Shipping is to be handled via the fastest traceable means to the specified FPO address, with inspection and acceptance occurring at the destination.
Textile Bag and Canvas Mills

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
DIBBS
BOX, SHIPPING AND STORA
Solicitation # SPE8ED-26-T-1331
This contract, identified as SPE8ED-26-T-1331, is a solicitation from the Department of Defense for the procurement of two units of shipping and storage boxes under NSN 8145015996075. The requirement specifies part number R0122107 and mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under MIL-STD-2073-1E and marking standards per MIL-STD-129. Delivery is required within 20 days, with a required delivery date of August 27, 2026. The terms specify FOB Origin with inspection and acceptance occurring at the destination. Shipments are directed to USMC/US Government locations at Robertson Barracks in Palmerston, Australia, under the SOFA Tariff Act. The contract includes specific quality requirements for the removal of government identification from non-accepted supplies and documentation for source approval requests.
Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
WASHER-EXTRACTOR, LAUND
Solicitation # SPE8ED-26-T-1330
This contract is for the procurement of two commercial laundry washer-extractors, model EW60VNSWE-24B, manufactured by Edro Corp. These units are specifically designated for naval shipboard use and feature right-side controls with a maximum load rating of 60 pounds. The agreement requires the inclusion of manuals, with one additional copy to be sent to DLA Troop Support in Philadelphia. The order is governed by specific DLA technical and quality requirements, including packaging standards and the removal of government identification from non-accepted supplies. Delivery is set for DLA Distribution Yokosuka in Japan, with a required delivery date of September 2, 2026, and a delivery window of 20 days. Inspection and acceptance will occur at the destination, and all shipping must comply with MIL-STD-129 marking and MIL-STD-2073-1E packaging standards.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332439
New
DIBBS
SUPPORT, SHIPPING AN
Solicitation # SPE8ED-26-T-1328
This contract, identified as SPE8ED-26-T-1328, is a solicitation for the procurement of four units of a support, shipping, and storage and transport frame. The item is identified as a commercial product with part number 160634B from Sharkcage Inc. and national stock number 8145015120901. The required delivery date is August 27, 2026, with a delivery window of 20 days after order. The agreement specifies that delivery is FOB Origin, with inspection and acceptance occurring at the destination in Fallon, Nevada. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements for procurement. The contract incorporates specific technical and quality requirements from the DLA Master List, including guidelines for the removal of government identification from non-accepted supplies and the handling of covered defense information.
Other Metal Container Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332439
New
DIBBS
SUPPORT, SHIPPING AN
Solicitation # SPE8ED-26-T-1293
Contract SPE8ED-26-T-1293 is a solicitation issued by the Department of Defense DLA Troop Support Construction and Equipment for the procurement of 14 units of modular storage covers, identified by NSN 8145-01-512-1017. The requirement specifies part numbers 190122890 from Sharkcage Inc and 66372 from Berg Manufacturing Inc. This is a total small business set-aside under NAICS code 332439, with a required delivery date of August 17, 2026, and a delivery window of 20 days after order. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 and ASTM D3951, with marking and labeling following MIL-STD-129. Shipping must be handled via traceable means to the designated freight address at JB MDL NJ 08640-5102. Key compliance terms include the removal of government identification from non-accepted supplies and the application of the DLA Master List of Technical and Quality Requirements. Inspection and acceptance will occur at the destination.
Other Metal Container Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 326299
New
DIBBS
TANK SECTION, FLUID
Solicitation # SPE8ED-26-T-1285
Solicitation SPE8ED-26-T-1285 is a total small business set-aside issued by DLA Troop Support Construction and Equipment Containers for the procurement of one fluid tank section, identified by NSN 5430-01-566-9172. The requirement specifies a delivery timeframe of five days after award, with an original required delivery date of August 18, 2026. Shipping is designated as FOB Origin, with the freight shipping and bulk break point located in Rainelle, West Virginia. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129 for marking and labeling. Non-hazardous materials must follow ASTM D3951, while hazardous materials require packaging per TQ requirement IP025 and labeling according to the Hazard Communication Standard. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with zero non-conformances required for acceptance under MIL-STD-105/ASQ Z1.4. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. The government will not evaluate offers utilizing additive manufacturing unless specifically authorized. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.
All Other Rubber Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333248
New
DIBBS
SEWING MACHINE, INDUSTR
Solicitation # SPE8ED-26-T-1329
This contract is for the procurement of one industrial single needle long arm sewing machine, specifically model 440R from Consolidated Sewing Machine Corp. The equipment must feature a 30 inch long arm, a maximum sewing speed of 1,500 stitches per minute, a walking foot with compound and reverse feed, and a built-in bobbin winder. Additional technical requirements include a safety clutch, centralized arm lubrication, and a push button stitch regulator. The order is designated for delivery to the USS John Finn DDG 113. It mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and ASTM-D-3951, while prohibiting the intentional addition of mercury. Delivery is required within 20 days after order, with the original required delivery date set for September 2, 2026. Inspection and acceptance will take place at the destination.
All Other Industrial Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326111
New
DIBBS
SACK, SHIPPING
Solicitation # SPE8ED-26-Q-0670
Solicitation SPE8ED-26-Q-0670 is a request for quotations issued by the Department of Defense DLA Troop Support for the procurement of 18 shipping sacks, identified by NSN 8105-66-163-8445. This is a firm fixed price contract with a delivery requirement of 90 days after order. The terms specify FOB origin, with both inspection and acceptance occurring at the destination. The items are to be delivered to the 3D SFG SSA AWCF SSF at Fort Bragg, North Carolina, using the fastest traceable shipping means. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan unless otherwise specified. Packaging must comply with ASTM D3951 and RP001 DLA packaging requirements, with marking and labeling following MIL-STD-129. The contract incorporates various DLA master list technical and quality requirements, including the removal of government identification from non-accepted supplies and guidelines for covered defense information.
Plastics Bag and Pouch Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 316210
New
DIBBS
SHIPPING AND STORAG
Solicitation # SPE8ED-26-T-132
This contract, identified as SPE8ED-26-T-1332, is a solicitation from the Department of Defense for the procurement of three collapsible ALFS cases, part number 9456847, under NSN 8145200069370. The items must adhere to specific dimensions of 51 inches in length, 33 inches in height, and 37 inches in width. The agreement incorporates DLA master technical and quality requirements, including RD003 for covered defense information, RP001 for packaging, and RQ011 for the removal of government identification from non-accepted supplies. Delivery is required within 20 days, with an original required delivery date of August 13, 2026. The terms specify FOB Origin for delivery, inspection, and acceptance. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA procurement requirements. The final destination for the freight is the Commanding Officer INS TUNIR in Mumbai, India.
Footwear Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Specialized Freight and Traceable Shipping ServicesThis subcontract for Specialized Freight and Traceable Shipping Services involves the transportation of finished cushioning pads from their origin to the NUWC facility in Keyport, Washington. The shipment must be handled via traceable means and adheres to FOB Origin terms, with specific requirements for inspection at the destination. The opportunity is managed by Construction and Equipment Containers for the Department of Defense under NAICS code 484220. Interested parties must submit their responses by September 10, 2026, for performance at the Keyport site.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 561910
New
DIBBS
MIL-Compliant Packaging and Preservation ServicesThis subcontract for MIL-Compliant Packaging and Preservation Services is issued by Construction & Equipment Containers under the Department of Defense. The contractor is required to provide comprehensive packaging, preservation, labeling, and palletization services in strict accordance with MIL-STD-2073-1E and MIL-STD-129. A specific requirement of the contract is the avoidance of plastics unless they are functionally necessary for the preservation of the items. The work is to be performed in Keyport, Washington, under NAICS code 561910. Interested parties must submit their responses by the deadline of September 10, 2026.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 9 days
View Details