SAFETY BOARD KIT

SAFETY BOARD KIT
SAFETY BOARD KIT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
FULL AND OPEN COMPETITION APPLY
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
SPE7L3-27-T-0358
SECTION B
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment KIT QUALITY PROVISION .
1. THIS REQUIREMENT APPLIES TO MATERIAL SUPPLIED TO THE GOVERNMENT AS A KIT.
2. THE CONTRACTOR SHALL COMPLY WITH ALL APPLICABLE QUALIFIED PRODUCTS LIST (QPL) REQUIREMENTS FOR THE KIT COMPONENTS BEING SUPPLIED.
3. THE CONTRACTOR SHALL INCORPORATE A SYSTEM FOR OBTAINING, HANDLING AND SUPPLYING ORIGINAL EQUIPMENT MANUFACTURER (OEM) CERTIFIED PARTS INTO ALL CONTRACTUAL DOCUMENTS ENTERED INTO WITH ITS VENDORS.
4. THE CONTRACTOR SHALL IMPLEMENT AN INSPECTION SYSTEM, WHICH WILL INCLUDE INSPECTION OF ALL PARTS UPON RECEIPT TO ENSURE CONFORMANCE WITH REQUIREMENTS AND TO ENSURE THAT THEY ARE NOT DAMAGED.
5. THE CONTRACTOR SHALL MAINTAIN A SYSTEM OR PROCESS THAT WILL ENSURE TRACEABILITY OF ALL PARTS, THROUGH AN UNBROKEN SUPPLY CHAIN, TO THE MANUFACTURER.
6. THE CONTRACTOR'S INSPECTION SYSTEM AND PROCEDURE FOR ENSURING PARTS TRACEABILITY SHALL BE AVAILABLE FOR REVIEW BY THE GOVERNMENT AT THE REQUEST OF THE CONTRACTING OFFICER.
7. THE CONTRACTOR SHALL FURNISH ONLY THOSE PARTS THAT ARE KNOWN TO BE ACCEPTABLE TO THE GOVERNMENT, I.E. SOLE SOURCE PARTS, APPROVED SOURCE PARTS, ACCEPTABLE SOURCE PARTS, AS REFLECTED IN THE GOVERNMENT'S CONTRACT TECHNICAL DATA FILE (CTDF).
8. UNLESS OTHERWISE APPROVED IN ADVANCE BY THE CONTRACTING OFFICER, THE CONTRACTOR SHALL SUPPLY ONLY NEW AND UNUSED PARTS THAT ARE NOT GOVERNMENT SURPLUS PARTS.
TDP Rev A Gen 1 IAW BASIC DRAWING NR 19207 57K9296
SPE7L3-27-T-0358
SECTION B
REVISION NR DTD 05/28/2021
PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19207 12630359 REVISION NR DTD 11/30/2018 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19207 12630358 REVISION NR DTD 11/30/2018 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018663008 0001 KT 8.000
NSN/MATERIAL:4910016202614
DELIVERY (IN DAYS):0187
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
"PRESERVATION & PACKAGING SHALL BE I/A/W THE LATEST REVISION OF MILITARY SPECIFICATION MIL-STD-2073-1 APPENDIX D, FOR PACKAGING OF "KITS".
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
SW3227
DLA DISTRIBUTION RED RIVER
SPE7L3-27-T-0358
SECTION B
PR: 7018663008 PRLI: 0001 CONT’D
RECEIVING BLDG 499
10TH STREET AND K AVENUE
TEXARKANA TX 75507-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3227
DLA DISTRIBUTION RED RIVER
RECEIVING BLDG 499
10TH STREET AND K AVENUE
TEXARKANA TX 75507-5000
US
Need Ship Date:04/25/2027 Original Required Delivery Date:10/31/2027
SPE7L3-27-T-0358 NSN/Part Number: 4910-01-620-2614 Quantity: 8 KT Purchase Request: 7018663008QTY: 8 Delivery: 187 days ADO