San Juan Harbor Construction and Maintenance Dredging, 44-Foot and 36-Foot Project, San Juan, Puerto Rico

5/10/23: Revised Bid Abstract posted, see attachments section 5/10/23: Bid Abstract posted, see attachments section ***UPDATE 5 MAY 2023: Issued Environmental permits indicated in amendment 0007 have been publicly posted to the SAJ Environmental Website at the following website: https://www.saj.usace.army.mil/About/Divisions-Offices/Planning/Environmental-Branch/Environmental-Compliance/#Puerto_Rico ***UPDATE AMENDMENT 0007 issued on 28 April 2023, see attachment W912EP23B0008 AMENDMENT 0007 FINAL ***UPDATE: AMENDMENT 0006 issued on 21 April 2023 ***UPDATE: AMENDMENT 0005 issued on 17 April 2023 ***UPDATE: AMENDMENT 0004 issued on 10 April 2023, see attachment W912EP23B0008 AMENDMENT 0004 FINAL 04102023 **UPDATE 7 April 2023: A forthcoming amendment is pending, which will extend the bid due date and bid opening. ***UPDATE: AMENDMENT 0003 issued on 31 March 2023 ***UPDATE: AMENDMENT 0002 issued on 29 March 2023, see attachment W912EP23B0008 AMENDMENT 0002 FINAL 03292023 ***UPDATE 23 MARCH 2023: Site Visit and Pre-Bid Conference information posted, see attachments. ***Amendment 0001 issued on 10 March 2023 *** Work associated with the requirement consists of construction and maintenance dredging in designated areas of deepening and widening of the Federal navigation channel and Puerto Rico Ports Authority (PRPA) berthing areas. The project work includes: Deepening Cut-6 of the entrance channel to a required depth of 47 feet, Deepening the Anegado Channel to a required depth of 45 feet, The Army Terminal Channel, and the Army Terminal Turning Basin to a required depth of 46 feet, Deepening the Federal channels adjacent to the cruise ship terminals, to include the San Antonio Approach Channel, the San Antonio Channel, the Cruise Ship Basin East, and the Cruise Ship Basin West to a required depth of 37 feet. Project work will also include maintenance dredging of areas within the Puerto Nuevo Channel, Puerto Nuevo Turning Basin, Graving Dock Channel and Anchorage Area - E to required depths ranging from 36 feet to 39 feet. The project widening involves constructing 50 feet of new channel on both sides of Army Terminal Channel to increase the total channel width by 100 feet from 350 feet to 450 feet, and eastern and western flares at the intersection of the southern terminus of the Army Terminal Channel and the Army Terminal Turning Basin. All areas of deepening and widening will incorporate +1 foot of allowable overdepth.All maintenance dredging areas will incorporate +2 feet of allowable overdepth. Project work also consists of dredging the PRPA Cruise and Pan American berthing areas and the PRPA berthing areas located adjacent to the Army Terminal Turning Basin. All dredged material will be disposed of in the San Juan Ocean Dredge Material Disposal Site (ODMDS) located approximately 2.3 nautical miles from the northern end of Cut-1. Said work, which will be performed in San Juan, Puerto Rico, and divided into a base and two options, is also inclusive of, but not limited to, environmental species monitoring, turbidity monitoring and vibration monitoring. THE BID OPENING WILL BE HELD VIRTUALLY VIA WEBEX ON 9 MAY 2023 AT 2:00 PM (EDT) Webex Link: https://usace1.webex.com/meet/adeline.f.fuata Call In Info:+1 (555) 000-0000 (US Toll Free), +1 (555) 000-0000 (US Toll) Access Code: 2761 122 9179 The period of performance is 440 calendar days after the notice to proceed is issued. The total completion time includes the following: Base Bid 370 calendar days (including 60 calendar days mob/demob) Option A 20 Calendar days Option B 30 calendar days Option C 10 calendar days Option D 10 Calendar days The NAICS is 237990, size standard of $37 million The estimated magnitude of construction is between $25,000,000 to $100,000,000 THIS IS AN UNRESTRICTED SOLICITATION. ALL RESPONSIBLE CONTRACTORS ARE ENCOURAGED TO PARTICIPATE. Solicitation will be issued in electronic format only and will be posted on the SAM website at www.sam.gov. In order to receive notification of any amendments to this solicitation, interested vendors must REGISTER AS AN INTERESTED VENDOR on the SAM website at www.sam.gov. If you are not registered, the Government is not responsible with providing you with notification of any changes to this solicitation. You must be registered in the System for Award Management (SAM) in order to be eligible to receive an award from this solicitation. For additional information, please call +1 (555) 000-0000 or visit the SAM website at https://www.sam.gov/.