This Sources Sought opportunity from Department Of Defense was posted on May 13, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Sanding & Painting Booth Preventative Maintenance

Closed

FA465925QM013Federal

Submission Closed05/16/2025, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 488190

New

Federal

Repair of Main and Nose Landing Gear Actuating Assemblies

Solicitation # 70Z03827IB0000002

Aviation Logistics Center (ALC)(00038)

POSTED

DEADLINE

Solicitation # SPEFA527T0091

Nc DLA Aviation At Cherry Point

POSTED

DEADLINE

Paint Services in support of the HC-144 Aircraft.

Solicitation # 70Z03827QL0000005

Aviation Logistics Center (ALC)(00038)

POSTED

DEADLINE

Solicitation # SPEFA327Q0009

Fl DLA Aviation - Jacksonville

POSTED

DEADLINE

Solicitation # SPEFA3-27-T-0026

Solicitation SPEFA3-27-T-0026 is a request for quotations for the procurement of 21 units of Washer, 0.070, identified as a critical application item. The hardware must conform to drawing 152B2055 Revision E, part number 152B2055-4, and NSN 5310LN0020789. The contract is managed by the DLA Aviation office in Jacksonville, Florida, with a required delivery date of March 21, 2027, and a delivery window of 144 days after the award. Delivery, inspection, and acceptance are all set to destination, with shipping directed to the DLA Distribution Jacksonville facility. The contractor must adhere to strict quality and packaging standards, including MIL-STD-130N(1) for identification marking and ASTM D3951 for general packaging, though DLA Master List requirements take precedence. Palletization must follow RP001, and labeling must comply with MIL-STD-129. Quality assurance requires a manufacturer's inspection system complying with SAE AS9003 or ISO 9001, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. The procurement incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, cybersecurity safeguarding under DFARS 252.204-7012, and the use of the Wide Area WorkFlow system for electronic invoicing. Quotations must be submitted via the DIBBS portal by October 27, 2026.

DLA FLEET READINESS CENTER SOUTHEAST

POSTED

DEADLINE

Solicitation # SPEFA5-27-T-0080

Solicitation SPEFA5-27-T-0080 is a federal procurement issued by the DLA Aviation at Cherry Point, North Carolina, for the acquisition of nine units of NSN 1560LNC13865, identified as a critical application item for Sikorsky Aircraft Corporation (P/N 65211-13012-101). The contract specifies a delivery timeframe of 63 days after order, with an original required delivery date of February 5, 2027. Delivery, inspection, and acceptance are all set as FOB Destination, with shipping directed to the Fleet Readiness Center DLA in Cherry Point, NC. The contractor must adhere to strict quality and packaging standards, including SAE AS9003 or ISO 9001 for manufacturer inspection systems and MIL-STD-1916 or ASQ H1331 for sampling methods. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129 and RQ017 for bare item marking. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various DFARS and FAR clauses, including those regarding cybersecurity (DFARS 252.204-7012), the Buy American Act, and prohibitions on covered defense telecommunications equipment.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

Solicitation # SPEFA5-27-T-0081

Solicitation SPEFA5-27-T-0081 is a request for quotations issued by the DLA Aviation at Cherry Point, North Carolina, for the procurement of three bracket clips, identified by NSN 1560-LL-NCA-7044 and Sikorsky Aircraft Corporation part number 65251-08109-101. The contract requires delivery to the Fleet Readiness Center DLA in Cherry Point, NC, with an original required delivery date of December 8, 2026, and a delivery lead time of 27 days after receipt of order. The items are subject to destination inspection and acceptance, with a zero-percent quantity variance allowed. Technical compliance requires adherence to the DLA Master List of Technical and Quality Requirements, specifically RP001 for packaging and RQ017 for physical identification and bare item marking. Packaging must follow ASTM D3951 and MIL-STD-129, while sampling must be conducted per MIL-STD-1916 or ASQ H1331. The procurement is governed by NAICS code 488190 and incorporates various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and electronic invoicing via the Wide Area WorkFlow system. There is no shelf life requirement for this material.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

Solicitation # SPEFA3-27-T-0027

Solicitation SPEFA3-27-T-0027 is a request for quotations issued by DLA Aviation in Jacksonville, Florida, for the procurement of 9 units of O-rings, identified by NSN 5331LN0035611. This item is designated as a critical application item with approved sources including The Boeing Company, Trelleborg Sealing Solutions (UK), and BAE Systems (Operations) Limited. The required delivery date is October 19, 2026, with a delivery window of 84 days after order. Shipping is set as FOB Destination, with delivery and inspection points both located at the destination in Jacksonville, Florida. The contract mandates strict quality and packaging standards, requiring compliance with ASTM D3951 and MIL-STD-129 for marking and labeling, while DLA Master List requirements and RP001 for palletization take precedence. Quality assurance involves zero-based sampling plans per MIL-STD-1916 or ASQ H1331, and manufacturers must comply with SAE AS9003 or ISO 9001. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to the Buy American Act and Berry Amendment. Item Unique Identification is not required for this procurement.

DLA FLEET READINESS CENTER SOUTHEAST

POSTED

DEADLINE

Solicitation # SPEFA5-27-T-0086

Solicitation SPEFA5-27-T-0086 is a fixed-price procurement issued by the DLA Aviation at Cherry Point, North Carolina, for the supply of three units of a mount, identified by NSN 1560LLNC17132 and Sikorsky Aircraft Corporation part number 65213-06005-048. This critical application item has an original required delivery date of June 10, 2027, with a delivery lead time of 144 days after receipt of order. The contract specifies that both inspection and acceptance will occur at the destination, with shipping directed to the Fleet Readiness Center DLA in Cherry Point, NC. The contractor must adhere to strict quality and packaging standards, including ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 for palletization. Quality assurance requires compliance with SAE AS9003 or ISO 9001, with sampling conducted per MIL-STD-1916 or ASQ H1331. Administrative requirements include electronic invoicing via the Wide Area Workflow system and compliance with various DFARS and FAR clauses, including the Buy American Act, NIST SP 800-171 assessment requirements, and safeguarding of covered defense information.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

Solicitation # SPEFA5-27-T-0089

Solicitation SPEFA5-27-T-0089 is a federal procurement issued by the Defense Logistics Agency for the acquisition of four units of NSN 1560LN0035305, identified as CAP, with a part number 205-030-144-035 from Bell Textron Inc. The requirement is categorized under NAICS code 488190. Delivery is required within 13 days after order, with an original required delivery date of November 27, 2026. The terms are FOB Destination, with both inspection and acceptance occurring at the destination. Shipping is directed to the Fleet Readiness Center DLA in Cherry Point, North Carolina. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951, MIL-STD-129 for marking, and RP001 for palletization. Quality assurance will be managed via sampling methods such as MIL-STD-1916 or ASQ H1331, with specific AQLs assigned for critical, major, and minor attributes. Compliance requirements include the Buy American Act, NIST SP 800-171 for cybersecurity, and prohibitions on covered defense telecommunications equipment. All quotes must be submitted through the DLA Internet Bid Board System, and payment will be processed via Wide Area Workflow.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

Solicitation # SPEFA1-26-T-0275

Solicitation SPEFA1-26-T-0275 is a request for quotations for the procurement of five counter assemblies, identified by NSN 1680-LL-SNS-A263. This is a critical application item with referenced part numbers 36011 from Carp Industries Corp and Aerosonic LLC. The contract is managed by DLA Aviation at San Diego, with a required delivery timeline of 84 days and a target delivery date of December 9, 2026. Delivery, inspection, and acceptance are all set as FOB Destination, with shipping directed to Naval Base Coronado in San Diego, California. The contractor must adhere to strict quality and technical standards, including SAE AS9003 or ISO 9001 compliance for manufacturer inspection systems. Sampling will be conducted per MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Packaging must follow ASTM D3951 and RP001, while marking and labeling must comply with MIL-STD-129. The solicitation incorporates various FAR and DFARS clauses, including the Buy American Act and NIST SP 800-171 assessment requirements. Invoicing is to be processed electronically via the Wide Area WorkFlow system.

DLA FLEET READINESS CT SOUTHWEST DLA

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-5359

Solicitation SPE4A6-27-T-5359 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of four units of Bolt, Pawl, Control (NSN 5306-01-666-2216). This item is designated as a Navy Critical Safety Item, requiring strict adherence to quality management standards such as SAE AS9100 for manufacturers or AS9120 for dealers and distributors. The items are to be delivered FOB Origin to DLA Distribution Cherry Point in North Carolina, with a delivery period of 34 days and a need ship date of December 1, 2026. Offerors must submit quotes via the DIBBS portal and are encouraged to provide quantity ranges to accommodate volatile demand. The procurement strictly prohibits the use of additive manufacturing processes unless specifically authorized. Compliance with the Buy American Act and the Berry Amendment is mandatory, and any non-domestic materials must be disclosed. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system, and contractors must register via the Account Management and Provisioning System to access the Vendor Shipment Module. Inspection and acceptance will occur at the point of origin.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days

General Info

Agency

Department Of Defense → FA4659 319 Cons Pk

NAICS

488190 - Other Support Activities for Air Transportation

Place of Performance

Grand Forks AFB, ND, 58205, USA

Set-Aside

NONE

Documents

PWS - Preventative Maintenance Program - Grand Forks AFB

9 pages · sow

High

Sources Sought FA465925QM013 - Sanding and Painting Booth Maintenance

sources-sought

Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseClosed

PostedApr 29

Sources Sought

Notice updatedMay 13

Response deadline changed from May 13, 2025 to May 16, 2025. The notice description changed.

Response DeadlineMay 16

Deadline has passed

Submission Closed

05/16/2025, 09:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA4659 319 Cons Pk

Contacts2 people available

OfficeGRAND FORKS AFB, ND, 58205, USA

Organization / AgencyDepartment Of Defense → FA4659 319 Cons Pk

Office AddressGRAND FORKS AFB, ND, 58205, USA

Contacts

SSgt Jacob Wood

TSgt Angelo Cabuang

Full Description

The 319th Contracting Squadron, Grand Forks AFB, North Dakota, is issuing this Sources Sought as a means of conducting market research to identify parties having the resources to provide the following: SUBJECT: Sanding & Painting Booth Preventative Maintenance The contractor shall provide all management, tools, supplies, equipment, and labor necessary to provide Sanding and Painting Booth preventative maintenance for the Aircraft Structural Maintenance section located on Grand Forks AFB, ND in accordance with the attached draft Performance Work Statement. Submission Instructions: Interested parties who consider themselves qualified to provide the above-listed products are invited to submit a response to this Sources Sought Notice by Fri, 16 May 2025, at 1600 CST. All questions and responses under this Sources Sought Notice must be emailed to SSgt Jacob Wood, Contract Specialist at jacob.wood.4@us.af.mil and TSgt Angelo Mykael Cabuang, Contract Officer at angelomykael.cabuang.1@us.af.mil. For further information, please see attached: 1. Sources Sought 2. PWS