Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

SAW BLADE

Awarded
SPMYM226Q5174Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPMYM226Q5174 is a fixed-price award notice issued by DLA Maritime - Puget Sound for the procurement of four 7'2 x 34 Tough Tooth Power Hacksaw Blades. These proprietary blades are required for E.H Wacch Saw machines used to install service access in US Navy fleet decks and hulls. Due to the specific design and compatibility requirements, the procurement was justified as a sole source from Eastside Saw. The contract is designated as a Total Small Business Set-Aside under NAICS code 332216. The items must be delivered to the Puget Sound Naval Shipyard in Bremerton, Washington, on or before February 20, 2026. Compliance with ASTM-D-3951 for packaging and MIL-STD-130 for unique item identification is mandatory. Payment will be processed electronically through the Wide Area WorkFlow system. Evaluation for the award was based on technical capability, past performance via the Supplier Performance Risk System, and price, utilizing a trade-off process to determine the best value to the government. Contractors must adhere to strict security and supply chain restrictions, including prohibitions on Kaspersky software and certain foreign telecommunications equipment.

General Info

Agency

Department Of Defense → DLA Maritime - Puget Sound

Contract Value

$30,760

NAICS

332216 - Saw Blade and Handtool Manufacturing

Place of Performance

Bremerton, WA, 98314, USA

Set-Aside

SBA

Awardee

EASTSIDE SAW & SALES, INC.

Award Issued Date

Documents

2

Solicitation SPMYM226Q5174 for Saw Blade

PDF, High priority: read this first49 pages · rfq
High

Sole Source Justification 5337-3850 - Eastside Saw

PDF, Low priorityjustification-and-authorization
Low

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Solicitation

Awarded

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Maritime - Puget Sound
Contacts1 person available
OfficeBREMERTON, WA, 98314-5000, USA
Organization / AgencyDepartment Of Defense → DLA Maritime - Puget Sound
Office AddressBREMERTON, WA, 98314-5000, USA
Contacts
Karen Creswell
contact@example.gov
+1 (555) 000-0000

Full Description

Show more

THIS SOLICITATION AND ANY SUBSEQUENT AMENDMENTS WILL BE POSTED TO THE SAM WEBSITE: SAM.GOV


ELECTRONIC SUBMISSION OF QUOTES IS AVAILABLE THROUGH THE SAM WEBSITE.


To be considered for award, if the contractor (awardee) is required to implement NIST SP 800-171, the contractor (awardee) shall have a current assessment as detailed in DFARS 252.204-7019 (I.E., not more than 3 years old unless a lesser time is specified in the solicitation)



**Items deemed to be Commercial Off The Shelf (COTS) are exempt from NIST SP 800-171 requirement.  Must identify and provide information to contracting officer on bid during solicitation period**



  Please read the contract in its entirety.



  If you are able to provide a quote be sure to provide the following information in the sections provided below:



  1. Page 1 BLK 17a. Provide Contractor's info and cage code.
  2. Section A. A1 – 1. Enter The Contractor's POC
  3. Section B. – Enter your Quote and any other info we should know.
  4. Please quote FOB Destination BREMERTON, WA.
  5. Section B. K21 – Check the appropriate box and provide the Manufacturer’s Name, Address and the Country of Manufacturing
  6. Section F. –  Provide the Lead Time and/or Delivery Date.
  7. Section K. - 52.204-24 (d)(1) and (2) Check the applicable boxes
  8. Section K. - 52.209-11 (b)(1) and (2) Check the applicable boxes
  9. Page 1 -  Read box 28 and sign boxes 30 a, b, and c.
  10. Return the signed and filled out solicitation with your quote by SUNDAY, 28 SEPTEMBER  2025 7AM 


FOR YOUR BID TO BE DEEMED RESPONSIVE A SIGNED AND COMPLETED SOLICITATION MUST BE SUBMITTED VIA EMAIL.


contact@example.gov

Similar Contracts

Same NAICS industry code

NAICS: 332216
New
DIBBS
Resistance Wire Supplier (NSN 6145-01-696-3529)This subcontract involves the supply of specialized resistance wire to support prime contractors for the DLA Weapons Support Land Supply Chain. The selected provider is responsible for manufacturing or sourcing wire that strictly adheres to NSN 6145-01-696-3529 and Fairbanks Morse P/N X11.99011-0208 specifications. All deliverables must be marked according to MIL-STD-129 and undergo preservation and packaging in compliance with MIL-DTL-12000. The contract requires strict adherence to DFARS 252.204-7012 cybersecurity standards to ensure data protection. Final delivery of the completed resistance wire is to be made to Tracy, California. This opportunity falls under NAICS code 332216 and is managed through the Department of Defense.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
Supply of Bi-Metal Metal Cutting Band Saw BladesThis subcontract involves the supply of 130 bi-metal metal cutting band saw blades to support prime contractors delivering on Department of Defense contracts for the Jacksonville Building. The required blades must feature a width of 0.500 inches, a thickness of 0.020 inches, 24 teeth per inch, and a welded length of 44.875 inches. All items must strictly correspond to NSN 3455012760708 or McMaster-Carr part number 4051A14. The procurement falls under NAICS code 332216 and requires delivery to a specified DLA destination in Jacksonville, Florida. The solicitation was posted on October 28, 2026, with a response deadline set for November 9, 2026.
JACKSONVILLE BLDG

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
WRENCH, SOCKET
Solicitation # SPE4A6-27-T-7377
Solicitation SPE4A6-27-T-7377 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of three socket wrenches, identified by NSN 5120-00-919-6781. This item is designated as a critical application item with approved part number ST70257 from RTX Corporation and AAR Supply Chain, Inc. The contract requires delivery FOB Origin within 165 days, with a need ship date of April 20, 2027, and an original required delivery date of July 29, 2027. Inspection and acceptance will occur at the destination, governed by FAR 52.246-2. The procurement adheres to strict quality and technical standards, incorporating the DLA Master List of Technical and Quality Requirements and specific sampling plans including MIL-STD-1916, ASQ H1331, or MIL-STD-105/ASQ Z1.4. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation also mandates compliance with various DFARS and FAR clauses, including the Buy American Act, cybersecurity reporting under DFARS 252.204-7012, and prohibitions on covered defense telecommunications equipment.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332216
New
DIBBS
TIP, ELECTRIC SOLDERING
Solicitation # SPE8E5-27-T-0331
This fixed-price solicitation, issued by DLA Troop Support Construction and Equipment, is for the procurement of 73 packages of electric soldering iron tips under NSN 3439-01-396-0278. The items are identified as commercial products and must be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. The required delivery timeframe is 167 days after receipt of order, with a need ship date of April 26, 2027. The government will not evaluate offers that utilize additive manufacturing for these items. The contract mandates strict adherence to various technical and quality standards, including MIL-STD-129 for marking, MIL-STD-2073-1E and ASTM-D-3951-98 for packaging, and MIL-STD-147 for palletization. Compliance with the Buy American and Balance of Payments Program is required for quotes exceeding the micro-purchase threshold. Additionally, the contractor must comply with cybersecurity requirements under DFARS 252.204-7012 and provide electronic invoicing via the Wide Area WorkFlow system. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. Quotations are due by November 9, 2026.
DEPOT OKLAHOMA

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
CLAMP, TOGGLE, HAND
Solicitation # SPE8E9-27-T-0336
Solicitation SPE8E9-27-T-0336 is a procurement request from the Defense Logistics Agency for 92 units of hand toggle clamps, identified by NSN 3444014731548. The items must be new and unused, with a required delivery date of March 23, 2027, and a need ship date of April 26, 2027. Delivery is set as FOB Destination, with the shipping destination being DLA Distribution San Joaquin in Tracy, California. The procurement is managed under the First Destination Transportation program to optimize government-arranged shipping costs. The contractor must adhere to strict quality and packaging standards, including ASTM-D-3951-98 for commercial packaging, MIL-STD-129 for marking and labeling, and RP001 for palletization. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, specifically those regarding the Buy American Act, safeguarding covered defense information, and the prohibition of certain telecommunications equipment. All quotes must be submitted via the DLA Internet Bid Board System.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
CABLE, RADIO FREQUENCY
Solicitation # SPE7M1-27-T-1768
Solicitation SPE7M1-27-T-1768, issued by the DLA Weapons Support Maritime Supply Chain, seeks the procurement of 500 feet of radio frequency cable, identified by NSN 6145-01-552-7133. A critical requirement of this acquisition is that the material must be provided as one continuous length per spool; because the advice code is 2N, multiple unit packs are strictly unacceptable. The delivery is required within 20 days after receipt of the order, with a required delivery date of October 30, 2026. The shipment is FOB Origin, with inspection and acceptance occurring at the destination in Patrick SFB, Florida. The contractor must adhere to strict packaging and marking standards, including MIL-DTL-12000 for cable preservation, MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking. Palletization must comply with DLA requirement RP001. The contract incorporates various FAR and DFARS clauses, including the Buy American Act, Berry Amendment, and specific cybersecurity reporting requirements under DFARS 252.204-7012. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. Quotations are due by November 9, 2026, and must include all required representations and certifications regarding business size and socioeconomic status.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
BLADE, BAND SAW, METAL C
Solicitation # SPE8E5-27-T-0320
Solicitation SPE8E5-27-T-0320 is a small business set-aside procurement issued by the Defense Logistics Agency for 130 metal cutting band saw blades. The required items are bi-metal material blades measuring 0.500 inches wide and 0.020 inches thick, featuring 24 teeth per inch and a welded length of 44.875 inches. The equipment is identified by NSN 3455012760708 and corresponds to McMaster-Carr supply company part number 4051A14. Delivery is required within 167 days after order, with an original required delivery date of April 2, 2027, and a need ship date of April 26, 2027. The items are to be delivered FOB Origin to DLA Distribution Jacksonville, Florida. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 and ASTM D3951, though DLA Master List technical and quality requirements take precedence. Palletization must follow RP001 guidelines. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and specific DFARS clauses regarding cybersecurity, the prohibition of hexavalent chromium, and restrictions on telecommunications equipment from certain foreign entities.
JACKSONVILLE BLDG

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
RESISTANCE WIRE
Solicitation # SPE7L1-27-T-2898
Solicitation SPE7L1-27-T-2898 is a small business set-aside issued by the DLA Weapons Support Land Supply Chain for the procurement of resistance wire, identified by NSN 6145-01-696-3529. The requirement is for one unit with a delivery period of 158 days, establishing a required delivery date of April 17, 2027. Performance and delivery are designated for Tracy, California, with inspection and acceptance occurring at the destination. Offers must be submitted based on FOB Origin by the deadline of November 9, 2026. The contract is governed by strict technical and quality standards, including MIL-DTL-12000 for packaging and MIL-STD-129 for marking. It incorporates various FAR and DFARS clauses, notably those regarding the Buy American Act, the Berry Amendment, and stringent cybersecurity requirements under DFARS 252.204-7012. Payment is processed electronically via the Wide Area WorkFlow system. Notably, the government will not evaluate offers utilizing additive manufacturing, and a price evaluation preference is available for HUBZone concerns.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332216
New
DIBBS
WRENCH, SPANNER
Solicitation # SPE4A6-27-T-7448
Solicitation SPE4A6-27-T-7448 is for the procurement of eight spanner wrenches under NSN 5120-00-775-3744. The items are designated as critical application items and may require casting or forging for manufacture, with special tooling typically involved. An unrestricted technical data package is available through the Defense Supply Center Richmond. The required delivery date is April 13, 2027, with a delivery window of 158 days. Shipping is established as FOB Origin, with the final destination being the DLA Distribution Depot in Bremerton, Washington. Quality and inspection requirements are stringent, requiring origin inspection per FAR 52.246-2 and a manufacturer inspection system compliant with SAE AS9003 or ISO 9001. Packaging must adhere to ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. The contract incorporates several federal and defense regulations, including the Buy American Act, NIST SP 800-171 cybersecurity standards, and a price evaluation preference for HUBZone small businesses. All quotes must be submitted via the DLA Internet Bid Board System.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332216
New
DIBBS
TOOLSETASSEMBLY
Solicitation # SPE4A7-27-Q-0148
Solicitation SPE4A7-27-Q-0148 is a small business set-aside request for quotations for the procurement of one Toolset Assembly, identified by NSN 1680-01-597-6714. The requirement is for unused former Government surplus property that must be new and not deteriorated. The contract is a firm fixed price agreement with a delivery requirement of 238 days after order. Delivery is specified as FOB Origin, with the final destination being Fort Bragg, North Carolina. Technical compliance is based on TDP Rev A Gen 6 and various reference drawings dated December 18, 2015. Quality assurance involves inspection and acceptance at origin, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. Packaging must adhere to ASTM D3951 and MIL-STD-129, with specific requirements for product verification test samples and the removal of government identification from non-accepted supplies. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to DFARS 252.204-7012 for safeguarding covered defense information. Item Unique Identification is not required per the service customer's request.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332216
New
DIBBS
REMOVER, PREFORMED PACK
Solicitation # SPE4A6-27-T-7322
Solicitation SPE4A6-27-T-7322 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of four units of Remover, Preformed Packing, identified by NSN 5120012037950. The requirement is categorized under NAICS code 332216 and is designated as a critical application item. Delivery is required within 113 days after order, with a required delivery date of October 21, 2026. The shipping terms are FOB Origin, with the destination for both inspection and acceptance being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment, and cybersecurity reporting under DFARS 252.204-7012. Quotes must be submitted via the DLA Internet Bid Board System by November 5, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332216
New
Federal
Tools for Veteran
Solicitation # 36C10D26Q0171
Solicitation 36C10D26Q0171 is a competitive Small Business set-aside issued by the Department of Veterans Affairs for the procurement of brand-name Snap-on tools. This one-time, definite-quantity purchase order consists of 254 contract line items, including a wide array of automotive hand tools, diagnostic equipment, and power tool kits. The requirement is strictly limited to Snap-on brand products; substitute or equal products are not acceptable. The final delivery destination is a Veteran's residential address in Malvern, Pennsylvania, with delivery timeframes ranging from 60 to 150 calendar days after receipt of order. The government will award a single all-or-none purchase order to the responsible offeror determined to be most advantageous based on price and technical factors, which are weighted equally. Technical evaluations are conducted on a pass/fail basis, focusing on strict compliance with part numbers and model numbers, as well as estimated delivery timeframes. Partial quotes will not be considered. Offerors must submit their proposals in three distinct volumes covering technical specifications, pricing, and required certifications, including a completed Snap-on tools list in Excel format. The solicitation has undergone six amendments, with the final deadline for receipt of quotations extended to November 2, 2026.
Veterans Benefits Administration (36C10D)

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → DLA Maritime - Puget Sound

Same awarding agency

NAICS: 541380
New
Federal
Compliance Certification and Testing ServicesThis small business set-aside subcontract for DLA Maritime - Puget Sound involves providing compliance certification and testing services in Bremerton, Washington. The selected contractor will perform quality verification for prime contractors, specifically validating material weight, dimensions, and fire and weather resistance according to A-A-55308 standards. Additionally, the scope includes ensuring color matches against FED STD 595 Green #24108 and verifying all marking requirements. To execute these tasks, the contractor must utilize spectrophotometry tools and textile testing equipment. The primary deliverable for this engagement is a completed Certificate of Compliance in accordance with DI-MISC-81356A. This project falls under NAICS code 541380 and is managed by the Department of Defense.
Testing Laboratories and Services

POSTED

about 16 hours ago

DEADLINE

in about 17 hours
View Details
NAICS: 313310
New
Federal
Waterproof and Fire-Resistant Laminated Cloth Manufacturer/SupplierThis small business set-aside subcontract involves the manufacture and supply of specialized waterproof, fire-resistant, and weather-resistant laminated cloth for prime contractors supporting DLA Maritime projects. The supplier is required to produce plastic vinyl chloride cloth that adheres to FED STD 595 and A-A-55308 Type 1 Class 3 FM 1 standards. Technical specifications mandate a mercury-free composition, a weight between 17.1 and 19.8 oz/sq yd, and the inclusion of black bold Arial FR markings every 24 inches. The contract requires the delivery of 150 rolls of compliant, marked cloth to the Puget Sound Naval Shipyard located in Bremerton, Washington. Managed under the Department of Defense, this procurement falls under NAICS code 313310 and is specifically designated as a total small business set-aside.
Textile and Fabric Finishing Mills

POSTED

about 16 hours ago

DEADLINE

in about 17 hours
View Details
NAICS: 332999
New
Federal
Supply of .524" Brass Pop-A-Plug CPI/Perma KitsThis small business set-aside subcontract involves the supply of 80 brass plugging kits for prime contractors supporting DLA Maritime projects at the Puget Sound Naval Shipyard in Bremerton, Washington. Each kit must include ten .524 inch plugs and one Universal Go/No-go gage, specifically designed to withstand operating pressures of 1000PsiG and temperatures up to 400F. The required hardware is specified as Curtiss-Wright EST Group part number V524B or an approved equivalent. All deliverables must adhere to ASTM-D-3951 and MIL-STD-130 packaging standards to ensure compliance with Department of Defense requirements.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 14 hours
View Details
NAICS: 332216
New
Federal
POP-A-PLUG
Solicitation # SPMYM227Q1108
Solicitation SPMYM227Q1108 is a total small business set-aside for the procurement of 80 units of .524 inch Brass Pop-A-Plug CPI/Perma Kits, brand name or equal to Curtiss-Wright EST Group. Each kit must include ten plugs and one universal go/no-go gage, meeting specific technical requirements for maximum pressure of 1000PsiG and temperature of 400F. The award will be made to the technically acceptable offeror that is most advantageous to the government, based on price and past performance. Delivery is requested by November 27, 2026, with the destination being the Puget Sound Naval Shipyard in Bremerton, Washington. The contract is a fixed-price agreement requiring electronic invoicing through Wide Area Workflow. Packaging must comply with ASTM-D-3951 and MIL-STD-130 for unique item identification, with a strict prohibition on materials such as asbestos and loose fill polystyrene. Contractors must be registered in the System for Award Management and may be required to implement NIST SP 800-171, though commercial off-the-shelf items are exempt. Submissions must include a signed solicitation and unit-based pricing, with any equal-to product offers requiring full manufacturer specifications for technical evaluation.
Saw Blade and Handtool Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 14 hours
View Details
NAICS: 313310
New
Federal
LAMINATED CLOTH
Solicitation # SPMYM227Q1111
Solicitation SPMYM227Q1111 is a total small business set-aside issued by DLA Maritime - Puget Sound for the procurement of 150 rolls of waterproof, fire-resistant, and weather-resistant laminated cloth. The required material is plastic vinyl chloride in Green #24108, measuring 50 inches wide by 50 to 65 yards long, with a weight between 17.1 and 19.8 ounces per square yard, conforming to FED STD 595 and reference part number A-A-55308 Type 1 Class 3 FM 1. Deliveries are requested by November 30, 2026, with a destination of the Puget Sound Naval Shipyard in Bremerton, Washington. A Certificate of Compliance per DI-MISC-81356A is required for the primary line item. The contract is awarded on a firm-fixed-price basis to the responsible offeror deemed most advantageous to the government, considering price, technical requirements, and past performance. Bids must be submitted via email to Donna Todd by October 29, 2026. To be deemed responsive, submissions must include a signed and completed solicitation, unit pricing, lead times, and manufacturer details. Specific marking requirements include the letters FR in black bold Arial font every 24 inches along the cloth. Invoicing must be processed electronically through Wide Area Workflow (WAWF). Contractors must comply with the Procurement Integrity Act and, unless the items are identified as Commercial Off The Shelf, must provide a current NIST SP 800-171 assessment.
Textile and Fabric Finishing Mills

POSTED

about 16 hours ago

DEADLINE

in about 17 hours
View Details
NAICS: 335910
New
Federal
Specialized Electrical Component SupplyThis subcontract, titled Specialized Electrical Component Supply, involves the provision of subsea-rated electrical components for prime contractors working on DLA Maritime projects under the Department of Defense. The scope of work includes the manufacture or sourcing of rectifiers, inductors, and Metal Oxide Varistors specifically meeting the specifications for part number 149-5399-00. All deliverables must be provided as component kits and adhere to strict quality and traceability standards, including manufacturer batch identification, CAGE codes, and origin documentation in compliance with DLAD Proc Note C03 and the Counterfeit Detection and Avoidance Program. The opportunity is designated as a total Small Business Set Aside under NAICS code 335910, with the place of performance located in Bremerton. Managed by DLA Maritime - Puget Sound, the contract requires a rapid response timeline, with a posting date of October 27, 2026, and a response deadline of October 29, 2026.
Battery Manufacturing

POSTED

1 day ago

DEADLINE

in about 17 hours
View Details
NAICS: 335311
New
Federal
35KVA Subsea Transformer Assembly ManufacturingThis small business set-aside subcontract through DLA Maritime - Puget Sound involves the manufacture and supply of two 35KVA subsea transformer assemblies, specifically part number 149-5399-00. The scope of work requires the integration of rectifiers, inductors, fuses, and Metal Oxide Varistors into a subsea-rated unit, with performance taking place in Bremerton. The contractor must adhere to strict military standards for marking and labeling per MIL-STD-130 and MIL-STD-129. Additionally, the project mandates NIST SP 800-171 compliance and strict adherence to DLAD Proc Note C02/C03 traceability requirements to ensure all components meet Department of Defense specifications.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

1 day ago

DEADLINE

in about 17 hours
View Details
NAICS: 335311
New
Federal
TRANSFORMER ASSEMBLY
Solicitation # SPMYM227Q1102
DLA Maritime Puget Sound is soliciting quotes for a firm-fixed-price supply contract to procure two transformer assemblies, specifically 35KVA subsea units with rectifiers, inductors, fuses, and MOVs, under part number 149-5399-00. The designated source for these items is Tinitron Inc. This procurement is a 100% total small business set-aside and utilizes commercial and simplified acquisition procedures per FAR Parts 12 and 13.5. Delivery is required by January 11, 2027, with shipping terms as FOB Destination to the Puget Sound Naval Shipyard IMF in Bremerton, Washington. To be deemed responsive, offerors must submit a fully completed solicitation package by October 29, 2026, including pricing on a unit price line item basis, CAGE codes, lead times, and manufacturer specification sheets. Award will be granted to the responsible offeror whose proposal is most advantageous to the government, based on technical criteria, price, and past performance evaluated via the Supplier Performance Risk System. Contractors must maintain active registration in SAM.gov and adhere to strict marking and labeling standards per MIL-STD-130 and MIL-STD-129. Additionally, unless the items are identified as Commercial Off The Shelf, awardees may be required to implement NIST SP 800-171 cybersecurity standards. Invoicing must be processed electronically through Wide Area Work Flow.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

1 day ago

DEADLINE

in about 17 hours
View Details
NAICS: 332212
Federal
Supply of Setting Rings (2.4" and Other Sizes)This subcontract, issued by the Department of Defense through DLA Maritime - Puget Sound, requires the supply of 14 precision setting rings designed for the calibration and verification of TESA/Brown & Sharpe internal micrometers. The order specifically includes a 2.4 inch ring and requires all units to be compatible with the 599-281 series system while providing certified dimensional accuracy. The contract is designated as a total Small Business Set Aside under NAICS code 332212. Performance for this requirement will take place in Bremerton, Washington, with the solicitation posted on August 10, 2026.
Hand and Edge Tool Manufacturing

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 332212
Federal
Supply of TESA/Brown & Sharpe Intrimik Internal Micrometers (0.7"–7.0")This subcontract, issued by the Department of Defense through DLA Maritime - Puget Sound, involves the procurement of 29 TESA/Brown & Sharpe Intrimik precision internal micrometers. These analog tools, ranging from 0.7 to 7.0 inches, are designed under the ABBE principle to ensure high-accuracy measurements and will serve as direct replacements for existing 599-281 series tools within PSNS toolrooms and calibration laboratories. The contract is designated as a total Small Business Set Aside under NAICS code 332212. Performance of the contract will take place in Bremerton, Washington, with the official posting date set for August 10, 2026.
Hand and Edge Tool Manufacturing

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 811212
Federal
Warranty, Maintenance & Repair ServicesThis contract provides comprehensive post-delivery technical support, preventive maintenance, and repair services specifically for HandyScan 3D scanning units operated in industrial environments. The services are designed to ensure uninterrupted performance and longevity of the equipment, with all work performed in accordance with industry standards and under the oversight of the Department of Defense through DLA Maritime - Puget Sound. The scope encompasses proactive maintenance measures to prevent system failures, timely repairs to restore functionality, and responsive technical assistance tailored to the high-demand conditions of industrial use. The contract is structured as a small business set-aside under the SBA program, with the NAICS code 811212 indicating it pertains to electronic and precision equipment repair and maintenance. Performance is required at the designated location in Bremerton, Washington, with a zip code of 98314. Although the solicitation number and point of contact are not provided, the contract was posted on July 1, 2026, and is classified as a subcontract under federal procurement regulations. All work must comply with federal standards and be executed by a qualified small business entity to meet the set-aside requirement.
Computer and Office Machine Repair and Maintenance

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 238990
Federal
On-Site Installation & System Integration ServicesThe contract entails on-site installation, calibration, and full integration of advanced 3D scanning systems with existing software and hardware infrastructure at the Puget Sound Naval Shipyard in Bremerton, Washington, with a zip code of 98314. The work involves ensuring seamless compatibility between the new scanning technology and current military-grade systems, requiring specialized technical expertise to support naval operations and maintenance workflows. All services must be performed directly at the facility, with no remote or off-site alternatives permitted. This is a subcontract awarded under a Total Small Business Set-Aside classification per FAR 19.5, meaning only small businesses are eligible to bid, and the North American Industry Classification System code 238990 applies to other specialized construction services. The contract is managed by DLA Maritime under the Department of Defense and was posted on July 1, 2026, with performance expected to occur at the shipyard location. The nature of the work demands compliance with federal defense standards, secure handling of proprietary systems, and coordination with shipyard personnel to minimize operational disruptions during implementation.
All Other Specialty Trade Contractors

POSTED

4 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332216
Federal
Manufacture and Supply of SAW BLADE (Commercial Off-The-Shelf or Custom Fabrication)
DLA Maritime - Puget Sound

POSTED

10 months ago

DEADLINE

N/A
View Details
NAICS: 332216
Closed
DIBBS
GUIDE, DRILL
Solicitation # SPE4A6-26-T-413Y
ASC COMMODITIES DIVISION

POSTED

10 months ago

CLOSED

10 months ago
View Details
NAICS: 332216
Federal
Vehicle Recompete: Idc SPE4A722D5446
DLA Aviation

POSTED

10 months ago

DEADLINE

N/A
View Details
NAICS: 332216
Closed
Federal
51--SWAGING,TOOL,BEARIN
Solicitation # SPE4A626T381S
DLA Aviation

POSTED

10 months ago

CLOSED

10 months ago
View Details
NAICS: 332216
Closed
Federal
51--TOOL KIT,AIRCRAFT M
Solicitation # SPE4A626U0869
DLA Aviation

POSTED

10 months ago

CLOSED

10 months ago
View Details
NAICS: 332216
Awarded
Federal
51--JACK,LEVELING-SUPPO
Solicitation # SPE4A626Q0288
DLA Aviation

POSTED

10 months ago

DEADLINE

N/A
View Details
NAICS: 332216
Awarded
Federal
Purchase of NSN 5133016411062, SEALANT REMOVAL BIT
Solicitation # 47QSSC26Q0022
Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

11 months ago

DEADLINE

N/A
View Details
NAICS: 332216
Awarded
Federal
61--CABLE,SPECIAL PURPO
Solicitation # SPE7M125T320F
DLA Land And Maritime

POSTED

11 months ago

DEADLINE

N/A
View Details
NAICS: 332216
Closed
Federal
61--CABLE ASSEMBLY,SPEC
Solicitation # SPE4A626U0835
DLA Aviation

POSTED

11 months ago

CLOSED

10 months ago
View Details
NAICS: 332216
Closed
Federal
RFI 2 - Small Arms Tool Kit (NSN: 5180-01-670-9469)
Solicitation # 25R0163
W6QK Acc- Dta

POSTED

11 months ago

CLOSED

10 months ago
View Details
NAICS: 332216
Awarded
Federal
51--TOOL,SWAGING BEARIN
Solicitation # SPE4A725R0853
DLA Aviation

POSTED

11 months ago

DEADLINE

N/A
View Details
NAICS: 332216
Awarded
Federal
30--GEARSHAFT,SPUR
Solicitation # SPE7L326T3530
DLA Land And Maritime

POSTED

11 months ago

CLOSED

10 months ago
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS