Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SCREW ASSEMBLY, PANE

Active
SPE4A4-26-T-0178Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a screw assembly for panel use under solicitation SPE4A4-26-T-0178, with a quantity of four units at a unit price of $4.00, totaling $16.00. Delivery is required within 20 days FOB destination, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific coding for preservation, wrapping, and containerization, with no special markings required. The item is identified by NSN 5305-01-651-1186 and part number 123SME90121-51, and unit of issue is each. Technical and quality requirements are governed by the DLA Master List, while cybersecurity compliance mandates CMMC Level 2 self-assessment. Sampling follows MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, and zero non-conformances required unless otherwise stated. Item Unique Identification is waived per government request, and physical marking must adhere to RQ017. The delivery address is a military installation in Iwakuni, Japan, with freight shipment details referencing DLAD procedural notes. The required delivery date is May 23, 2025, and the solicitation was posted July 19, 2026, with a response deadline of July 27, 2026.

General Info

Four screw assemblies at $4 each, delivered FOB destination to Iwakuni, Japan by May 23, 2025, per military standards.

Agency

Department Of Defense → SUPPLIER OPER SUPPLIER SPT DIVView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

OPC 561 BOX 24, FPO, AP, 96310-7305, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A4-26-T-0178 for DLA Aviation Supplies

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → SUPPLIER OPER SUPPLIER SPT DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → SUPPLIER OPER SUPPLIER SPT DIV
View Agency Profile
Office AddressUS
Contacts
Parag Shah
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SCREW ASSEMBLY,PANE
SCREW ASSEMBLY, PANEL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
NORTHROP GRUMMAN SYSTEMS CORPORATION 79RG9 P/N 123SME90121-51
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7012417249 0001 EA 4.000
SPE4A4-26-T-0178
SECTION B
PR: 7012417249 PRLI: 0001 CONT’D
NSN/MATERIAL:5305016511186
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
R51211
COMMANDING OFFICER
ASD IWAKUN
OPC 561 BOX 24
FPO AP 96310-7305
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R51211
CO ASD IWAKUNI R51211
BLDG 6100 MCAS IWAKUNI
MISUMI-MACHI/IWAKUNI-SHI
YAMAGUCHI-KEN 7400025
JP
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
M/F: (TCN) R512115140DD01
RDD: 777
PROJ: BK0 TP 2
SUPP ADD: YWC410 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A41 DIST: 9B ADV: FC: 7L
Need Ship Date:00/00/0000 Original Required Delivery Date:05/23/2025
SPE4A4-26-T-0178
SECTION B
PR: 7012417249 PRLI: 0001 CONT’D

SPE4A4-26-T-0178 NSN/Part Number: 5305-01-651-1186 Quantity: 4 EA Purchase Request: 7012417249QTY: 4 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
Externally Relieved Body Screw Supply (Fastener Manufacturing)The contract entails the manufacture and supply of thirteen externally relieved body screws designed to meet exacting military specifications and packaging standards, ensuring compatibility and reliability in defense applications. These fasteners are critical components intended for use in high-performance military systems where precision and durability are paramount. The work is being executed under a subcontract arrangement administered by the Defense Logistics Agency, part of the Department of Defense, with the North American Industry Classification System code 332722 identifying the activity as miscellaneous fabricated metal product manufacturing. All units must be produced, inspected, and packaged in strict compliance with applicable defense requirements to ensure seamless integration into existing military logistics and operational workflows. The solicitation was posted on July 20, 2026, and the contract is identified by the number SPE4A662PX381, with performance occurring under the oversight of the DLA without specific geographic constraints provided.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

N/A
View Details
NAICS: 332722
New
DIBBS
Close Tolerance Screw Manufacturing and SupplyThe contract involves the precision machining and delivery of 16 units of a military-spec close tolerance screw designated by NSN 5305015209398, requiring strict adherence to defense quality standards throughout all stages of production. The work encompasses complete manufacturing responsibilities including material sourcing, CNC machining to tight tolerances, rigorous inspection protocols, proper packaging, and FOB delivery to meet Department of Defense requirements. The subcontract falls under NAICS code 332722, indicating it is classified within the machine shop and turned product manufacturing sector, and is tied to the Defense Logistics Agency under the broader Department of Defense procurement structure. The contract was posted on July 20, 2026, and the place of performance and point of contact details are not specified, but delivery is expected to comply with FOB terms, meaning the supplier assumes all liabilities and costs until the goods are loaded onto the carrier at the designated point of origin.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

N/A
View Details
NAICS: 332722
New
DIBBS
Helical Compression Spring Manufacturing and SupplyThe contract calls for the manufacture and supply of eight helical compression springs designated by NSN 5360-01-605-8091 and part number 160-15-12, with full compliance to Department of Defense technical standards governing material composition, dimensional tolerances, load characteristics, and surface finish. All units must adhere strictly to packaging and marking requirements as defined by DLA, including proper labeling, traceability codes, and handling instructions, while also complying with all applicable hazardous material restrictions to ensure safe transport and storage. The springs are intended for use within military logistics systems and must be delivered in a configuration ready for immediate integration without additional modification. The solicitation is classified as a subcontract under NAICS code 332722, with a response deadline of July 31, 2026, and a posting date of July 20, 2026. The place of performance is specified as Greensboro, North Carolina, with a zip code of 27409, indicating where final delivery and acceptance will occur. The contracting authority is the Land Supply Chain under the Department of Defense, though no specific point of contact or set-aside classification is provided. Bidders must ensure full alignment with DLA’s contractual and technical expectations, including documentation, quality assurance protocols, and adherence to federal supply chain security measures.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
Precision Screw Component SupplyThe contract entails the supply of a precision-machined screw component identified by NSN 5305-01-049-5939, manufactured to stringent military specifications ensuring quality, traceability, and compliance with all required inspection and marking standards. Each unit must adhere to defined packaging and logistics protocols to facilitate seamless handling and acceptance at a Defense Logistics Agency distribution center. The component falls under NAICS code 332722 and is procured as a subcontract under the Department of Defense, with the Defense Logistics Agency serving as the overseeing agency. Delivery must meet all federal and military logistics requirements, including proper documentation and labeling, to ensure full regulatory compliance and operational readiness. The solicitation was posted on July 20, 2026, and the performance location is managed under DLA’s centralized distribution network.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

N/A
View Details
NAICS: 332722
New
DIBBS
Precision Welded Stud ManufacturingThe contract requires full-cycle manufacturing of 31 welding studs with NSN 5307-01-722-3367, strictly adhering to DLA technical specifications. The work encompasses all stages of production including machining, welding, inspection, packaging, and delivery, ensuring the final products meet military-grade quality and performance standards. All manufacturing activities must be completed in compliance with the detailed requirements outlined by the Department of Defense through the ASC Commodities Division. This is a subcontract opportunity with a NAICS code of 332722 for precision forged and stamped metal products. The solicitation was posted on July 20, 2026, and responses are due by July 28, 2026. The place of performance is designated as FPO with a ZIP code of 96349, indicating delivery to a military postal address. The contract does not specify a set-aside status, and while the point of contact information is not provided, interested parties can access further details through the official DIBBS procurement portal.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Precision Machining of NAS-Specification ScrewsThe contract involves the manufacture of 1,971 purchase groups of machine screws conforming to NSN 5305010779906 and NAS1801-3-10 standards with a Class 3A thread specification, fully compliant with NAS1801 Revision 4 and NAS4002 Revision 12. These components are precision-machined to meet strict military and aerospace quality requirements, ensuring dimensional accuracy, material integrity, and functional performance under demanding operational conditions. The work is being performed under a subcontract tied to the Defense Logistics Agency, with the North American Industry Classification System code 332722 indicating specialized metal finishing and threading operations. The solicitation was posted on July 20, 2026, and the contract is linked to the DIBBS system under award numbers SPE4A626D61QJ and SPE4A626F256K. While no specific place of performance or point of contact is listed, the effort is part of the Department of Defense’s broader supply chain infrastructure supporting critical defense systems. The nature of the contract requires adherence to stringent technical specifications and quality assurance protocols inherent in defense-grade fastener production, with all units expected to meet or exceed the referenced NAS standards for reliability and interchangeability in military applications.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

N/A
View Details
NAICS: 332722
New
DIBBS
Precision Fastener Manufacturing – Machine Screws (NSN: 5305-00-182-9481)The contract requires the manufacture and delivery of 1,319 military-specification machine screws conforming to NASM27039 standards, with packaging compliant with ASTM D3951 and labeling aligned with MIL-STD-129. All items must fully meet stringent military specifications, with zero tolerance for non-conformance, and inspections are conducted upon arrival at the designated performance location. The screws are identified by NSN 5305-00-182-9481 and fall under NAICS code 332722, indicating classification within the manufacturing of screw, nut, and bolt production. The place of performance is Robins AFB, Georgia, with delivery expected to occur at this location. The solicitation was posted on July 20, 2026, and responses are due by July 28, 2026, under a subcontract arrangement managed by the ASC Commodities Division of the Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Precision Fastener Manufacturing – Lock WashersThe contract entails the manufacture and supply of 1,300 lock washers identified by NSN 5310-01-555-0024, with strict adherence to military specifications governing material composition, dimensional tolerances, surface plating, and mechanical performance characteristics. All components must meet defined standards to ensure reliability and compatibility in defense and military applications, with quality control and compliance rigorously enforced throughout production. The work is classified as a subcontract under NAICS code 332722, indicating precision fastener manufacturing, and is administered by the Defense Logistics Agency under the Department of Defense. The contract was posted on July 20, 2026, and is linked to award record SPE4A626PY481, though no specific delivery location or point of contact is provided in the available data.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

N/A
View Details
NAICS: 332722
New
DIBBS
Precision Metal Washer ManufacturingThe contract calls for the manufacture of 5,000 precision flat washers that must fully comply with NAS1149 Revision 8 and the DLA Master List specifications, demanding zero-defect quality standards enforced through MIL-STD-1916 or an equivalent sampling plan. Production must meet stringent military-grade tolerances and material requirements to ensure reliability and performance in critical applications. The work is classified as a subcontract under NAICS code 332722, with the place of performance located in Corpus Christi, Texas, at ZIP code 78419-5255. The solicitation was posted on July 20, 2026, and responses are due by July 28, 2026, with the contracting entity being the ASC Commodities Division under the Department of Defense. The procurement is managed through the DIBBS system, and all bidders must demonstrate capability to deliver defect-free components in full compliance with federal quality and inspection protocols.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Precision Manufacturing of Retaining RingsThe contract requires the manufacture of three retaining rings, part number MS16633-1050, to exacting military specifications including MIL-DTL-21248F and MS16633E, with strict adherence to zero-defect quality standards as defined by MIL-STD-1916. The product must be produced to meet all dimensional, material, and performance criteria outlined in these standards, ensuring full compatibility and reliability in defense applications. Quality control processes must be robust and verifiable, with documented compliance throughout production and inspection phases to guarantee conformance without deviation. The solicitation is issued under a subcontract type by the ASC Commodities Division within the Department of Defense, with performance to be carried out at a facility in New Cumberland, Pennsylvania, 17070-5002. The North American Industry Classification System code 332722 identifies the manufacturing category as machine shops and turned product fabrication. The opportunity was posted on July 20, 2026, with a deadline for response set for July 28, 2026, indicating a tight turnaround for qualified suppliers to submit proposals through the DIBBS platform. All submissions must demonstrate technical capability, quality assurance readiness, and capacity to fulfill the order on schedule under the specified defense standards.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Precision Machine Screw Manufacturing (NSN 5305-01-646-5007, P/N BACS12CK04U4P)The contract requires the manufacture and delivery of 115 units, plus or minus 10%, of a precision machine screw compliant with Boeing’s BACS12CK04U4P specification and applicable military standards. Each item must adhere to stringent technical requirements covering material composition, dimensional tolerances, surface finish, and performance characteristics to ensure interoperability and reliability in defense applications. The screws are identified by NSN 5305-01-646-5007 and must be packaged and marked in full compliance with Defense Logistics Agency procurement guidelines, including proper labeling, documentation, and traceability provisions. Manufacturing is governed under NAICS code 332722, indicating production within the threaded fastener and hardware subsector of the defense industrial base. The contract is classified as a subcontract issued under the Department of Defense, specifically managed by the Defense Logistics Agency, and is linked to a broader procurement effort supporting national defense infrastructure. Although the place of performance and point of contact details are not specified, the work must be completed in alignment with DLA’s acquisition timeline and quality assurance protocols, with delivery expected to support scheduled military logistics needs under the referenced contract identifier.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

N/A
View Details
NAICS: 332722
New
DIBBS
Precision Optical Lens Supply for Military Lighting SystemsThe contract involves the supply of 17 military-specification optical lenses designated by NSN 6220-01-551-2873, specifically for integration into aircraft lighting systems. These lenses must meet strict defense logistics standards to ensure performance, durability, and compatibility in operational environments. The work is being executed under a subcontract arrangement linked to the Defense Logistics Agency, which operates under the Department of Defense, and falls under the NAICS code 332722 for optical instrument and lens manufacturing. While the solicitation number is not provided, the contract was posted on July 20, 2026, and is identifiable by the contract number SPE4A626PY348 through the DIBBS portal. Although specific delivery locations and points of contact are not detailed, the performance and compliance requirements are aligned with federal defense procurement protocols, emphasizing quality assurance and adherence to technical specifications critical for mission-critical aviation systems.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → SUPPLIER OPER SUPPLIER SPT DIV

Same awarding agency

NAICS: 541611
New
DIBBS
Small Business Compliance and Socioeconomic Certification SupportThe contract seeks to provide consulting and administrative support for small business certifications essential to Department of Defense contracting, including WOSB, SDVOSB, and HUBZone certifications, as well as registration for UEI and CAGE codes. The work will assist small businesses in navigating the complex compliance requirements necessary to qualify for federal contracting opportunities, with a focus on ensuring accurate documentation and timely submissions to meet federal standards. This support is critical for helping businesses gain and maintain eligibility under socioeconomic programs that promote participation by underrepresented or disadvantaged groups in defense contracting. The contract is structured as a subcontract under the NAICS code 541611, which corresponds to management consulting services, and the place of performance is designated as FPO with ZIP code 96310-7305. The solicitation was posted on July 19, 2026, with a response deadline of July 27, 2026, indicating a tight turnaround for potential offerors. The agency issuing the solicitation is the Department of Defense, specifically under the Supplier Operations Supplier Support Division, and the work must be performed in alignment with DoD requirements and compliance protocols. While no set-aside designation is specified, the nature of the services clearly targets organizations that can demonstrate expertise in small business federal certification processes and administrative support systems.
Administrative Management and General Management Consulting Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 483112
New
DIBBS
Domestic and International Freight Logistics (FOB Destination)The contract covers the transportation and final delivery of goods to Iwakuni, Japan under FOB Destination terms, meaning the supplier is responsible for all costs and risks until the goods reach the designated destination in Japan. This includes arranging international freight, managing customs clearance procedures, and coordinating with local government authorities to ensure compliance with inspection requirements. The service scope encompasses both domestic and international logistics phases leading to the final delivery point, ensuring complete end-to-end handling from origin to final destination. The solicitation is issued as a subcontract under the Department of Defense, with the performing agency listed as SUPPLIER OPER SUPPLIER SPT DIV. The NAICS code 483112 indicates classification under maritime cargo transportation. The response deadline is set for July 27, 2026, with the solicitation posted on July 19, 2026. The place of performance is identified as FPO with ZIP code 96310-7305, which corresponds to a military mail address typically used for overseas military installations, suggesting the goods are ultimately destined for U.S. military facilities in Japan.履约方需确保所有物流环节符合美国国防部的合规要求，并保障运输过程中的全程可控与可追溯。
Deep Sea Passenger Transportation

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and Labeling ServicesThe contract requires the provision of packaging and labeling services strictly compliant with MIL-STD-2073-1E for defense logistics shipments, ensuring all items are protected, stored, and transported according to military standards for durability and environmental resilience. It further mandates adherence to MIL-STD-129 for labeling requirements, including clear identification, barcoding, and tracking information to support accurate inventory management across the defense supply chain. Hazard communication must be fully integrated into the labeling process, conforming to all applicable safety and regulatory protocols for transporting dangerous goods or sensitive materials. The work is structured as a subcontract under the Department of Defense, with performance to be completed at FPO, zip code 96310-7305. The NAICS code 493190 indicates it falls under Other Transportation Support Activities, emphasizing logistics and support functions rather than direct manufacturing. The solicitation was posted on July 19, 2026, with responses due by July 27, 2026, and the primary focus is on ensuring full regulatory compliance for defense logistics operations, with no set-asides indicated for specific business categories.
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332721
New
DIBBS
Screw Assembly Manufacturing and SupplyThe contract involves the manufacture and delivery of four units of a Screw Assembly identified by NSN 5305016511186, requiring full compliance with military specifications and quality standards. The work is structured as a subcontract under the Department of Defense, with the performing agency listed as SUPPLIER OPER SUPPLIER SPT DIV, and the place of performance designated as FPO, zip code 96310-7305. The North American Industry Classification System code 332721 confirms the scope relates to screw, nut, and bolt manufacturing. The solicitation was posted on July 19, 2026, with a response deadline set for July 27, 2026, indicating a narrow window for submission and evaluation. All deliverables must meet stringent defense requirements, ensuring reliability and performance in operational environments.
Precision Turned Product Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance & Inspection ServicesThe contract requires the performance of quality assurance and inspection services adhering strictly to MIL-STD-1916 or ASQ Z1.4 standards, with an absolute mandate for zero non-conformances to meet the requirements of ISO 9001:2015. This subcontract is focused on ensuring rigorous product and process compliance through detailed inspection protocols, where any deviation from the specified standards is unacceptable. The work must be executed to uphold the highest levels of quality control, reflecting a zero-tolerance policy for defects and non-compliance. The contract was posted on July 16, 2026, with a response deadline of July 24, 2026, and is classified under NAICS code 541330 for scientific and technical consulting services. The place of performance is established at New Cumberland, Pennsylvania, with the acquiring organization being the Department of Defense under the Supplier Operations Supplier Support Division. The contract is structured as a subtotal and does not specify a set-aside type or organization type, indicating it is open to broader competition within the defense supply chain context. Interested parties must respond by the deadline to be considered for award.
Engineering Services

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity & CUI Compliance (NIST SP 800-171)The contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to safeguard Covered Defense Information and ensure readiness for CMMC Level 2 compliance. This is a subcontract under the Department of Defense, specifically managed by the SUPPLIER OPER SUPPLIER SPT DIV, with performance required at NEW CUMBERLAND, PA 17070-5002. The solicitation, identified by the NAICS code 541512, is aimed at cybersecurity services supporting federal defense information protection standards, and responses must be submitted by July 24, 2026. The effort centers on aligning systems and processes with NIST’s framework to meet mandatory federal cybersecurity requirements for handling Controlled Unclassified Information within the defense supply chain.
Computer Systems Design Services

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 541380
New
DIBBS
Radioactive Materials Notification & HandlingThis contract requires the provision of advance notification and full compliance with regulatory protocols for shipments containing radioactive materials, as mandated by DFARS clause 52.223-7. The subcontract is issued under NAICS code 541380 and is associated with the Department of Defense through its Supplier Operations Support Division, with performance specifically required at a location in New Cumberland, Pennsylvania, 17070-5002. All parties must ensure timely communication and adherence to federal transportation and handling standards for radioactive substances, including documentation, labeling, and safety procedures, to maintain regulatory alignment and operational security. The submission window for responses is strictly limited to the period between July 16, 2026, and July 24, 2026, with no flexibility permitted beyond the stated deadline.
Testing Laboratories and Services

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & SDS ManagementThe contract requires the preparation and ongoing management of Safety Data Sheets for hazardous materials to ensure full compliance with OSHA’s Hazard Communication Standard and Defense Federal Acquisition Regulation Supplement requirements. This subcontract focuses on maintaining accurate, up-to-date SDS documentation that meets federal safety and reporting standards, with performance centered in New Cumberland, Pennsylvania, under a NAICS code associated with scientific and technical consulting services. Respondents must submit proposals by the specified deadline, and the work is being procured by the Department of Defense through its Supplier Operations Support Division to support defense-related hazardous material handling and regulatory adherence.
Environmental Consulting Services

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 325510
New
DIBBS
Electrical Insulation Tape SupplyThe contract solicits the supply of eight units of electrical insulation tape with NSN 5970016562695, identified as a commercial off-the-shelf item intended for use by the Department of Defense. The requirement is issued under a subcontract structure, with the NAICS code 325510 categorizing it under the plastics and rubber products manufacturing sector. The offer is open for responses until July 24, 2026, and was posted on July 16, 2026, allowing potential vendors seven days to submit proposals. The place of performance is specified as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, indicating the expected delivery location. The contracting office is listed as SUPPLIER OPER SUPPLIER SPT DIV under the Department of Defense, though no point of contact or detailed address information is provided. The solicitation is accessible via a public DIBBS portal link for further submission details.
Paint and Coating Manufacturing

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 541690
New
DIBBS
Sustainable and Prohibited Materials ComplianceThis contract requires strict adherence to federal procurement regulations by verifying the absence of prohibited substances such as hexavalent chromium and ensuring all materials and products used are sustainable and compliant with DFARS and FAR requirements. The subcontractor must implement verification processes to confirm material composition and sourcing, with a focus on environmental responsibility and regulatory alignment across the supply chain. Compliance is non-negotiable and will be subject to oversight as part of the Department of Defense’s broader commitment to sustainable defense practices. The solicitation targets suppliers performing work in New Cumberland, Pennsylvania, with a response deadline of July 24, 2026, and is classified under NAICS code 541690 for other scientific and technical consulting services. The contracting office is the Supplier Operations Support Division within the Department of Defense, and all submissions must meet the technical and regulatory criteria outlined in the federal acquisition framework. Participation is open to qualified subcontractors who can demonstrate proven capability in materials compliance, environmental stewardship, and documentation of sustainable sourcing practices.
Other Scientific and Technical Consulting Services

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance for Contractor Information SystemsThe contract requires full compliance with NIST SP 800-171 standards to safeguard controlled unclassified information within contractor information systems, ensuring robust cybersecurity controls are implemented and maintained. It also mandates adherence to DFARS 252.204-7012 and 252.240-7997, which establish reporting obligations for cyber incidents and the protection of CUI, particularly within systems supporting Department of Defense operations. All activities must align with these regulatory frameworks to meet federal security requirements and enable timely, accurate reporting of cybersecurity events. This subcontract is associated with the NAICS code 541512 and is performance-based at the location in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on July 16, 2026, and responses are due by July 24, 2026, providing a narrow window for submission. The contracting entity is the Supplier Operations Support Division under the Department of Defense, and the procurement is managed through the DIBBS platform, indicating it is part of a broader defense supply chain effort requiring strict cybersecurity discipline.
Computer Systems Design Services

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Safety Data ManagementThe contract requires identification of all hazardous materials present in the grommet or generated during its production process, with full compliance to OSHA and Department of Defense safety regulations. The supplier must provide accurate, up-to-date Safety Data Sheets for each identified substance, ensuring they meet all federal and military standards for content, format, and accessibility. This includes thorough documentation of chemical composition, health and physical hazards, handling procedures, emergency measures, and disposal guidelines to support safe use and transportation across DoD supply chains. Performance is tied to the facility located in New Cumberland, Pennsylvania, with a response deadline of July 24, 2026, and the contract is classified as a subcontract under NAICS code 541690 for other scientific and technical consulting services. The work supports the Department of Defense’s Supplier Operations Support Division and demands strict adherence to regulatory frameworks to ensure workplace safety and environmental compliance throughout the product lifecycle. All deliverables must be submitted in a timely manner and align with DoD’s operational and logistical requirements.
Other Scientific and Technical Consulting Services

POSTED

5 days ago

DEADLINE

in 3 days
View Details