Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SCREW, CAP, HEXAGON H

Active
SPE4A6-26-T-06RAFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a single hexagon cap screw, identified by NSA 5305-01-718-8827 and part number M1222RN16C372NCLN, manufactured in accordance with MIL-DTL-1222J Revision J dated August 12, 2000. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with compliance dictated by the revision in effect on the solicitation or award date depending on acquisition size. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging must comply with MIL-STD-2073-1E and DLA packaging standards, including marking per MIL-STD-129 with no special marking required. The item is to be delivered in one unit within five days of contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and shipment must be sent via the fastest traceable means, explicitly prohibiting parcel post. Delivery is directed to Electric Boat Corporation in N Stonington, CT, with a required delivery date of March 26, 2026, and the contract is issued under solicitation SPE4A6-26-T-06RA with a unit price of one dollar. Government use codes and shipping identifiers are included for internal tracking and logistics control.

General Info

One hexagon cap screw, MIL-DTL-1222J, delivered FOB origin to Electric Boat by March 26, 2026, for $1.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

25 NORWICH WESTERLY RD, N STONINGTON, CT, 06359, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-06RA.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
MICHAEL BLAIN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SCREW,CAP,HEXAGON H
SCREW,CAP,HEXAGON H
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-DTL-1222J REVISION NR J DTD 08/12/2000 PART PIECE NUMBER: M1222RN16C372NCLN
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017456907 0001 EA 1.000
SPE4A6-26-T-06RA
SECTION B
PR: 7017456907 PRLI: 0001 CONT’D
NSN/MATERIAL:5305017188827
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BL OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
Q90616
ELECTRIC BOAT CORPORATION
EAGLE PARK
25 NORWICH WESTERLY RD
N STONINGTON CT 06359
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
Q90616
ELECTRIC BOAT CORPORATION
EAGLE PARK
25 NORWICH WESTERLY RD
N STONINGTON CT 06359
US
M/F: (TCN) Q906166073F457
RDD:
PROJ: Z01 TP 1
SUPP ADD: N50438 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: 9B ADV: 2L FC: XP
Need Ship Date:00/00/0000 Original Required Delivery Date:03/26/2026
SPE4A6-26-T-06RA NSN/Part Number: 5305-01-718-8827 Quantity: 1 EA Purchase Request: 7017456907QTY: 1 Delivery: 5 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
BOLT, SHEARThe contract is for the procurement of 3 units of BOLT, SHEAR, identified by NSN 5306-01-585-3096, under solicitation SPE4A0-26-T-3891, with a required delivery within 5 days of award. The item is defined by non-government standards NAS1953THRUNAS1970 Revision 7 and NAS4002 Revision 12, and must be manufactured to the current revision of these standards; past revisions are acceptable only for previously produced items. All threads must comply with System 22 of FED-STD-H28/20 for dimensional inspection, excluding self-locking nuts and threads below specified diameters. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 under a zero-defect acceptance criterion unless otherwise directed, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. The item is classified as a commercial item, and inspection and acceptance occur at origin. Packaging must adhere to MIL-STD-2073-1E with specified preservation methods, wrapping, and unit containment, and marking must comply with MIL-STD-129, including no special marking codes. The item is designated as a critical application item and requires full compliance with DLA packaging requirements. Delivery is FOB destination to FPO AP 96306-2739, with a secondary shipping address in Japan. The contract includes strict quantity controls with 0% variance, and the original required delivery date is July 15, 2026.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
GASKETThe contract specifies the procurement of four gaskets identified by NSN 5330-01-595-3972 under solicitation SPE7L1-26-T-838U, with a response deadline of July 27, 2026, and a required delivery within 20 days of award. The item is classified as a commercial item and must be free of asbestos, with any alternative materials requiring approval under Clause L30 and Provision 4 conditions. Packaging must adhere to MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, and opaque bag to protect against ultraviolet degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. The gaskets must comply with MIL-STD-130N for identification marking of U.S. military property, and Government identification must be removed from non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation issue date for simplified acquisitions. The contract falls under NAICS code 332722, is managed by the Department of Defense’s Land Supply Chain, and performance is directed to FPO, ZIP 96692-7200, with Kristina Derry as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
BEARING, WASHER, THRUThe contract specifies the procurement of two units of a bearing and flat washer, identified by NSN 3120-01-645-8719 and part number LS1528, under solicitation SPE4A6-26-T-06SQ. Delivery is required within 20 days to Rose Barracks, Vilseck, Germany, with FOB origin terms and inspection and acceptance occurring at the destination. The items must be packaged in compliance with ASTM D3951 and marked per MIL-STD-129, with palletization adhering to DLA packaging requirements RP001, and all packaging must reflect the specified unit of issue and quantity per unit pack. Quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. All technical and quality requirements referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. The contract prohibits removal of government identification from non-accepted supplies and mandates physical identification of bare items per RQ017. The unit of issue is EA and the total price is $2.00, with no tolerance allowed for quantity variance. The items are destined for the 405th AFSB EUR at Rose Barracks under shipment RDD 777 and project code 9GU TP 2, with a required delivery date of June 8, 2026.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, SHOULDEREDThe contract is for the procurement of three shouldered washers, identified by NSN 5310-01-298-1033, under solicitation number SPE4A6-26-T-06RP, with a response deadline of July 23, 2026, and a required delivery within five days after order. Technical and quality requirements referenced in the solicitation are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless a later amendment supersedes it. The item is subject to specific DLA packaging standards and must comply with requirements for the removal of government identification from non-accepted supplies, physical marking of bare items, and export control of technical data governed by ITAR or EAR regulations. Disclosure of technical data to foreign persons, including foreign nationals within the United States or overseas, is strictly controlled and requires prior authorization from the Department of State or Commerce. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and formal approval from DLA. DFARS 252.225-7048 applies to all technical data under this contract. The contract is issued by the Defense Logistics Agency's ASC Commodities Division under NAICS code 332722, with Lisa Harvie listed as the primary point of contact for inquiries.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEADThe item is a metric hexagon cap screw specified as M10 x 1.5 x 50 mm, manufactured from low carbon steel per ASTM F568M Grade 10.9 and coated with zinc plating per ASTM B633 Type II, SC 1. It is defined by commercial standards, specifically ASME B18.2.3.1M, which has been superseded by ISO 4014 for partially threaded bolts; replacements must now reference ISO 4014 and may be sourced via AMC/AMSC code 1/G. The screw is classified as a commercial item and must be manufactured to the current revision of the governing part standard at the time of production. Although past revisions were acceptable, all items produced after the solicitation date must comply with the latest industry standard. Packaging and marking must adhere to DLA requirements including physical identification per RQ017 and removal of government identifiers from non-accepted supplies per RQ011. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs. The National Stock Number is 5305-01-418-1728 with a quantity of 872 units required under solicitation SPE4A6-26-T-06SR, issued by the Department of Defense, ASC Commodities Division. Delivery is due in 149 days after order award and will be performed at Barstow, CA 92311-5014. The solicitation was posted July 15, 2026, with responses due by July 23, 2026. Item Unique Identification is not required per the service customer's request, and DFARS 252.211-7003(c)(1)(i) applies. The procurement is fully competitive and governed by military and federal standards. Point of contact is Ashley JONES-TURNER at DLA, with email and phone provided for inquiries.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details