Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SCREW, CAP, HEXAGON H

Active
SPE4A6-26-T-16PDFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 129 hexagon head cap screws under part number 5305-01-509-8959. The contract requires delivery within 169 days after order and is subject to specific technical and quality requirements maintained in the DLA master list. Compliance with CMMC Level 2 certification and strict adherence to packaging, source approval, and physical identification standards are mandatory for the supplier. The contract contains significant security and legal restrictions, including the handling of covered defense information and strict export controls under ITAR and EAR regulations. Access to technical data is limited to contractors with approved US/Canada Joint Certification Program certification and completed export-control training. All activities must comply with DFARS 252.225-7048, and the procurement is categorized under NAICS code 332722.

General Info

DoD procurement of 129 hexagon head cap screws requiring CMMC Level 2 certification.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-16PD.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
ContactsNo contacts available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
ContactsNo contact information available

Full Description

Show more
SCREW,CAP,HEXAGON H
SCREW,CAP,HEXAGON HEAD
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5305-01-509-8959 Quantity: 129 EA Purchase Request: 7017837725QTY: 129 Delivery: 169 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
FASTENER TAPE, HOOK
Solicitation # SPE4A6-26-T-16RB
This contract is a solicitation from the Department of Defense, specifically the ASC Commodities Division, for the procurement of 12 units of hook fastener tape under part number 5325-01-609-1508. The delivery requirement is set for 202 days after the order is placed. The procurement is governed by specific technical and quality requirements, including DLA packaging standards, physical identification marking, and the removal of government identification from non-accepted supplies. Compliance requires adherence to Cybersecurity Maturity Model Certification Level 2 and strict export control regulations under ITAR and EAR, meaning technical data cannot be exported or disclosed to foreign nationals without prior authorization. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with a focus on zero non-conformance for acceptance. The place of performance is located in New Cumberland, Pennsylvania.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-16QJ
This contract is for the procurement of one machine screw, identified by NSN 5305017018101 and part number 8543862-ITEM 34. The item must be manufactured according to basic drawing 53711 8543862 Revision A. Delivery is required within 20 days after the order, with a required delivery date of July 28, 2026. The shipment is FOB Origin and will be delivered to the NAVSEALOGCEN Warehouse Operations in Mechanicsburg, Pennsylvania, using traceable shipping methods. The agreement incorporates several technical and quality requirements, including DLA packaging standards, covered defense information protocols, and specific marking and identification guidelines. Quality assurance is governed by certificate of conformance procedures and strict sampling methods based on MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and palletization must adhere to DLA procurement requirements.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, ROUND
Solicitation # SPE4A6-26-T-16SK
This contract is for the procurement of six plain round nuts, identified by NSN 5310-00-084-0602 and part number 70-1932. The item is classified as a commercial critical application item and must adhere to specific technical data packages and quality requirements, including those found in the DLA Master List. Sampling and inspection will be conducted at the destination according to MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan unless otherwise specified. The delivery is set for 214 days after order, with a required delivery date of March 24, 2027, shipped FOB Origin to the DLA Distribution Depot Hill in Utah. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. The procurement includes specific quality conformance and marking requirements, and a certificate of conformance is authorized unless otherwise instructed.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-16NH
This solicitation is for the procurement of one retaining ring, identified by NSN 5325-01-655-9258 and part number 06885107 from Sid Tool Co Inc. The contract requires strict adherence to the current revision of the source control drawing, and any offerors not listed as approved sources must obtain OEM approval and submit the necessary technical data or certification to the DLA. Technical and quality requirements are governed by the DLA Master List, and the removal of government identification from non-accepted supplies is mandatory. Delivery is required within 10 days, with the shipping point set as origin and inspection and acceptance occurring at the destination in Indianapolis, Indiana. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. The shipment must be sent via the fastest traceable means, excluding parcel post, to the specified ARNG CSMS 1 address. The original required delivery date is set for August 7, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-26-T-16PN
This solicitation, issued by the Department of Defense ASC Commodities Division under number SPE4A6-26-T-16PN, is for the procurement of 252 hexagon head cap screws. The items are identified by NSN 5305-01-146-1715 and correspond to part numbers 5EX44 from Oshkosh Corp and 62158 from Eaton Corp. The delivery requirement is set for 126 days after the order is placed. The contract adheres to specific DLA packaging and quality requirements as outlined in the DLA Master List, specifically referencing RP001 and RA001. Additionally, requirement RQ011 mandates the removal of government identification from any non-accepted supplies. The solicitation was posted on August 13, 2026, with a response deadline of August 21, 2026, and falls under NAICS code 332722.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-16NJ
This contract is for the procurement of 10 hexagon cap screws, identified as a commercial off the shelf critical application item with NSN 5305015544744 and McMaster-Carr part number 95327A829. The order is managed under solicitation SPE4A6-26-T-16NJ by the Department of Defense ASC Commodities Division. Delivery is required within 10 days, with a required delivery date of August 7, 2026, shipping FOB Origin to a facility in Indianapolis, Indiana. The supplier must adhere to specific DLA technical and quality requirements, including RP001 for packaging and RQ011 for the removal of government identification from non-accepted supplies. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling. The contract specifies a zero percent quantity variance and designates both the inspection and acceptance points at the destination.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-16RA
This contract is for the procurement of a single pin-rivet, identified by NSN 5320-01-538-3123, under solicitation number SPE4A6-26-T-16RA. The requirement specifies adherence to technical and quality standards set by the DLA Master List, including specific packaging, marking, and identification requirements. The item must be manufactured according to reference drawings and technical data packages, with potential requirements for casting or forging that may necessitate specialized tooling. The delivery is set for 20 days after receipt of order, with the destination being the Royal Jordanian Air Force at Prince Hassan Air Base in Safawi, Jordan. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, and the contract stipulates a zero-percent quantity variance. Item Unique Identification is not required for this specific order.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HE
Solicitation # SPE4A6-26-T-16PA
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 74 socket head cap screws under NSN 5305-01-484-0159. The contract is designated as a Total Small Business Set-Aside under NAICS code 332722, with a required delivery timeframe of 169 days after receipt of order. Performance is to be carried out in New Cumberland, Pennsylvania. The agreement is subject to strict technical and quality requirements as defined by the DLA Master List, including specific packaging standards. Notably, the contract involves export-controlled technical data governed by ITAR and EAR regulations. Access to this data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed DLA export-control training.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HE
Solicitation # SPE4A6-26-T-16NE
This contract is for the procurement of 100 units of socket head cap screws, identified by NSN 5305015560483 and part number 91251A346. The order is issued by the Department of Defense ASC Commodities Division under solicitation SPE4A6-26-T-16NE. Delivery is required within 20 days, with the original required delivery date set for August 7, 2026. The items are to be delivered FOB Origin, with both inspection and acceptance occurring at the destination in Newport, Rhode Island. The supplier must adhere to strict technical and quality requirements, including physical identification and bare item marking. Sampling must follow MIL-STD-1916 or ASQ H1331 standards, ensuring zero non-conformances for acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. Shipping must be conducted via traceable means to the specified Naval Station Newport addresses, and parcel post is strictly prohibited.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SETSCREW
Solicitation # SPE4A6-26-T-16RC
This contract is a solicitation for a setscrew, identified by NSN 5305014936545 and associated with ITW Food Equipment Group LLC part numbers PL-21170 and SC-47-17. The requirement is for one unit to be delivered to Joint Base Lewis McChord in Washington. The delivery timeline is set for 10 days after order, with an original required delivery date of August 6, 2026. The item is designated as a critical application item and must adhere to strict quality and technical requirements, including specific sampling methods under MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and the use of mercury or mercury-containing compounds is prohibited in the hardware, preservation, and packaging. Shipping must be conducted via the fastest traceable means, excluding parcel post.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BUMPER
Solicitation # SPE7L1-26-T-967M
This contract is a solicitation for the procurement of three bumpers under solicitation number SPE7L1-26-T-967M, issued by the Department of Defense Land Supply Chain. The items are identified by NSN 5340-01-581-1605 and are associated with part numbers from Advanced Cooling Technologies Inc and Emerson Electric Co. The required delivery date is August 11, 2026, with a delivery timeframe of 10 days after the order is received. The shipment is destined for Fort Carson, Colorado, and must be delivered FOB Origin. Packaging must adhere to DLA packaging requirements and MIL-STD-129 labeling standards, with specific instructions to use the fastest traceable shipping means and avoid parcel post. The contract emphasizes compliance with the DLA Master List of Technical and Quality Requirements and specifies that any government identification must be removed from non-accepted supplies.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-26-T-16PL
This contract is for the procurement of 286 hexagon head cap screws, identified by NSN 5305-01-157-1990 and part number MS51109-74. The items are designated as critical application items and must adhere to NASM51109 Revision 2. Delivery is required within 213 days after order, with a need ship date of March 23, 2027. The shipment is FOB Origin and will be delivered to DLA Distribution San Joaquin in Tracy, California. The supplier must comply with several technical and quality requirements, including DLA packaging standards, MIL-STD-129 marking, and ASTM D3951 packaging. Strict prohibitions are in place regarding the intentional addition of mercury or mercury-containing compounds. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541620
New
DIBBS
Hazardous Materials Handling and Certification
Environmental Consulting Services

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541618
New
DIBBS
Airworthiness Documentation and DART Database Upload
Other Management Consulting Services

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 561910
New
DIBBS
Packaging and Compliance for DLA Shipment
Packaging and Labeling Services

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332721
New
DIBBS
Manufacture of Critical Turnlock Fasteners (Stud Type)
Precision Turned Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541370
New
DIBBS
Surveying and Site Layout Services
Surveying and Mapping (except Geophysical) Services

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 237310
New
DIBBS
Roadway Paving and Asphalt Services
Highway, Street, and Bridge Construction

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238110
New
DIBBS
Concrete Forming and Placement
Poured Concrete Foundation and Structure Contractors

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238220
New
DIBBS
Plumbing and Piping Systems Installation
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238210
New
DIBBS
Electrical Installation and Wiring Services
Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AI
Solicitation # SPE4A6-26-T-16SB
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of three structural aluminum plates under NSN 1560-01-723-7586. The contract requires delivery within 198 days after receipt of order and is categorized under NAICS code 336413. Performance is to take place in New Cumberland, Pennsylvania. The agreement is subject to strict technical and quality requirements as defined by the DLA Master List, including specific packaging standards. Notably, the item contains technical data subject to ITAR and EAR export controls, meaning access is limited to contractors with approved US/Canada Joint Certification Program certification and completed DOD export-control training.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details