Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SCREW, CAP, HEXAGON H

Active
SPE4A6-26-T-06ASFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 74 units of a hexagon cap screw, identified by NSN 5305-01-611-7286, under solicitation SPE4A6-26-T-06AS. Delivery is required within 171 days to the DLA Distribution San Jacinto facility in Tracy, California, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the destination point, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. The item is not subject to shelf life restrictions and must be free of intentional mercury or mercury compounds, except for specified exceptions such as batteries or functional instruments governed by NAVSEA standards. Packaging and preservation procedures must also avoid mercury exposure as per IP056. The contract incorporates technical and quality requirements from the DLA Master List, with sampling governed by MIL-STD-1916 or comparable zero-based plans, and critical attributes assigned verification levels or AQLs as defined. Measuring and test equipment must meet RT001 standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers under RQ001. Unit of issue is each (EA), priced at $74.00 per unit, totaling $5,476. Item Unique Identification is waived per DFARS 252.211-7003(c)(1)(i). The required delivery date is February 17, 2027, with a needed ship date of January 10, 2027.

General Info

74 hexagon cap screws, NSN 5305-01-611-7286, $74 each, deliver to Tracy CA by Feb 17, 2027, FOB origin, no mercury, MIL-STD compliance.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-06AS.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
KELA GRIFFIN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SCREW,CAP,HEXAGON H
SCREW,CAP,HEXAGON HEAD
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
RT001: MEASURING AND TEST EQUIPMENT
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
SPE4A6-26-T-06AS
SECTION B
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-DTL-1222J REVISION NR J DTD 08/12/2000 PART PIECE NUMBER: M1222RN12C252NCNN
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017486505 0001 EA 74.000
NSN/MATERIAL:5305016117286
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
SPE4A6-26-T-06AS
SECTION B
PR: 7017486505 PRLI: 0001 CONT’D
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:01/10/2027 Original Required Delivery Date:02/17/2027
SPE4A6-26-T-06AS NSN/Part Number: 5305-01-611-7286 Quantity: 74 EA Purchase Request: 7017486505QTY: 74 Delivery: 171 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
BOLT, SHEARThis contract specifies the procurement of 200 shear bolts, part number MS21250H06010, under the NSN 5306009291690, for delivery to DLA Distribution in Corpus Christi, Texas, with a required delivery date of September 18, 2027, and a lead time of 171 days. The item is governed by technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking compliance with MIL-STD-129, with no special marking required. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances accepted unless otherwise stated; attributes are assigned verification levels or AQLs as defined, and manufacturers may choose attribute or variable inspection methods. The bolt is designated a critical application item and must strictly comply with NASM21250 Revision 2 and NASM8831 Revision 5 specifications. Mercury and mercury-containing compounds are prohibited in the item, packaging, preservation, and marking, except for specified functional uses such as in batteries, fluorescent lights, sensors, or weapon systems, with portable lamps and instruments requiring shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. Delivery is FOB origin, inspection and acceptance occur at destination, and no quantity variance is permitted. Packaging and palletization adhere to DLA-specific procedures, and transportation details are governed by DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE4A6-26-T-05VT, with a total price of $200.00 per unit, and is managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCKThis contract specifies the procurement of one locking washer with NSN 5310016197723, sourced under solicitation SPE7M0-26-T-007R, with a required delivery within five days of award, delivered FOB origin. The item is designated as a critical application component and must comply with Curtiss-Wright Electro-Mechanical Corp part numbers 6053274 and 6053343-005. Strict packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129 are mandated, with no special marking codes required. The shipment must avoid parcel post and be sent via the fastest traceable means to the Norfolk Naval Shipyard in Portsmouth, VA. The use of Class I ozone-depleting chemicals is explicitly prohibited, superseding any conflicting specification requirements, and any substitute chemicals require prior approval. Packaging must adhere to DLA’s proprietary packaging requirements, and the unit of issue is the individual piece, with zero tolerance for quantity variance. The delivery deadline is July 14, 2026, and the contract directs compliance with the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issuance date. All deliveries must be accompanied by the designated freight shipping address and government-specific identifiers for tracking and accountability.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCEThis contract pertains to the procurement of 5,865 close-tolerance screws identified by NSN 5305-01-215-7283 and part number NAS1580V3R11, classified as a commercial item and designated as a critical application component. The screws must be manufactured to stringent dimensional standards, with all Class 3A and 3B threads inspected per System 22 of FED-STD-H28/20, excluding self-locking nuts and threads below specified minimum diameters. Manufacturing may require casting or forging, and the government may not possess the necessary tooling, necessitating vendors to submit a Casting and Forging Assistance Request if needed. Technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements govern the specification, with specific provisions for packaging, marking, and removal of government identification from non-accepted items. Sampling must comply with MIL-STD-1916 or ASQ Z1.4, with verification levels of VII, IV, and II assigned to critical, major, and minor attributes respectively, and zero non-conformances required in the sample lot unless otherwise stated. The product must be packaged in accordance with ASTM D3951 and labeled per MIL-STD-129, with palletization following DLA’s RP001 packaging requirements. All packaging must reflect the specified Unit of Issue and Quantity per Unit Pack, and the items are to be delivered FOB origin to Tinker AFB, Oklahoma, with a required delivery date of February 18, 2027, and a need ship date of May 5, 2026. No quantity variance is permitted—0% plus or minus. Inspection and acceptance occur at the destination, and transportation logistics must adhere to DLAD Proc Notes C19 and C20. The contract is a total small business set-aside under NAICS code 332722, with a response deadline of July 22, 2026, and is administered by the Department of Defense’s ASC Commodities Division. The contract enforces strict compliance with technical data package revisions and quality assurance provisions tied to the referenced drawings and standards.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAININGThe contract pertains to the procurement of a single retaining ring, identified by NSN 5325-01-661-7526 and part number V 3859, with a required delivery of five days from the origin under FOB shipping terms. The quantity is exactly one unit with no variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping, and cushioning details, while marking follows MIL-STD-129 with no special markings. The item must be shipped via the fastest traceable means, explicitly excluding parcel post. Delivery is directed to the Distribution Management Office at MCLB Albany, Georgia, and the contract references DLA’s master technical and quality requirements, as well as packaging guidelines. Documentation requirements for source approval and handling of covered defense information are applicable, and the item is subject to government-specific codes and identifiers for tracking and accountability. The solicitation number is SPE4A6-26-T-06GA, issued by the Defense Logistics Agency’s Commodity Division, with a required delivery date of July 9, 2026, and no set-aside type specified.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
ROD, CONTINUOUS THREThe contract pertains to the procurement of a continuous threaded rod, identified by NSN 5306-01-624-0183 and part number H7254534-1, with a quantity of 185 units delivered FOB origin under solicitation SPE4A1-26-T-2444. Delivery is required within 171 days, with an original delivery date of December 29, 2026, and a needed ship date of January 10, 2027. The item must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129, using preservation methods specified under QUP 001, with no special marking required. Packaging and preservation materials must be free of mercury or mercury-containing compounds, in accordance with DLA’s prohibition under IP056, with exceptions limited only to functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or reagents specified by NAVSEA, which must also meet additional containment standards per NAVSEA 5100-003D. The delivery destination is the DLA Distribution DDSP New Cumberland facility in New Cumberland, Pennsylvania, with all shipments governed by DLA’s transportation protocols C19 and C20. The contract enforces zero variance in quantity, with inspection and acceptance occurring at destination, and references the DLA Master List of Technical and Quality Requirements for all technical and quality specifications tied to R or I identifiers. Unit of issue is each, with a unit price of $185.00, totaling $34,225.00, and the procurement falls under NAICS code 332722.
AVIATION SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details