This Solicitation opportunity from Department Of Defense was posted on July 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
SCREW, CAP, HEXAGON HEAD
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The item is a metric hexagon cap screw specified as M10 x 1.5 x 50 mm, manufactured from low carbon steel per ASTM F568M Grade 10.9 and coated with zinc plating per ASTM B633 Type II, SC 1. It is defined by commercial standards, specifically ASME B18.2.3.1M, which has been superseded by ISO 4014 for partially threaded bolts; replacements must now reference ISO 4014 and may be sourced via AMC/AMSC code 1/G. The screw is classified as a commercial item and must be manufactured to the current revision of the governing part standard at the time of production. Although past revisions were acceptable, all items produced after the solicitation date must comply with the latest industry standard. Packaging and marking must adhere to DLA requirements including physical identification per RQ017 and removal of government identifiers from non-accepted supplies per RQ011. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs. The National Stock Number is 5305-01-418-1728 with a quantity of 872 units required under solicitation SPE4A6-26-T-06SR, issued by the Department of Defense, ASC Commodities Division. Delivery is due in 149 days after order award and will be performed at Barstow, CA 92311-5014. The solicitation was posted July 15, 2026, with responses due by July 23, 2026. Item Unique Identification is not required per the service customer's request, and DFARS 252.211-7003(c)(1)(i) applies. The procurement is fully competitive and governed by military and federal standards. Point of contact is Ashley JONES-TURNER at DLA, with email and phone provided for inquiries.
General Info
Agency
NAICS
Place of Performance
REC OFFICER 442-295-4148, BARSTOW, CA, 92311-5014, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
SCREW,CAP,HEXAGON HEAD
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
METRIC ASME B18.2.3.1M M10 X 1.5 X 50 ASTM F 568M, GRADE 10.9 LOW CARBON
STEEL ASTM B 633, TYPE II, SC 1; ZINC PLATED
ASME B18.2.3.1M has been replaced by an international ISO standard. AES07M10Z050CG9A81 is currently a standardized ASME B18.24. Hexagon M10x50 mm hex cap screw. When sourcing replacement part that previously specified AES07M10Z050CG9A81, you should now refer to ISO 4014 (for partially threaded bolts) for a replacement and can source via AMC/AMSC of 1/G.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL OF A TYPE')
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
SPE4A6-26-T-06SR
SECTION B
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY THIS NSN IS PROCURED AS FULLY COMPETITIVE IN ACCORDANCE WITH A MILITARY / FEDERAL SPECIFICATION/STANDARD. SEE NSN/Part Number: 5305-01-418-1728 Quantity: 872 EA Purchase Request: 7017272538QTY: 872 Delivery: 149 days ADO
More opportunities from Department Of Defense → ASC COMMODITIES DIVISION
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS