Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SCREW, CAP, HEXAGON HEAD

Active
SPE4A6-26-T-53F2Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of eight hexagon head cap screws identified by NSN 5305-01-377-3717, with a delivery requirement of 171 days after award. The technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on either the solicitation issue date or award date depending on the acquisition size. Packaging must comply with DLA requirements, and all items must be marked in accordance with MIL-STD-130N for U.S. military property identification. Non-accepted supplies must have government identification removed as directed, and each screw must be physically marked according to the bare item marking standard. Sampling and inspection follow MIL-STD-1916 or an equivalent zero-based plan, with acceptance criteria requiring zero non-conformances unless otherwise specified, and attributes are classified with stringent verification levels or AQLs. The use of mercury or mercury-containing compounds is strictly prohibited unless explicitly exempted for specific functional components, and any permitted mercury-containing items must include shockproof design and secondary containment as per NAVSEA guidelines. The solicitation number is SPE4A6-26-T-53F2, issued on August 5, 2026, with responses due by August 10, 2026, under the NAICS code 332112, and performance is designated for Tracy, CA, with Myonka Boyd listed as the primary point of contact.

General Info

Procure eight NSN 5305-01-377-3717 cap screws, deliver in 171 days, comply with MIL-STD-130N and DLA standards, zero defects allowed, no mercury.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332112 - Nonferrous ForgingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-53F2 DLA Aviation May 13 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
MYONKA BOYD
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SCREW,CAP,HEXAGON HEAD
SCREW, CAP, HEXAGON HEAD
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
ANDERSON GREENWOOD LP
STRAFFORD TX.
IDENTIFY TO
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SPE4A6-26-T-53F2
SECTION B
ADEQUATE DATA FOR NSN/Part Number: 5305-01-377-3717 Quantity: 8 EA Purchase Request: 7016753439QTY: 8 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332112
New
DIBBS
Precision Machined Mounting Plate SupplyThe contract requires the manufacture and delivery of 30 precision-machined mounting plates in full compliance with military specifications covering material composition, dimensional tolerances, and mandatory marking requirements. All units must meet strict quality and performance standards dictated by defense industry norms to ensure interoperability and reliability in military vehicle systems. The work is classified as a subcontract under NAICS code 332112 and is being procured by the Department of Defense through its Land Supplier Operations Vehicle Support division. Proposals must be submitted by the deadline of August 17, 2026, with the solicitation originally posted on August 5, 2026. The place of performance and point of contact details are not specified, but all deliveries and compliance certifications are expected to align with federal defense contracting protocols and traceability requirements.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
Precision Machining of Centrifugal Pump ImpellerThe contract calls for the manufacture of two precision centrifugal pump impellers designed for critical applications requiring strict compliance with military or industrial specifications. This subcontract is part of the Department of Defense’s Maritime Supply Chain initiative and is classified under NAICS code 332112, indicating it falls within the precision machining and manufacturing sector for pumps and pumping equipment. The impellers must meet exacting quality and performance standards to ensure reliable operation in demanding environments, where failure is not an option. All work must be completed to stringent technical requirements without deviation, emphasizing dimensional accuracy, material integrity, and surface finish. The solicitation was posted on August 5, 2026, with a firm deadline for responses on August 12, 2026, leaving a limited window for qualified subcontractors to submit proposals. The place of performance and point of contact details are not specified, suggesting the contractor may have flexibility in location but must still meet all delivery and certification benchmarks. The contract is accessible through the DIBBS platform, and interested parties must ensure full alignment with the technical and compliance demands outlined in the full RFQ to be considered for award. There is no set-aside designation, meaning any eligible supplier may bid regardless of business size or ownership characteristics.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332112
New
DIBBS
Pressure Switch Supply (NSN 5930-00-192-4507)The contract solicits the supply of five pressure switches identified by NSN 5930-00-192-4507, distributed across two contract line items, with delivery required to Fort Eustis, Virginia, under the procurement authority of the Department of Defense’s Electrical Devices Division. All items must strictly adhere to DLA technical standards, and contractors are obligated to submit a comprehensive data package if proposing any alternate parts in lieu of the specified NSN. The solicitation, posted on August 5, 2026, closes for responses on August 17, 2026, and is classified as a subcontract under NAICS code 332112, indicating manufacturing of electrical equipment and wiring supplies. No set-aside designation or point of contact information is provided, and the procurement is conducted through the DIBBS platform with the reference number SPE7M826T5710.
ELECTRICAL DEVICES DIV

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-13BN
The contract pertains to the procurement of 814 units of a machine bolt identified by NSN 5306-00-462-4317, classified as a commercial item and governed by established military or consensus non-government standards. The hardware must be manufactured to the current revision of the defining standard, with prior revisions still acceptable if they were current at the time of manufacture. Item Unique Identification is explicitly not required per the service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Technical and quality requirements referenced by R or I numbers are incorporated by reference from the DLA Master List, and packaging must comply with DLA specifications. Inspection and acceptance occur at the origin, and government identification must be removed from non-accepted supplies. Measuring and test equipment standards are applicable, and physical identification of the bare item is required. The solicitation, issued under number SPE4A6-26-T-13BN, was posted on August 5, 2026, with responses due by August 13, 2026, and delivery is required within 156 days after order. The acquisition is fully competitive, under NAICS code 332112, managed by the Department of Defense’s ASC Commodities Division, with performance to be delivered to Tracy, California, 95304-5000. Primary point of contact is Priscilla Holmes.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
CHANNEL, STRUCTURAL
Solicitation # SPE8E4-26-T-1982
The contract specifies the procurement of structural aluminum channels made from 6061 aluminum alloy in T6 or T6511 temper, with a width of 4.0 inches, height of 1.647 inches, thickness of 0.180 inches, and a weight of 2.210 pounds per foot. Lengths must be between 20 and 30 feet and delivered in whole-foot increments only. The profile must conform to specific die numbers from approved manufacturers including Alcoa, Tiernay, Kaiser, and Reynolds. Material must meet stringent quality standards defined by ASTM B666/B666M-20, SAE AMS-QQ-A-200/8A, and SAE AMS-QQ-A-200C, and suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible. Every shipment requires a Certificate of Quality Compliance, along with continuous identification markings on each unit that include the DLA contract number, NSN, specification revision, alloy, temper, die number, manufacturer, heat and lot numbers, and dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling using non-contaminating fluids. Packaging must follow MIL-STD-2073-1E and MIL-STD-129 guidelines with preservation per ASTM B660 and palletization per DLA requirements. A minimum of 50 feet is required, with a 10% variance allowed, and delivery is FOB origin with inspection and acceptance at destination. The product is classified as a critical application item, and failure to comply with any requirement, particularly regarding supplier qualification or marking, may result in rejection or criminal penalties. The delivery deadline is 83 days from award, with an original required delivery date of September 9, 2026, and the final ship date set for November 9, 2026, to DLA District San Joaquin in Tracy, California.
DLA DIST SAN JOAQUIN

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-13NJ
The contract specifies the procurement of 209 machine bolts identified by NSN 5306-01-377-1546 and part number 12418102, manufactured to the current revision of a recognized military or consensus non-government part standard, with past revisions also acceptable if they were current at the time of manufacture. The item is classified as a commercial item and is designated as a critical application component requiring strict compliance with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes must be verified at designated levels with AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor. Configuration control, engineering change proposals, and variance requests are governed by specific DLA protocols including RQ002 and RQ017 for physical marking and removal of government identification from non-accepted items. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 respectively, with no special marking required and palletization following DLA packaging standards. Delivery is FOB origin with inspection and acceptance occurring at destination, and the required delivery date is August 5, 2026, with a 182-day lead time. The item must be shipped to the DLA Distribution Center in New Cumberland, PA, and the contractor must comply with all applicable Defense Logistics Agency procedures, including proper unit of issue and transportation guidelines. Certification of conformance is authorized unless overridden by a quality assurance letter of instruction.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
BEAM, STRUCTURAL
Solicitation # SPE8E4-26-T-2010
The contract specifies the procurement of structural beams made from aluminum alloy 7075/T-6511 with dimensions of 2.250 inches in height, 3.50 inches in width, and 0.156 inches in thickness, supplied in whole-foot lengths between 10 and 12 feet, weighing approximately 1.050 pounds per foot. All material must comply with technical and quality standards referenced in the DLA Master List, including certification requirements such as a Certificate of Quality Compliance (Mill-Material Certification) with each shipment, and mandatory continuous markings on every unit that include the DLA contract number, NSN, specification revision, alloy and temper, manufacturer’s heat and lot number, and dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contaminating the material, and adhesive labels are required for smaller bars and tubes under 0.250 inches nominal OD. Packaging must follow MIL-STD-2073-1E and marking must conform to MIL-STD-129, with shipment labels including both units of measure if applicable. The material must be sourced exclusively from suppliers listed on the Qualified Suppliers List for Distributors (QSLD), and any deviation from this requirement constitutes an unauthorized substitution with potential criminal and civil penalties. The contract includes two line items totaling 17,160 feet—80 feet for delivery to Cherry Point, North Carolina, and 17,080 feet to Jacksonville, Florida—with a 42-day delivery window, a 10% quantity variance allowance, and FOB origin terms. Inspection and acceptance occur at the destination, and metal certification documentation must be submitted to the DLA Troop Support Contracting Officer. The solicitation is a HUBZone set-aside under NAICS code 332112, with response deadlines and technical data package references aligned to standards including SAE AMS-QQ-A-200/11A, ASTM B666/B666M-20, and NAS344.
CHERRY POINT PHANTOM RD BLDG

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
STRUCTURAL SECTION,
Solicitation # SPE8E4-26-T-1962
The contract specifies the procurement of 31 units of a structural section made from 6061 aluminum alloy in T4 temper, extruded to a length of 12 feet with part number BAC1520-606 and national stock number 9540-01-482-2307. Each part must be marked per MIL-STD-130 with the NSN, part number, current design authority code 98748, actual manufacturer’s cage code, date of manufacture, and the phrase “FOR MILITARY USE ONLY,” explicitly prohibiting the use of Boeing’s original cage code. Packaging must comply with DLA’s RP001 requirements, and all technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. The item is subject to export control under ITAR or EAR, restricting technical data disclosure to foreign persons anywhere, including U.S. subsidiaries and foreign nationals in the U.S., with DFARS 252.225-7048 enforcing compliance. Access to controlled data is limited to DLA contractors who hold JCP certification, have completed required DLA training and questionnaire, and have received formal approval. Delivery is due 167 days after award under solicitation SPE8E4-26-T-1962, issued by the Department of Defense through Depot Oklahoma at Tinker AFB, with responses due by August 17, 2026, and primary point of contact Pamela Duffey.
DEPOT OKLAHOMA

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-13CA
The contract is for the procurement of 230 machine screws with the NSN/Part Number 5305-00-551-6444, issued under solicitation SPE4A6-26-T-13CA by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 80 days after delivery order, and responses must be submitted by August 13, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date or award date depending on the acquisition size. The item is subject to several DLA-specific requirements including packaging standards, removal of government identification from non-accepted supplies, physical marking of bare items, and strict export controls. Technical data associated with this item is classified under ITAR or EAR regulations, prohibiting unauthorized export or disclosure to foreign persons, including foreign nationals within the U.S. Contractors must possess a valid US/Canada Joint Certification Program certification, have completed mandatory DLA export control training and questionnaire, and have received explicit approval from DLA to access the controlled data. The place of performance is Tinker Air Force Base, Oklahoma, and the primary point of contact is Nyjel Knowlin, reachable via email at nyjel.knowlin@dla.mil.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-13KL
The contract pertains to the procurement of hexagon head cap screws, identified by NSN 5305013308496 and part number 12414475-113, under solicitation SPE4A6-26-T-13KL, with a total quantity of 87 packaging units, each containing 50 screws, effective March 1, 2023. The item is designated as a critical application item and must conform to Technical Data Package Revision A Generation 3, aligned with multiple reference drawings dated between 2011 and 2026. All supplies must comply with DLA packaging requirements and the DLA Master List of Technical and Quality Requirements, incorporated by reference. Sampling procedures must adhere to MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. Unit of issue is PG and delivery is FOB origin within 37 days. Inspection and acceptance occur at destination, with no variance allowed in quantity. Packaging must follow MIL-STD-2073-1E and marking must comply with MIL-STD-129, with no special marking required. Palletization must meet DLA packaging standards. The contract is issued by the Department of Defense, ASC Commodities Division, with performance to be conducted in New Cumberland, PA.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-10DR
The contract pertains to the procurement of 231 machine bolts identified by NSN 5306-00-785-1102 and part number 9411631, supplied to meet technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The items are designated as critical application components for General Motors Corp and Rolls-Royce Solutions America Inc, requiring strict adherence to MIL-STD-1916 or ASQ H1331 sampling protocols with zero non-conformances permitted unless otherwise stated. Attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking required, and palletization must conform to DLA packaging requirements. The items must be delivered FOB origin within 164 days, with no variance allowed in quantity, inspected and accepted at destination. The delivery address is DLA Distribution Depot Hill at Hill AFB, Utah, with freight shipping instructions referencing DLAD procedural notes C19 and C20. The original required delivery date is January 27, 2027, with a need ship date of January 17, 2027. The contract, issued under solicitation SPE4A6-26-T-10DR, was posted on July 28, 2026, with responses due by August 5, 2026. It falls under NAICS code 332112 and is managed by the Department of Defense’s ASC Commodities Division. The unit of issue is each, with a total price of $231.00 at $1.00 per unit. Technical compliance, packaging, marking, and delivery protocols are binding and must align with all referenced DLA and military standards without exception.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332112
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2015
This contract specifies the procurement of extruded aluminum alloy bars made from 6061 in the T6511 temper condition, with a diameter of 1.500 inches and a total length of 12 feet per bar, weighing approximately 2.080 pounds per foot. The material must meet stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements and must comply with multiple specifications including SAE AMS-QQ-A-200/8A, ASTM B666/B666M-20, ASTM B660-23, and MIL-STD-129R. A Certificate of Quality Compliance, including mill material certification, is mandatory for every shipment and must be submitted to the DLA Troop Support Contracting Officer. Each bar must be continuously marked with the DLA contract order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions using approved methods such as stenciling or stamping, ensuring legibility and durability without contamination. All bars must be supplied in whole-foot increments within the specified length tolerance. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD), and only approved QSLD distributors are eligible for award unless a formal deviation is declared. Non-compliance with the QSLD requirement constitutes an unauthorized substitution and may result in criminal penalties. Packaging and preservation must adhere to MIL-STD-2073-1E and ASTM B660, with labeling fully conforming to MIL-STD-129, including special marking code ZZ for preservation and marking. Palletization follows DLA packaging requirements. The contract specifies delivery of 298 feet to Tinker AFB, Oklahoma, under FOB origin terms with a 10% variance allowance, inspection and acceptance at destination, and an original delivery deadline of January 9, 2027, with a required ship date of January 18, 2027. This item is designated as a critical application item, and all documentation, including CDRL-METALSCERT, must be provided as required under the contract data requirements list.
DEPOT OKLAHOMA

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 561730
New
DIBBS
Erosion Control and Landscaping
Landscaping Services

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 561990
New
DIBBS
Traffic Control and Signage
All Other Support Services

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332312
New
DIBBS
Steel Fabrication and Erection
Fabricated Structural Metal Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541370
New
DIBBS
Surveying and Layout Services
Surveying and Mapping (except Geophysical) Services

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541620
New
DIBBS
Environmental Site Assessment and Remediation
Environmental Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 237310
New
DIBBS
Asphalt Paving and Site Surfacing
Highway, Street, and Bridge Construction

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 238110
New
DIBBS
Concrete Forming and Placement
Poured Concrete Foundation and Structure Contractors

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 238220
New
DIBBS
Plumbing and Piping Systems Installation
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 327320
New
DIBBS
Ready-Mix Concrete Supply
Ready-Mix Concrete Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 238210
New
DIBBS
Electrical Installation and Wiring Services
Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and Acceptance SupportThe contract entails performing comprehensive quality inspections for incoming and outgoing shipments at the origin location, adhering strictly to MIL-STD-1916 and AQL sampling standards to ensure all products meet government acceptance criteria. This work is critical to verifying compliance with military specifications before delivery, requiring precise execution of inspection protocols and documentation to support final acceptance by the Department of Defense. The performance location is designated as Robins AFB, Georgia, with all inspections to be conducted in alignment with the specified military standards. This is a small business set-aside subcontract under the NAICS code 541330, reserved exclusively for total small businesses as defined by the SBA, with a response deadline of August 13, 2026. The solicitation originates from the ASC Commodities Division, part of the Department of Defense, underscoring its importance to defense logistics and supply chain integrity. All work must be completed in accordance with federal acquisition regulations, and the contractor is expected to maintain rigorous quality controls to uphold the standards required for government contracts.
Engineering Services

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 484220
New
DIBBS
Transportation and Shipping to DLAThe contract requires the transportation and shipping of packaged and labeled bolts from the origin point to DLA Distribution Warner Robins, GA, with strict adherence to DPAS priority rating, FOB origin terms, and the use of U.S.-flag vessels if ocean freight is involved. All shipments must comply with federal regulations governing defense logistics, ensuring timely and secure delivery to the specified performance location at Robins Air Force Base, Georgia. The requirement emphasizes full compliance with transportation standards and documentation to meet Department of Defense supply chain protocols. This subcontract is a Total Small Business Set-Aside under the SBA program, reserved exclusively for small businesses as defined by FAR 19.5, with the NAICS code 484220 indicating it pertains to truck transportation of freight. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, and is managed by the ASC Commodities Division under the Department of Defense. Interested parties must submit proposals through the DIBBS portal, and all logistical operations must align with federal procurement and national security shipping mandates.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details