Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SCREW, CAP, SOCKET HE

Active
SPE7M2-26-T-6182Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 24 socket head cap screws identified by NSN 5305-01-426-4612 and part number NAS1352C03LE6, conforming to the non-government standard NAS1352 Rev 13 dated 05/31/2016. The item is classified as a commercial item and is designated as a critical application component, requiring strict adherence to dimensional and quality controls per SPE7M2-26-T-6182 Section B and MIL-STD-130N for marking, excluding self-locking nuts and threads below specified sizes. Sampling must follow MIL-STD-1916, ASQ H1331 Table 1, or an approved zero-based plan, with zero non-conformances required unless otherwise stated, and verification levels assigned per critical, major, and minor attributes. Mercury and mercury-containing compounds are strictly prohibited in the hardware and all packaging processes, except for specified functional uses in batteries, instruments, or defense systems as authorized by NAVSEA, with portable fluorescent lamps requiring secondary containment. Packaging must comply with MIL-STD-2073-1E, including preservation method 10 and packaging code U, and marking per MIL-STD-129 with no special markings required. Palletization follows DLA packaging requirements, and delivery is FOB origin with a 158-day lead time, to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at destination, with no variance allowed in quantity, and the contract is tied to solicitation SPE7M2-26-T-6182, with a required ship date of January 26, 2027.

General Info

24 NAS1352C03LE6 socket screws, critical application, MIL-STD compliant, no mercury, FOB origin, ship by Jan 26, 2027

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M2-26-T-6182 for DLA Land and Maritime Nuclear Reactor Program

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
David Larsen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SCREW,CAP,SOCKET HE
SCREW,CAP,SOCKET HEAD
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
Unless otherwise stated, identification marking shall be in accordance with paragraph 4.1.b(2) of MIL-STD-130N. This is in addition to any required manufacturer's logo, lot number, and material identification markings.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
GAUGING REQUIREMENTS AS FOLLOWS
ALL CLASS 3A AND 3B THREADS WILL BE INSPECTED
FOR DIMENSIONAL CONFORMANCE IN ACCORDANCE WITH
SPE7M2-26-T-6182
SECTION B
SYSTEM 22 OF FED-STD-H28/20. THIS EXCLUDES
SELF-LOCKING NUTS, INTERNAL THREADS SMALLER
THAN .190 INCH DIA AND EXTERNAL THREADS SMALLER
THAN .138 INCH DIA.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC NON GOVT STD NAS1352 REVISION NR 13 DTD 05/31/2016 PART PIECE NUMBER: P/N NAS1352C03LE6
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017684764 0001 EA 24.000
NSN/MATERIAL:5305014264612
DELIVERY (IN DAYS):0158
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE7M2-26-T-6182
SECTION B
PR: 7017684764 PRLI: 0001 CONT’D
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/26/2027 Original Required Delivery Date:05/24/2027
SPE7M2-26-T-6182 NSN/Part Number: 5305-01-426-4612 Quantity: 24 EA Purchase Request: 7017684764QTY: 24 Delivery: 158 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-14PC
The contract pertains to the procurement of flat washers identified by NSN 5310015220642 and part number ISO7089-A8.4-200HV-A2L, manufactured in compliance with DIN EN ISO 7089 Revision 11/01/2000 and classified as a critical application item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any other standards including ASTM D3951. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated, and attributes are to be verified at designated levels: VII for critical, IV for major, and II for minor. Packaging and labeling must adhere to MIL-STD-129 and DLA Packaging Requirements for Procurement, with palletization and unit packaging strictly controlled as specified. The units are to be delivered FOB origin within 30 days of the need ship date with no tolerance for quantity variance. Two delivery lines are specified: 722 units to be shipped to Tracy, CA by September 17, 2026, and 6,733 units to be shipped to Albany, GA by July 13, 2027, both with an original required delivery date of January 31, 2027. Inspection and acceptance occur at the destination, and all documentation must reference the authorized DoD unit of issue, with corresponding ANSI X12 conversions available through the designated DLA link. The solicitation was issued under SPE4A6-26-T-14PC with a response deadline of August 17, 2026, and is managed by the Department of Defense, ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-26-T-14MP
The contract specifies a single hexagon head cap screw with NSN 5305-01-652-3158, requiring delivery of exactly one unit within ten days from the contract date, delivered FOB origin. The item must comply with technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, with zero non-conformances mandated unless otherwise stated, and unspecified attributes are treated as major. Packaging and palletization adhere to DLA’s procurement requirements, and the item must be shipped via the fastest traceable means, excluding parcel post. The delivery destination is a U.S. Army facility in Drawsko Pomorskie, Poland, with the shipment identified by RDD 555 and project code TP 2. The contract uses the DoD unit of issue and is governed by the DLA revision in effect on the award date. The sole supplier listed is ADAMS NUT AND BOLT CO INC with part number 1WWH, though GENERAC MOBILE PRODUCTS, LLC is also identified with part number 60637. Inspection and acceptance occur at destination, with no tolerance allowed for quantity variance. All documentation and compliance are tied to solicitation SPE4A6-26-T-14MP, with an original required delivery date of July 31, 2026.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A0-26-T-4215
The contract is for the procurement of two socket head cap screws with part number 23-10572-275 and NSN 5305-01-336-6837, sourced from Daimler Truck North America LLC in Portland, OR. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on either the solicitation issue date or award date depending on acquisition size. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA packaging standards, and item identification marking is required under RQ017, though unique identification is waived per the service customer’s request. Sampling follows MIL-STD-1916 or an equivalent zero-based plan, with acceptance strictly requiring zero non-conformances unless otherwise specified, and attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs. There is no shelf life requirement for the material. Delivery is due within five days of contract award, FOB origin, with no variance permitted in quantity, and inspection and acceptance occur at the destination. The shipment must be sent via traceable means, excluding parcel post, to the designated delivery point at Fort Bragg, NC, with the freight and mark-for addresses matching. The item must be labeled and documented per the specified requirements, including the contract number SPE4A0-26-T-4215, purchase request 7017722270, and government-specific identifiers. The required delivery date is August 4, 2026, with a solicitation posting date of August 9, 2026, and response deadline of August 17, 2026. The contracting office is under the Department of Defense’s Aviation Supply Chain ESOc Buys, with Danita Davis as the primary point of contact.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-14NK
The contract specifies the procurement of 124 units of a hexagon head cap screw with NSN 5305-01-373-8720 under solicitation SPE4A6-26-T-14NK, with a required delivery within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and compliance is mandatory based on the revision in effect on the solicitation or award date. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and attribute classifications must align with specified verification levels or AQLs. The item includes technical data subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DLA training, and formal authorization. The contract is managed by the Department of Defense’s ASC Commodities Division with primary point of contact Ashley Jones-Turner, and responses are due by August 17, 2026.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-T-945H
This contract covers the procurement of a mounting bracket identified by part number 347/22650 and NSN 5340016196797, with a quantity of 15 units delivered FOB origin under solicitation SPE7L1-26-T-945H. The delivery is required within 165 days from the contract award, with no variability in quantity allowed, and inspection and acceptance occur at the destination facility in New Cumberland, Pennsylvania. All items must comply with the DLA Master List of Technical and Quality Requirements, including MIL-STD-130N for identification marking and MIL-STD-129 for packaging and labeling, with packaging adhering to RP001 DLA Packaging Requirements. Hazardous materials must be packaged per TQ requirement IP025 under FED-STD-313, while non-hazardous materials must follow ASTM D3951—though DLA requirements supersede ASTM. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by specifications. The item must be palletized as specified, with the Unit of Issue being each and the Quantity per Unit Pack set at 1. The shipping address matches the delivery destination, and performance is governed by DLA procedural notes C19 and C20 for transportation. The contract was posted on August 9, 2026, with a response deadline of August 20, 2026, under NAICS code 332722, and is managed by the Department of Defense’s Land Supply Chain organization.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-14QX
The contract specifies the procurement of 6 units of PIN-RIVET with NSN 5320-01-716-0878 and part number HST12YW12-27 from HI-SHEAR CORPORATION, under solicitation SPE4A6-26-T-14QX, with a required delivery date of April 7, 2027, and a 98-day delivery window. The unit price is $6.00 per EA, totaling $36.00, with zero variance allowed in quantity. Delivery is FOB origin, and inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951, but must conform to higher-priority DLA Master List of Technical and Quality Requirements identified by R or I numbers, and all packing and labeling must follow MIL-STD-129. Palletization must meet DLA Packaging Requirements for Procurement (RP001), and the Unit of Issue and Quantity per Unit Pack are strictly defined. The delivery address is DLA Distribution Cherry Point, Phantom Rd, Building 147, Bay A, Cherry Point, NC 28533-5040, with transportation governed by DLAD Proc Notes C19 and C20. The contract references the DLA Unit of Issue conversion chart and applies the DLA Master List revision in effect on the solicitation issue date. The point of contact is Debra Fowler, and the solicitation was posted August 9, 2026, with aresponse deadline of August 17, 2026.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, SLOTT
Solicitation # SPE4A6-26-T-14QB
This contract outlines the procurement of a self-locking, slotted hexagon nut identified by NSN 5310-00-111-3813 and part number MS17826-10, manufactured to meet military and consensus standards including NASM25027 and MIL-STD-17826. The item is classified as a critical application and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. Quality assurance mandates sampling per MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Manufacturing must adhere to the current revision of the governing standard, and previously accepted revisions remain valid only for items produced prior to the solicitation date. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with specific packaging codes and methods detailed for protection and handling. Identification markings follow MIL-STD-130N unless otherwise stated, and physical identification requirements apply per the Qualified Suppliers List for Manufacturers and Distributors for Troop Support. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and a fixed quantity of 15 units is required with no variance allowed. Delivery must occur within 107 days of contract award, with the original required delivery date set for July 23, 2027. The shipment is to be delivered to DLA Distribution Cherry Point in North Carolina, under specific transportation protocols, and the unit price is $15.00 per each, totaling $225.00. The solicitation was issued on August 9, 2026, with a response deadline of August 17, 2026, under contract number SPE4A6-26-T-14QB.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-14NM
The contract is for the procurement of 9 units of a hi-shear rivet, part number HST12YW12-23, with NSN 5320-01-716-0691, issued under solicitation SPE4A6-26-T-14NM by the Department of Defense’s ASC Commodities Division. Delivery is required within 98 days, FOB origin, with no variance allowed in quantity, and all items must be delivered to DLA Distribution Cherry Point in North Carolina. Inspection and acceptance occur at the destination, and the supplier must comply strictly with the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Packaging must follow ASTM D3951, but alignment with MIL-STD-129 for marking and labeling is mandatory, and palletization must meet DLA’s packaging requirements. Sampling for quality verification is governed by MIL-STD-1916 or an equivalent zero-based plan, with specified acceptance levels: critical attributes require zero nonconformances at AQL 0.1, major at 1.0, and minor at 4.0, with unspecified attributes treated as major. The unit price is $9.00 per unit, totaling $81.00, and the supplier must adhere to all DLA transportation and shipping directives, including DLAD PROC NOTES C19 and C20. The original required delivery date is September 7, 2026.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-14LK
The contract pertains to the procurement of PIN-RIVET items identified by NSN 5320-01-513-6085, with a total quantity of 24 units requiring delivery within 97 days FOB origin, with no tolerance for variance in quantity. All items must be packaged in accordance with ASTM D3951 and marked and labeled per MIL-STD-129, with palletization aligned to DLA’s packaging requirements, and all DLA Master List of Technical and Quality Requirements supersede any conflicting standards. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, with acceptance criteria requiring zero non-conformances unless otherwise specified, and attributes are to be classified as Critical, Major, or Minor with corresponding verification levels or AQLs. The item is designated as a Critical Application Item, and sourcing may involve casting or forging processes requiring specialized tooling not held by the government; any such requirements must be addressed via a Casting and Forging Assistance Request to the designated DLA channels. Delivery is to be made to the DLA Distribution facility in New Cumberland, PA, with the required ship date set for November 23, 2026, and inspection and acceptance occurring at the destination. The solicitation number is SPE4A6-26-T-14LK, issued under a federal acquisition, with primary contact information provided for Ericka Mosley at DLA, and the NAICS code falls under 332722 for forgings and stampings.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
LATCH, THUMB
Solicitation # SPE7L1-26-T-944B
This contract pertains to the procurement of one unit of a LATCH, THUMB with NSN 5340-01-598-5609 and part number K5-2857-07 under solicitation SPE7L1-26-T-944B, issued by the Department of Defense through the Land Supply Chain. The item must be delivered within ten days of contract award to Fort Bliss, Texas, with delivery terms FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with DLA requirements, including MIL-STD-129 labeling and ASTM D3951 for non-hazardous goods, with DLA Master List requirements overriding all other standards. The product must not contain any Class I ozone-depleting chemicals, and any substitute chemicals require prior approval. The supplier must adhere to CMMC Level 2 self-assessment cybersecurity requirements and follow all DLA packaging, marking, and shipment protocols, including the use of traceable freight methods and no parcel post. The shipment must be marked with the provided military address and reference RDD 555, and the required delivery date is August 5, 2026. The point of contact for inquiries is Michael Nordahl, with email and phone details provided for coordination.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HE
Solicitation # SPE4A6-26-T-14KB
This contract is for the procurement of a self-locking nut identified by NSN 5310-01-647-9314, with a quantity of one package containing fifty units. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. Sampling procedures follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Acceptance requires zero non-conformances in the sample lot unless otherwise stated. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons and requiring prior authorization from the Department of State or Commerce. Access is limited to DLA contractors with approved JCP certification, completed training, and formal authorization. The delivery is due within ten days after delivery order, with the place of performance listed as Camp Lejeune, NC. The solicitation was posted on August 9, 2026, with responses due by August 17, 2026, under solicitation number SPE4A6-26-T-14KB, and is categorized under NAICS code 332722. Primary point of contact is Hannah Shimer at DLA.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCK
Solicitation # SPE7L5-26-T-4916
The contract specifies the procurement of 56 washer, lock units with NSN 5310-01-178-1946 under solicitation SPE7L5-26-T-4916, with a required delivery date of January 15, 2027, and a 150-day lead time. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with specific packaging codes and unit container requirements outlined. The item is classified as a critical application item sourced from Fairbanks Morse, LLC, and all supplies must strictly adhere to DLA packaging and transportation requirements, including adherence to RP001 and DLAD procedural notes for shipping and destination logistics. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract, with compliance enforced through mandatory documentation such as Source Approval Requests and Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessments. Mercury and mercury-containing compounds are prohibited unless specifically exempted for functional applications like batteries or weapons systems, and where used, must include secondary containment. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned strict verification levels or AQLs. All items must be physically identified per RQ017, and government identification must be removed from non-accepted supplies. The contract incorporates cybersecurity, safety, and environmental controls, and units of issue align with DoD standards. The primary point of contact is Christopher Walker of the Department of Defense, with solicitation responses due by August 17, 2026.
LAND SUPPLIER OPNS ENGINES

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 335931
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M2-26-T-6183
This contract pertains to the procurement of electrical contacts identified by NSN 5999-01-082-0297, with a total quantity of 7,597 units to be delivered FOB origin within 220 days of contract award. The item is classified as a critical application item and designated as a commercial product of a type, subject to the technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, specifically governed by SAE AS39029 Revision E dated May 1, 2023. Packaging and labeling must comply with MIL-STD-2073-1E and MIL-STD-129, requiring each unit to be marked with the current and most recently superseded part numbers; however, an exception is permitted where only the current required part number must appear on the label. The product is exempt from intentional mercury content except where used in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or specified chemical reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Delivery is directed to DLA Distribution at the New Cumberland, Pennsylvania facility, with inspection and acceptance occurring at the destination. The contract enforces a zero percent quantity variance and requires adherence to hazardous materials shipping protocols under IP025. The unit of issue is each (EA), with a total price of $7,597.00, and all documentation and compliance are tied to the referenced DLA procurement procedures and technical directives.
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
PIN, TAPERED, PLAIN
Solicitation # SPE7M2-26-T-6173
The item is a tapered plain pin with NSN 5315-01-723-0297, ordered in a quantity of three units under purchase request 7017777811, with delivery required within 165 days after award. The solicitation number is SPE7M2-26-T-6173, posted on August 9, 2026, with responses due by August 20, 2026, and is issued by the Department of Defense’s Nuclear Reactor Program. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. The technical data associated with this item is subject to export control under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, including within the United States, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed required DLA export control training and questionnaires, and have received formal approval from DLA. Configuration changes must follow formal engineering change proposal procedures, and any deviations or waivers require formal variance requests. The place of performance is New Cumberland, Pennsylvania, 17070-5002, and the primary point of contact is David Larsen at david.larsen@dla.mil.
Other Fabricated Wire Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL, LUG
Solicitation # SPE7M2-26-T-6164
This contract specifies the procurement of terminal lugs identified by NSN 5940-01-054-6295 under solicitation SPE7M2-26-T-6164, with a total quantity of 4,846 packages, each containing 100 units, resulting in 484,600 individual terminals. The items are classified as commercial items and are subject to the Qualified Products List or Qualified Manufacturers List requirements, meaning only approved manufacturers may supply them. Technical compliance is governed by SAE AS21004F Revision F and AS7928 Revision C, with configuration changes requiring formal Engineering Change Proposals or variance requests. Mercury or mercury-containing compounds are expressly prohibited from direct contact with the hardware except for specific exempted applications such as functional batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents, with additional containment requirements for portable devices containing mercury in accordance with NAVSEA 5100-003D. All packaging must adhere to MIL-STD-2073-1E, with marking compliant to MIL-STD-129, no special marking required, and palletization in line with DLA packaging guidelines. Barcoding must conform to ISO/IEC 16388. Delivery is FOB origin with the destination being the DLA Distribution facility in New Cumberland, Pennsylvania, and the required delivery date is 158 days after award with a need ship date of January 26, 2027. Inspection and acceptance occur at destination with zero variance permitted in quantity. The contract references the DLA Master List of Technical and Quality Requirements for applicable R and I numbers, and transportation details are governed by DLAD procedures C19 and C20.
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
INSERT, SCREW THREAD
Solicitation # SPE7M2-26-T-6176
The contract is for the procurement of 2,174 units of INSERT, SCREW THREAD under solicitation SPE7M2-26-T-6176, with a delivery deadline of 158 days after contract award. The item is classified as a commercial item and must comply with the current revision of the applicable military or consensus non-government part standard, with past revisions accepted only for previously manufactured hardware. All hardware produced after the solicitation date must adhere strictly to the latest version of the standard. Compliance with MIL-STD-130N for identification marking of U.S. military property is required, and all supplies must be marked accordingly. The contract incorporates technical and quality requirements from the DLA Master List, and packaging must meet DLA specifications. Zero-based sampling per MIL-STD-1916 or ASQ H1331 is mandated, with critical, major, and minor attributes assigned specific verification levels or AQLs unless otherwise stated; unspecified attributes are treated as major. No intentional addition of mercury or mercury-containing compounds is permitted unless for specific exempted uses such as batteries, fluorescent lamps, or specialized instrumentation, and where used, those items must include a secondary containment to prevent leakage. Configuration change management, variance requests, and covered defense information rules are in effect, and all government identification must be removed from non-accepted supplies. The solicitation is fully competitive under a federal specification and managed by the Department of Defense’s Nuclear Reactor Program, with technical inquiries directed to David Larsen at DLA.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M2-26-T-6163
The contract is for a nonmetallic hose assembly, part number 88043-224 with NSN 4720-01-379-4569, with a total quantity of 30 units, each 360 inches (30 feet) in length. The item is classified as a critical application item and must comply with stringent packaging and handling requirements per MIL-STD-2073-1E and DLA packaging standards. Each hose must be securely mounted on a reel, roll, or spool for safe transport, enclosed in a double-walled, weather-resistant fiberboard container (ASTM-D5118 Type CF), and all openings must be sealed with plastic plugs or end caps to prevent contamination. Packaging must include protective wrapping using code CA to reduce abrasion, and marking must conform to MIL-STD-129 with special codes including “ARROW UP” and “OPEN THIS SIDE.” As protected cargo, the item’s nomenclature must be omitted from outer packaging per MIL-STD-129, paragraph 5.4.1.6. The contract enforces zero tolerance for quantity variance and specifies delivery FOB origin with inspection and acceptance occurring at destination. The supplier must comply with DLA’s technical and quality requirements referenced in the DLA Master List and adhere to CMMC Level 2 self-assessment for cybersecurity. Delivery is due within one day of award, with the original required delivery date of January 26, 2027, and the need ship date set for August 22, 2026. Fulfillment must be shipped to the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002. The contractor is obligated to provide shelf life data if applicable and notify the DLA Land and Maritime Contract Administrator for any required updates. The solicitation number is SPE7M2-26-T-6163, issued by the Department of Defense under the Nuclear Reactor Program, with the point of contact being Kirstan Seck.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
PIPE, METALLIC
Solicitation # SPE7M2-26-T-6162
This contract specifies the procurement of 101 linear feet of seamless stainless steel pipe, grade TP304, schedule 80, with nominal 1-inch diameter and random lengths between 12 and 24 feet. The item is classified as a commercial item and a critical application component, subject to full and open competition. Technical and quality standards are governed by ASTM A312/A312M Revision B dated May 1, 2025, and all requirements are aligned with the DLA Master List of Technical and Quality Requirements referenced in RP001 and RA001. The pipe must be free of intentional mercury or mercury-containing compounds, with exceptions only for approved functional uses such as batteries, instrumentation, or weapons systems, and any portable mercury-containing devices must include shockproof design and secondary containment per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E, including specific preservation, wrapping, and cushioning methods, while marking adheres strictly to MIL-STD-129N with barcoding per AIM BC1. Palletization limits gross weight to 2,000 pounds per lift, and all shipments require compliance with DLA packaging and transportation procedures. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and a quantity tolerance of plus or minus 10 percent applies. The item is identified by NSN 4710-01-155-0196 and purchase request number 7017685265, with a unit price of $101.00 per foot for a total contract value of $10,201. Required delivery is within 158 days of contract award, with an original delivery date of March 27, 2027, and a needed ship date of January 26, 2027. The delivery destination is DLA Distribution San Joaquin, receipt warehouse 57, located at 25600 S Chrisman Rd, Tracy, CA 95304-5000, United States. All shipments must follow DLAD proc notes C19 and C20 for transportation and first destination handling. The solicitation number is SPE7M2-26-T-6162, issued under the NAICS code 332996 by
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCK
Solicitation # SPE7M2-26-T-6172
The contract specifies the procurement of washers, lock, identified by NSN 5310000115093, under solicitation SPE7M2-26-T-6172, with a total quantity of 552 hardware units divided into two line items: 55 units and 497 units. All items must conform to technical standards NASM35338 Revision 5 and ASME B18.21.1 Revision 9, with strict adherence to configuration change management and engineering change proposal requirements. Full and open competition applies, and the item is designated as a critical application component. Mercury and mercury-containing compounds are strictly prohibited in the hardware, preservation, packaging, and marking processes, except for specific functional uses in batteries, fluorescent lights, sensors, weapon systems, or chemical reagents approved by NAVSEA, with additional containment requirements for portable devices. Packaging must comply with MIL-STD-2073-1E and ASTM D3951, using preservation method code 10, and marking must follow MIL-STD-129 without special marking codes. Palletization must meet DLA packaging requirements, and delivery is FOB origin with no variance allowed in quantity. Inspection and acceptance occur at destination, with delivery timelines of 186 days from contract award. Deliveries are split between two DLA distribution centers: Hill AFB, Utah, and New Cumberland, Pennsylvania, with specific shipping addresses and parcel post instructions provided. The contract enforces compliance with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and all provisions are controlled by the revision in effect on the solicitation issue date. The original required delivery date is March 20, 2027, with need ship dates of June 15, 2027, for the first shipment and February 23, 2027, for the second.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SHEET, ELECT
Solicitation # SPE7M2-26-T-6175
The contract calls for the procurement of electrical insulation sheets measuring 48 inches by 36 inches by 0.75 inches, with a total quantity of 2,199 sheets, unit of issue being SHEET. The material must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and only approved suppliers—K-FLEX USA L.L.C. with part number 6RSHF3X4068 and ARMACELL LLC with part number NHS34043—are authorized. Mercury and mercury-containing compounds are strictly prohibited in the product, its packaging, preservation, or marking, with limited exceptions for functional applications like batteries or instruments specified by NAVSEA, which must include secondary containment and be shockproof per NAVSEA 5100-003D. The insulation sheet is designated as a critical application item, requiring full compliance with all DLA packaging guidelines including MIL-STD-2073-1E and MIL-STD-129 for marking, no special marking is required, and palletization must follow RQ001 standards. Delivery is FOB origin with zero variance allowed in quantity, inspected and accepted at destination. The delivery deadline is 134 days after award, with a required ship date of January 2, 2027, and original delivery date of February 2, 2027. All shipments must be sent to DLA Distribution San Diego at the designated address, and transportation protocols follow specific DLAD procedural notes. The solicitation number is SPE7M2-26-T-6175, with a response deadline of August 20, 2026, and the contract falls under NAICS code 335932 for the Department of Defense’s Nuclear Reactor Program.
Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE7M2-26-T-6186
The contract pertains to the procurement of 4,637 plain hexagon nuts identified by NSN 5310-01-089-3714 under solicitation SPE7M2-26-T-6186, issued by the Department of Defense’s Nuclear Reactor Program. The nuts are sourced in full competition in compliance with applicable military or federal specifications, and the solicitation incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date depending on the acquisition type. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. The delivery timeline requires fulfillment within 151 days after order, with performance taking place at Tracy, California, 95304-5000. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is categorized under NAICS code 332722 for fastener manufacturing. Primary point of contact for inquiries is David Larsen, reachable via email and phone provided.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL, LUG
Solicitation # SPE7M2-26-T-6181
This contract is for the procurement of TERMINAL, LUG with NSN 5940-01-054-6295, under solicitation SPE7M2-26-T-6181, requiring 684 packages, where each package contains 100 units. The item is classified as a commercial item and is subject to a Qualified Products List or Qualified Manufacturers List, meaning only approved suppliers may fulfill the contract. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition type. Configuration changes require formal Engineering Change Proposal or variance requests, and mercury or mercury-containing compounds are strictly prohibited unless specifically exempted for functional uses such as batteries, lights, or weapon systems, with additional containment and safety requirements per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking per MIL-STD-129, no special markings required, and barcoding in accordance with ISO/IEC 16388. The product is designated a Critical Application Item and must meet SAE AS21004F and AS7928 revisions dated 2023 and 2019 respectively, with part number MS21004-4. Delivery is FOB origin with a 151-day lead time, no variance allowed in quantity, and inspection and acceptance occur at destination. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required delivery date is April 6, 2027, with a need ship date of January 19, 2027. Transportation and shipping follow DLA Procurement Notes C19 and C20. The contract is issued by the Department of Defense under the Nuclear Reactor Program, with primary point of contact Vlada Artyemova, and was posted on August 9, 2026, with proposals due by August 20, 2026.
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
SWITCH ASSEMBLY
Solicitation # SPE7M2-26-T-6166
This contract pertains to the procurement of a switch assembly identified by NSN 5930016055090 and part number 159400G1, with a total quantity of three units to be supplied under solicitation SPE7M2-26-T-6166. Delivery is required within 158 days of award, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the destination, and all items must comply with DLA packaging requirements, including MIL-STD-2073-1E and MIL-DTL-28786 for preservation and packaging, as well as MIL-STD-129 for marking. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries, fluorescent lights, sensors, weapon systems, or reagents specified by NAVSEA; portable devices containing mercury must include shockproof design and a secondary containment boundary per NAVSEA 5100-003D. Packaging must be palletized per DLA guidelines, with no hazardous material transport allowed via parcel post unless following DLAD PROC NOTE C19 and C20. The designated delivery address is the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract is a total small business set-aside under NAICS code 334419, with a response deadline of August 20, 2026, and the award is anticipated to be made by the Nuclear Reactor Program under the Department of Defense. The unit price is $3.00 per item, with an aggregate total price of $9.00.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE7M2-26-T-6169
The contract specifies the procurement of 30 plain hexagonal nuts with a 0.875 inch diameter, threaded to 0.875-14UNF-2B, manufactured from nickel alloy grade 500 in an annealed and hardened condition. These nuts are defined as a commercial item and must conform to the current revision of MIL-DTL-1222J, with historical production to prior but當時有效 revisions still acceptable. Mandatory identification includes the material symbol .K., the manufacturer's symbol, and lot number as required by MIL-DTL-1222J paragraph 3.13, and additional marking per MIL-STD-130N. The item is classified as critical application hardware and may not contain mercury or mercury compounds except under specific, narrowly defined exceptions such as functional use in batteries, instruments, or weapon systems, with portable fluorescent lamps and instruments requiring shockproof design and secondary containment per NAVSEA 5100-003D. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed unless otherwise specified, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. Packaging must comply with MIL-STD-2073-1E, using preservative method 10, with marking per MIL-STD-129 and no special markings required. Palletization follows DLA packaging requirements, and delivery is FOB origin to Tracy, California, with a 165-day delivery schedule, inspection and acceptance occurring at destination, quantity strictly fixed at 30 units with no variance allowed.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details