SCREW, CLOSE TOLERAN

The contract specifies the procurement of a close-tolerance screw identified by NSN 5305-01-310-6831 and part number NAS1571C3R22, manufactured in accordance with the non-government standard NAS1581 Revision 14 dated 03/31/2020. All items must meet current revision requirements of the applicable standard, with prior revisions acceptable only for hardware manufactured before the solicitation date. The screw is classified as a critical application item and must be inspected for dimensional conformance using System 22 of Fed-Std-H28/20 for all Class 3A and 3B threads, excluding self-locking nuts and threads below specified diameters. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as defined. The item must be marked per RQ017 and packaged per ASTM D3951 and MIL-STD-129, with palletization in compliance with DLA packaging requirements, and all packaging must conform to the DLA Master List of Technical and Quality Requirements which supersede other standards. The contract mandates origin inspection and acceptance, with delivery FOB origin and a strict quantity variance of plus or minus zero percent. A total of 48 units are required at a unit price of $48.00, with a total contract value of $2,304. Delivery is due in 137 days, with an original required delivery date of May 29, 2027, and a needed ship date of December 20, 2026. Packaging and labeling must align with specified military standards, and all shipments must be sent to the DLA Distribution facility at New Cumberland, Pennsylvania. Transportation procedures follow DLAD Proc Notes C19 and C20. The solicitation number is SPE4A6-26-T-09UG, with a response deadline of August 4, 2026, and primary point of contact located at DLA. The unit of issue is each (EA), and all technical and quality requirements referenced are governed by the DLA Master List, which is authoritative and accessible online.