This Solicitation opportunity from Department Of Defense was posted on May 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
SCREW, CLOSE TOLERAN
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
This contract is for the procurement of 1,813 package units of a close tolerance screw identified by NSN 5305-01-104-1068, designated as a commercial item and subject to stringent technical, quality, and compliance requirements. Each package contains ten screws, and delivery is mandated within 128 days after order, with FOB Origin terms and destination at the DLA Distribution facility in New Cumberland, Pennsylvania. The item must be manufactured in accordance with specific reference drawings, including revisions dated through 2020, and may require casting or forging using special tooling not held by the government, necessitating a Casting and Forging Assistance Request for sourcing support. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with all packaging and labeling conforming to MIL-STD-129 and ASTM D3951, though DLA requirements supersede ASTM specifications. Palletization must follow RP001 guidelines, and physical identification of bare items is required per RQ017. Inspection and acceptance follow strict sampling protocols defined by MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with attributes classified as critical, major, or minor assigned specific verification levels or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Acceptance requires zero non-conformances when using MIL-STD-105/ASQ Z1.4. The contract explicitly prohibits the use of additive manufacturing for this item unless formally approved by the Contracting Officer and Engineering Support Activity. It incorporates critical compliance clauses including the Buy American Act and Berry Amendment, prohibition of hexavalent chromium, export controls, and safeguarding of covered contractor information systems under NIST SP 800-171 and FAR 52.240-93. Offerors must be certified small businesses and maintain current SAM registrations, provide Safety Data Sheets for any hazardous materials, and comply with trafficking prevention and electronic invoicing via WAWF. All bids must be submitted through DIBBS by June 5, 2026, and the contract includes provisions for accelerated payments to small business subcontractors and electronic submission of payment and receiving reports, with DoDAAC information to be determined upon award.
General Info
Agency
NAICS
Place of Performance
2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
SCREW, CLOSE TOLERANCE
Casting/forging may be required to manufacture this NSN and tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please submit a Casting and Forging Assistance Request at either https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/ or Land & Maritime Supply Chains DSCC.cast.forge@dla.mil. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
-
U/I PG (PACKAGE) CONTAINS 10 EACH SCREWS
-
SPE4A6-26-T-73C5
SECTION B
CRITICAL APPLICATION ITEM
THE BOEING COMPANY 76301 P/N 3M926-4L7
HOWMET GLOBAL FASTENING SYSTEMS INC 06950 P/N HT4068-4-7A
HUCK INTERNATIONAL, INC 17446 P/N HT4068-4-7A
SPS TECHNOLOGIES, LLC 56878 P/N HT4068-4-7A
HI-SHEAR CORPORATION 73197 P/N HT4068-4-7A
SPS Technologies, LLC DBA 80539 P/N HT4068-4-7A SPS TECHNOLOGIES LTD, TJ BROOKS K5673 P/N HT4068-4-7A WEST COAST AEROSPACE, INC. 60516 P/N WC4068-4-7
IAW REFERENCE DRAWING NR 76301 6M148 REVISION NR H DTD 06/29/2005 PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 76301 23M118 REVISION NR V DTD 04/13/2007 PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 98752 200415485 REVISION NR E DTD 01/30/2020 PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 76301 3M927 REVISION NR M DTD 11/03/2009 PART PIECE NUMBER: 3M926-4L7
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016941638 0001 PG 1,813.000
NSN/MATERIAL:5305011041068
DELIVERY (IN DAYS):0128
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE4A6-26-T-73C5
SECTION B
PR: 7016941638 PRLI: 0001 CONT’D
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:00/00/0000 Original Required Delivery Date:05/27/2026
SPE4A6-26-T-73C5 NSN/Part Number: 5305-01-104-1068 Quantity: 1,813 PG Purchase Request: 7016941638QTY: 1813 Delivery: 128 days ADO
More opportunities from Department Of Defense → ASC COMMODITIES DIVISION
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS