Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SCREW, CLOSE TOLERANCE

Active
SPE4A6-26-T-07BPFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 24 close-tolerance screws with NSN 5305-01-174-5028 under solicitation SPE4A6-26-T-07BP, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 173 days from award, and the item is subject to stringent technical and quality requirements incorporated from the DLA Master List of Technical and Quality Requirements, including packaging standards, identification protocols for non-accepted supplies, and bare item marking specifications. Quality assurance follows MIL-STD-1916 or ASQ H1331 sampling plans with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Technical data associated with this item is subject to export control under ITAR or EAR, and access is restricted to contractors with approved JCP certification, completed DOD training, and DLA authorization. The requirement also mandates CMMC Level 2 certification for any third-party assessment organization involved in cybersecurity compliance, and DFARS 252.225-7048 governs the handling of controlled technical data, which includes restrictions on disclosure to foreign persons regardless of location. The place of performance is specified as New Cumberland, PA, with primary point of contact Ashley Jones-Turner via email and phone provided for inquiries.

General Info

24 close-tolerance screws under DLA solicitation, strict quality and export controls, CMMC Level 2, delivery in 173 days, New Cumberland, PA.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-07BP DLA Aviation Jul 17 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Ashley JONES-TURNER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SCREW,CLOSE TOLERANCE
SCREW,CLOSE TOLERANCE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5305-01-174-5028 Quantity: 24 EA Purchase Request: 7017527632QTY: 24 Delivery: 173 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, EXThis contract is for the procurement of 12,382 self-locking, extended washer hexagon nuts with NSN 5310-00-807-1474 under a Firm Fixed Price Indefinite Delivery Purchase Order (IDPO) with a three-year base period and no options, subject to a total maximum contract value of $1,000,000. The delivery is due 405 days after award, with FOB origin terms, and the item is designated by the Navy as a Critical Safety Item requiring strict compliance with quality and sourcing controls. The nuts must conform to NASM21042 Revision 3 and NASM25027 Revision 1, alongside comprehensive technical and quality requirements from the DLA Master List, with inspection and acceptance performed at origin. Sampling must adhere to MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with verification levels assigned as VII for critical, IV for major, and II for minor attributes, and unspecified attributes treated as major. All items must be marked per MIL-STD-129, including lot and serial numbers, contractor and actual manufacturer CAGE codes, and part numbers, with packaging compliant with MIL-STD-2073-1E and DLA Packaging Requirements, and no mercury or mercury compounds permitted except under specific exceptions for functional uses in batteries, instruments, weapon systems, or NAVSEA-specified reagents, with portable devices requiring shock-proofing and secondary containment. The contract mandates adherence to multiple federal and defense acquisition regulations, including clauses on termination, excusable delays, changes, and prohibitions on certain telecommunications equipment, and requires electronic invoicing via WAWF. Offerors must be registered in SAM and complete required representations, including certifications regarding foreign ownership, export control, and inverted domestic corporations, with a deviation applied to 52.204-19. Export-controlled technical data subject to ITAR or EAR is involved, limiting participation to contractors with approved US/Canada Joint Certification Program credentials, completed DLA export training, and DLA authorization. Only small businesses are eligible under a total small business set-aside, and the award will be based on a best-value determination weighing price, past performance, and delivery performance, with past performance—particularly PIPRS assessments, quality history, and delivery compliance—weighed more heavily than quoted delivery. The contractor must maintain an approved inspection system
ASC COMMODITIES DIVISION

POSTED

in 33 minutes

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLATThe contract is for the procurement of one flat washer, NSN 5310-01-720-0978, with part number DS-932671, sourced from Eaton Aerospace, LLC or Jamaica Bearings Co., Inc., under solicitation SPE4A6-26-T-06ZW. The item is classified as a critical application component and must be delivered within five days of order placement to the Fleet Readiness Center East at Cherry Point, North Carolina, with FOB Origin terms. The total contract value is $1.000, with no quantity variance allowed. Inspection and acceptance occur at the destination, with quality assurance governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances in any sample lot unless otherwise specified, and attributes must be assigned verification levels or AQLs consistent with critical, major, or minor classifications. Packaging must comply with ASTM D3951 but is subordinate to the DLA Master List of Technical and Quality Requirements, with all markings and labeling strictly adhering to MIL-STD-129, including barcoding and unit of issue conformity. Palletization follows RP001 standards, and hazardous materials must be labeled in accordance with 29 CFR 1910.1200 or applicable federal statutes. Delivery is prohibited via parcel post and must be shipped by the fastest traceable means. The solicitation, issued by the ASC Commodities Division of the Department of Defense, incorporates numerous FAR and DFARS clauses including those on equal opportunity, combating human trafficking, employment eligibility verification, sustainable products, safeguarding contractor information systems, changes, subcontracting, and small business representation, all subject to a deviation under 2026-00038. Authorization and consent provisions include Alternate I and II of FAR 52.227-1, and accelerated payments to small business subcontractors are required. Offerors must provide a Unique Entity ID and CAGE code, represent size status and socioeconomic certifications, and comply with mandatory reporting triggers for covered telecommunications equipment or joint ventures. The solicitation deadline is July 24, 2026, and proposals must be submitted electronically through the DIBBS portal. The contract is fixed-price, with no options or extensions, and invoicing must be processed through WAWF.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
STUD, PLAINThe item described is a plain stud with NSN 5307-00-678-3314, quantity of 100 units, under purchase request 7017527935, with a delivery schedule of 156 days after award. The technical data associated with this item is subject to strict export controls under either ITAR or EAR, meaning any disclosure to foreign persons, regardless of location, including foreign nationals employed by U.S. companies or subsidiaries, requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and access is restricted solely to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed required training on proper handling of DOD export-controlled technical data, and have passed the DLA Export-Controlled Technical Data Questionnaire with approval from the DLA controlling authority. The solicitation number is SPE4A6-26-T-07AT, posted on July 16, 2026, with responses due by July 24, 2026, under NAICS code 332722, issued by the ASC Commodities Division of the Department of Defense. Performance is designated for Anniston, Alabama, 36201-4199, with Priscilla Holmes as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANThe contract solicits 73 close tolerance screws with the National Stock Number 5305-01-307-5883 under Purchase Request 7017486345. The delivery requirement specifies an anticipated delivery date 169 days after order placement. The solicitation is issued under contract number SPE4A6-26-T-07JT, posted on July 16, 2026, with a response deadline of July 24, 2026. It falls under NAICS code 332722 and is classified as a federal procurement managed by the ASC Commodities Division within the Department of Defense. Performance is designated for New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. Primary point of contact is Vincent Price, reachable via email at vincent.1.price@dla.mil or phone at 7027437330. The solicitation is open for response through the DIBBS procurement portal.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGONThis contract specifies the procurement of 66 plain hexagon nuts with NSN 5310-01-090-2128 under solicitation SPE4A6-26-T-07BC, issued by the Department of Defense’s ASC Commodities Division. Delivery is required FOB origin within 235 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination facility in New Cumberland, Pennsylvania. All items must comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over any other standards, including ASTM D3951 for packaging. Packaging and marking must adhere to MIL-STD-129 and DLA Packaging Requirements, and palletization must follow RP001 guidelines. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise stated, and attributes are assigned specific verification levels or AQLs. The item is supplied by L3 Technologies, Inc. with CAGE code 50643, and physical identification markings on bare items must be applied per RQ017. The contract includes specific transportation instructions referenced in DLAD Proc Notes C19 and C20 and mandates use of the DLA-approved unit of issue. The required delivery date is March 17, 2027, and all documentation must reflect government compliance protocols including the removal of government identification from non-accepted supplies.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details