Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SCREW, CLOSE TOLERANCE

Active
SPE4A6-26-T-06AXFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of close-tolerance screws under solicitation SPE4A6-26-T-06AX with a total quantity of 379 units, each priced at $379.00, for delivery within 146 days of award. The item is identified by NSN 5305014622698 and is designated as a critical application item, requiring strict compliance with technical and quality standards enumerated in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. Manufacturing and non-manufacturing suppliers must adhere to tailored higher-level quality requirements, including zero-defect sampling under MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. All items must be marked with approved part numbers from approved manufacturers including Boeing, Reid Products, SPS Technologies, Howmet, and others, and labeled per MIL-STD-129 with packaging conforming to DLA’s packaging directives and palletization standards. The items must be delivered FOB origin to DLA Distribution San Diego with no variance permitted in quantity, inspected and accepted at destination, and shipped by the required date of January 30, 2026, with the original delivery target of February 19, 2027. All shipments must align with DLA transport procedures C19 and C20, and the unit of issue and packaging are strictly defined in the contract terms.

General Info

379 close-tolerance screws at $379 each, due Jan 30, 2026, FOB origin, strict quality and labeling rules.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-06AX.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
ANTONIA Willcox
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SCREW,CLOSE TOLERANCE
SCREW,CLOSE TOLERANCE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
THE BOEING COMPANY 76301 P/N 3M1169V3-2A
REID PRODUCTS INC. 59563 P/N 11827V3-2A
B & B SPECIALTIES INC 1EM77 P/N GS1006V3-2A
SPS TECHNOLOGIES, LLC 06725 P/N TX1026V3-2A
HOWMET GLOBAL FASTENING SYSTEMS INC 06950 P/N TX1026V3-2A
SPS TECHNOLOGIES LLC 27624 P/N TX1026V3-2A
SPS TECHNOLOGIES, LLC 56878 P/N TX1026V3-2A
HI-SHEAR CORPORATION 73197 P/N TX1026V3-2A
SPS Technologies, LLC DBA 80539 P/N TX1026V3-2A HOWMET GLOBAL FASTENING SYSTEMS INC 92215 P/N TX1026V3-2A HEARTLAND PRECISION FASTENERS INC 0ZC92 P/N TX1026V3-2A ARCONIC GMBH C4293 P/N TX1026V3-2A LISI AEROSPACE CANADA CORP DIV HI L4528 P/N TX1026V3-2A
SPE4A6-26-T-06AX
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017487355 0001 EA 379.000
NSN/MATERIAL:5305014622698
DELIVERY (IN DAYS):0146
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:010
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
Need Ship Date:01/30/2026 Original Required Delivery Date:02/19/2027
SPE4A6-26-T-06AX
SECTION B
PR: 7017487355 PRLI: 0001 CONT’D
SPE4A6-26-T-06AX NSN/Part Number: 5305-01-462-2698 Quantity: 379 EA Purchase Request: 7017487355QTY: 379 Delivery: 146 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
STUD, PLAINThe contract involves the procurement of 797 units of a plain stud with NSN 5307-01-374-7076 under solicitation SPE4A6-26-T-06AZ, with delivery required within 171 days to the DLA Distribution facility in New Cumberland, Pennsylvania. The item is classified as a critical application item and must comply with stringent technical and quality standards referenced from the DLA Master List, including MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances required unless otherwise specified. Verification levels and AQLs are defined for critical, major, and minor attributes, and manufacturers may choose between attribute or variable inspection methods. The product must adhere to MIL-STD-2073-1E packaging standards, MIL-STD-129 marking requirements, and DLA packaging guidelines, with no mercury or mercury compounds permitted in preservation, packaging, or direct contact with the hardware except in specified exceptions like batteries or controlled instruments, which must include secondary containment per NAVSEA 5100-003D. Cybersecurity Maturity Model Certification Level 2 self-assessment is required, and all documentation must align with the version of the DLA Master List in effect on the solicitation issue date. The item is to be delivered FOB origin with no variance permitted in quantity, and inspection and acceptance occur at the destination. Packaging must be palletized per DLA requirements, with unit containers marked as D3 and intermediate containers labeled AAA, using the U pack code. Special marking is not required. The contract enforces removal of government identification from non-accepted supplies and includes tailored higher-level quality requirements for both manufacturers and non-manufacturers. The delivery address, shipping instructions, and transportation protocols are fully defined through DLA procedural notes C19 and C20. The contract was solicited on July 14, 2026, with responses due by July 22, 2026, under the NAICS code 332722, issued by the Department of Defense’s ASC Commodities Division, with David Williams as the primary point of contact. The original required delivery date is April 7, 2027, with a needed ship date of January 10, 2027.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEARThe contract is for the procurement of 42 BOLT,SHEAR items under NSN 5306-01-313-9137, issued as a fully competitive solicitation in accordance with a military or federal specification. The solicitation number is SPE4A7-26-T-571M, with a response deadline of July 22, 2026, and a required delivery within 115 days after award. Technical and quality requirements referenced in the document are dictated by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment updates the requirement. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance will occur at the origin, and non-accepted supplies must have government identification removed. Physical identification of bare items is required, though Item Unique Identification is not mandated per the service customer’s request, with DFARS 252.211-7003(c)(1)(i) governing this exemption. Covered defense information may apply, and performance is to be delivered to Cherry Point, North Carolina, with the primary point of contact being Naron Sanderlin at the Department of Defense’s ASC Supplier Operations AE and AF Division.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEThis contract specifies the procurement of 20 self-locking nuts, part number 5310-01-707-4996, under solicitation SPE4A6-26-T-06FG, with a required delivery date of March 7, 2027, and a delivery lead time of 171 days. The items must be delivered FOB origin to the designated receiving warehouse in Tracy, California, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including preservation methods, material specifications, and marking per MIL-STD-129. No special marking is required. Mercury and mercury-containing compounds are strictly prohibited in the hardware, preservation, packaging, and marking materials, except for specific functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemically specified reagents, which must meet additional containment and safety standards per NAVSEA 5100-003D. All portable fluorescent lamps and instruments containing mercury must have shock-proof design and a secondary containment boundary. Quality assurance provisions require sampling to be conducted in accordance with MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defect acceptance criterion unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Attributes not otherwise specified are treated as major. Source approval documentation must satisfy RC001 requirements, and all supplies must be physically identified per RQ017, with RIX Industries identified as the manufacturer under part number 53-4113. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements accessible via the provided URL, with the applicable revision determined by the solicitation or award date. The contract is subject to DLA transportation and freight handling procedures, and the unit of issue is each, aligned with ANSI X12 standards. The primary point of contact is Dana Barefoot, and the solicitation was posted July 14, 2026, with responses due by July 22, 2026.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HThe contract pertains to the procurement of a commercially available hexagon cap screw identified as a commercial off-the-shelf (COTS) item with the NSN 5305-01-529-4431 and part numbers 92240A635 from McMaster-Carr and 71192 from Fastenal. The item is designated as a critical application component and must comply with stringent military standards including MIL-STD-130N for identification marking and MIL-STD-129 for packaging and labeling. Technical and quality requirements referenced by R or I numbers from the DLA Master List supersede any other standards, including ASTM D3951. The product must be free of intentionally added mercury or mercury-containing compounds except in specified exceptions such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents approved by NAVSEA, and portable devices containing mercury must include a secondary containment boundary as per NAVSEA 5100-003D. Packaging must adhere to DLA-specific requirements for procurement, including palletization standards and unit packaging specifications, with delivery FOB origin within 20 days of contract award. Inspection and acceptance occur at the destination, with no variance allowed in quantity. The sole delivery address is Marine Aviation Logistics Squadron MALS-24 at MCAS Kaneohe Bay, Hawaii, with specified shipping and transportation protocols detailed in DLAD procedural notes. The contract is under solicitation SPE4A6-26-T-06HS with a required delivery date of April 23, 2026, and is managed by the DLA Commodities Division with primary point of contact Lisa Harvie.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThe contract is for 332 machine screws with NSN 5305-00-932-1831 under solicitation SPE4A6-26-T-06HB, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 359 days after award, with performance taking place in New Cumberland, Pennsylvania. The solicitation was posted on July 14, 2026, and responses are due by July 22, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and compliance is mandatory. The item includes technical data subject to export control under ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Commerce, including foreign nationals within the U.S. Contractors must hold a valid US/Canada Joint Certification Program status, complete required DLA export control training, and receive explicit approval to access the controlled data. Packaging must meet DLA standards, and non-accepted supplies must have all government identification removed. Higher-level quality requirements apply regardless of whether the supplier is a manufacturer or not, and the contract incorporates DFARS 252.225-7048 to enforce export control obligations.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details