Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SCREW, EXTERNALLY RE

Active
SPE4A6-26-T-05SSFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of 4 units of a screw with externally reinforced threading, identified by NSN 5305-01-693-0345 and part number 094566 from L3 Technologies, Inc. Delivery is required within 20 days FOB origin, with no variance permitted in quantity, and inspection and acceptance occur at the destination. The item must be packaged in compliance with MIL-STD-2073-1E, marked according to MIL-STD-129 with no special marking, and palletized per DLA packaging requirements. Mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries, fluorescent lamps, sensors, or weapon systems, with portable mercury-containing devices requiring shockproof construction and a secondary containment boundary in accordance with NAVSEA 5100-003D. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date depending on acquisition size. The item has no shelf life limitation. Delivery is to be made via traceable freight to the Naval Undersea Warfare Center Division Newport, not parcel post, with the required delivery date set for July 2, 2026, under contract SPE4A6-26-T-05SS.

General Info

Procure 4 screw units NSN 5305-01-693-0345, deliver by July 2, 2026, FOB origin, compliant with MIL standards, no mercury unless exempted.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

1176 HOWELL ST, NEWPORT, RI, 02841-1703, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-05SS for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
NYJEL KNOWLIN
contact@example.gov

Full Description

Show more
SCREW,EXTERNALLY RE
SCREW,EXTERNALLY RE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
L3 TECHNOLOGIES, INC. 34228 P/N 094566
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-26-T-05SS
SECTION B
PR: 7017397639 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017397639 0001 EA 4.000
NSN/MATERIAL:5305016930345
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BL OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N66604
NUWC DIV NEWPORT
1176 HOWELL ST
NEWPORT RI 02841-1703
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N66604
NUWCDIVNPT
NAVAL STATION NEWPORT
47 CHANDLER ST BLDG 47
NEWPORT RI 02841-1709
US
M/F: (TCN) N6660461774987
RDD: 205
PROJ: TV4 TP 3
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 09
DIC: A4A DIST: E9B ADV: 2L FC: DT
Need Ship Date:00/00/0000 Original Required Delivery Date:07/02/2026
SPE4A6-26-T-05SS
SECTION B
PR: 7017397639 PRLI: 0001 CONT’D

SPE4A6-26-T-05SS NSN/Part Number: 5305-01-693-0345 Quantity: 4 EA Purchase Request: 7017397639QTY: 4 Delivery: 20 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HThe contract pertains to the procurement of 1,317 units of a hexagon cap screw identified by NSN 5305-01-519-8733 under solicitation SPE4A6-26-T-05PE, with a delivery deadline of 151 days after award. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds to the hardware, with exceptions allowed only for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, and chemical analysis reagents approved by NAVSEA. Portable devices containing mercury must be shockproof and feature a secondary containment barrier in compliance with NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition size. The contract mandates adherence to MIL-STD-1916 or an equivalent zero-based sampling plan, with undefined attributes treated as major; inspection must result in zero non-conformances unless otherwise stipulated. All Class 3A and 3B threads must conform to System 22 of FED-STD-H28/20, excluding small internal and external threads. Items must be marked per MIL-STD-130N, and government identification must be removed from non-accepted supplies. Cybersecurity requirements mandate either a CMMC Level 2 self-assessment or certification by a C3PAO. Packaging, identification, and quality assurance are subject to DLA-specific directives including RD002, RQ001, RQ011, and RQ017. The contracting office is the ASC Commodities Division under the Department of Defense, with performance taking place in New Cumberland, PA, and primary contact information provided for administrative correspondence.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
PLUNGER, DETENTThe contract is for a single plunger, detent part identified by NSN 5340015960956 and vendor part number H00960RB, with a required delivery of one unit within 20 days of contract award. The item is designated as a critical application component and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly permitted by the specification. Packaging must adhere to DLA standards, including MIL-STD-129 labeling, ASTM D3951 for non-hazardous materials, or TQ requirement IP025 if classified as hazardous under FED-STD-313, with palletization following RP001. Delivery is FOB destination with zero quantity variance allowed, and inspection and acceptance occur at the delivery point. The item must be shipped via the fastest traceable method using RDD 777 and cannot be sent via parcel post; the destination is USS MARINETTE (LCS 25) at FPO AA 34088. The original required delivery date is June 30, 2026, and the solicitation was issued under contract number SPE7L3-26-T-116J with a response deadline of July 24, 2026. All shipments must reference the provided TCN and project codes, and government use identifiers must be applied as specified.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEARThe contract specifies the procurement of 23 shear bolts, identified by NSN 5306-01-014-2213 and part number NAS1305-25H, manufactured in accordance with the current revision of the non-government standard NAS1303 through NAS1320 Revision 13 dated January 31, 2001, and referenced technical data packages including QAP 13873 and drawing number 13873 EI-010142213. All items are classified as critical application hardware and must conform to stringent quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with mandatory compliance to MIL-STD-1916 or ASQ H1331 for sampling, zero non-conformances for acceptance unless otherwise stated, and full gaging of all Class 3A and 3B threads per SAE AS8879 or MIL-S-7742, excluding self-locking nuts and small-diameter threads. Each shipment requires a Certificate of Quality Compliance, including mill-material certification, delivered with every unit and forwarded to the DLA Troop Support Contracting Officer, while identification markings must follow MIL-STD-130N in addition to manufacturer-specific labeling. Packaging must align with ASTM D3951 and MIL-STD-129, adhering to DLA packaging rules and palletization standards, with no variance allowed in quantity. Delivery is FOB origin within 172 days from the contract’s original required delivery date of January 5, 2027, with inspection and acceptance also occurring at origin, and the item is designated as a commercial item under federal procurement rules.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANThe contract specifies the procurement of a close tolerance screw with part number C20645-3-2 and NSN 5305014586543, requiring 739 units to be delivered FOB origin within 341 days, with a unit price of $739.00 and a total value of $546,121. The item is designated as a critical application component, subject to stringent quality and configuration control requirements under DLA directives, including compliance with MIL-STD-1916 or comparable zero-based sampling plans where critical attributes demand verification level VII or AQL 0.1 and non-conformances must be zero unless otherwise stated. All supplies must adhere to MIL-STD-2073-1E packaging standards, MIL-STD-129 marking requirements, and DLA-specific packaging guidelines, with no special marking applied. Inspection and acceptance occur at the manufacturer’s origin, and configuration changes must be managed through formal engineering change proposals or variance requests. The contract incorporates technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date depending on acquisition size. A separate line item for the First Article Test (FAT) is included with a quantity of one unit, identified by NSN 0001S00000052, priced at $1.00 but with no separate charge assumed unless specified; the actual test quantity is defined under FAR clauses 52.209-3 or 52.209-4 in Section A of the solicitation, and the FAT line will not be awarded if the requirement is waived. Packaging and shipping instructions direct delivery to DLA Distribution Depot Hill at Hill AFB, Utah, referenced under DLA Procurement Notes C19 and C20 for transportation protocols. Multiple approved suppliers are listed including Lockheed Martin Corp, SPS Technologies LLC, Valley-Todeco Inc., and B & B Specialties Inc., all authorized under shared part numbers and manufacturer codes. The solicitation number is SPE4A6-26-T-05PM, issued by the Department of Defense’s ASC Commodities Division with a response deadline of July 21, 2026, and the contract is bound by comprehensive quality assurance provisions applicable to both manufacturers and non-manufacturers under tailored higher-level requirements.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLATThe contract specifies the procurement of flat washers identified by NSN 5310-00-141-1795 and part number NAS1149F0463P, with a total quantity of 157,389 units distributed across three delivery lines, each requiring firm fixed pricing and zero variance in quantity. The item is designated as a commercial item and a Navy-identified critical safety item, triggering stringent quality and traceability requirements including compliance with SAE AS9100 and AS9120 certifications for manufacturers and distributors. All supplies must conform to MIL-STD-129 marking standards, including lot and serial numbers, contractor and manufacturer CAGE codes, and part numbers, with packaging adhering to MIL-STD-2073-1E and DLA packaging guidelines. Mercury and mercury compounds are strictly prohibited in the product, preservation, packaging, and marking processes, except for specific authorized applications. Inspection and acceptance occur at origin, and the item must be delivered within 150 days of award. The technical data package references non-government standards NAS1149 Rev 8 and quality assurance plan QAP 13873, and all deviations or waivers must be submitted to the DSC contracting officer. Multiple approved sources are listed, including Northrop Grumman, Lockheed Martin, Sikorsky, and Superior Washer & Gasket Corp., with deliveries directed to three DLA distribution centers in Georgia, California, and Pennsylvania.
NUCLEAR REACTOR PROGRAM

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details