SCREW, MACHINE

The contract pertains to the procurement of machine screws identified by NSN 5305-01-254-2551, with a quantity of five packaging groups, each containing fifty screws, for a total of 250 units. Delivery is required within 20 days after contract award, and the solicitation is fully competitive under a military specification. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision determined by the solicitation or award date depending on procurement scale. All items must comply with DLA packaging requirements and be physically marked per RQ017, including identification in accordance with MIL-STD-130N paragraph 4.1.b(2), in addition to manufacturer logos, lot numbers, and material identifiers. Government identification must be removed from non-accepted supplies as per RQ011. Sampling and inspection adhere to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with verification levels assigned as VII, IV, and II for critical, major, and minor attributes respectively, or AQLs of 0.1, 1.0, and 4.0. Unspecified attributes are treated as major. Manufacturers may choose between attribute or variable inspection under MIL-STD-1916, and while MIL-STD-105/ASQ Z1.4 may determine sample size, acceptance requires zero non-conformances unless otherwise stated. Dimensional conformity for all Class 3A and 3B threads must be verified using System 22 of FED-STD-H28/20, excluding self-locking nuts and threads below specified diameters. The solicitation, issued under SPE4A6-26-T-10PH on July 30, 2026, with a response deadline of August 7, 2026, is managed by the Department of Defense’s ASC Commodities Division, with performance required in Houston, Texas, and primary contact information provided for inquiries.