SCREW, MACHINE

The contract specifies the procurement of a machine screw identified by NSN 5305-01-014-8465 and part number NAS4003 Rev 13, manufactured to the standard NAS6000 through 6003 Rev 4, and classified as a commercial item. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with governing revisions determined by the solicitation or award date. All threads classified as 3A or 3B must be inspected for dimensional conformance per FED-STD-H28/20 System 22, excluding self-locking nuts and threads below specified diameters. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and inspection levels align with critical, major, and minor attributes at verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Identification markings must adhere to MIL-STD-130N paragraph 4.1.b(2), in addition to manufacturer logos, lot numbers, and material markings. Packaging must meet ASTM D3951 and be labeled and marked per MIL-STD-129, with palletization following DLA packaging requirements. The quantity is 149 units, with a delivery deadline of 74 days, FOB origin, and inspection and acceptance occurring at destination. The unit of issue is each, priced at $149.00 per unit, with no variance allowed in quantity. The delivery address is Tinker AFB, Oklahoma, with the required ship date set for July 20, 2026, and the original required delivery date of November 29, 2026. All transportation procedures must comply with DLAD Proc Notes C19 and C20.