Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SCREW, MACHINE

Active
SPE4A0-26-T-4088Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a machine screw with part number 12542766 and NSN 5305-01-716-2546, requiring exactly three units delivered within five days of order placement under solicitation SPE4A0-26-T-4088. The item is source-controlled and must be manufactured and tested in accordance with limited rights data that only approved vendors possess; vendors without direct access to this data or traceability to approved sources are not eligible to quote. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking adhering to MIL-STD-129 and no special marking code. The screw is not subject to shelf life restrictions, and item unique identification is explicitly waived per DFARS 252.211-7003(c)(1)(i). Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, with verification levels assigned as VII, IV, and II for critical, major, and minor attributes respectively. Delivery is FOB origin to a U.S. military installation in Dongducheon, South Korea, with inspection and acceptance occurring at the destination. All supplies must be palletized per DLA guidelines, and shipping is governed by specific DLA procedures C19 and C20. The supplier must be source-approved, and a SAR package is required for new vendors seeking approval. The original required delivery date is July 24, 2026, with the solicitation posted on July 29, 2026, and responses due by August 6, 2026.

General Info

Three machine screws, NSN 5305-01-716-2546, delivered FOB origin to South Korea by July 24, 2026, source-controlled, MIL-STD compliant.

Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
Danita Davis
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SCREW,MACHINE
SCREW,MACHINE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
THIS IS A SOURCE CONTROLLED ITEM WHICH MUST BE
MANUFACTURED AND TESTED IN ACCORDANCE WITH THE
CITED LIMITED RIGHTS DATA. THE GOVERNMENT CAN
NOT PROVIDE THE DATA. ONLY THOSE VENDORS WHO
HAVE ACCESS TO THE DATA OR CAN PROVIDE TRACE
ABILITY TO THE APPROVED SOURCES SHOULD QUOTE.
SAR PACKAGE IS REQUIRED IF YOUR COMPANY IS
CONSIDERING SOURCE APPROVAL.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
BEE INDUSTRIES 7V765 P/N 12542766
TDP Rev A Gen 1 IAW BASIC DRAWING NR 19207 12542766 REVISION NR A DTD 11/01/2024 PART PIECE NUMBER: 12542766
SPE4A0-26-T-4088
SECTION B
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19207 12424710 REVISION NR A DTD 10/25/2011 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19207 12542766 REVISION NR DTD 06/17/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017623004 0001 EA 3.000
NSN/MATERIAL:5305017162546
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BL OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:080
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
WT4KDV
0061 OD CO SUPPORT MAINTEN
AWCF SSF
BLDG 770 CAMP CASEY
DONGDUCHEON 11310
KR
RDD 999/NMCS SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SPE4A0-26-T-4088
SECTION B
PR: 7017623004 PRLI: 0001 CONT’D
WT4KDV
0061 OD CO SUPPORT MAINTEN
AWCF SSF
BLDG 770 CAMP CASEY
DONGDUCHEON 11310
KR
MARKFOR
WT4KDV
0061 OD CO SUPPORT MAINTEN
AWCF SSF
BLDG 770 CAMP CASEY
DONGDUCHEON 11310
KR
M/F: (TCN) WT4KDV62020422
RDD: 999
PROJ: 9GD TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A01 DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/24/2026
SPE4A0-26-T-4088 NSN/Part Number: 5305-01-716-2546 Quantity: 3 EA Purchase Request: 7017623004QTY: 3 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
Precision Fastener Manufacturing – Flat WashersThe contract mandates the manufacture of 950 flat washers per delivery order in full compliance with NSN 5310-01-532-5236 specifications, requiring strict adherence to defined material composition, dimensional tolerances, and surface finish requirements. All production must meet the technical and quality standards established by the Defense Logistics Agency, ensuring every component is manufactured to military-grade precision and reliability. The scope is focused exclusively on producing these washers under a subcontract arrangement, with no flexibility in design or material substitution. This is a total small business set-aside under the Small Business Administration guidelines, specifically designated for businesses classified under NAICS code 332722, which covers screw, nut, and bolt manufacturing. The solicitation was posted on July 29, 2026, with a response deadline of August 12, 2026, and is managed by the ASC Commodities Division under the Department of Defense. Performance is expected to align with DLA’s logistical and quality assurance frameworks, though the precise delivery location is unspecified. Bidders must be certified small businesses eligible under FAR 19.5 to qualify for award.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-10GA
The contract pertains to the supply of 167 machine bolts identified by NSN 5306-01-096-5593 under solicitation SPE4A6-26-T-10GA, a HUBZone set-aside issued by the Department of Defense’s ASC Commodities Division. Delivery is due in 559 days from award, and the contractor is required to perform first article testing on one unit of the item, submitting a formal test report within 60 calendar days of contract execution. The contractor must provide written notice at least 14 days before shipping the tested unit for government final acceptance testing and ensure all documentation—including test results, material certifications, and manufacturing drawings—is included with the submission. The government has 60 days after receiving the report to approve, conditionally approve, or disapprove the first article. Production lot testing follows first article approval, requiring the contractor to deliver one randomly selected sample from the production lot to the Redstone Technical Test Center under strict labeling and documentation requirements, including signed forms, traceable shipping records, and a prepaid return label. The contractor must also account for and price the cost of samples consumed during government testing. The contract prohibits Fast Pay terms and mandates that all testing, inspection, and documentation comply with FAR 52.209-3 and its alternate clause, as well as specific procurement notes referencing supplemental first article and production lot testing protocols. Shipment of production samples must be clearly marked, accompanied by full technical and quality assurance records, and delivered to the designated government testing facility. The contractor is responsible for asserting proprietary rights on documentation and ensuring all material and process certifications are current and accurate. The solicitation requires disclosure of the current dealer or distributor and their certification status, emphasizing compliance with equivalent standards. The point of contact for inquiries is Tyler Greene, and the contract is subject to government oversight through the Quality Assurance Representative. All activities must align with the technical data package and applicable military standards including MIL STD 129 for labeling.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
CAP, FILLER OPENING
Solicitation # SPE7L1-26-T-889U
The contract pertains to the procurement of a CAP, FILLER OPENING with NSN 5340-01-371-2617 and part number 695155-1, under solicitation SPE7L1-26-T-889U, with a total quantity of 13 units to be delivered in 161 days from the award date, with delivery terms FOB origin and inspection and acceptance points at the destination. The item is classified as a commercial item, and unit identification is not required per DFARS 252.211-7003(c)(1)(i). Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be classified as VII, IV, and II for critical, major, and minor respectively, with unspecified attributes treated as major. The supplier must meet all applicable DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede other standards like ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and with RP001 for DLA packaging, requiring commercial packaging under ASTM D3951 unless the item is hazardous under FED-STD-313, in which case IP025 applies. Palletization must follow DLA guidelines, and the delivery address is DLA Distribution Warner Robbins, Robins AFB, GA. The contract is a total small business set-aside under NAICS code 332722, with a response deadline of August 10, 2026, and the required ship date is January 19, 2027. Documentation for source approval must be submitted per RC001, and all technical, quality, and packaging requirements are binding and take precedence over any conflicting commercial standards.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
SCREW, TAPPING
Solicitation # SPE7LX-26-U-9079
This contract specifies the procurement of TAPPING SCREWS under NSN 5305-01-336-9467 with a total quantity of 48 packing units PG, each containing 50 screws, as defined by the updated unit of issue effective March 1, 2023. The item is identified by DAIMLER TRUCK NORTH AMERICA LLC part number 23-11657-306 and is being procured under solicitation SPE7LX-26-U-9079 as a Total Small Business Set-Aside. Delivery is required within 90 days FOB origin with no variance permitted in quantity and inspection and acceptance to occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific methods for preservation, wrapping, and intermediate containment, with marking conforming to MIL-STD-129 and no special marking codes applied. Sampling and verification protocols must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required for acceptance unless otherwise stated, and critical, major, and minor attributes must be assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The Certificate of Conformance procedure is authorized unless overridden by a Quality Assurance Letter of Instruction, and non-accepted supplies must have government identification removed. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation or award date depending on acquisition type.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
SETSCREW
Solicitation # SPE4A6-26-T-10FS
This contract specifies the procurement of a set screw with detailed technical and packaging requirements. The item is a steel screw with dimensions 0.500-13 UNC-2A x 1.500 LG, cataloged under NSN 5305002638388 and referenced by specification FF-S-200 and Revision E dated 04/03/2025. Two units are required under Purchase Request 7017673356, with delivery due in 20 days FOB origin, no variance allowed in quantity, and inspection and acceptance occurring at the point of origin. Packaging must comply with MIL-STD-2073-1E, including preservation method 10, dry conditions, and packaging level B, with marking adhering strictly to MIL-STD-129 and no special marking codes applied. Palletization must follow DLA packaging standards, and mercury or mercury-containing compounds are strictly prohibited in preservation, packaging, packing, and marking, with limited exceptions for functional applications like batteries or specialized instruments governed by NAVSEA 5100-003D, which also mandates shock-proof design and secondary containment for portable mercury-containing devices. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in sample lots unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively, or corresponding AQLs of 0.1, 1.0, and 4.0. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List, with the revision effective on the solicitation issue date controlling for simplified acquisitions. The item is to be delivered to the Ordnance Readiness Development Center in Jiji Township, Nantou County, Taiwan, with transportation governed by DLA procedural notes C19 and C20. The contract is issued under solicitation SPE4A6-26-T-10FS, with a response deadline of August 6, 2026, and the original required delivery date is August 3, 2026. Contract administration is managed by the Department of Defense’s ASC Commodities Division, with primary point of contact Daniel Fink.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT , SELF-LOCKING, PL
Solicitation # SPE4A0-26-T-4091
The contract specifies the procurement of two self-locking plate nuts, part number MS21060L6, with NSN 5310-00-779-6633, under solicitation SPE4A0-26-T-4091. These items are classified as critical application components and must comply with technical and quality standards referenced in the DLA Master List, including NASM21060 Revision 3 and NASM25027 Revision 1, with quality assurance provisions EQ003 and QAP-13873 governing inspection and verification. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be assessed at specified verification levels or AQLs. Packaging and marking are mandated to adhere to MIL-STD-2073-1E and MIL-STD-129, with prohibition of mercury or mercury compounds in all packaging operations. The items must be delivered FOB origin within five days, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Delivery is directed to Naval Air Station North Island in San Diego, California, with specific freight and parcel post instructions excluding parcel post in favor of traceable shipping methods. The contract includes detailed logistical parameters such as unit of issue, packaging codes, container specifications, and identification codes for government use. The required delivery date is May 14, 2026, and the contract was posted with a response deadline of August 6, 2026. The purchasing organization is the Department of Defense’s Aviation Supply Chain ESOc Buys, coordinated by Danita Davis, and the procurement falls under NAICS code 332722 for screw machine product manufacturing. All items must meet DLA packaging requirements RP001 and special marking conditions indicate no additional special markings are required.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, CASTLE
Solicitation # SPE7LX-26-U-9076
This contract pertains to the procurement of NUT, CASTLE with NSN 5310011547683 and part number 10501146, under solicitation SPE7LX-26-U-9076, issued by the Department of Defense’s Strategic Acquisition Program Directorate. A total quantity of 252 units is required at a unit price of $252.00, with a total contract value of $63,504, delivered FOB origin within 108 days. The items are subject to strict packaging standards per ASTM D3951 and MIL-STD-129, with palletization conforming to DLA’s packaging requirements, and all technical and quality specifications referenced via the DLA Master List of Technical and Quality Requirements must be followed, superseding any conflicting standards. Critical application status applies, and no ozone-depleting chemicals may be used in manufacturing or packaging, with substitutes needing prior approval unless explicitly authorized by the specification. The contract prohibits any variance in quantity—zero percent plus or minus—and inspection and acceptance both occur at the destination. The unit of issue is each (EA), and packaging must reflect the specified unit of issue and quantity per unit pack as outlined in the contract. This solicitation is classified as a DLA Direct, CONUS procurement, with the government reserving the right to adjust purchase quantities and not guaranteeing full procurement by the IDC. All markings, labeling, and documentation must comply with federal procurement directives, including the removal of government identification from non-accepted supplies. The point of contact for inquiries is Theodore Misiolek, with responses due by August 13, 2026. The purchase request number is 1000237130, and the NSN and part number must be used consistently in all shipping and documentation.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-10HQ
The contract pertains to the procurement of 1,422 units of PIN-RIVET with NSN 5320-01-547-4936 under solicitation SPE4A6-26-T-10HQ, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 38 days of award, with performance occurring in New Cumberland, Pennsylvania, zip code 17070-5002. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons, including foreign nationals within the U.S., and requires contractors to hold JCP certification, complete mandatory training, and receive DLA approval to access controlled data. DFARS 252.225-7048 applies to all export-controlled technical data associated with this item. Documentation requirements for source approval requests and government identification removal procedures for non-accepted supplies are also in effect, and covered defense information protocols must be adhered to. The solicitation closed on August 6, 2026, with Michael Jefferson listed as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-R-XB14
The contract solicitation SPE4A6-26-R-XB14 is for the procurement of 950 flat washers identified by NSN 5310-01-532-5236 under a Firm Fixed Price arrangement with a 190-day delivery requirement after order date. The item is classified as a commercial item and subject to a Total Small Business Set-Aside, with a contract ceiling of $350,000 over the five-year term. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, which supersedes all other standards including ASTM D3951 for packaging. The washers must be physically identified and marked per RQ017 and packaged in accordance with RP001 and MIL-STD-129, including palletization and labeling requirements. Sampling for acceptance must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, with verification levels and AQLs defined per critical, major, and minor attributes. Inspection and acceptance occur at destination, with FOB origin placing delivery risk on the contractor until receipt. The contract mandates adherence to multiple federal and defense regulations including prohibitions on hexavalent chromium, Buy American provisions, restrictions on certain minerals and magnets, and sustainable product requirements. Cybersecurity obligations under DFARS 252.204-7012 require NIST SP 800-171 compliance, a System Security Plan, and reporting through the DIBNet portal for any cyber incidents, with flow-down requirements to all subcontractors. Pricing is unestablished and to be submitted by offerors, with payment processed exclusively through WAWF using electronic invoicing. The solicitation requires certified representations regarding small business status, UEI and CAGE codes, and disclosures related to tax liabilities, foreign ownership, and controlled telecommunications equipment, with award determined through a trade-off process that prioritizes past performance alongside price and other non-price factors.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
SPRING-ASSIST, HOOD
Solicitation # SPE7LX-26-U-9073
The contract is for 461 units of a Spring-Assist Hood under NSN 5340-01-603-1531, with a delivery deadline of 116 days after order. It is a total small business set-aside solicitation issued by the Department of Defense’s Strategic Acquiring Program Directorate, with the solicitation number SPE7LX-26-U-9073 and NAICS code 332722. The solicitation was posted on July 29, 2026, and responses are due by August 13, 2026. Technical and quality requirements referenced in this procurement are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Packaging must comply with DLA standards, and any non-accepted supplies must have all government identification removed prior to return. The primary point of contact is Theodore Misiolek, reachable via email and phone, and the procurement is administered through the DIBBS platform.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
BUSHING
Solicitation # SPE4A6-26-T-10GT
Offerors must comply with strict restrictions on telecommunications equipment and domestic sourcing, certifying that no covered telecommunications gear or services from prohibited foreign sources will be provided under this solicitation. The Berry Amendment applies with a reduced threshold of $150,000, requiring full disclosure of any non-domestic materials and adherence to DFARS clauses 252.225-7006, 252.225-7012, and 252.225-7015. Small business joint ventures must submit mandatory representations for eligible categories including small business, service-disabled veteran-owned, women-owned, economically disadvantaged women-owned, and HUBZone status. Additive manufacturing is prohibited unless explicitly approved by the contracting officer, and offers containing AM-produced items will be deemed non-responsive. Due to high variability in demand, vendors are strongly encouraged to quote quantity ranges to enable flexible award adjustments without administrative delays, though this does not apply to Auto IDC. All contractors must register via DLA’s AMPS system within two months to gain access to the Vendor Shipment Module and continue shipping; VSM WebServices users must implement schema updates by the specified deadline or lose functionality. Offers submitted after the closing date must include a “No Bid” entry on DIBBS with an anticipated quote date or reason for non-response to avoid misleading buyers. The solicitation prohibits Fast Pay provisions, and the specific item required is one bushing with NSN 5365-00-076-9842 for delivery within five days to St. Augustine, Florida, with Kameron Heningburg as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, KEY
Solicitation # SPE4A0-26-T-4085
The contract pertains to the procurement of one washer, key, identified by NSN 5310-01-285-5607 and multiple part numbers including 035051008AB, 35051-8-AB, and 801627-099-31C, supplied by Reliance Electric Company DBA 71956. The item is designated as a critical application item and must comply with stringent technical and quality requirements referenced via the DLA Master List of Technical and Quality Requirements, which supersede all other standards. Physical identification and bare item marking are mandatory as per RQ017, and packaging must adhere to ASTM D3951 while fully complying with MIL-STD-129 labeling and RP001 DLA packaging standards, including palletization. Sampling for inspection follows MIL-STD-1916 or ASQ H1331 with a zero-defect acceptance criterion unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. Delivery is due within five days FOB destination to FPO AP 96349, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must reflect the specified unit of issue and quantity per unit pack. The contract is governed by the DLA acquisition system with compliance to federal procurement protocols, including freight shipping instructions, transportation protocols, and government-specific identification codes. The original required delivery date is July 24, 2026, with a solicitations response deadline of August 6, 2026, issued under contract number SPE4A0-26-T-4085 by the Department of Defense through the Aviation Supply Chain ESOC Buys unit.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A0-26-T-4084
This contract pertains to a special-purpose electrical cable assembly identified by part number A14G2816-1 and NSN 6150015153470, required in a quantity of one unit with strict delivery terms of five days from the order. The item is designated as a critical application for Boeing and is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which governs compliance for both manufacturers and non-manufacturers. Quality assurance mandates adherence to ISO 9001:2015 along with tailored higher-level requirements, and all supplies must be marked in accordance with MIL-STD-129 and DLA packaging standards, though government identification must be removed from non-accepted items. Sampling follows MIL-STD-1916 or an equivalent zero-based plan with zero non-conformances permitted unless otherwise stipulated, and attributes are assigned verification levels or AQLs based on their classification. Unit of issue is each, and delivery is FOB origin with inspection and acceptance occurring at the destination. Packaging complies with MIL-STD-2073-1E, with specific methods for preservation, wrapping, and containerization outlined, and palletization must meet DLA procurement guidelines. The item is not required to bear Item Unique Identification as per customer request. Shipment must be sent by the fastest traceable means, explicitly excluding parcel post, to the specified joint base address. The contract is linked to purchase request 7017554637 and has a required delivery date of July 21, 2026, with the solicitation closing on August 6, 2026, under the NAICS code 334419 and managed by the Department of Defense’s Aviation Supply Chain ESOC.
Other Electronic Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE4A0-26-T-4089
The contract specifies the procurement of a PIN, STRAIGHT, HEADED item with NSN 5315-01-537-0276 and quantity of one unit, to be delivered FOB origin within five days of contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with revisions controlled by the solicitation issue date or award date depending on acquisition size. The item is classified as a critical application and must conform to specified technical data packages and drawings dated through November 2024. Physical identification is required per RQ017 but item unique identification is waived per DFARS 252.211-7003(c)(1)(i). Quality requirements include non-tailored ISO 9001:2015 compliance alongside tailored higher-level quality provisions, and inspection and acceptance occur at origin. Sampling must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with acceptance criteria of zero non-conformances unless otherwise stated. Packaging must adhere to MIL-STD-129 and ASTM D3951, with palletization following DLA packaging directives. The item must be marked and labeled per contractual specifications, and the sole delivery destination is Storck Barracks Building 6503 in Illesheim, Germany. The certificate of conformance is authorized unless explicitly withheld, and all packaging and marking must reflect the designated unit of issue and quantity per unit pack as defined in the contract. The purchase request number is 7017622999, with an original required delivery date of July 24, 2026, and the solicitation was posted on July 29, 2026, with a response deadline of August 6, 2026.
Hardware Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
PIN, DRIVE, GUIDED
Solicitation # SPE4A0-26-T-4093
The contract issued by the Defense Logistics Agency under solicitation number SPE4A0-26-T-4093 seeks two guided pin and drive units identified by NSN 5315-01-380-5136, with delivery required within five days after delivery order issuance. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. The supplier must comply with DLA packaging standards and adhere to strict configuration change management protocols, including formal engineering change proposal procedures and variance requests for any deviations. Cybersecurity requirements mandate CMMC Level 2 certification through an approved third-party assessment organization, and all contractors handling technical data must be vetted under the US/Canada Joint Certification Program, trained on proper handling of DOD export-controlled information, and authorized by DLA to access controlled data. The technical data associated with this item is subject to ITAR or EAR export controls, restricting disclosure to foreign persons regardless of location, and DFARS 252.225-7048 applies. Item unique identification is not required per customer request, and government identification must be removed from non-accepted supplies. The place of performance is FPO, ZIP 96675, with Danita Davis as the primary point of contact, and responses are due by August 6, 2026.
Hardware Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
INDICATOR, SIGHT, LIQ
Solicitation # SPE4A0-26-T-4095
The contract pertains to the procurement of one unit of an Indicator, Sight, Liqui, with part number 6680-01-533-9817, supplied by ERNST JOHN C & CO INC under purchase request 7017493599. Delivery is required within five days of award, FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the point of origin, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, including palletization per DLA packaging requirements. No special marking is required, and the item does not have a shelf life. The material is not classified as hazardous, with mercury and mercury-containing compounds explicitly prohibited from intentional addition or direct contact with the item, except for functional uses in batteries, sensors, or specific instruments as defined by NAVSEA, and portable devices must include a secondary containment. Sampling must follow MIL-STD-1916 or an equivalent zero-based plan, with verification levels assigned per critical, major, and minor attributes, and acceptance requires zero non-conformances unless otherwise specified. The item is not subject to Unique Item Identification, and a Safety Data Sheet is not required. The shipment must be dispatched via a traceable method, excluding parcel post, to the designated delivery point at Fort Campbell, Kentucky. The contract references the DLA Master List of Technical and Quality Requirements, and all technical and quality specifications are incorporated by reference. The solicitation was issued on July 29, 2026, with a response deadline of August 6, 2026, and the required delivery date is July 15, 2026.
Other Measuring and Controlling Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 213113
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A0-26-T-4086
The contract specifies the procurement of two quick release pins identified by NSN 5315-01-494-3040, each priced at $2.00, with a total value of $4.00, delivered FOB origin within five days of order placement with zero tolerance for quantity variance. The item must conform to the current revision of the non-government standard NASM14531 and related standards NAS1322 through NAS1326, and any hardware manufactured after the solicitation date must meet the latest revision of these standards. Inspection and acceptance occur at origin, with sampling required to follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise defined, and critical attributes must be verified at Level VII or with an AQL of 0.1. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization strictly following DLA Packaging Requirements, and all DLA Master List technical and quality requirements supersede ASTM standards. The pins are destined for two locations: Marine Corps Forces Central Command at MacDill AFB, Florida, and Fleet Readiness Center West in Lemoore, California, with both shipments requiring fastest traceable transport and prohibiting parcel post. Delivery is due by July 24 and July 28, 2026, respectively, under solicitation SPE4A0-26-T-4086, with the point of contact being Danita Davis of the Department of Defense’s Aviation Supply Chain ESOC.
Support Activities for Coal Mining

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HE
Solicitation # SPE4A0-26-T-4094
The item is a socket head cap screw identified by NSN 5305-01-551-6596, with a required quantity of six units, under purchase request 7017623167, and must be delivered within five days of award. The solicitation is issued by the Defense Logistics Agency under number SPE4A0-26-T-4094, with a response deadline of August 6, 2026, and is classified under NAICS code 332722. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA standards, and all non-accepted supplies must have government identification removed. The item itself requires physical identification or bare item marking. This item includes technical data subject to U.S. export controls under ITAR or EAR, making any disclosure or transfer to foreign persons—regardless of location—restricted without prior authorization. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with active JCP certification, completed export control training, and approved access through the DLA questionnaire are permitted to handle this technical data.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A0-26-T-4087
The contract pertains to the procurement of one machine bolt identified by NSN 5306-01-699-5097 and part number B18.24-2004, complying with the technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, which override any other specifications including ASTM D3951. The item must be manufactured in accordance with ANSI B18.24A Revision A dated 01/01/2006 and inspected using MIL-STD-1916 or ASQ H1331 Table 1 sampling methods, with zero non-conformances required unless otherwise stated. Critical, major, and minor attributes are to be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0. All packaging must adhere to MIL-STD-129 and DLA Packaging Requirements for Procurement, with no government identification removed from non-accepted supplies. The unit of issue is EA, with exact quantity delivery required and no variance permitted. Delivery is FOB origin, with inspection and acceptance occurring at the destination. The item must be delivered within five days of order and shipped using traceable means, excluding parcel post, to the designated military address at Fort Bliss, Texas. The shipment is designated as RDD NMCS and linked to project TP 1 and supplier code W9046W. The contract number is SPE4A0-26-T-4087, with a required delivery date of July 24, 2026, and the point of contact is Danita Davis of the Department of Defense’s Aviation Supply Chain ESOC Buys office.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, BARRE
Solicitation # SPE4A0-26-T-4092
Offerors must comply with strict domestic sourcing requirements under the Berry Amendment and Buy American Act, with thresholds now set at $150,000, and must disclose any non-domestic materials in their quotations. The use of covered telecommunications equipment or services is prohibited, and offerors must affirm compliance with FAR 52.204-24 and DFARS 252.204-7016. Small business joint ventures must submit required representations for eligibility under specific small business categories. Quantity ranges are strongly encouraged due to fluctuating demand, as manual evaluation allows buyers to consolidate or adjust quantities without administrative delays, though this does not apply to Auto IDC. The submission of a “No Bid” on DIBBS is advised if quoting after the closing date to prevent assumptions of non-procurability. All contractors must register via DLA’s AMPS system within two months to access the Vendor Shipment Module and continue shipping; those using VSM WebServices must update their internal schema by April 23, 2025. Additive manufacturing is prohibited unless specifically approved by the contracting officer. The solicitation seeks 4 self-locking barrel nuts under NSN 5310-01-061-3323 for delivery within five days, with a solicitation number SPE4A0-26-T-4092 and response deadline of August 6, 2026. Fast Pay is not applicable, and APEX Accelerators are available to support businesses seeking government contracting assistance.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A0-26-T-4083
This contract pertains to the procurement of a single special-purpose electrical cable assembly identified by part number WR-MC-0596 and NSN 5995-01-615-6091, with a unit quantity of one and a total price of one dollar. The item must be delivered within five days of contract award, FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific packaging methods, materials, and unit containers. Marking follows MIL-STD-129 with no special marking codes, and palletization adheres to DLA standards. The shipment requires traceable transport methods and prohibits parcel post, with designated freight and recipient addresses in Jackson, Georgia. Regulatory compliance includes incorporation of technical and quality requirements from the DLA Master List, adherence to CMMC Level 2 self-assessment, and sampling protocols aligned with MIL-STD-1916 or ASQ H1331, enforcing zero non-conformances unless otherwise specified. Government identification must be removed from non-accepted supplies, and cybersecurity and quality controls are strictly enforced under federal acquisition directives. The solicitation number SPE4A0-26-T-4083 has a required delivery date of July 20, 2026, and was posted on July 29, 2026, with a response deadline of August 6, 2026.
Other Electronic Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 312230
New
DIBBS
Military Packaging and Marking ServicesThe contract requires the provision of unit and shipment-level packaging and marking services strictly in accordance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all items are properly labeled with required CAGE codes, part numbers, and lot or serial numbers to meet military logistics specifications. The work must support accurate identification, tracking, and handling of military supplies throughout the supply chain, with full compliance being mandatory for all packaging and marking activities. This subcontract is issued under NAICS code 312230 and is managed by the Department of Defense through the AVIATION SUPPLY CHAIN ESOC BUYS organization. The place of performance is designated as FPO with the zip code 09645-1926, indicating operations are likely oriented toward overseas or mobile military units. The solicitation was posted on July 28, 2026, with responses due by August 5, 2026, and interested parties must submit proposals within this window. The contract is not subject to any specific set-aside classification and is accessible via the DIBBS procurement portal.
Tobacco Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details