Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SCREW, MACHINE

Active
SPE4A6-26-T-05RMFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of 20 machine screws with part number BACS12HL3A12 and NSN 5305-01-649-4777 under solicitation SPE4A6-26-T-05RM, with delivery required within 21 days to the DLA Distribution facility in New Cumberland, Pennsylvania, on or before June 11, 2026. The item is classified as a critical application requiring FAA airworthiness approval, and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances required unless otherwise stated. Configuration changes must be managed through engineering change proposals, and the contractor must retain full supply chain traceability documentation per DLA Directive Procurement Note C03. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 marking requirements, with no special marking needed, and palletization must meet DLA packaging standards. Inspection and acceptance occur at destination, with zero variance permitted in quantity. The contract references the DLA Procurement Notes C19 and C20 for transportation protocols. The supplier, SPS Technologies, LLC, is subject to all technical data package requirements, including QAP 13873 revision B, and must comply with the prescribed unit of issue and contract delivery terms.

General Info

20 machine screws, BACS12HL3A12, FAA-approved, deliver to New Cumberland by June 11, 2026, zero non-conformances, strict traceability and packaging standards.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-05RM DLA Aviation Jul 14 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
JUSTIN LALUMONDIER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SCREW,MACHINE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. RQ019: Federal Aviation Administration (FAA) Airworthiness Approval
CRITICAL APPLICATION ITEM
SPS TECHNOLOGIES, LLC 06725 P/N BACS12HL3A12
TDP Rev B Gen 2 IAW REFERENCE QAP 13873 CDRL-FAACERTCOM-25015 REVISION NR DTD 01/14/2025 PART PIECE NUMBER:
SPE4A6-26-T-05RM
SECTION B
PR: 7015537019 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7015537019 0001 EA 20.000
NSN/MATERIAL:5305016494777
DELIVERY (IN DAYS):0021
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BL OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:06/11/2026
SPE4A6-26-T-05RM
SECTION B
PR: 7015537019 PRLI: 0001 CONT’D
Original Required Delivery Date:06/11/2026
SPE4A6-26-T-05RM NSN/Part Number: 5305-01-649-4777 Quantity: 20 EA Purchase Request: 7015537019QTY: 20 Delivery: 21 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, PLThe contract is for 199 self-locking nuts, part number HS4482-02-6, with NSN 5310-01-185-9152, specified as a critical application item for the U.S. Department of Defense. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation issuance or award date depending on acquisition size, and take precedence over all other standards. Packaging and marking must conform to MIL-STD-129 and ASTM D3951, with palletization strictly following DLA’s RP001 requirements. Sampling and inspection are to follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The item must be physically identified per RQ017 and government identification removed from non-accepted supplies per RQ011. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the full quantity must be delivered with no variance allowed. The item must be delivered within 88 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of October 18, 2026. The contract is under solicitation SPE4A6-26-T-05QM, issued by the ASC Commodities Division, and adheres to DoD unit of issue standards with the purchase request number 7016437885.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLATThe contract solicits two flat washers with NSN 5310-01-661-3003 under solicitation number SPE4A6-26-T-02PG, with a delivery requirement of 20 days after award. The item is subject to stringent technical and quality requirements tied to the DLA Master List of Technical and Quality Requirements, including packaging standards, export control protocols, and physical marking specifications. Technical data associated with the item is controlled under either ITAR or EAR, restricting its dissemination to authorized entities only, requiring contractors to hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and receive formal approval from DLA to access the data. DFARS 252.225-7048 governs the handling of this controlled technical information, and the requirement applies universally to all entities, including foreign nationals and subsidiaries. The contract also incorporates CMMC Level 2 certification as a mandatory condition for third-party assessment organizations involved. The place of performance is specified as Camp Pendleton, California, and the procuring activity is the ASC Commodities Division under the Department of Defense, with Ashley Jones listed as the primary point of contact. The solicitation closed on July 16, 2026, with a NAICS code of 332722 for machine shop work.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
NUT, SLEEVEThis solicitation, SPE4A6-26-T-05SW, seeks quotations for a sleeve nut with NSN 5310-00-574-9544, quantity 127 units, with a delivery requirement of 116 days after award. Offerors must comply with strict domestic sourcing regulations including the Berry Amendment and Buy American Act, with the Berry Amendment threshold set at $150,000, requiring full disclosure of any non-domestic materials and adherence to applicable DFARS clauses. Fast Pay is not applicable. Due to fluctuating demand, offerors are strongly encouraged to provide quantity ranges to facilitate award flexibility without re-solicitation, though this does not apply to Auto IDC. No bids must be submitted via DIBBS with a “No Bid” type if quoting after the closing date, to avoid assumptions of non-responsiveness. The offeror must certify that it will not provide covered telecommunications equipment or services as defined under FAR 52.204-24 and DFARS 252.204-7016. Small business joint ventures must submit required certifications for eligibility under SDVOSB, WOSB, EDWOSB, or HUBZone categories. Additive manufacturing components are prohibited unless pre-approved by the contracting officer. All vendors must register via DLA’s Account Management & Provisioning System (AMPS) within two months to maintain access to the Vendor Shipment Module and continue shipping to DLA, with WebServices users required to update their schema by the specified deadline. Failure to comply with AMPS registration or schema updates will result in loss of shipping privileges. The solicitation is set aside for Service-Disabled Veteran-Owned Small Businesses and includes contact information for the sole point of contact, Nyjel Knowlin, and the place of performance at Tinker AFB, Oklahoma.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEThe item is a self-locking nut designated by NSN 5310-01-439-5878 with a quantity of 48 units, solicited under contract number SPE4A6-26-T-05RD with a response deadline of July 21, 2026, and an anticipated delivery date 130 days after order. The solicitation is issued by the ASC Commodities Division under the Department of Defense, with performance located in Tracy, California. Technical data associated with this item is subject to export controls under either ITAR or EAR, requiring prior authorization from the Department of State or the Department of Commerce for any disclosure to foreign persons, regardless of location. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on handling DOD export-controlled technical data, and approved access via the DLA questionnaire may receive such data. Packaging and quality conformance must meet DLA requirements, and any violation of export control provisions may result in severe penalties.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, RECESSEDThe contract is for the procurement of 9,139 units of a recessed washer identified by NSN 5310-01-120-8196, with a unit of issue in each. Delivery is required in 129 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must comply with strict packaging standards per MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container types, with marking requirements adhering to MIL-STD-129 and no special marking codes applied. All packaging must meet DLA’s procedural requirements outlined in RP001, and palletization is governed by the same guidelines. The item is classified as a critical application and must conform to technical specifications referenced in NASM14177 Revision 2 and FF-W-92C(3) Revision C, with part number MS14177-8. Sampling and quality verification follow MIL-STD-1916 or equivalent zero-based plans, with critical attributes requiring a verification level of VII or AQL of 0.1, and unspecified attributes defaulted to major level. The item is subject to removal of government identification if not accepted, and transportation logistics are governed by DLAD procedural notes C19 and C20. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of November 28, 2026 and an original delivery deadline of January 6, 2027. The solicitation, issued under SPE4A6-26-T-05RK, was posted on July 13, 2026, with responses due by July 21, 2026, and falls under a Small Business Administration set-aside with NAICS code 332722, administered by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details