Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SCREW, MACHINE

Active
SPE7M1-26-T-204XFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 24 machine screws identified by NSN 5305016279951 and part number 106-0345 from Portland Valve LLC, with a unit price of $24.00 and a total contract value of $576.00. Delivery is required within 237 days FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The screws must be packaged in strict compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, with no special marking required. Packaging must adhere to DLA’s procurement requirements, including intermediate containment and labeling standards, and the shipment is directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract prohibits the intentional use of mercury or mercury-containing compounds in the hardware, except for specified functional applications approved by NAVSEA, and mandates a secondary containment for any permitted mercury-containing components such as portable lamps or instruments. The solicitation number SPE7M1-26-T-204X was issued on July 12, 2026, with responses due by July 23, 2026, under a federal procurement authorized under NAICS code 332722. The contracting activity falls under the Department of Defense’s Maritime Supply Chain office, with Michael Reese listed as the point of contact. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition scale. Transportation instructions follow DLA procedural notes C19 and C20. The original required delivery date was January 18, 2027, and the needed ship date is March 18, 2027. All units of issue and purchase are aligned with DoD standards, and proper labeling and delivery protocols must be followed to ensure compliance with federal procurement procedures.

General Info

Procure 24 machine screws at $24 each, deliver by March 18, 2027, to New Cumberland, PA, per MIL-STD and DLA specs.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M1-26-T-204X July 13, 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Michael Reese
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SCREW,MACHINE
SCREW,MACHINE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
PORTLAND VALVE LLC 53154 P/N 106-0345
PORTLAND VALVE LLC 53154 P/N 506-3000 PC NO 42
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017439231 0001 EA 24.000
NSN/MATERIAL:5305016279951
DELIVERY (IN DAYS):0237
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE7M1-26-T-204X
SECTION B
PR: 7017439231 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:03/18/2027 Original Required Delivery Date:01/18/2027
SPE7M1-26-T-204X NSN/Part Number: 5305-01-627-9951 Quantity: 24 EA Purchase Request: 7017439231QTY: 24 Delivery: 237 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
BOLT, SHOULDERThe contract pertains to the procurement of a shoulder bolt identified by part number NAS1160A6-43 and NSN 5306017307807, with a quantity of one unit to be delivered under solicitation SPE4A6-26-T-05KK. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R or I identifiers, with compliance tied to the revision in effect on the solicitation or award date depending on acquisition size. The item must conform to non-government standard NAS1160 Revision 7 dated 03/31/2026 and adhere to strict packaging standards per MIL-STD-2073-1E with specific preservation methods, wrapping materials, and unit container types. Inspection and acceptance occur at origin, with sampling following MIL-STD-1916 or ASQ H1331 Table 1 or an equivalent zero-based plan, where specified attributes require verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required in sampling unless otherwise stated, and marking must comply with MIL-STD-129 without special codes. Packaging and palletization follow DLA’s procurement requirements, with delivery due in 120 days FOB origin, no tolerance for quantity variance, and shipment directed to DLA Distribution at New Cumberland, Pennsylvania. The required delivery date is April 9, 2026, with a need ship date of January 12, 2026. The contract is issued under the Department of Defense, managed by the ASC Commodities Division, with primary point of contact Sommer Yates.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Commercial Washer Supply (NSN 5310012030649)The contract calls for the supply of 81 commercial-grade washers identified by NSN 5310012030649 and part number 70361-25029-102, intended for critical applications requiring strict adherence to Department of Defense technical and quality standards. All units must meet the stringent requirements defined by the Defense Logistics Agency to ensure reliability and performance in demanding operational environments. The work is governed under NAICS code 332722, indicating the classification for laundry and dry-cleaning equipment manufacturing, and is structured as a subcontract award. The solicitation was posted on July 12, 2026, with a response deadline of July 20, 2026, providing a narrow window for qualified suppliers to submit proposals. The place of performance is specified as Tracy, California, with a ZIP code of 95304-5000, indicating where the delivered units must be shipped and accepted. The contract is managed by the ASC Commodities Division under the Department of Defense, and all submissions must be made through the designated DIBBS portal at the provided link to be considered valid. Any participant must ensure full compliance with DLA’s quality assurance protocols, as nonconforming deliveries will be rejected.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HThe contract pertains to the procurement of two hexagon cap screws identified by part number 23-09744-150 from Daimler Truck North America LLC and NSN 5305-01-328-4387, classified as a commercial off-the-shelf item. The screws must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0, respectively, while unspecified attributes are treated as major, and acceptance requires zero non-conformances unless otherwise stipulated. Packaging must conform to MIL-STD-2073-1E with specific preservation methods, materials, and packaging codes, and marking must follow MIL-STD-129 with no special markings required. Palletization adheres to DLA packaging standards, and delivery is FOB origin within ten days to the specified destination in Mason City, Iowa. Shipment must be sent by the fastest traceable means, excluding parcel post, with the freight and delivery points identical and designated under RDD 555 and project TP 2. The contract specifies a fixed quantity of two units with zero variance allowed, inspection and acceptance occur at destination, and the original required delivery date is April 8, 2026. All requirements are subject to the governing revision of the DLA Master List as of the solicitation issue date.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
BOLT, EXTERNALLY RELThis contract pertains to the procurement of 25 externally relieved bolts with NSN 5306-01-714-1222 under solicitation SPE4A6-26-T-05MT, issued by the Defense Logistics Agency’s ASC Commodities Division. The requirement is subject to stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with compliance governed by the revision in effect on the solicitation issue date. The item is subject to export control under ITAR or EAR, restricting technical data sharing with foreign persons regardless of location, and necessitates prior authorization from the Department of State or Commerce. Contractors must hold an approved US/Canada Joint Certification Program status, complete mandatory DOD export control training, and pass the DLA Export-Controlled Technical Data Questionnaire to access controlled information. The contract includes mandatory compliance with DLA packaging standards, CMMC Level 2 certification for third-party assessors, and tailored quality requirements applicable to both manufacturers and non-manufacturers. Inspection and acceptance must occur at the origin, and non-accepted supplies must have all government identification removed prior to return. Physical identification and bare item marking are required, and the delivery must be completed within 33 days after award to the designated performance location in New Cumberland, PA. The solicitation was posted on July 12, 2026, with responses due by July 20, 2026, and is classified under NAICS code 332722. Primary point of contact is Monica Clark, with all inquiries directed to her provided email and phone number.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCKThe contract is for the procurement of 9 units of WASHER, LOCK with NSN 5310-01-147-3135 under solicitation SPE4A6-26-T-05JE, issued by the Department of Defense’s ASC Commodities Division. The item is supplied by TOGNUM AMERICA INC and ROLLS-ROYCE SOLUTIONS AMERICA INC with part number 5149532, and delivery is required within 20 days of contract award FOB origin with zero variance in quantity. Inspection and acceptance occur at the origin, and packaging must comply with MIL-STD-2073-1E, including packing code Q and level B, with marking per MIL-STD-129 and no special marking codes. All packaging and labeling must adhere to DLA packaging requirements, and palletization follows applicable DLA standards. The shipment is destined for the Ordnance Readiness Development Center in Jiji Township, Nantou County, Taiwan, with a required delivery date of July 15, 2026. Technical and quality requirements referenced by R and I numbers are defined in the DLA Master List of Technical and Quality Requirements, with sampling procedures governed by MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances unless otherwise stated. Attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. The unit of issue is EA with a unit price of $9.00 and total price of $81.00. The contract incorporates additional provisions for transportation, freight forwarding, and government use tags, and references DLA procedural notes for logistics details. The solicitation was posted on July 12, 2026, with responses due by July 20, 2026, and is classified under NAICS code 332722 for fastener manufacturing.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details