Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SCREW, MACHINE

Active
SPE4A0-26-T-3769Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to a single machine screw identified by NSN 5305-01-531-9934 with a quantity of one unit, issued under solicitation SPE4A0-26-T-3769 and requiring delivery within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed. The screw itself must be physically marked in accordance with bare item marking requirements. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated; attributes are classified with verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively. Export control restrictions apply due to the presence of technical data subject to ITAR or EAR regulations, prohibiting unauthorized disclosure to foreign persons, including those within the United States. Access to such data is restricted to DLA contractors with approved JCP certification, completed training on handling DOD export-controlled technical data, and formal authorization from the DLA. The solicitation was posted on July 13, 2026, with a response deadline of July 16, 2026, and the place of performance is Johnston, Iowa, under the oversight of the Department of Defense’s Aviation Supply Chain ESOC Buy office.

General Info

Procurement of single machine screw NSN 5305-01-531-9934 via DLA solicitation SPE4A0-26-T-3769, response deadline July 13, 2026.

Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

CP DODGE 7105 NW 70TH AVE 2322, JOHNSTON, IA, 50131-1824, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A0-26-T-3769 DLA Aviation Jul 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
Danita Davis
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SCREW,MACHINE
SCREW, MACHINE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been
SPE4A0-26-T-3769
SECTION B
approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5305-01-531-9934 Quantity: 1 EA Purchase Request: 7017321002QTY: 1 Delivery: 5 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, PLThe contract is for 199 self-locking nuts, part number HS4482-02-6, with NSN 5310-01-185-9152, specified as a critical application item for the U.S. Department of Defense. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation issuance or award date depending on acquisition size, and take precedence over all other standards. Packaging and marking must conform to MIL-STD-129 and ASTM D3951, with palletization strictly following DLA’s RP001 requirements. Sampling and inspection are to follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The item must be physically identified per RQ017 and government identification removed from non-accepted supplies per RQ011. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the full quantity must be delivered with no variance allowed. The item must be delivered within 88 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of October 18, 2026. The contract is under solicitation SPE4A6-26-T-05QM, issued by the ASC Commodities Division, and adheres to DoD unit of issue standards with the purchase request number 7016437885.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEADThe contract specifies the procurement of 50 units of a screw, cap, socket head with NSN 5305-01-169-7190 and part number 13075854 for Lockheed Martin Corp and Raloid Corporation, designated as a critical application item. Delivery is required in 210 days FOB origin with no variance in quantity allowed, and inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951 but is subordinate to the DLA Master List of Technical and Quality Requirements, which take precedence. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow DLA’s RP001 packaging requirements. The unit of issue is EA, with one unit per package, and the items must be delivered to the DLA Distribution Center at New Cumberland, Pennsylvania. The original required delivery date is February 9, 2027, and transportation logistics are governed by DLAD Proc Note C19 and C20. The solicitation number is SPE4A6-26-T-02UP, issued by the ASC Commodities Division under the Department of Defense, with a response deadline of July 16, 2026, and contact information provided for Antonia Willcox.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEARThe contract specifies the procurement of 23 shear bolts, part number NAS6305U44H, identified by NSN 5306-01-554-1609, under solicitation SPE4A6-26-T-05QD. The item is designated as a critical application item and must comply with stringent technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines, and all items must be physically identified per RQ017. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans, requiring zero non-conformances unless otherwise stated, with verification levels based on critical, major, or minor attributes. The item must be inspected and accepted at origin, with no quantity variance allowed, and delivered FOB origin by January 12, 2026, to meet the original delivery requirement of May 18, 2026. The contractor is subject to CMMC Level 2 self-assessment, requires configuration change management approval for any deviations, and must submit documentation for source approval as outlined in RC001 and RQ002. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with shipping governed by DLAD Proc Notes C19 and C20.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCEThis contract pertains to the procurement of close tolerance screws identified by NSN 5305-01-064-4692 and part number C7985-3-3, with a total quantity of 3,354 units. The item is classified as a commercial item and must comply with stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other standards unless otherwise specified. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated; critical attributes are subject to the most rigorous verification levels. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization conforming to DLA’s RP001 standards, and all marking and labeling must include proper government identification where applicable. The screws are designated as a critical application item, and documentation for source approval is required due to proprietary or insufficient data for competitive procurement. Delivery is FOB origin with no variance allowed in quantity, inspection and acceptance occur at destination, and full compliance with DLA packaging and shipping directives including DLAD Proc Note C19 and C20 is mandatory. The required delivery date is January 13, 2027, with a 183-day lead time from contract award. The contracting office is the ASC Commodities Division under the Department of Defense, and all communications and submissions must reference the solicitation number SPE4A6-26-T-02TQ.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
WASHER, KEYThe contract is for the procurement of a key washer with NSN 5310-01-141-7200, identified as a critical application item, sourced exclusively from HOWMET GLOBAL FASTENING SYSTEMS INC. under part number CA21062-10R. Technical data is not publicly available for competitive procurement due to proprietary or insufficient information, and compliance with DLA’s Master List of Technical and Quality Requirements is mandatory. The item must adhere to strict configuration control, packaging standards per MIL-STD-2073-1E and DLA packaging requirements, and marking specifications in accordance with MIL-STD-129. Zero defect sampling is required per MIL-STD-1916 or ASQ H1331, with all attributes subject to strict verification levels unless otherwise defined. The item is designated for delivery FOB origin within 20 days, with no variance allowed in quantity, and must be shipped to the U.S. military facility in Mumbai, India, via the designated freight forwarder. All documentation must reflect government-specific identification codes and tracking details, and the supplier must remove any government markings from non-accepted supplies. The contract was issued under solicitation SPE4A6-26-T-03CB with a response deadline in July 2026 and is classified for government use only, with compliance requirements extending to test equipment, engineering change proposals, and deviation requests governed by DoD standards.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details