Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SCREW, MACHINE

Active
SPE4A6-26-T-07QDFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 89 hatchets of a machine screw specified by NSN 5305-00-707-3633 and part number MS24694S88, manufactured to meet NASM24694 Revision 3 standards. The item is designated as a critical application requiring Critical Item Source Inspection and must comply with stringent technical and quality requirements including CMMC Level 2 Self-Assessment, MIL-STD-130N identification marking, and inspection protocols per MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required in sampling unless otherwise specified. All threads classified as 3A and 3B must be inspected for dimensional conformance per FED-STD-H28/20 System 22, excluding small internal and external threads below specified diameters. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements, and all markings and labeling must reflect government standards. Delivery is FOB origin with a 349-day lead time, required for shipment by April 5, 2026, to the DLA Distribution facility in New Cumberland, Pennsylvania. The unit of issue is HD, with no variance allowed in quantity, and inspection and acceptance occur at origin. The contract incorporates all applicable DLA Master List of Technical and Quality Requirements which supersede all other standards, and compliance with federal procurement regulations including the use of authorized units of issue as defined by DoD guidelines.

General Info

89 hatchets, NSN 5305-00-707-3633, critical item, CMMC Level 2, FOB origin, deliver by April 5, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332112 - Nonferrous ForgingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-07QD Request for Quotations DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
LISA HARVIE
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SCREW,MACHINE
SCREW, MACHINE
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT DLA DURING "OPEN SOLICITATION ONLY". TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)> FOR EBS SOLICITATIONS USE URL HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
CRITICAL ITEM SOURCE INSPECTION REQUIRED.
GAUGING REQUIREMENTS AS FOLLOWS
ALL CLASS 3A AND 3B THREADS WILL BE INSPECTED
SPE4A6-26-T-07QD
SECTION B
FOR DIMENSIONAL CONFORMANCE IN ACCORDANCE WITH
SYSTEM 22 OF FED-STD-H28/20. THIS EXCLUDES
SELF-LOCKING NUTS, INTERNAL THREADS SMALLER
THAN .190 INCH DIA AND EXTERNAL THREADS SMALLER
THAN .138 INCH DIA.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC NON GOVT STD NASM24694 REVISION NR 3 DTD 03/29/2019 PART PIECE NUMBER: MS24694S88
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7014105690 0001 HD 89.000
NSN/MATERIAL:5305007073633
DELIVERY (IN DAYS):0349
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
SPE4A6-26-T-07QD
SECTION B
PR: 7014105690 PRLI: 0001 CONT’D
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:04/05/2026 Original Required Delivery Date:06/28/2026
SPE4A6-26-T-07QD NSN/Part Number: 5305-00-707-3633 Quantity: 89 HD Purchase Request: 7014105690QTY: 89 Delivery: 349 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332112
New
DIBBS
BOLT, MACHINEThe contract is for the procurement of 112 machine bolts identified by NSN 5306-01-492-6795 under solicitation SPE4A6-26-T-07XC, issued by the Department of Defense’s ASC Commodities Division. The requirement is a total small business set-aside under NAICS code 332112, with responses due by July 28, 2026, and delivery expected within 258 days after order placement. The item is subject to multiple technical and quality specifications referenced from the DLA Master List of Technical and Quality Requirements, with compliance governed by the version in effect at the solicitation issue date. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. The technical data associated with this item is controlled under ITAR or EAR, restricting its export or disclosure to foreign persons unless authorized by the Department of State or Commerce, and only contractors with approved JCP certification, completed export control training, and DLA authorization may access such data. The place of performance is Tracy, California, with Tyler Greene as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332112
New
DIBBS
CONNECTOR, RECEPTACLE, EThis contract involves the procurement of a precision electrical connector, receptacle type, identified by NSN 5935014604596 and part number D38999/24WJ20SB, governed by MIL-DTL-38999N Revision N dated September 14, 2023, and TDP Rev A Gen 1. The item is classified as a qualified product under the Qualified Products List for Federal Stock Class 5935, meaning only manufacturers pre-qualified per procurement note H01 are eligible. Manufacturing traceability is mandatory, with materials produced by Amphenol, Matrix, or Pyle National between July 2006 and June 2016 explicitly prohibited regardless of condition, and traceability documentation may be requested before or after award. The use of any Class I ozone-depleting substances in design, manufacturing, testing, or cleaning is strictly prohibited unless prior written approval from the contracting officer is obtained, and this prohibition overrides all other specification requirements while maintaining performance standards. The item is designated as critical application and must be delivered FOB origin with no variance allowed in quantity—exactly ten units at a unit price not specified, delivered in 81 days. Packaging and labeling must strictly adhere to MIL-STD-129, with hazardous materials packaged per IP025 and non-hazardous materials per ASTM D3951, though all DLA Master List requirements supersede ASTM standards. Palletization must comply with RP001, and bare items must be permanently marked with CAGE code and lot/date codes as required by RQ017. The contract type is an indefinite-delivery vehicle under the Department of Defense’s Maritime Supply Chain with a ceiling value of $350,000 and a guaranteed minimum of one unit. Inspections and acceptances occur at destination, and all deliveries must be invoiced through WAWF. Compliance with federal cybersecurity standards, including NIST SP 800-171 and FAR 52.204-7012, is required alongside flow-down obligations to subcontractors, including hazardous material reporting and U.S.-flag vessel use for international shipments, which demands advanced waiver requests if applicable. Contractors must affirm their size status, UEI, and CAGE code, and represent compliance with anti-trafficking, employment eligibility, sustainable product, and whistleblower rights provisions. No attachments are formally
MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332112
New
Federal
53--BOLT,MACHINEThe U.S. Department of Defense, through the Defense Logistics Agency Aviation, is soliciting quotes for 112 machine bolts with NSN 5306014926795 under a total small business set-aside, targeting businesses certified by the Small Business Administration. The solicitation, numbered SPE4A626T07XC, was posted on July 20, 2026, with responses due by July 28, 2026, and requires all submissions to be made electronically through the SAM.gov portal; no hard copies are available. The delivery destination is DLA Dist San Joaquin, with a required delivery timeline of 258 days after contract award. The NAICS code 332112 classifies this procurement within the forging and stamping industry, and all responsible small business sources are encouraged to participate. Technical specifications, including digitized drawings and military standards, can be accessed electronically via the provided links. Primary communication for questions must be directed to the buyer’s email listed in the solicitation, accessible through the SAM.gov workspace or the DIBBS portal. The contracting office is located in Richmond, Virginia.
DLA Aviation

POSTED

about 11 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332112
New
Federal
59--CONNECTOR,RECEPTACLE,EThe solicitation seeks a single connector, receptacle, with NSN 5935014604596, in a quantity of ten units, under a potential Automated Indefinite Delivery Contract that will remain active for one year or until aggregate orders reach $350,000, whichever comes first. The guaranteed minimum order is one unit, with an estimated one order per year, and deliveries will be distributed to multiple DLA depots across CONUS and OCONUS via consolidated and containerized shipping points. This item is on a Qualified Products List, and only suppliers meeting the required specifications may respond. The solicitation is an electronic RFQ with no hard copies available, and all quotes must be submitted electronically by the deadline of August 4, 2026. Military standards and specifications can be accessed electronically. Only responsible sources are eligible to submit, and all timely responses will be considered. The procurement is managed by the DLA Land and Maritime office in Columbus, Ohio, and inquiries should be directed via email to the point of contact listed in the official solicitation document accessible through the provided SAM.gov link.
DLA Land And Maritime

POSTED

about 11 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332112
New
DIBBS
Indicator Light Assembly ManufacturingThe contract calls for the manufacture and assembly of 26 military indicator units identified by NSN 6210-00-336-5873, all in strict compliance with established military specifications. This includes full responsibility for quality control, performance testing, and preparation for shipment, ensuring that each unit meets the required technical and operational standards. The work must be completed and delivered in accordance with government protocols, with all documentation and certifications properly maintained to verify conformance. The solicitation is issued as a subcontract under the NAICS code 332112, associated with the ASC COMMODITIES DIVISION of the Department of Defense. The place of performance is designated as Tracy, California, with a zip code of 95304-5000. Responses are due by July 27, 2026, with the request posted on July 19, 2026. The procurement is managed through the DIBBS system, and contractors are expected to adhere to all terms and conditions outlined in the solicitation on the provided DIBBS link.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
Power Unit Envelope ManufacturingThe contract calls for the manufacture of 894 base units of the ENVELOPE, POWER UNIT (NSN 6115-01-566-9209), with an option to increase production up to a total of 1,300 units. Production must utilize casting or forging processes, and the successful contractor is required to provide comprehensive tooling documentation or submit a formal request for tooling as part of the deliverables. The work is classified as a subcontract under NAICS code 332112, reflecting precision forging and stamping operations, and is managed by the Department of Defense through the Maritime Supply Chain office. Performance is specified to occur in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 19, 2026, and responses are due by August 20, 2026, with all submissions required through the DIBBS platform using the reference number SPE7M126Q1262.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 332112
New
DIBBS
Carbon Steel Clutch Disk ManufacturingThe contract is for the manufacture of vehicular clutch disks using carbon steel, encompassing all phases from production to final delivery, with strict adherence to DLA technical specifications, MIL-STD-129 labeling standards, and full traceability requirements to ensure compliance and quality. Each unit must meet rigorous operational and material standards, and the entire manufacturing process must be documented to support accountability and inspection by government representatives. The work is to be performed at a designated location in Anniston, Alabama, with all products subject to verification through verified quality control protocols and documented records. This is a total small business set-aside subcontract under the SBA program, meaning only small businesses that meet SBA size standards are eligible to bid. The North American Industry Classification System code 332112 classifies the work under forging and stamping operations, aligning with precision metal component manufacturing. Responses are due by July 30, 2026, with the solicitation posted on July 19, 2026, through the DLA’s DIBBS platform. The contracting activity falls under the Department of Defense’s Land Supplier Operations for Wheeled Vehicles, emphasizing the critical role these components play in military vehicle systems. Participation requires familiarity with DoD procurement protocols and the ability to fully comply with federal defense manufacturing and labeling mandates.
LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332112
New
DIBBS
Precision Fastener ManufacturingThe contract awards the manufacturing of 89 hundred machine screws that must fully comply with NASM24694 Revision 3 specifications, including precise dimensional tolerances and thread integrity verified per FED-STD-H28/20 inspection standards. All production must adhere to strict quality control measures to ensure dimensional accuracy and functional reliability throughout the batch. The work is to be performed at a designated location in New Cumberland with a ZIP code of 17070-5002, consistent with the Department of Defense’s procurement requirements under the North American Industry Classification System code 332112. This is a subcontract solicitation issued by the ASC Commodities Division under the Department of Defense, with responses due by July 27, 2026. The solicitation was posted on July 19, 2026, and all bidders are expected to meet the technical and compliance criteria outlined in the referenced standards. No specific set-aside classification is identified, and the procurement remains open to qualified subcontractors capable of delivering certified hardware that meets military-grade fastener requirements. Further details and submission guidelines are available via the provided DIBBS link.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINEThe contract solicitation SPE4A0-26-T-3942 seeks the procurement of two machine bolts, NSN 5306-01-398-2624, with a delivery requirement of five days after delivery order issuance to a FPO address with ZIP code 96349. The item is sourced exclusively from Buffalo Pumps Inc, identified by CAGE code 83130 and part number 399-05-1009, and must comply with quality assurance provision EQ003. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures mandating adherence to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan; acceptance requires zero non-conformances in the sample lot unless otherwise specified, and unspecified attributes are treated as major. Item Unique Identification is not required per service customer request, and DFARS 252.211-7003(c)(1)(i) applies. The bolts are subject to strict prohibitions on intentional use of mercury or mercury-containing compounds, with exceptions limited to batteries, fluorescent lights, required instruments, sensors, controls, weapon systems, and NAVSEA-specified chemical reagents; portable devices containing mercury must include a secondary containment and be shock-proof as per NAVSEA 5100-003D. Packaging and preservation must conform to MIL-STD-2073-1E using QUP:001 and PRES MTHD:10, with preservation material code 00 and no cushioning; labeling and marking adhere to MIL-STD-129 with 2D Data Matrix barcoding and no special marking code. Delivery is FOB destination with inspection and acceptance performed at the point of delivery by government personnel. Invoicing must be submitted electronically via WAWF, and payment processing follows DFARS 252.232-7003 and 252.232-7006. The contract incorporates numerous FAR and DFARS clauses including inspection of supplies, changes, default, cybersecurity safeguards, combating trafficking, employment eligibility verification, environmentally preferable products, hazardous material identification, and prohibited use of hexavalent chromium. The estimated contract value is $800 based on historical unit pricing of $200 per unit, with no current
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
LIGHT ASSEMBLY, INDIThe contract pertains to the procurement of 26 units of a LIGHT ASSEMBLY, INDICATOR with NSN/Part Number 6210-00-336-5873 under solicitation SPE4A6-26-T-07PN, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 81 days after order placement, with performance taking place in Tracy, California, 95304-5000. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes default to major. Zero non-conformances are required in sampled lots unless otherwise stated, and manufacturers may choose between attribute or variable inspection under MIL-STD-1916. Inspection and acceptance occur at the origin, and item unique identification is not required per the service customer's request. The contract includes strict export control provisions under ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons, whether inside or outside the U.S., including foreign nationals employed by U.S. firms or subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and access to controlled data is restricted to contractors with a valid US/Canada Joint Certification Program certification, completed DOD export training, and approval from the DLA controlling authority. Government identification must be removed from non-accepted supplies, and packaging must adhere to DLA standards. The solicitation was posted on July 19, 2026, with responses due by July 27, 2026, and point of contact is Emily Andersen of the Defense Logistics Agency, reachable via email and phone provided. The NAICS code 332112 identifies the industry category, and the contract type is a federal solicitation with no set-aside designation.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
Federal
METAL BARThis solicitation, issued by the Department of Defense through DLA Maritime - Puget Sound under number SPMYM226Q7595, seeks quotations for a METAL BAR item with a response deadline of July 24, 2026 at 6:00 PM Eastern Time. All submissions must be completed electronically through SAM.gov, and bidders are required to fully complete the solicitation packet including specific mandatory fields: Box 17A must be filled out, Box 28 read, and pages signed in boxes 30a, 30b, and 30c. Bidders must provide their CAGE code, quote FOB Destination Bremerton, WA, clearly annotate the lead time, and identify both the manufacturer name and the country of origin for the product. To be considered responsive, bids must be submitted via email or fax to jack.edwards@dla.mil with applicable boxes in clause 52.204-24 (2)(d)(1) and (2) checked. Contractors subject to NIST SP 800-171 compliance must submit a current assessment no more than three years old unless otherwise specified; however, items classified as Commercial Off The Shelf (COTS) are exempt, provided the contractor explicitly identifies them and provides supporting documentation during the bidding process. The point of contact for inquiries is Jack Edwards, reachable at 360-813-9577.
DLA Maritime - Puget Sound

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 332112
New
DIBBS
Manufacture of Helical Compression SpringsThe contract entails the precision manufacturing of 300 helical compression springs to meet exacting military specifications under NSN 5360006295627, covering all stages from material sourcing and machining to heat treatment and rigorous testing. Compliance with defense-grade packaging and marking standards is mandatory, ensuring the components are fully qualified for military use and logistical integration. The work is being performed as a subcontract under the broader oversight of the Defense Logistics Agency, part of the Department of Defense, with the NAICS code 332112 indicating classification within forging and stamping operations. The contract was posted on July 16, 2026, and is tracked under the DLA’s procurement system with the reference SPE7M426V4746, though no specific place of performance or point of contact is listed. The absence of a set-aside designation suggests the opportunity is open to any qualified bidder, and the emphasis remains on fidelity to technical requirements and defense logistics protocols. All deliverables must align with the stringent quality and documentation standards expected by the Department of Defense to ensure operational readiness and supply chain integrity.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CDI SafeguardingThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to safeguard covered defense information, ensuring compliance with federal cybersecurity standards for protected data handled by subcontractors. It mandates strict adherence to cyber incident reporting requirements as outlined in FAR 52.204-21, obligating immediate notification and coordination with government authorities in the event of a security breach or suspicious activity affecting CDI. The work is classified as a subcontract under the NAICS code 541512, indicating services in custom computer programming and related cybersecurity support, and is issued by the Department of Defense, specifically the ASC Commodities Division, with a response deadline of August 3, 2026. All performance must be carried out in alignment with the NIST framework to maintain the integrity, confidentiality, and availability of sensitive defense data throughout the contract lifecycle.
Computer Systems Design Services

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541618
New
DIBBS
Supply Chain Compliance and Reporting ServicesThe contract requires comprehensive monitoring and reporting of supply chain risks to ensure compliance with DFARS and Section 889 regulations, focusing on the identification and timely disclosure of non-compliant items within a 72-hour window. It includes the tracking of restricted foreign products and mandates the validation of all supplier UEI and CAGE codes to verify identity and eligibility, ensuring that only authorized entities are included in the supply chain. This active surveillance and reporting framework is designed to prevent the introduction of compromised or prohibited components into defense-related systems. The contract is classified as a subcontract under NAICS code 541618 and is issued by the ASC Commodities Division of the Department of Defense. Response submissions are due by August 3, 2026, with the solicitation posted in July 2026. Performance is expected to support DoD supply chain integrity without specified geographic limitations, and the work is conducted under strict regulatory oversight to enforce national security standards. The requirement reflects a priority on transparency, accountability, and real-time compliance across all tiers of supplier activity.
Other Management Consulting Services

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 488999
New
DIBBS
Defense-Compliant Packaging and Marking ServicesThe contract requires comprehensive packaging, labeling, and marking of defense items in strict accordance with MIL-STD-129 standards, ensuring all items are properly identified, tracked, and prepared for military logistics. This includes serialized marking for individual unit traceability, compliant handling of hazardous materials, and generation of shipping documentation fully compatible with the Wide Area WorkFlow system to support automated receipt and inventory management. All work must meet Defense Department specifications for durability, clarity, and regulatory adherence throughout the supply chain. The solicitation is classified as a subcontract under NAICS code 488999, issued by the ASC Commodities Division within the Department of Defense. Responses are due by August 3, 2026, with the contract posting dated July 20, 2026. The place of performance and exact location details are not specified, but the work is expected to support federal defense logistics infrastructure. Interested parties must submit proposals through the official DIBBS portal before the deadline to be considered for award.
All Other Support Activities for Transportation

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541380
New
DIBBS
Quality Inspection and Testing ServicesThe contract entails independent inspection, sampling, and test reporting services for collar assemblies, requiring adherence to MIL-STD-1916 and ASQ Z1.4 standards for quality control and statistical sampling procedures. It includes formal execution of Factory Acceptance Testing and Preliminary Live Testing, with comprehensive documentation of all test results and non-conformance events to ensure full compliance and traceability. All deliverables must be rigorously recorded and submitted in formal reporting formats to meet defense quality assurance requirements. The work is categorized under NAICS code 541380 and is issued as a subcontract by the ASC Commodities Division under the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by August 3, 2026, and performance is expected to support defense logistics and procurement efforts without specifying a particular location. Interested parties must respond through the DIBBS portal before the deadline to be considered for award.
Testing Laboratories and Services

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332999
New
DIBBS
Precision Manufacturing of Defense Collar AssemblyThe contract entails the precision manufacture, first article testing, and production lot testing of a defense-specific Collar Assembly identified by NSN 1615-01-622-6850, adhering strictly to military specifications. Full traceability throughout all manufacturing stages is required, along with comprehensive compliance documentation to ensure adherence to defense quality and safety standards. The work involves rigorous testing protocols to validate performance and reliability under operational conditions, with all outputs subject to verification and approval by the contracting authority. The project demands exacting control over materials, processes, and inspections to meet the stringent demands of military applications. This subcontract opportunity, issued by the ASC COMMODITIES DIVISION under the Department of Defense, is open for responses until August 3, 2026. The NAICS code 332999 indicates it falls under other fabricated metal product manufacturing, with performance expected to comply with all relevant defense logistics and procurement requirements. The solicitation is posted on the DIBBS platform, and all participants must be prepared to meet the high standards of accountability and documentation expected in defense supply chain operations. While no set-aside provisions are specified, bidders must demonstrate capability, capacity, and prior experience in producing critical military components with verified quality assurance systems.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336419
New
DIBBS
GYRO-OPTICS ASSEMBLThe contract pertains to the procurement of 16 units of a GYRO-OPTICS ASSEMBLY with NSN/part number 1420-01-686-9216 under solicitation SPE4A6-26-T-07VU, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 633 days of award, and the solicitation is a total small business set-aside under NAICS code 336419. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision tied to the solicitation issue or award date depending on acquisition size. The item falls under export control regulations—either ITAR or EAR—prohibiting any disclosure or transfer of associated technical data to foreign persons without prior authorization from the Department of State or Commerce, and only contractors with approved JCP certification, completed DLA training, and formal approval may access such data. Compliance with specific documentation, inspection, and configuration management protocols is mandatory, including adherence to MIL-STD-1916 or ASQ H1331 for sampling, zero-defect acceptance unless otherwise stated, and implementation of CMMC Level 2 certification for cybersecurity. All items must meet DLA packaging standards and physical marking requirements, and no government identification may be removed from non-accepted supplies. Configuration changes require formal engineering change proposals, and source approval documentation must be submitted per RC001. Inspection and acceptance may occur at the manufacturer’s location, and item unique identification is not required per the customer’s request, though DFARS 252.211-7003 remains applicable. The point of contact for inquiries is Jennifer Jacobs, and proposals must be submitted by the specified deadline, with performance taking place in New Cumberland, Pennsylvania.
Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, SPLITThe contract pertains to the procurement of four split washers with part number M800006SS and NSN 5310017274766, under solicitation SPE4A6-26-T-07WM, with a required delivery within ten days of award. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling and conform to DLA Packaging Requirements (RP001), with palletization also governed by those directives. All packaging must follow ASTM D3951 unless overridden by DLA requirements. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, with attributes classified per VII, IV, and II verification levels or corresponding AQLs of 0.1, 1.0, and 4.0. Unit of issue is each (EA), with no quantity variance permitted. Delivery is FOB origin, with inspection and acceptance occurring at the destination. Item Unique Identification is not required per service customer request. The shipment must be sent via the fastest traceable means excluding parcel post to the specified delivery point in Lexington, KY, with the same address used for marking. The contract specifies no shelf life and applies Covered Defense Information provisions. The delivery deadline is June 18, 2026, with a solicitation response deadline of July 28, 2026, and contracting oversight is managed by the ASC Commodities Division under the Department of Defense.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPECThis contract specifies the procurement of a special-purpose electrical cable assembly with part number 5995-15-179-3265, manufactured by NORTHROP GRUMMAN ITALIA S.P.A, under solicitation SPE4A6-26-R-0258. A total of 43 units are required at a firm fixed price with no variance allowed in quantity, and delivery is mandated within 318 days after the award date. The item is classified as a critical application item and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, including specific methods for preservation, wrapping, and containerization, with marking in accordance with MIL-STD-129 and no special marking codes applied. Palletization follows DLA guidelines and transportation logistics are governed by DLAD procedural notes. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required in sampling unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0. The contract incorporates cybersecurity compliance under CMMC Level 2 self-assessment, and Covered Defense Information requirements apply. Inspection and acceptance occur at the destination, with FOB origin terms. Item Unique Identification is waived per customer request, and DFARS 252.211-7003(c)(1)(i) governs the exemption. The unit of issue is each, and suppliers must reference the official DoD unit of issue conversion table. All documentation and compliance obligations are tied to revisions in effect at the solicitation or award date, and the supplier must ensure removal of government identification from non-accepted supplies and apply physical identification to bare items as required.
Current-Carrying Wiring Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 30 days
View Details
NAICS: 334514
New
DIBBS
INDICATOR, SIGHT, LIQUIDThe contract pertains to the procurement of two units of an Indicator, Sight, Liquid, identified by NSN 6680013388470 and part number 08S01507-0002, furnished by Fairbanks Morse, LLC. All items must adhere strictly to MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with special marking code 05 indicating the item is a delicate instrument. Packaging and preservation must comply with DLA-specific requirements, including a prohibition on mercury or mercury compounds in any preservation, packaging, or marking materials, except for approved functional uses such as in batteries, instruments, or sensors as specified by NAVSEA. Portable devices containing mercury must include shock protection and a secondary containment boundary. The contract enforces zero-defect sampling under MIL-STD-1916 or equivalent zero-based plans, with unspecified attributes treated as major and acceptance criteria requiring no non-conformances in the sample lot unless otherwise stated. Unit of issue is each, with a firm quantity of two, no variance permitted, and delivery is FOB origin. Items must reach the destination at DLA Distribution, New Cumberland, Pennsylvania, within 158 days of contract award, with a required ship date of January 3, 2027. The material is non-hazardous, exempt from SDS requirements, and not subject to Unique Item Identification under DFARS 252.211-7003. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revision control aligned to the solicitation issue date. All transportation and shipping logistics must follow DLAD Proc Note C19 and C20.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333912
New
DIBBS
DISCONNECT ASSEMBLYThe contract pertains to the procurement of a disconnect assembly for a compressor, identified by part number 2210191-1 and NSN 4310013195804, with a quantity of two units. Delivery is required within 672 days from the contract award, with shipment originating FOB origin and final inspection and acceptance occurring at the destination facility in Cherry Point, North Carolina. The product must comply with all technical and quality requirements specified in the DLA Master List of Technical and Quality Requirements, referenced by R-numbers such as RA001, RQ001, RQ002, and RQ017, which govern configuration management, quality assurance, and bare item marking. Although item unique identification is not mandated, all packaging and labeling must adhere strictly to MIL-STD-129 and ASTM D3951, with palletization following DLA packaging protocols. Sampling and inspection must follow MIL-STD-1916 or an approved zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. Any non-conformance requires zero tolerance unless otherwise contracted. The supplier must submit documentation for source approval, manage configuration changes through formal engineering change proposals, and ensure all government identification is removed from non-accepted items per RQ011. The contract specifies a unit price of $0.00 per unit, indicating the value is included under a larger contract structure. The required delivery date is May 31, 2028, with no variance allowed in quantity. All transportation and shipping directives are governed by DLAD procedural notes C19 and C20, and the point of contact for inquiries is Keshia Mosley.
Air and Gas Compressor Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCEThe item specified is a screw with close tolerance requirements, identified by NSN 5305-01-047-8822, with a quantity of 50 units required under purchase request 7017548847. Delivery is expected within five days of award. This procurement is governed by strict export control regulations, as the technical data associated with the screw is subject to either the International Traffic in Arms Regulations or the Export Administration Regulations. Any disclosure of this technical data to foreign persons, regardless of location, constitutes an export and requires prior authorization from the U.S. Department of State or Department of Commerce. Access to this data is restricted to contractors who hold an approved U.S./Canada Joint Certification Program certification, have completed mandatory training on handling Department of Defense export-controlled technical data, and have been formally approved by the Defense Logistics Agency. DFARS 252.225-7048 applies to all handling and dissemination of this information. The solicitation number is SPE4A6-26-T-07WL, posted on July 20, 2026, with responses due by July 28, 2026. The contracting activity is under the ASC Commodities Division of the Department of Defense, and the point of contact is Charece Smith, reachable at the provided phone and email.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADEDThe contract specifies the procurement of 89 straight-headed pins identified by NSN 5315-01-605-7397 under solicitation SPE4A6-26-T-07VH, with a total value based on a unit price for each item and a required delivery within 165 days from the award date. The items must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, including packaging standards per MIL-STD-129 and ASTM D3951, though DLA requirements take precedence. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise defined, and attributes are assigned verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively. The product must conform to NASM20392 Rev 01 and NASM5673 Rev 1, with bare item marking and identification per RQ017, and government identification removed from non-accepted items under RQ011. Inspection and acceptance occur at origin, with no variance allowed in quantity. Packaging must adhere to RP001 DLA packaging standards and be palletized accordingly, shipped FOB origin to the delivery address in New Cumberland, Pennsylvania. The contract is a Total Small Business Set-Aside under NAICS code 332618, with a response deadline in July 2026 and delivery required no later than March 7, 2027.
Other Fabricated Wire Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details