SCREW, SHOULDER

The contract specifies the procurement of a shoulder screw identified by part number NAS1297-06H4 and NSN 5305-01-541-6213, manufactured to Revision 07 of the NAS1297 standard dated 02/28/2026. It is classified as a commercial item and a critical application component, subject to stringent quality and identification requirements. All hardware must conform to the current revision of the governing standard, and previously accepted older revisions are not permitted for items produced after the solicitation date. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise stated, with attributes assigned verification levels or AQLs per their criticality. Identification marking must comply with MIL-STD-130N paragraph 4.1.b(2), in addition to required manufacturer logos and material markings, and physical marking must adhere to RQ017 guidelines for bare item identification. The item must be packaged in accordance with ASTM D3951, with all packaging and labeling following MIL-STD-129, and palletization must meet DLA’s RP001 packaging requirements, which override ASTM standards when conflicts arise. The unit of issue is each (EA), with a contracted quantity of 38 units at $38.00 per unit, for a total price of $1,444. Delivery is required within 72 days of award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, specifically the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA. The required delivery date is November 29, 2026, with a need ship date of July 20, 2026. All technical and quality requirements referenced via R-numbers are governed by the DLA Master List of Technical and Quality Requirements, and transportation instructions follow DLAD Proc Note C19 for shipping and C20 for first destination. The solicitation number is SPE4A6-26-T-40C4, with response deadline May 8, 2026, and primary point of contact is Hannah Shimer at DLA.