Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SCREW, TAPPING

Active
SPE4A6-26-T-05LMFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a single tapping screw with NSN 5305012433751 and part number 86642312, quantity one unit, under solicitation SPE4A6-26-T-05LM. Delivery is required within ten days FOB origin to Fort McCoy, Wisconsin, with inspection and acceptance occurring at the destination. The item must be packaged in compliance with ASTM D3951, while all DLA Master List of Technical and Quality Requirements take precedence, and packaging must be marked and labeled per MIL-STD-129. Palletization must adhere to DLA Packaging Requirements, and the unit of issue is one each. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in sample lots unless otherwise stated. The supplier must use traceable shipping methods and avoid parcel post, with shipment identified by RDD E and project code 9GQ TP 2. The purchase request number is 7017403634, and the original required delivery date is July 6, 2026. All technical and quality provisions referenced by R or I numbers are governed by the DLA Master List as of the solicitation issue date.

General Info

One tapping screw, NSN 5305012433751, delivered FOB origin to Fort McCoy by July 6, 2026, per DLA and MIL-STD requirements.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

BLDG 495 EAST K STREET, FORT MCCOY, WI, 54656-5131, US

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE4A6-26-T-05LM

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
ANGELA CARABALLO
contact@example.gov

Full Description

Show more
SCREW,TAPPING
SCREW,TAPPING,THREAD
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CNH INDUSTRIAL AMERICA LLC 10988 P/N 86642312
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017403634 0001 EA 1.000
NSN/MATERIAL:5305012433751
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
SPE4A6-26-T-05LM
SECTION B
PR: 7017403634 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:025
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W5CD3D
W6X9 USALRCTR FT MCCOY
AWCF SSF DOL SARSS1
BLDG 495 EAST K STREET
FORT MCCOY WI 54656-5131
US
RDD(3-POS RDD)/ANMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W5CD3D
W6X9 USALRCTR FT MCCOY
AWCF SSF DOL SARSS1
BLDG 495 EAST K STREET
FORT MCCOY WI 54656-5131
US
MARKFOR
W5CD3D
W6X9 USALRCTR FT MCCOY
AWCF SSF DOL SARSS1
BLDG 495 EAST K STREET
FORT MCCOY WI 54656-5131
US
M/F: (TCN) W5CD3D61740130
RDD: E
PROJ: 9GQ TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/06/2026
SPE4A6-26-T-05LM NSN/Part Number: 5305-01-243-3751 Quantity: 1 EA Purchase Request: 7017403634QTY: 1 Delivery: 10 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEThe contract specifies the procurement of a self-locking nut with the NSN 5310-01-717-8608, quantity of one unit, under solicitation SPE4A6-26-T-05LQ, with a delivery requirement of 20 days after delivery order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with revision control based on solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Bare items must be physically marked according to specified guidelines. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 unless otherwise directed, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated. The item contains technical data subject to ITAR or EAR export controls, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and applies DFARS 252.225-7048. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and been formally approved. The solicitation was posted on July 12, 2026, with a response deadline of July 20, 2026, under NAICS code 332722, and is managed by the Department of Defense’s ASC Commodities Division with performance in Mechanicsburg, Pennsylvania. Primary point of contact is Charece Smith.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGONThe contract specifies the procurement of 100 plain hexagonal nuts with NSN 5310-01-436-7220 under solicitation SPE4A6-26-T-05LW, with a required delivery within five days of award and delivery terms FOB destination. All supplies must comply with DLA packaging standards MIL-STD-2073-1E and marking requirements MIL-STD-129, including preservation method code 10 per ASTM D3951, and are subject to zero tolerance for non-conformances under sampling rules aligned with MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. Mercury and mercury-containing compounds are strictly prohibited in all aspects including preservation, packaging, and marking except for specific functional applications approved by NAVSEA, and portable devices containing mercury must include secondary containment. The nuts must be delivered to the designated government address at FPO AP 96349, with detailed transportation instructions governed by DLAD Proc Notes C19 and C20. The contract enforces strict source approval documentation, physical item marking, and adherence to the DLA Master List of Technical and Quality Requirements, with compliance controlled by the revision in effect on the solicitation issue date. The purchase request is identified as 7017185255, with a required delivery date of June 17, 2026, and the point of contact for inquiries is Ashley Jones-Turner, responsible for oversight by the ASC Commodities Division under the Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, BAThe solicitation SPE4A6-26-T-05LN seeks a self-locking nut, NSN 5310-00-880-5844, with a total quantity of 681 units to be delivered within 450 days after order placement. The contract requires the submission of one unit of this item within 90 calendar days for First Article Testing at Hill Air Force Base, with the Government having 150 days from receipt to issue written approval, conditional approval, or disapproval. Disposition of the test unit must follow FAR provisions, and Fast Pay is not applicable. Offerors must comply with domestic sourcing restrictions including the Berry Amendment and Buy American Act, with thresholds lowered to $150,000, requiring full disclosure of any non-domestic materials used. Small business joint ventures must provide specific representations to qualify under applicable set-asides. All quotes must avoid the use of additive manufacturing unless formally approved in advance, and offers containing AM-produced items will be deemed non-responsive. Additionally, bidders must confirm they will not provide covered telecommunications equipment or services under FAR 52.204-24 or DFARS 252.204-7016. Vendors must register via DLA’s new AMPS system within two months to access the Vendor Shipment Module and maintain shipping capability, and those using VSM WebServices must update their internal schema to avoid loss of access. Quoters are strongly encouraged to provide quantity ranges to accommodate fluctuating demands without administrative burden, except for Auto IDC. Offers are expected to include current dealer or distributor certification details, and those unable to quote by the closing date must submit a “No Bid” via DIBBS with an anticipated quote date or reason. Non-compliance with any of these requirements will render an offer ineligible for award.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEARThe contract solicits 480 shear bolts identified by NSN 5306-01-170-5556 under solicitation number SPE4A6-26-T-05LS, with a required delivery timeline of 166 days after award. The item is procured as fully competitive in accordance with military or federal specifications, and the contract incorporates stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. Quality assurance provisions include tailored higher-level requirements for both manufacturers and non-manufacturers, mandatory quality conformance inspections, and inspection and acceptance at the point of origin. The item is designated as critical, requiring physical identification and bare item marking per RQ017, and government identification must be removed from non-accepted supplies per RQ011. Packaging must comply with DLA standards, and covered defense information may apply. The solicitation was posted on July 12, 2026, with responses due by July 20, 2026, and performance is to be delivered to New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Debra Fowler of the ASC Commodities Division, Department of Defense, under NAICS code 332722.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThe contract is for the procurement of 28 machine screws identified by NSN 5305-01-718-7662, issued under solicitation SPE4A6-26-T-05KX by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 104 days of award, with a response deadline of July 20, 2026, and the solicitation was posted on July 12, 2026. The item falls under NAICS code 332722 and is intended for performance at New Cumberland, Pennsylvania, with Stephanie Sandridge listed as the primary point of contact. The contract incorporates multiple technical and quality requirements from the DLA Master List, including packaging standards, removal of government identification from non-accepted supplies, physical marking of bare items, and strict export control protocols governed by ITAR or EAR regulations. Technical data associated with this item is classified as export-controlled, restricting access exclusively to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export control training, and formal authorization from DLA. All handling, disclosure, or transmission of technical data to foreign persons, including foreign nationals within the United States or foreign subsidiaries, must comply with DFARS 252.225-7048. Additionally, the contractor must be CMMC Level 2 certified as a Third-Party Assessment Organization to meet cybersecurity requirements for handling controlled technical information.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details