Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SEAL

Active
SPE7L3-26-T-173QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation issued by the Department of Defense Land Supplier Operations Vehicle Support is for the procurement of 163 nonmetallic angle seals under part number 5330-01-133-8102. The contract requires delivery within 133 days after receipt of order and is subject to full and open competition. Performance will take place at Robins Air Force Base. The agreement incorporates strict technical and quality requirements as defined in the DLA Master List, including specific packaging standards and higher level quality requirements for manufacturers. Notably, the contract is subject to rigorous export controls under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed training to handle technical data. All supplies must be cleared of government identification if not accepted.

General Info

DoD procurement of 163 nonmetallic angle seals for delivery to Robins Air Force Base.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

(1)

SPE7L3-26-T-173Q.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUSA
Contacts
Susan Diamond
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SEAL
SEAL, NONMETALLIC ANGLE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
FULL AND OPEN COMPETITION APPLY
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5330-01-133-8102 Quantity: 163 EA Purchase Request: 7017439187QTY: 163 Delivery: 133 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-958G
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of one gasket under national stock number 5330-01-682-9597. The contract requires delivery within 20 days after the order is placed. The procurement is subject to specific technical and quality requirements, including DLA packaging standards and the identification marking of U.S. military property per MIL-STD-130N. Strict material constraints are in place, explicitly prohibiting the use of asbestos and the intentional addition of mercury or mercury-containing compounds, with limited exceptions for specific functional components. To prevent deterioration from ultraviolet rays, the item must be sealed in a medium duty, waterproof, greaseproof, and opaque bag according to MIL-DTL-117 specifications. These requirements apply to all delivery methods, including direct vendor delivery and foreign military sales.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE4A7-26-T-645W
This contract is for the procurement of 381 O-rings, identified as a critical application commercial item with NSN 5331-01-533-0989 and Hamilton Sundstrand part number 818548-223. The delivery is required within 120 days, with a need ship date of September 5, 2025, and an original required delivery date of August 21, 2026. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution Warner Robins in Georgia. The items must adhere to strict quality and packaging standards to prevent deterioration from ultraviolet rays, requiring sealing in medium duty, waterproof, greaseproof, and opaque bags per MIL-DTL-117. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan. The contract incorporates various DLA technical and quality requirements, including specific guidelines for packaging, marking per MIL-STD-129, and configuration change management.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339991
New
DIBBS
PACKING MATERIAL
Solicitation # SPE7M4-26-T-333K
This solicitation, issued by the Department of Defense Fluid Handling Division under number SPE7M4-26-T-333K, is for the procurement of 13 units of packing material identified by NSN 5330-01-011-5048. The contract requires delivery within 161 days after order and specifies that performance will take place in Tracy, California. The procurement is governed by DLA master technical and quality requirements, including specific standards for packaging, origin inspection, and identification marking of U.S. military property per MIL-STD-130N. The material is subject to strict environmental and safety constraints, explicitly prohibiting the use of asbestos and Class I ozone depleting chemicals. There is a general ban on the intentional addition of mercury or mercury-containing compounds, with limited exceptions for functional components like batteries or sensors as specified by NAVSEA. Additionally, the items have no shelf life requirement and must comply with covered defense information protocols.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7L1-26-T-958U
This contract is a solicitation for the procurement of plain seals, identified by NSN 5330017382460, for delivery to multiple naval vessels including the USS Mason, USS Truxtun, USS Bulkeley, USS McCampbell, USS Nitze, USS Preble, and USS William P Lawrence. The requirement consists of several line items, each for a quantity of one unit, with a delivery timeframe of 20 days after order. The contract is designated as a Total Small Business Set-Aside under NAICS code 339991. Strict technical and quality requirements are mandated, including the prohibition of Class I ozone-depleting chemicals and the intentional addition of mercury. Contractors must maintain supply chain traceability documentation and adhere to specific packaging standards, notably using medium-duty, waterproof, greaseproof, opaque bags to prevent deterioration from ultraviolet rays. Delivery is FOB Destination, with inspection and acceptance occurring at the destination.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-173K
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 93 gaskets under NSN 5330-01-047-0444. The items are classified as Commercial Off the Shelf products and are subject to full and open competition. Delivery is required within 63 days after order, with the place of performance located at Robins Air Force Base. The contract mandates strict adherence to DLA technical and quality requirements, specifically regarding packaging and the removal of government identification from non-accepted supplies. All supplied items must be entirely free of asbestos. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, with limited exceptions for specific functional components such as batteries or sensors as specified by NAVSEA.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SEAL
Solicitation # SPE7L3-26-T-173W
This solicitation issued by the Department of Defense Land Supplier Operations Vehicle Support is for the procurement of 63 units of a seal, identified by NSN 5330-01-262-1432. The contract is a total small business set-aside under NAICS code 339991, with a delivery requirement of 112 days after receipt of order. Performance is to take place at Tinker AFB. The contract contains strict export control requirements under ITAR and EAR regulations, meaning technical data cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Department of Commerce. Eligible contractors must possess an approved US/Canada Joint Certification Program certification and complete specific DLA training and questionnaires to access the controlled technical data.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-959D
This solicitation from the Department of Defense Land Supply Chain is for the procurement of seven O-rings under NSN/Part Number 5331-01-058-4018. The contract requires delivery within 20 days after receipt of order. All supplied items must be completely free of asbestos, and any alternative materials must be approved according to specific regulatory clauses. The contract mandates adherence to DLA packaging requirements and technical quality standards found in the DLA Master List. Quality assurance and sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with specific verification levels and AQLs assigned to critical, major, and minor attributes. The solicitation was posted on August 12, 2026, with a response deadline of August 24, 2026.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-959G
This contract is for the procurement of four gaskets, identified by NSN 5330-01-377-9842 and part number 40034626 from Engine Systems, Inc. The solicitation, numbered SPE7L1-26-T-959G, requires delivery to the USNS Bruce C Heezen (T AGS 64) within five days of order. The agreement specifies that the items must be delivered FOB Destination and prohibits the use of asbestos or the intentional addition of mercury, with limited exceptions for specific functional components. Strict packaging and marking standards are mandated, including compliance with MIL-STD-130N for identification and MIL-STD-129 for marking. Because the items are susceptible to ultraviolet ray deterioration, they must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. The contract also incorporates DLA master technical and quality requirements and specifies that shipments must be sent via the fastest traceable means rather than parcel post.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-174A
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 50 gaskets under National Stock Number 5330-01-674-5138. The contract requires delivery within 98 days after the order is placed. The procurement is governed by specific technical and quality requirements, including DLA packaging standards and the protection of covered defense information. Suppliers must ensure that all items are free of asbestos and do not contain Class I ozone depleting chemicals. Because the items are susceptible to ultraviolet ray deterioration, they must be packaged in medium duty, waterproof, greaseproof, opaque bags according to MIL-DTL-117 specifications. Any substitute chemicals or materials must be submitted for official approval.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L3-26-T-173U
This solicitation, identified as SPE7L3-26-T-173U, is for the procurement of seven preformed gaskets under NSN 5330-00-587-9955 for the Department of Defense. The contract requires delivery within 161 days after the order is placed. The items must be packaged and sealed in medium duty, waterproof, greaseproof, opaque bags according to MIL-DTL-117 standards to prevent deterioration from ultraviolet rays. The contractor must adhere to several strict quality and technical requirements, including the maintenance of supply chain traceability documentation and the removal of government identification from non-accepted supplies. There is a strict prohibition against the use of class I ozone depleting chemicals and the intentional addition of mercury or mercury containing compounds, with limited exceptions for specific functional components. Additionally, the contract is subject to covered defense information regulations and specific DLA packaging and source approval documentation requirements.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKET, SPIRAL WOUND
Solicitation # SPE7L1-26-T-958J
This contract is for the procurement of one spiral wound gasket, identified by NSN 5330-01-443-4465 and associated with Velan Valve Corp part numbers 8974-005-221 and 8973-002-340. The item is designated as a critical application item and requires critical item source inspection. Delivery is required within 20 days, with a required delivery date of August 10, 2026, shipping FOB Origin to the USS America LHA 6. The contract mandates strict adherence to DLA packaging, marking, and quality conformance requirements, including MIL-STD-129 and MIL-STD-2073-1E. Specific material restrictions are in place, prohibiting the intentional use of mercury or asbestos. Due to potential ultraviolet ray deterioration, the gasket must be sealed in a medium duty, waterproof, greaseproof, opaque bag per MIL-DTL-117. Quality sampling must follow MIL-STD-1916 or ASQ H1331, with zero non-conformance allowed for acceptance.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE4A7-26-T-645U
This contract is for the procurement of 595 O-rings, identified as National Stock Number 5331-01-533-0989 and Hamilton Sundstrand part number 818548-223. The items are classified as commercial critical application items. Delivery is required within 72 days, with a required delivery date of January 26, 2027, shipping FOB Origin to DLA Distribution Warner Robins. The contract mandates strict quality and packaging standards to prevent deterioration from ultraviolet rays, requiring the use of medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331. The agreement incorporates several DLA technical and quality requirements, including specific guidelines for source approval, packaging, and configuration change management.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

New
DIBBS
PARTS KIT, WINCH
Solicitation # SPE7L3-26-R-0003

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333613
New
DIBBS
CYLINDER ASSEMBLY, A
Solicitation # SPE7L3-26-T-173S
This contract is for the procurement of one linear actuating cylinder assembly, identified by NSN 3040012644741 and Parker Hannifin part number GG121286B0. The order is issued by the Department of Defense under solicitation SPE7L3-26-T-173S with a required delivery date of August 10, 2026, and a delivery window of 20 days. Shipping is designated as FOB Origin and is destined for the USS America LHA 6. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-129 and MIL-STD-2073-1E. There are explicit prohibitions against the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except where functionally required by specific systems. The item has no shelf life requirement and must be shipped via the fastest traceable means, avoiding parcel post.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336340
New
DIBBS
BRAKE SHOE SET
Solicitation # SPE7L3-26-T-173R
This contract is for the procurement of 50 brake shoe sets under solicitation SPE7L3-26-T-173R for the Department of Defense. The items are identified as commercial products with a required delivery date of August 14, 2026, and a delivery timeframe of five days after receipt of order. The contract is a total small business set-aside and specifies that the goods must be shipped FOB Origin to the Government of Israel Ministry of Defense. The procurement is subject to strict technical and quality requirements, including DLA packaging standards and source-controlled drawings. Suppliers must adhere to environmental restrictions, specifically prohibiting the intentional addition of mercury or the use of Class I ozone-depleting chemicals. Packaging and marking must comply with MIL-STD-129 and MIL-STD-2073-1E, with specific palletization requirements outlined in the DLA master list.
Motor Vehicle Brake System Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L3-26-T-173T
This contract is for the procurement of four helical compression springs, identified by NSN 5360-01-734-0164 and Eaton Aerospace part number 973415. The items are designated as critical application items and must be delivered to the USA Depot in Corpus Christi, Texas, within five days. The agreement specifies a zero percent quantity variance and requires inspection and acceptance at the destination. The supplier must adhere to several DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, and strict guidelines regarding the exclusion of mercury compounds. Documentation for source approval and the handling of covered defense information are also required. Shipping must be conducted via the fastest traceable means, excluding parcel post, to meet the required delivery date of July 7, 2026.
Spring Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE7L3-26-T-173Z
This contract, identified as SPE7L3-26-T-173Z, is a solicitation issued by the Department of Defense Land Supplier Operations Vehicle Support for the procurement of one hexagon cap screw. The item is identified by NSN 5305-01-652-5209 and Oshkosh Defense LLC part number 4116805001. The delivery requirement is set for five days after order, with shipping terms established as FOB Origin and inspection and acceptance occurring at the destination. The procurement is subject to several technical and quality requirements, including DLA packaging standards, the removal of government identification from non-accepted supplies, and compliance with Covered Defense Information regulations. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA requirement RP001. The final shipment is destined for the US Army APS AH5 Camp Darby in Pisa, Italy.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336992
New
DIBBS
ARMOR, TRANSPARENT, VEHI
Solicitation # SPE7L3-26-T-173J
This contract is for the procurement of 10 units of transparent vehicular armor, identified by NSN 2541-01-598-7906 and part number 10014224 from General Dynamics Land Systems. The item is designated as a restricted source item, requiring engineering source approval by the government design control activity. Delivery is required within 20 days, with the original required delivery date set for August 14, 2026. The terms specify FOB Origin for delivery, inspection, and acceptance, with a strict zero percent quantity variance. Compliance requirements include DLA packaging standards, MIL-STD-129 marking, and specific fragile handling instructions. The contractor must adhere to Covered Defense Information protocols and provide a Cybersecurity Maturity Model Certification Level 2 self-assessment. Logistics are managed via Compass Forwarding, with shipping destined for a facility in Stezyca, Poland. The solicitation is issued by the Department of Defense Land Supplier Operations Vehicle Support under solicitation number SPE7L3-26-T-173J.
Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
SPRING, CONSTANT FOR
Solicitation # SPE7L3-26-T-173N
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 191 constant force springs under NSN 5360-00-534-9617. The contract is designated as a Total Small Business Set-Aside under NAICS code 332613, with a delivery requirement of 104 days after the order is placed. Performance is centered in Greensboro, North Carolina. The agreement is subject to specific technical and quality requirements, including RA001, RP001 for packaging, and RQ011 regarding the removal of government identification from non-accepted supplies. Interested parties must respond by August 24, 2026, in accordance with the solicitation number SPE7L3-26-T-173N.
Spring Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336340
New
DIBBS
BRAKE SHOE
Solicitation # SPE7L3-26-T-173L
This contract is for the procurement of four brake shoe sets, identified by NSN 2530014874619 and part number 040-322-01 from Holden Industries, Inc. The order is managed under solicitation SPE7L3-26-T-173L for the Department of Defense Land Supplier Operations Vehicle Support. Delivery is required within 158 days, with a required delivery date of January 30, 2027, shipped FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements and technical quality standards, specifically prohibiting the use of Class I ozone-depleting chemicals. Packaging must comply with MIL-STD-129 and either TQ requirement IP025 for hazardous materials or ASTM D3951 for non-hazardous items. Inspection and acceptance will take place at the destination, with a zero percent quantity variance allowed.
Motor Vehicle Brake System Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details