This Solicitation opportunity from Department Of Defense was posted on May 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

SEAL, AILERON

Closed

SPE4A5-26-T-142DFederal

Submission Closed05/22/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413

New

DIBBS

RECEPTACLE, AIRCRAFTThe contract pertains to the procurement of five units of an aircraft receptacle, identified by the National Stock Number 1680-01-551-9007. The solicitation number for this requirement is SPE4A5-26-T-245G, issued by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on June 16, 2026, and the response deadline is set for June 24, 2026. This procurement is categorized as a federal solicitation, with no specified set-aside type or designated NAICS code, and no detailed location for performance has been provided. The contract request originates from a government agency aiming to acquire these components to support its operations, likely involving aircraft maintenance or assembly. Although there is no explicit contact information or office address listed, potential vendors can access further details and submit their responses via the official Defense Logistics Agency contracting web portal. This purchase request highlights a straightforward acquisition process focused on timely submission within the provided solicitation timeline.

Defense Logistics Agency

POSTED

DEADLINE

ROD ASSY, LOWER FWD,The contract pertains to the procurement of four units of the ROD ASSY, LOWER FWD, identified by the part number 5306-01-566-3405. It is a solicitation issued by the Defense Logistics Agency under the Department of Defense, with the solicitation number SPE4A5-26-T-246B. The solicitation was posted on June 16, 2026, and responses were due by June 24, 2026. This contract involves a federal organization and does not specify any set-aside type or small business designations. The place of performance and detailed office address information are not provided. The request is managed through an official government procurement portal, ensuring compliance with federal acquisition processes for military or defense-related components.

Defense Logistics Agency

POSTED

DEADLINE

CONNECTOR, AIRCRAFT,The contract pertains to the procurement of aircraft connectors, specifically Part Number 4920-01-588-5404, with an order quantity of five units. It is issued under solicitation number SPE4A5-26-T-243S by the Defense Logistics Agency, a component of the Department of Defense. The solicitation was made public on June 16, 2026, and responses are due by June 24, 2026. The contract is categorized as a federal solicitation, but no special set-aside or NAICS code information is provided. The contract's place of performance and office address details are not specified, and there is no listed point of contact. The purchase request number associated with this contract is 7017199542. The procurement aims to support federal defense operations with the necessary aircraft connectors, reflecting the agency’s ongoing efforts to maintain and equip military assets. Additional details and the solicitation can be accessed through the Defense Logistics Agency's online portal.

Defense Logistics Agency

POSTED

DEADLINE

REPAIR KIT, AIRCRAFTThe contract involves the procurement of three aircraft repair kits identified by the National Stock Number 4920-01-684-3304. It is issued as a solicitation under the number SPE4A5-26-T-245B by the Defense Logistics Agency, a branch of the Department of Defense. The solicitation was posted on June 16, 2026, with a response deadline set for June 24, 2026. This contract is a federal solicitation without any specified set-aside status or NAICS code, indicating it is open under general federal acquisition rules. Although specific details such as the office address and place of performance are not provided, the procurement clearly supports defense logistics requirements, emphasizing the importance of timely response and compliance with defense contracting procedures. The official solicitation details and response submission can be accessed through the Department of Defense's contracting portal.

Defense Logistics Agency

POSTED

DEADLINE

FAIRING, AIRCRAFTThis contract involves the procurement of 24 aircraft fairings, identified by the National Stock Number 1560-01-643-4675. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, is designated as SPE4A1-26-T-2333. It was posted on June 16, 2026, with a response deadline set for June 23, 2026. The contract is structured as a solicitation, inviting vendors to submit proposals for this specific quantity of aircraft fairings. The contract does not specify any set-aside type, indicating it may be open to all qualified suppliers without preference for small or disadvantaged businesses. While no detailed location information for the place of performance or office address is provided, the contracting agency operates within the federal government framework. Interested parties are directed to access the procurement details through the Defense Logistics Agency’s bidding system using the supplied solicitation number link.

Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

in 7 days

AI Contract Overview

This contract pertains to the procurement of 46 units of a specific seal for an aileron, identified by NSN 1560-00-416-5895 and Boeing part number 60-1469-8. It is issued by the Department of Defense under solicitation number SPE4A5-26-T-142D, with a required delivery date no later than April 2, 2028, and a maximum delivery lead time of 171 days from award. The purchase is managed through the Defense Logistics Agency (DLA), with final delivery designated to the DLA Distribution Depot at Tinker AFB, Oklahoma. The contract outlines stringent packaging and marking requirements adhering to DLA packaging standards, MIL-STD-129, and applicable military specifications, and includes provisions for handling hazardous materials as per FED-STD-313. Quality and compliance standards are enforced through incorporation of the DLA Master List of Technical and Quality Requirements, including provisions for sampling inspection per MIL-STD-1916 or ASQ standards, and cyber security measures consistent with CMMC Level 2 self-assessment protocols. The contract mandates certain identification and marking procedures while exempting the requirement for Item Unique Identification due to the service customer's request. Inspection and acceptance are to occur at the destination, and the contractor must meet tailored and higher-level quality requirements defined for both manufacturers and non-manufacturers. Overall, the contract governs delivery, packaging, quality assurance, and cybersecurity adherence for this critical aerospace component within the Department of Defense supply chain.

General Info

Procurement of 46 aileron seals, delivered by April 2028, with strict quality and packaging standards.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing View NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-142D.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 14

Solicitation

Response DeadlineMay 22

Deadline has passed

Submission Closed

05/22/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Office AddressUS

Contacts

Annette Pruett

contact@example.gov

+1 (555) 000-0000

Full Description

SEAL,AILERON
SEAL,AILERON
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
SPE4A5-26-T-142D
SECTION B
THE BOEING COMPANY 82918 P/N 60-1469-8
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016786671 0001 EA 46.000
NSN/MATERIAL:1560004165895
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
SPE4A5-26-T-142D
SECTION B
PR: 7016786671 PRLI: 0001 CONT’D
Need Ship Date:11/10/2026 Original Required Delivery Date:04/02/2028
SPE4A5-26-T-142D NSN/Part Number: 1560-00-416-5895 Quantity: 46 EA Purchase Request: 7016786671QTY: 46 Delivery: 171 days ADO