Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Seal, Air, Aircraft

Active

FD2030-25-01430Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of an aircraft air seal under solicitation number FD2030-25-01430, issued by the Department of Defense’s DLA Aviation office located at Tinker Air Force Base, Oklahoma. The anticipated contract value is below the simplified acquisition threshold, which exempts it from public synopsis requirements under FAR 5.202(a)(13). The solicitation will be accessible via the Government Point of Entry (GPE), allowing the public to electronically view and respond to the notice in a fully digital manner. This approach ensures transparency while streamlining the procurement process by leveraging electronic dissemination and submission methods. The point of contact for this action is James Headington, who can be reached at the provided email address for any inquiries. The solicitation was posted on July 9, 2025, and is currently in the presolicitation phase, with no specific NAICS code or set-aside designation indicated.

General Info

Procurement of aircraft air seal by DLA Aviation, below acquisition threshold, digital solicitation access.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

NAICS

339991 - Gasket, Packing, and Sealing Device Manufacturing

Place of Performance

OK, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhasePresolicitation

PostedJul 9

Presolicitation

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

Contacts1 person available

OfficeTINKER AFB, OK, 73145-3070, USA

Organization / AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

Office AddressTINKER AFB, OK, 73145-3070, USA

Contacts

James Headington

contact@example.gov

Full Description

Show more

The proposed contract action will not be synopsized IAW with FAR 5.202(a)(13) for the following reasons: (i) Is for an amount not expected to exceed the simplified acquisition threshold; (ii) The solicitation will be made through a means that provides access to the notice of proposed contract action through the GPE; and (iii) Public is able to respond to the solicitation electronically through the GPE and offerors are permitted to respond electronically. Ref: SPRTA1-25-Q-0416

Similar Contracts

Same NAICS industry code

PACKING ASSEMBLY

Solicitation # SPRPA127QXA27

Pa DLA Aviation At Philadelphia

POSTED

about 1 hour ago

DEADLINE

Asbestos-Free Cover Gasket FabricationThis subcontract involves the fabrication and supply of three non-asbestos cover gaskets for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Opns Vehicle SPT projects. The contractor is required to manufacture the gaskets according to part number 7000-0.5IN-TR-150 specifications and material standard MIL-P23199, Level B. To ensure compliance, the provider must utilize precision cutting equipment and provide official certification that the products are non-asbestos, along with the necessary Safety Data Sheets. The project is categorized under NAICS code 339991 and will be performed at Fort Bragg, North Carolina. Interested parties must adhere to the response deadline of November 9, 2026. This effort supports prime contractors in delivering critical components that meet strict military material standards for vehicle support operations.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 20 hours ago

DEADLINE

Supply of Gasket (NSN 5330016880407)This subcontract involves the procurement of one gasket, identified by NSN 5330016880407, to support DLA supply contracts. The selected provider is responsible for sourcing or manufacturing the component and ensuring it is sealed in a medium duty, waterproof, greaseproof, and opaque bag in accordance with MIL-DTL-117, Type II, Class C, Style 1. The delivery must adhere to strict packaging and marking standards, specifically complying with MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 palletization requirements. Managed by the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support agency, the performance of this contract is located at Fort Carson. A critical administrative requirement for the contractor is maintaining cybersecurity compliance as outlined in NIST SP 800-171. The solicitation is categorized under NAICS code 339991, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 20 hours ago

DEADLINE

Supply of Cummins Gaskets (NSN 5330015859563)This subcontract involves the procurement or manufacture of 24 Cummins gaskets, identified as NSN 5330015859563 and Part 4973102, to support prime contractors fulfilling DLA supply contracts. The items must be delivered FOB Origin and marked according to MIL-STD-129. Packaging requirements specify the use of waterproof, greaseproof, and opaque bags in compliance with MIL-DTL-117, MIL-STD-2073-1E, and RP001. The contract is issued by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament. Successful fulfillment requires strict adherence to the Buy American Act and DLA RA001 quality standards. The opportunity is categorized under NAICS code 339991, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 20 hours ago

DEADLINE

Precision Gasket Supplier (NSN 5330-01-602-1063)This subcontract involves the manufacture and supply of two specialized gaskets for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Land Supplier Opns. The gaskets must be produced in strict accordance with NSN 5330-01-602-1063 and the DLA Master List of Technical and Quality Requirements. Critical material constraints include a total prohibition of asbestos and Class I ozone-depleting chemicals, alongside strict adherence to structural integrity guidelines to prevent bending. The selected supplier must meet rigorous cybersecurity standards, including CMMC Level 2 and NIST SP 800-171 compliance. This opportunity falls under NAICS code 339991, with a response deadline of November 9, 2026. Performance for this contract is designated for FPO 09591.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 20 hours ago

DEADLINE

Supply of Preformed O-Ring (NSN 5331013798931)This subcontract involves the supply of one preformed O-ring packing component, identified by NSN 5331013798931, for the DLA Weapons Support Land Supply Chain. The required part must match Twin Disc part number 201555 or Link-Belt Cranes part number 3H1486. Performance for this contract will take place at Fort Hood, Texas. The provider must ensure strict adherence to MIL-STD-2073-1E packaging standards and comply with DFARS 252.240-7997 regarding NIST SP 800-171 information system security requirements. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026, under NAICS code 339991.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

Supply of Nonmetallic Special Shaped Section Seals (NSN 5330-01-547-5385)This subcontract involves the manufacture or sourcing of precision-engineered nonmetallic special shaped section seals, specifically matching NSN 5330-01-547-5385. The components must be produced using precision molding or extrusion equipment to support prime contractors delivering on DLA supply contracts. The scope of work requires the delivery of one unit per lot to the DLA Distribution DDSP New Cumberland Facility located in Pennsylvania. The contract is issued by the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support agency, falling under NAICS code 339991. To be eligible and ensure payment, contractors must maintain an active SAM registration and utilize the Wide Area Workflow system for all invoicing. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 20 hours ago

DEADLINE

Supply of Packing Retainers (NSN 5330-00-998-0665)This subcontract involves the manufacture or sourcing of 72 packing retainers under NSN 5330009980665 for prime contractors supporting the Department of Defense DLA Weapons Support Land Supplier Operations. The contractor must ensure that additive manufacturing is not used unless specifically approved by the ESA. All units must be individually sealed in medium duty, waterproof, greaseproof, and opaque bags to protect the components from UV deterioration. The project is managed under NAICS code 339991 and is associated with the DLA Weapons Support Land Supplier Operations Vehicle Support agency. Performance of the contract will take place in Tracy, California. Interested parties must adhere to the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 20 hours ago

DEADLINE

Supply of Solid Rubber Sheeting (NSN 9320-01-450-8272)This subcontract involves the supply of three units of solid rubber sheeting, identified by NSN 9320-01-450-8272, to support prime contractors fulfilling Defense Logistics Agency requirements. The materials must be delivered to a specified government location in APO 09309-9998. The contractor is required to adhere to strict operational standards, including RP001 DLA Packaging Requirements for Procurement and RD003 Covered Defense Information standards for the handling of sensitive data. This procurement falls under NAICS code 339991 and is managed through the Department of Defense.

Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE7L3-27-T-1540

This solicitation, issued by the DLA Weapons Support Land Supplier Opns Vehicle Spt, is a request for quotations for the procurement of gaskets under NSN 5330-01-602-1063. The requirement consists of two line items, each for a quantity of one gasket, with a delivery timeframe of 20 days after order. Delivery is specified as FOB Origin, with the final destination being the USS New Jersey (SSN 796) at FPO AE 09591. The response deadline for quotations is November 9, 2026, and the procurement may be subject to an automated award process, with a price evaluation preference available for HUBZone Small Business Concerns. The contract mandates strict adherence to technical and quality standards, including the DLA Master List of Technical and Quality Requirements. Key material restrictions prohibit the use of asbestos and class I ozone-depleting chemicals. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA requirement RP001, specifically including a do not bend marking. Additionally, the contractor must meet cybersecurity standards under CMMC Level 2 and NIST SP 800-171. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and compliance with the Buy American and Balance of Payments Program. Inspection and acceptance will occur at the destination.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE7L1-27-T-2883

Solicitation SPE7L1-27-T-2883 is a small business set-aside request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 138 O-rings, identified by NSN 5331-01-2882586. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, with a required delivery date of June 13, 2027, and a delivery lead time of 215 days after award. The contract is subject to destination inspection and acceptance, and payment must be processed electronically through the Wide Area WorkFlow system. Technical requirements mandate that all supplied items be free of asbestos and that Class I ozone-depleting chemicals are not used. Due to the potential for deterioration from ultraviolet rays, the O-rings must be packaged and sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1, with general packaging and marking adhering to MIL-STD-2073-1E and MIL-STD-129. Contractors must maintain supply chain traceability documentation and provide Safety Data Sheets for any hazardous materials prior to award. The evaluation process considers technical compliance, price, and responsibility, with a specific price evaluation preference for HUBZone concerns. Offers utilizing additive manufacturing are ineligible for award.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE7L3-27-T-1539

Solicitation SPE7L3-27-T-1539 is a request for quotations issued by the Department of Defense, specifically DLA Weapons Support Land Supplier Opns Vehicle Spt, for the procurement of 10 gaskets under NSN 5330-01-687-9713. The requirement is issued under the First Destination Transportation program with a delivery timeframe of 10 days after the award. The procurement is categorized under NAICS code 339991 and may be eligible for automated award, with a price evaluation preference for HUBZone concerns. The contract mandates strict adherence to technical and quality requirements from the DLA Master List, including the prohibition of asbestos. Packaging must comply with MIL-STD-2073-1E and RP001, with specific requirements for items in Federal Supply Classifications 5330/5331 to be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent UV deterioration. Marking must follow MIL-STD-129, and any hazardous materials must be labeled according to the Hazard Communication Standard. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American Act and Berry Amendment. The contract incorporates various FAR and DFARS clauses regarding cybersecurity, including DFARS 252.204-7012 for safeguarding covered defense information and DFARS 252.204-7018 prohibiting certain telecommunications equipment. Inspection and acceptance will occur at the destination. Quotations are due by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

CEMS Event Reporting and Data ManagementThe CEMS Event Reporting and Data Management subcontract involves providing specialized data entry and reporting services for Department of the Air Force F110 engine projects. The selected contractor will be responsible for reporting component status into the Comprehensive Engine Management System in strict accordance with USAF Technical Order 00-25-254-1 to support prime contractors. Managed under the Department of Defense through the Ok DLA Aviation At Oklahoma City, this effort requires personnel to obtain a favorable National Agency Check with Inquiries to ensure authorized access to DoD systems. The primary deliverable for this engagement is the accurate completion of CEMS Event Reporting entries.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

in about 1 month

Aviation Component Inspection and Test ServicesThe Aviation Component Inspection and Test Services subcontract involves performing critical inspections and testing for prime contractors supporting Department of the Air Force F110 engine projects. The primary objective is to certify that temperature sensors adhere to Critical Safety Item standards through rigorous testing conducted according to engineering drawings. The selected provider must utilize precision calibration equipment to generate detailed written documentation and material certifications. To qualify for this engagement, contractors must hold either AS9100 or ISO 9001-2015 certification. The scope of work culminates in the delivery of certified inspection and test reports to the Department of Defense via the Ok DLA Aviation office in Oklahoma City. Responses for this opportunity are due by December 2, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

in about 1 month

F110 Engine Temperature Sensor ProductionThis subcontract involves the production and supply of 32 finished temperature sensors, identified by NSN 2915-01-485-7506PR, for prime contractors supporting Department of the Air Force F110 engine projects. The selected provider must manufacture the sensors in strict accordance with Engineering Drawing, ECP, and ECO specifications, while ensuring full supply chain traceability and the implementation of IUID marking. To qualify, the contractor must hold AS9100 or ISO 9001-2015 certification and adhere to rigorous Critical Safety Item standards. Final deliverables must include comprehensive inspection and test records to verify compliance. The opportunity is managed through the Department of Defense via DLA Aviation at Oklahoma City, with a response deadline of December 2, 2026.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

DEADLINE

in about 1 month

Aerospace NDT Inspection and Quality ValidationThe Aerospace NDT Inspection and Quality Validation subcontract involves providing specialized non-destructive testing services for prime contractors supporting Department of the Air Force F110 engine projects. The scope of work includes performing ultrasonic testing, X-ray radiographic testing, magnetic particle inspection, and dye penetrant inspection utilizing ultrasonic transducers and X-ray machinery. The selected provider is responsible for delivering detailed inspection reports and certifications of conformance to ensure all components meet strict quality standards. Managed under the Department of Defense through the Ok DLA Aviation At Oklahoma City, this requirement mandates that the contractor hold NAS410 and AS9100 certifications. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 5, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Aerospace Surface Finishing and CoatingThis subcontract for Aerospace Surface Finishing and Coating involves providing specialized coatings, plating, and surface treatments for prime contractors supporting Department of the Air Force F110 engine projects. The scope of work includes the application of thermal sprays, anodizing, and aerospace coatings utilizing vacuum chambers and plating tanks to enhance wear resistance and prevent corrosion on rotor components. Managed by the Department of Defense through the Ok DLA Aviation At Oklahoma City, the contract requires the provider to maintain Nadcap accreditation to ensure industry quality standards. The solicitation was posted on October 28, 2026, with a response deadline of November 5, 2026, falling under NAICS code 332813.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Precision CNC Machining of Fan RotorThis subcontract involves the precision CNC machining of fan rotors for prime contractors supporting Department of the Air Force F110 engine projects. The scope of work includes turning, milling, boring, and drilling based on original design drawings, utilizing high-precision 5-axis CNC mills and large-scale lathes to deliver finished rotor components. Managed by the Department of Defense through the DLA Aviation office in Oklahoma City, the project falls under NAICS code 332710. To ensure strict quality and safety standards for aerospace components, the performing contractor must maintain both AS9100 and ISO 9001 certifications.

POSTED

DEADLINE

Aerospace Grade Raw Material Supply (Fan Rotor Alloys)This subcontract, managed by the Department of Defense through DLA Aviation at Oklahoma City, involves the supply of raw aerospace-grade alloys for Department of the Air Force F110 engine projects. The scope of work includes the sourcing, smelting, and forging of titanium or nickel-based superalloy raw billets and ingots to meet strict military and aerospace material specifications. To ensure quality and regulatory adherence, the provider must maintain AS9100 certification and comply with DFARS specialty metals requirements. All deliveries must be accompanied by comprehensive material certifications and Mill Test Reports. The opportunity was posted on October 28, 2026, with a response deadline of November 5, 2026, under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Aerospace Component Packaging and ShippingThis subcontract for Aerospace Component Packaging and Shipping supports Department of the Air Force F110 engine projects through the Ok DLA Aviation At Oklahoma City. The scope of work involves providing specialized packaging and shipping services for prime contractors, specifically focusing on the secure transport of rotors to Tinker AFB. Key technical requirements include the use of vacuum sealing equipment for moisture barrier packaging and the creation of custom crating for oversized precision parts. All operations must maintain strict compliance with MIL-STD-2073 standards to ensure the integrity of aerospace components. The opportunity is categorized under NAICS code 484220 and was posted on October 28, 2026, with a response deadline of November 5, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

CSI-Compliant Bag/Tag Marking and Packaging ServicesThis subcontract for the Department of Defense, specifically Ok DLA Aviation At Oklahoma City, involves providing specialized IUID marking and military-grade packaging services for prime contractors. The scope of work requires the execution of Bag/Tag marking in strict accordance with MIL-STD-130, with a critical requirement that no direct marking be applied to Critical Safety Items. All shipments must be packaged and marked following MIL-STD-2073-1 and MIL-STD-129 standards using IUID-compliant labeling systems. The project deliverables consist of five IUID-marked and packaged units prepared for FOB Origin shipment. This opportunity falls under NAICS code 561910 and was posted on October 28, 2026, with a response deadline of November 27, 2026.

Packaging and Labeling Services

POSTED

DEADLINE

Manufacture of Turbine Nozzle Supports (Critical Safety Item)This subcontract involves the manufacture of five turbine nozzle supports designated as Critical Safety Items for prime contractors supporting DLA Aviation. The components must be fabricated to match MPNs 07482 1386M15G20 or 51992 1386M15G20, utilizing either aerospace casting or precision CNC machining in strict accordance with technical documents F3YTBK5157A006 and FD20302402216. To qualify, the manufacturer must hold ISO 9001-2015 certification and demonstrate full compliance with DFARS 252.204-7012 and NIST SP 800-171 security standards. The project falls under NAICS code 336413 and is managed through the Department of Defense for the DLA Aviation office in Oklahoma City.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

SUPPORT,TURBINE NOZ

Solicitation # SPRTA127Q0033

Solicitation SPRTA127Q0033 is a firm fixed price requirement issued by the Department of Defense, specifically the DLA Aviation office at Tinker AFB, for the procurement of five units of Support, Turbine Noz (NSN 2840-01-347-2206 PR). The items must conform to manufacturer part numbers 07482 1386M15G20 or 51992 1386M15G20 and are designated as Critical Safety Items. Due to this designation, direct marking is prohibited, and the only authorized method for Item Unique Identification (IUID) is Bag/Tag in accordance with MIL-STD-130. The procurement is associated with Foreign Military Sales Case GR-D-SBD and requires compliance with ISO 9001-2015 quality standards. The contract emphasizes strict packaging and marking standards, requiring adherence to MIL-STD-2073-1 for packaging and MIL-STD-129 for shipping and storage markings. Delivery is set as FOB Origin. Evaluation of offers will be primarily based on price and cost, with the contracting officer also considering SPRS risk assessments regarding item, price, and supplier performance. Offerors must maintain active SAM registration, including a valid UEI and CAGE code, and comply with cybersecurity requirements under DFARS 252.204-7012 and NIST SP 800-171. Inspection and acceptance will occur at the origin, with all reporting submitted via Wide Area Workflow.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

ROTOR, FAN_End_Item_F110_NSN_2840015807062PR_PN_9547M28G15

Solicitation # FD20302700073

The Department of the Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research via a Sources Sought Synopsis to identify potential sources for the spares procurement of F110 fan rotors, identified by NSN 2840-01-580-7062PR and Part Number 9547M28G15. This effort is intended to determine if the requirement can be competitive or a small business set-aside, specifically considering small, disadvantaged, women-owned, HUBZone, and veteran-owned businesses under NAICS code 336412. The scope of work involves the new manufacture of the items, including all necessary labor, materials, inspection, testing, packaging, and shipping. Potential sources must adhere to the Manufacture Qualification Requirements for Propulsion Critical Safety Items and Critical Application Items to obtain Engineering Support Activity approval. This process requires the submission of a Source Approval Request, a valid Company Profile, and proposed production documents such as Travelers, Process Operation Sheets, and Inspection Method Sheets. Additionally, sources must provide a valid Quality Assurance Certificate, such as ISO 9001, AS9100, or NATO AQAP-2070. This notice is for market research purposes only; there is currently no solicitation available, and no contract will be awarded based solely on this information.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

RETAINER,PACKING

Solicitation # N0010425QFE63

Navsup Weapon Systems Support Mech

POSTED

over 1 year ago

CLOSED

over 1 year ago

Solicitation # SPE7LX25U7300

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

Solicitation # SPE7LX25U7646

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

53--SEAL RING,METAL

Solicitation # SPE7LX25U7694

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

53--SEAL,FAIRING

Solicitation # SPE7LX25U7620

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

Solicitation # SPE7LX25U7609

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

Solicitation # SPE7LX25U7607

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

Solicitation # SPE7M425T230T

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

53--RETAINER,PACKING

Solicitation # SPE7L325T236C

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

53--SEAL,NONMETALLIC SP

Solicitation # SPE4A625T02KM

POSTED

over 1 year ago

CLOSED

over 1 year ago

53--SEAL ASSY,MAGNETIC

Solicitation # SPE7LX25U7650

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

53--RETAINER,PACKING

Solicitation # SPE7LX25U7696

DLA Land And Maritime

POSTED

over 1 year ago

CLOSED

over 1 year ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS