Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SEAL ASSEMBLY, CARTR

Active
SPE7MC-26-T-221HFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of two cartridge seal assemblies, identified by NSN 4810-01-111-6232 and Meggitt North Hollywood part number 139247. These components are designated as critical application items used on motor actuated fluid pressure regulators with ethylene glycol/water solution media for C-141 aircraft. The delivery is required within 59 days after order, with a need ship date of November 3, 2026, and a final required delivery date of December 31, 2026. The items must be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements for procurement. Quality and technical standards are governed by the DLA Master List of Technical and Quality Requirements, and the contract specifies that government identification must be removed from any non-accepted supplies. Inspection and acceptance will take place at the destination.

General Info

Procurement of two C-141 cartridge seal assemblies delivered to Tinker AFB by 2026.

Agency

Department Of Defense → DEPOT OKLAHOMAView Agency

NAICS

332911 - Industrial Valve ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

(1)

SPE7MC-26-T-221H.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DEPOT OKLAHOMA
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → DEPOT OKLAHOMA
View Agency Profile
Office AddressUSA
Contacts
CONNOR ROY
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SEAL ASSEMBLY,CARTR
SEAL ASSEMBLY, CARTRIDGE.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
USED ON MOTOR ACTUATED FLUID PRESSURE REGULATOR, MEDIA ETHYLENE
GLYCOL/WATER SOLUTION.
E/I C-141 AIRCRAFT.
CRITICAL APPLICATION ITEM
MEGGITT NORTH HOLLYWOOD INC 79318 P/N 139247
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016691421 0001 EA 2.000
NSN/MATERIAL:4810011116232
DELIVERY (IN DAYS):0059
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
SPE7MC-26-T-221H
SECTION B
PR: 7016691421 PRLI: 0001 CONT’D
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:11/03/2026 Original Required Delivery Date:12/31/2026
SPE7MC-26-T-221H NSN/Part Number: 4810-01-111-6232 Quantity: 2 EA Purchase Request: 7016691421QTY: 2 Delivery: 59 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332911
New
DIBBS
PARTS KIT, VALVE
Solicitation # SPE4A7-26-T-648T
Solicitation SPE4A7-26-T-648T is a request for quotations issued by the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, for the procurement of 18 valve parts kits (NSN 1660-01-056-8974, P/N 651234-2). The contract specifies a delivery schedule of 521 days after receipt of order, with a required delivery date of January 24, 2028. Shipping is designated as FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E for preservation and MIL-STD-129 for marking and bar-coding. Because these are kits, they must be packaged in a single box with a detailed contents list including NSNs, part numbers, and quantities. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, and the use of Class 1 ODS is prohibited. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding hazardous materials, radioactive material handling, and the safeguarding of covered defense information.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 332911
New
DIBBS
DISK, VALVE
Solicitation # SPE7MC-26-T-224K
This solicitation, numbered SPE7MC-26-T-224K, is issued by the Department of Defense for the procurement of eight valve disks under NSN 4820-01-406-2282. The contract requires delivery within 101 days after receipt of the order, with the place of performance located in New Cumberland. Responses to this solicitation are due by September 4, 2026. A critical component of this contract is the strict adherence to export control regulations. The technical data associated with these items is subject to ITAR or EAR restrictions, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Department of Commerce. To access this data, contractors must possess an approved US/Canada Joint Certification Program certification and complete specific DLA export-control training and questionnaires.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
SEAT, VALVE
Solicitation # SPE7MC-26-T-221T
This contract is a total small business set-aside solicitation for the procurement of 15 valve seats used in turbine-driven fan ventilation steam systems. The items are identified by NSN 4820-00-956-1477 and correspond to several Steward Machine Co Inc part numbers, including 591-607, 60-591PC607, and 60-773PC607. This is designated as a critical application item with a required delivery date of November 24, 2025, and a delivery timeline of 57 days after order. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129, with delivery set as FOB Origin and inspection and acceptance occurring at the destination. A key environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA. Shipments are to be delivered to the DLA Distribution New Cumberland facility in Pennsylvania.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-224H
This contract is for the procurement of seven safety relief valves, identified by NSN 4820-01-219-9997. The valves must feature a bronze body, monel trim, and 2-inch sil-braze union ends per MIL-F-1183, with a pressure rating of 400 PSI at 150 degrees Fahrenheit and an adjustable pressure range of 55 to 68 PSI. Technical requirements include Teflon O-rings with EPR union O-rings, a bronze O-ring retainer for the union nut, and a capacity of 150 GPM at 55 PSI. The items are designated as critical application items and must comply with MIL-DTL-24332A, including mandatory shock and vibration testing. The agreement specifies strict quality and environmental standards, prohibiting the intentional addition of mercury or Class I ozone-depleting chemicals. Inspection and acceptance will occur at the origin, with sampling conducted according to MIL-STD-1916 or ASQ H1331. The contract includes a First Article Test requirement and mandates packaging and marking in accordance with MIL-STD-2073-1E and MIL-STD-129. Delivery is FOB Origin to DLA Distribution San Diego, with a delivery timeline of 356 days.
SAN DIEGO

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, STOP-CHECK
Solicitation # SPE7MC-26-T-224N
This contract is for the procurement of five stop-check valves, identified by NSN 4820015123988 and Milwaukee Valve Co part number 1042-001J 600. The solicitation, numbered SPE7MC-26-T-224N, specifies a delivery timeframe of 164 days after order, with a required delivery date of April 30, 2028. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements, MIL-STD-2073-1E for delivery preparation, and MIL-STD-129 for marking. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions. Additionally, the contract notes that casting or forging may be required for manufacture, and contractors may need to submit a Casting and Forging Assistance Request if special tooling is unavailable.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-T-223C
This contract is for the procurement of 201 units of a check and relief valve, identified by NSN 4820001526195, for use in Detroit Diesel Mode 3-53, 6V53T engines. This is a critical application item with specific technical requirements, including an operating temperature range from minus 65 to 200 degrees Fahrenheit and precise pressure and air flow specifications. Manufacturing may require specialized casting or forging tooling, for which the government may not provide assistance. The solicitation is set aside for Women-Owned Small Businesses and requires delivery to the DLA Distribution New Cumberland facility in Pennsylvania. The contract specifies a delivery timeframe of 141 days, with a required delivery date of November 15, 2025. All supplies must adhere to strict packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, and must comply with the DLA master list of technical and quality requirements.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVE
Solicitation # SPE7MC-26-T-224J
This contract is for the procurement of two valve disks, identified by NSN 4820013810297 and associated with Emerson Automation Solutions. This is a restricted source item and a critical application item that requires engineering source approval by the government design control activity. The procurement is governed by technical and quality requirements set forth in the DLA Master List, with specific prohibitions against the use of Class I ozone depleting chemicals and the intentional addition of mercury or mercury containing compounds, except for specific functional exceptions. The delivery is set for FOB Origin with inspection and acceptance also occurring at the origin. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, including specific oxygen clean packaging and marking requirements. The items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a required delivery date of November 29, 2028, and a need ship date of February 16, 2027.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-T-187B
The contract is for the procurement of 202 units of a check valve identified by NSN 4820-01-231-6654 and part number 8KK352 from OSHKOSH DEFENSE LLC, classified as a critical application item. The valve must meet a thermal relief set pressure of 3000 PSI plus or minus 200 PSI and operate at a maximum temperature of 180 degrees Fahrenheit. All supplies must comply with technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the version effective on the award date controlling. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and NAVSEA-specified chemical reagents; portable devices containing mercury must be shock-proof with a secondary containment barrier per NAVSEA 5100-003D. The item must be packaged in accordance with ASTM D3951 and labeled and palletized per MIL-STD-129 and RP001 DLA Packaging Requirements, with hazardous material containers labeled per the Hazard Communication Standard (29 CFR 1910.1200). A Safety Data Sheet is required prior to award, and failure to submit it will render the offeror nonresponsible and ineligible. Delivery is due 188 days after order date, FOB Origin, to the DDSP New Cumberland Facility in Pennsylvania, with destination inspection and acceptance governed by FAR 52.246-2. Payment must be processed electronically through WAWF in accordance with DFARS clauses 252.232-7003 and 252.232-7006. The solicitation incorporates numerous FAR and DFARS clauses addressing cybersecurity, whistleblower rights, labor standards, export control, prohibited materials like hexavalent chromium and covered telecommunications equipment, and compliance with NIST SP 800-171. The procurement is a small business set-aside with HUBZone price evaluation preference applied, and quotes must be submitted via the DIBBS portal by the closing date, with offerors encouraged to provide quantity ranges due to demand variability.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 332911
New
DIBBS
LAMELLAR VALVE
Solicitation # SPE7MC-26-T-223V
This contract is for the procurement of 19 units of a Lamellar Valve, identified as NSN 4820-01-562-8898 and Sauer Compressors USA Inc. part number 037158. This is a critical application item under solicitation SPE7MC-26-T-223V, set aside for Service-Disabled Veteran-Owned Small Businesses. The delivery is required within 164 days, with a need ship date of February 16, 2027, and an original required delivery date of May 28, 2027. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements and technical quality standards. Inspection and acceptance will take place at the destination, and the contract specifies a zero percent quantity variance.
DLA DIST SAN JOAQUIN

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, GLOBE
Solicitation # SPE7MC-26-T-186N
The contract is for the procurement of one globe valve, model 316 stainless steel with a 1/4 inch female NPT connection, identified by NSN 4820010422921, to be delivered to the USS THEODORE ROOSEVELT CVN 71 at FPO AP 96632 under FOB destination terms. Delivery is due within 20 days of government direction, with an original required delivery date of August 10, 2026. The valve must comply with Federal Specification MIL-V-3 for preservation and packaging, and all packaging must adhere to MIL-STD-2073-1E and DLA’s RP001 packaging requirements, with preservation method ZZ requiring Level A preservation as defined in the commodity specification. Marking must follow MIL-STD-129, with no special marking required, and palletization must conform to DLA standards. The product must not contain intentional mercury or mercury-containing compounds except as specifically exempted for functional uses in batteries, instruments, or chemical reagents, and any portable mercury-containing devices must include shock-proof design and a secondary containment as mandated by NAVSEA 5100-003D. The contract is a simplified acquisition under the Defense Logistics Agency and is expected to be awarded automatically based on Lowest Price Technically Acceptable criteria. Compliance with all applicable clauses is mandatory, including employment equity under 52.222-36, anti-trafficking requirements under 52.222-50, sustainable product obligations, hazardous material reporting under 52.223-3 and 252.223-7001, cybersecurity safeguards under 52.240-93 and 252.204-7012, and prohibitions on covered telecommunications equipment under 252.204-7018. The offeror must certify size status, provide a Unique Entity ID and CAGE code, and disclose any covered defense telecommunications equipment. Inspection and acceptance occur at the destination, and payment must be processed through WAWF using standardized invoice and receiving report formats. The contract includes a full suite of FAR and DFARS clauses governing contract administration, changes, subcontracting, liability, and reporting, with no contract price specified in the solicitation, indicating award will be determined upon offer submission and technical acceptability.
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 332911
New
DIBBS
SEAT, VALVE
Solicitation # SPE7MC-26-T-224Y
This contract is a solicitation issued by the Department of Defense via DLA Distribution San Joaquin for the procurement of six valve seats, identified by NSN 4820015503275. The agreement specifies a delivery timeline of 164 days after order, with a need ship date of February 16, 2027, and an original required delivery date of June 26, 2027. The terms stipulate a zero percent quantity variance, with FOB, inspection, and acceptance all occurring at the point of origin. The items must be delivered to the DLA Distribution San Joaquin facility in Tracy, California. Strict packaging and marking requirements are mandated, including compliance with MIL-STD-2073-1E, MIL-STD-129, and specific oxygen clean packaging and marking requirements under IP042. Palletization must adhere to DLA procurement requirements RP001.
DLA DIST SAN JOAQUIN

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
PLUG, ROTARY, VALVE
Solicitation # SPE7M4-26-T-361U
This contract is a solicitation for the procurement of 14 rotary valve plugs, identified by NSN 4820013151045 and associated with Leslie Controls part numbers 24573N and N695300058. The order is managed by the Department of Defense Fluid Handling Division under solicitation number SPE7M4-26-T-361U. Delivery is required within 140 days, with a specified need ship date of January 19, 2027, and a final required delivery date of December 4, 2028. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. It includes a critical prohibition against the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Quality and technical requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → DEPOT OKLAHOMA

Same awarding agency

NAICS: 331491
New
DIBBS
SHEET, METAL
Solicitation # SPE8E4-26-T-2163
This contract is for the procurement of four sheets of 7075-T6 aluminum alloy measuring 0.063 inches thick, 48 inches wide, and 144 inches long. The material must feature a phosphoric acid anodized and primed surface condition and is designated as a critical application item. Compliance with specific technical standards, including ASTM B660 and B666, is required, and the supplier must provide a Certificate of Quality Compliance with every shipment. Eligibility for award is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contract mandates strict adherence to CMMC Level 2 self-assessment, covered defense information protocols, and DLA packaging and marking standards. Delivery is set for 137 days after order, with the final destination being the DLA Distribution Depot Oklahoma at Tinker AFB.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333413
New
DIBBS
FAN, CENTRIFUGAL
Solicitation # SPE8E7-26-T-3670
This contract is for the procurement of 12 centrifugal fans under solicitation SPE8E7-26-T-3670 for the Department of Defense. The valid part number is 026876000 from Rotron Incorporated, cage code 82877, replacing the obsolete part number 026876. Technical specifications include a nominal speed of 5460 RPM, a maximum line current of 1.45 amps, and a maximum locked rotor current of 2.21 amps, with specific decimal tolerances applied to drawing 009-1920. The order is designated as FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Oklahoma at Tinker AFB. Packaging must comply with ASTM D3951 and MIL-STD-129, adhering to DLA master list technical and quality requirements. The required delivery date is June 30, 2027, with a need ship date of May 21, 2027. Certificate of Conformance procedures are authorized per FAR 52.246-15.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
SLEEVE, DIRECTIONAL CON
Solicitation # SPE7MC-26-Q-0421
This contract, solicitation number SPE7MC-26-Q-0421, is for the procurement of 60 units of a directional control linear valve sleeve, identified by NSN 4810-01-243-2542 and Meggitt North Hollywood part number 227758-4. The item is designated as a critical application item and requires a metal casting process for manufacture, which necessitates specific tooling. The agreement is established as a firm fixed price contract with a delivery timeline of 349 days after the order. Compliance requirements include adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. The contractor must also meet Cybersecurity Maturity Model Certification Level 2 self-assessment standards and follow guidelines regarding the removal of government identification from non-accepted supplies. Inspection and acceptance will occur at the destination, with shipping directed to the DLA Distribution Depot Oklahoma.
Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332112
New
DIBBS
CARTRIDGE, DEHYDRATO
Solicitation # SPE8E8-26-T-5265
This contract solicitation, identified as SPE8E8-26-T-5265, is for the procurement of 157 dehydrator cartridges, classified under NSN 4440-01-543-3575. The acquisition is designated as a Total Small Business Set-Aside and is managed by the Department of Defense through the DLA Distribution Depot Oklahoma at Tinker AFB. The required delivery timeframe is 64 days, with a specific need date of August 19, 2026. The items must be delivered FOB Origin, with inspection and acceptance occurring at the destination. Strict technical and quality compliance is required, including adherence to DLA packaging requirements and specific source control documentation. Approved sources include Lockheed Martin Corporation and AGM Container Controls Inc, though other offerors must obtain formal source approval from the OEM to qualify. The contract mandates compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 and prohibits the use of Class I ozone-depleting chemicals. Additionally, the products must be marked in accordance with MIL-STD-129 and include special markings for electrostatic discharge (ESD) sensitive electronic devices.
Nonferrous Forging

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 331110
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2145
This contract is a solicitation for the procurement of steel composite metal bars, specifically rolled round bars with a 5.250-inch diameter and a weight of 73.60 lb/ft. The material must be supplied in lengths between 10 and 12 feet, provided in whole-foot increments only. The procurement is subject to strict quality and technical requirements, including the necessity for a Certificate of Quality Compliance (Mill-Material Certification) to be provided with every shipment. Furthermore, the contract mandates continuous identification markings on each unit, including the DLA contract delivery order number, NSN, specification number, grade, alloy, manufacturer details, and dimensions. Eligibility for this award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for Federal Supply Groups 95 and 96. Compliance with DLA packaging requirements and MIL-STD-129 marking standards is mandatory, with specific instructions for stenciling or stamping to ensure legibility and stability. The delivery destination is the DLA Distribution Depot Oklahoma at Tinker AFB, with a required delivery timeline of 167 days. Failure to adhere to the specified marking, packaging, or supplier qualification requirements may result in product rejection or legal penalties.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC SPECIAL SH
Solicitation # SPE8E5-26-T-4010
This solicitation from the Department of Defense, specifically Depot Oklahoma, is for the procurement of 214 feet of nonmetallic special shaped sections under solicitation number SPE8E5-26-T-4010. The required material must be provided in minimum lengths of 10 feet. The contract is subject to strict security and regulatory compliance, including the requirement for a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization and the handling of covered defense information. The technical data associated with this item is subject to export controls under either the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). Consequently, contractors must possess an approved US/Canada Joint Certification Program certification and have completed specific Department of Defense training and questionnaires to access and handle the data. Delivery is required within 167 days after the date of order, and the solicitation period is scheduled to close on August 31, 2026.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 331491
New
DIBBS
PLATE, METAL
Solicitation # SPE8E4-26-T-2148
This contract is for the procurement of aluminum alloy metal plates, specifically Alloy 7050 with a T7451 temper. The material must meet exact dimensions of 0.750 inches in thickness, 36.00 inches in width, and 96.00 inches in length. A critical requirement is that the material must undergo ultrasonic inspection, and the corresponding inspection report must be included with the Certificate of Compliance and test reports upon shipment. The order consists of 6 units, with delivery expected within 153 days to the DLA Distribution Depot Oklahoma at Tinker AFB. Eligibility for this award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for Federal Supply Groups 95 and 96. Suppliers must adhere to rigorous documentation and marking standards, including providing a Certificate of Quality Compliance and continuous identification markings such as the contract number, NSN, specification, alloy, and manufacturer details. Markings must be legible, waterproof, and applied via stamping or stenciling. Additionally, the contract incorporates specific technical and quality requirements, packaging standards per DLA and ASTM B660, and mandates that no test coupons be accepted.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 531070
DIBBS
Specialized Metal Packaging and Military ShippingThis subcontract involves the specialized packaging and transportation of aluminum sheets to the DLA Distribution Depot Oklahoma at Tinker AFB. The contractor is responsible for ensuring all packaging meets military compliance standards and managing the logistics from the point of origin to the final destination in Oklahoma. Key administrative requirements include the use of Wide Area Workflow for invoicing and the implementation of rigorous delivery tracking. The opportunity is categorized under NAICS code 531070 and is managed by the Department of Defense. Interested parties must submit responses by August 27, 2026.

POSTED

9 days ago

DEADLINE

in 2 days
View Details
NAICS: 541690
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe Hazardous Materials Compliance and Labeling Services subcontract, issued by the Department of Defense for Depot Oklahoma, focuses on the preparation of hazard communication labels and Material Safety Data Sheets. The primary objective is to ensure all defense logistics shipments are in full compliance with OSHA HAZCOM and MIL-STD-129 standards. This opportunity is categorized under NAICS code 541690 and will be performed at Tinker AFB in Oklahoma. Interested parties must submit their responses by the deadline of August 27, 2026.
Other Scientific and Technical Consulting Services

POSTED

9 days ago

DEADLINE

in 2 days
View Details
NAICS: 331314
DIBBS
Precision Aluminum Alloy Sheet ManufacturingThis subcontract involves the manufacture and delivery of 14 precision aluminum alloy Alclad 7075-T6 sheets for the Department of Defense. The materials must strictly adhere to military and aerospace standards regarding composition, strength, and surface quality. The project is managed by Depot Oklahoma and will be performed at Tinker AFB in Oklahoma. Interested parties must submit their responses by August 27, 2026, under NAICS code 331314.
Secondary Smelting and Alloying of Aluminum

POSTED

9 days ago

DEADLINE

in 2 days
View Details
NAICS: 332911
DIBBS
Supply of Safety Relief Valves (NSN 4820005294181)This subcontract involves the manufacture and delivery of seven safety relief valves under NSN 4820005294181 for critical application at Tinker Air Force Base. The project is managed by the Department of Defense through Depot Oklahoma and requires strict compliance with military specifications. The opportunity is designated as a total small business set-aside under FAR 19.5, falling under NAICS code 332911. Interested parties must submit their responses by August 27, 2026, for performance at the Tinker AFB location in Oklahoma.
Industrial Valve Manufacturing

POSTED

9 days ago

DEADLINE

in 2 days
View Details
NAICS: 331110
DIBBS
SHEET, METAL
Solicitation # SPE8E4-26-T-2124
This contract is for the procurement of 14 sheets of aluminum alloy alclad metal, specifically alloy 7075 temper T6. The material must be 0.012 inches thick, 24 inches wide, and 72 inches long, with a cladding thickness of 0.0005 inches on both sides. This is designated as a critical application item and must strictly adhere to the specified dimensions, as test coupons are not permitted. Eligible awardees must be listed on the Qualified Suppliers List for Distributors (QSLD). The supplier is required to provide a Certificate of Quality Compliance with every shipment and follow rigorous marking and packaging standards, including MIL-STD-129 and ASTM B660. Delivery is set for 157 days after the order, with the final destination being the DLA Distribution Depot Oklahoma at Tinker AFB.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

9 days ago

DEADLINE

in 3 days
View Details