Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

SEAL ASSEMBLY, CARTRIDG

Open
SPE7MC-27-T-2002Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7MC-27-T-2002 is a small business set-aside request for quotations issued by the DLA Weapons Support Maritime Hardware/Electrical for the procurement of three cartridge seal assemblies. These critical application items, identified by NSN 4810-01-111-6232 and Meggitt North Hollywood Inc part number 139247, are used on motor actuated fluid pressure regulators with ethylene glycol/water solution media for C-141 aircraft. The contract specifies a delivery period of 161 days, with a need ship date of May 4, 2027, and a required delivery date of July 21, 2027. Delivery is FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Oklahoma at Tinker AFB. The contractor must adhere to strict packaging and marking standards, utilizing ASTM D3951 and MIL-STD-129, while ensuring that DLA Master List of Technical and Quality Requirements take precedence. Palletization must comply with RP001. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment requests. The contract incorporates various FAR and DFARS clauses, including mandates for safeguarding covered defense information, prohibitions on certain telecommunications equipment, and compliance with the Buy American Act and the Berry Amendment.

General Info

Small business procurement of three cartridge seal assemblies for C-141 aircraft components.

Agency

Department Of Defense → DEPOT OKLAHOMA

NAICS

332911 - Industrial Valve Manufacturing

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DEPOT OKLAHOMA
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DEPOT OKLAHOMA
Office AddressUSA
Contacts
Paula Mcclary
Sign up to see this detail
Sign up to see this detail

Full Description

Show more
SEAL ASSEMBLY,CARTRIDGE
SEAL ASSEMBLY, CARTRIDGE.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
USED ON MOTOR ACTUATED FLUID PRESSURE REGULATOR, MEDIA ETHYLENE
GLYCOL/WATER SOLUTION.
E/I C-141 AIRCRAFT.
CRITICAL APPLICATION ITEM
MEGGITT NORTH HOLLYWOOD INC 79318 P/N 139247
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7019024810 0001 EA 3.000
NSN/MATERIAL:4810011116232
DELIVERY (IN DAYS):0161
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
SPE7MC-27-T-2002
SECTION B
PR: 7019024810 PRLI: 0001 CONT’D
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:05/04/2027 Original Required Delivery Date:07/21/2027
SPE7MC-27-T-2002 NSN/Part Number: 4810-01-111-6232 Quantity: 3 EA Purchase Request: 7019024810QTY: 3 Delivery: 161 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332911
New
DIBBS
Supply of Safety Relief Valves (P/N SP10-21-0-N-24ER)
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

28 minutes ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
Bronze Gate Valve Fabrication and Supply
Defense Logistics Agency

POSTED

28 minutes ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
Stop-Check Valve Supply (NSN 4820016541534)
DDSP NEW CUMBERLAND FACILITY

POSTED

28 minutes ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
BODY, VALVE
Solicitation # SPE7M1-27-T-2562
Solicitation SPE7M1-27-T-2562 is a procurement issued by the Defense Logistics Agency (DLA) Weapons Support Maritime Supply Chain for the acquisition of two valve body housings (NSN 4820-01-089-1939). The contract specifies a need ship date of March 4, 2025, with a final required delivery date of June 25, 2025. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, DLA Dist San Joaquin in Tracy, California. The procurement is categorized under NAICS code 332911 and requires strict adherence to the Buy American and Balance of Payments Program for quotes exceeding the micro-purchase threshold. Technical and quality requirements are governed by the DLA Master List, with specific packaging and marking mandates. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129. A critical safety requirement prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and receiving reports, and offerors must maintain active registration in the System for Award Management (SAM).
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

28 minutes ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, FLOW CONTROL
Solicitation # SPE7MC-27-T-1996
Solicitation SPE7MC-27-T-1996 is a Request for Quotations issued by the Defense Logistics Agency for the procurement of two flow control valves, identified by NSN 4820-01-515-2917. The contract specifies a required delivery date of July 8, 2026, with a delivery lead time of 10 days. The items are to be delivered FOB Origin, with the final destination located at Camp Denali, Fort Richardson, Alaska. Inspection and acceptance will occur at the destination, and the contractor is required to use the Wide Area WorkFlow system for electronic invoicing and payment requests. The contract mandates strict adherence to DLA packaging requirements (RP001) and MIL-STD-129 for marking and labeling. Technical and quality requirements are governed by the DLA Master List, and specific restrictions prohibit the intentional addition of mercury to hardware, except for specified functional uses. Key regulatory clauses include the Buy American Act, the Berry Amendment, and NIST SP 800-171 for cybersecurity assessment. Additionally, the contractor must comply with hazardous material labeling standards under 29 CFR 1910.1200 and ensure that no additive manufacturing processes are used unless specifically authorized.
Defense Logistics Agency

POSTED

28 minutes ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, LINEAR, DIRECTION
Solicitation # SPE7M1-27-T-2589
Solicitation SPE7M1-27-T-2589, issued by the DLA Weapons Support Maritime Supply Chain, is a small business set-aside for the procurement of one linear directional control valve. The required item is an Allison Transmission Inc part number 29558445 with NSN 4810016898109. The contract specifies a delivery timeline of five days after order, with an original required delivery date of November 12, 2026. Delivery is FOB Origin, and the shipment must be sent via the fastest traceable means to EGLIN AFB, FL, with inspection and acceptance occurring at the destination. The contractor must adhere to strict packaging and quality standards, including ASTM D3951 and MIL-STD-129, while ensuring that DLA Master List of Technical and Quality Requirements take precedence. The use of Class I ozone depleting chemicals is prohibited. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment requests. Additionally, the contract incorporates various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

28 minutes ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, ROTARY, SELECTOR
Solicitation # SPE7M0-27-T-1249
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

28 minutes ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
CAP, VALVE
Solicitation # SPE7MC-27-T-1974
Solicitation SPE7MC-27-T-1974 is a small business set-aside request for quotations issued by the DLA Weapons Support Maritime Hardware/Electrical for the procurement of five valve caps under NSN 4820-01-735-5934. The required delivery date and need ship date are both set for June 27, 2027, with a delivery timeframe of 215 days. The items are designated as critical application items, and the contract specifies a destination inspection and acceptance point. Shipping is handled as FOB Origin, with the final delivery destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The procurement is subject to strict technical and quality requirements, including FAA airworthiness approval and supply chain traceability documentation. Prohibitions are in place regarding the use of Class I ozone-depleting substances and the intentional addition of mercury, except for specific functional uses that must meet NAVSEA 5100-003D containment standards. Packaging must adhere to MIL-STD-2073-1E and RP001, while marking must comply with MIL-STD-129. Administratively, the contract utilizes the Wide Area WorkFlow system for invoicing and incorporates various FAR and DFARS clauses covering cybersecurity, the Buy American Act, and NIST SP 800-171 assessment requirements.
DDSP NEW CUMBERLAND FACILITY

POSTED

28 minutes ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7L5-27-T-0705
Solicitation SPE7L5-27-T-0705, issued by the DLA Weapons Support Land Supplier Opns Engines, is for the procurement of 23 safety relief valves, part number SP10-21-0-N-24ER from Hydraforce Inc. The contract specifies a need ship date of May 4, 2027, with a required delivery date of May 23, 2027. Delivery is established as FOB Origin, with both the inspection and acceptance points located at the destination: DLA Dist San Joaquin in Tracy, California. The procurement is subject to strict technical and quality requirements, including the prohibition of Class I ozone depleting chemicals and hexavalent chromium. Packaging must adhere to ASTM D3951 and RP001, while marking and labeling must comply with MIL-STD-129 and the Hazard Communication Standard for any hazardous materials. Administratively, the contract requires the use of the Wide Area WorkFlow system for invoicing and incorporates various DFARS and FAR clauses regarding cybersecurity reporting, the Buy American Act, and the prohibition of covered defense telecommunications equipment. All quotes must be submitted via the DIBBS portal.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

28 minutes ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVE
Solicitation # SPE7MC-27-T-2001
Solicitation SPE7MC-27-T-2001 is a Small Business Set-Aside procurement issued by the Defense Logistics Agency (DLA) for two 8-inch valve disks (NSN 4810-01-189-3413). These disks are designed for use on an 8X4X2 valve, N manifold that is motor operated and electric interlocked. The required material is Nickel, Copper Alloy QQ-N-288 Comp. E. The item is designated as a critical application item, and the manufacturing process requires metal casting and specific tooling. Notably, the use of additive manufacturing is strictly prohibited, and any offers utilizing such processes will be ineligible for award. The contract mandates strict quality and security compliance, requiring the manufacturer's inspection system to meet SAE AS9003 or ISO 9001 standards. Cybersecurity requirements include CMMC Level 2 certification via self-assessment or a third-party assessment organization. Due to the nature of the technical data, the item is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Delivery is FOB Destination to DLA Dist San Joaquin in Tracy, California, with a need ship date of May 4, 2027. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, and all payment requests must be processed electronically through the Wide Area WorkFlow system.
DLA DIST SAN JOAQUIN

POSTED

28 minutes ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CALIBRATED FL
Solicitation # SPE7MC-27-T-2005
Solicitation SPE7MC-27-T-2005 is a small business set-aside procurement issued by the Defense Logistics Agency for one calibrated flow valve, NSN 4820016866979, intended for delivery to the USS COOPERSTOWN LCS 23. The contract requires delivery within 20 days, with a required delivery date of June 23, 2026. Terms are FOB Destination, with both inspection and acceptance occurring at the destination. The procurement is categorized under NAICS code 332911 and specifies that parts produced via additive manufacturing are not permitted unless specifically authorized. Technical and quality requirements are governed by the DLA Master List, which takes precedence over the required ASTM D3951 packaging standards. All shipments must be marked and labeled according to MIL-STD-129 and palletized per RP001 requirements. The contract incorporates several critical FAR and DFARS clauses, including mandates for cybersecurity safeguarding, the Buy American Act, and prohibitions on ozone-depleting chemicals and covered defense telecommunications equipment. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.
Defense Logistics Agency

POSTED

28 minutes ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-27-T-1970
Solicitation SPE7MC-27-T-1970 is a small business set-aside issued by the Defense Logistics Agency for the procurement of 10 pilot check valves under NSN 4820-00-087-2060. This is a Foreign Military Sales requirement for the Jordan Armed Forces, with delivery scheduled for March 10, 2025, via Serra International Inc. Inspection and acceptance will occur at the origin. The contract is a fixed-price acquisition requiring the use of the Wide Area WorkFlow system for invoicing and payment. The procurement is subject to strict export controls under ITAR and EAR, requiring contractors to hold an approved US/Canada Joint Certification Program certification. Technical requirements include compliance with MIL-STD-129 for marking and Special Packaging Instruction P11602192 for preservation. Additionally, the contractor must adhere to CMMC Level 2 cybersecurity standards and DFARS 252.204-7012 for safeguarding covered defense information. Domestic material restrictions, including the Buy American Act and the Berry Amendment, apply to all quotes above the micro-purchase threshold.
Defense Logistics Agency

POSTED

28 minutes ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → DEPOT OKLAHOMA

Same awarding agency

NAICS: 331210
New
DIBBS
Metal Bars, Tubes, and Shapes Supply
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

28 minutes ago

DEADLINE

in 12 days
View Details
NAICS: 332311
New
DIBBS
Aluminum Alloy Sheet Supply (Alloy 7075-T6)
Prefabricated Metal Building and Component Manufacturing

POSTED

28 minutes ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
Nonmetallic Rod Manufacturing and Supply
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

28 minutes ago

DEADLINE

in 12 days
View Details
NAICS: 493110
New
DIBBS
MIL-SPEC Packaging and Palletization Services
General Warehousing and Storage

POSTED

28 minutes ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
Cartridge Seal Assembly Manufacturer
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

28 minutes ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
ROTARY CUTTER
Solicitation # SPE8E5-27-T-0539
Solicitation SPE8E5-27-T-0539 is a federal procurement for 92 boxes of rotary cutters, identified by NSN 3455-01-509-1779 and part number SR40 from Snap-on Tools (Australia) Pty Ltd. The contract is designated as a total small business set-aside under FAR 52.219-6 and NAICS code 333515. Delivery is required within 166 days after order, with an original required delivery date of March 9, 2027, and a need ship date of May 9, 2027. The items are to be delivered FOB origin to the DLA Distribution Depot Oklahoma at Tinker AFB, OK, with both inspection and acceptance occurring at the destination per FAR 52.246-1. The procurement mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 and ASTM D3951, though the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 requirements. Key regulatory clauses include DFARS 252.225-7001 regarding the Buy American and Balance of Payments Program and DFARS 252.204-7012 for safeguarding covered defense information. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Additionally, the solicitation prohibits the use of additive manufacturing for the supplies unless specifically authorized.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

28 minutes ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
CUTTER, MILLING, END
Solicitation # SPE8E5-27-T-0533
Solicitation SPE8E5-27-T-0533 is for the procurement of 195 end milling cutters by the DLA Troop Support Construction and Equipment office. The required tools must be heavy-duty C-5 grade carbide for roughing cuts, featuring a 5/8 inch cutting diameter, 1-1/2 inch cutting length, 5/8 inch shank diameter, and 4 flutes. Delivery is scheduled for March 1, 2027, with a need ship date of August 12, 2026, and is managed under the First Destination Transportation program with FOB Origin terms. The items are to be delivered to the DLA Distribution Depot at Tinker AFB, Oklahoma, where both inspection and acceptance will occur. The contract mandates strict adherence to DLA Master List technical and quality requirements, which take precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled according to MIL-STD-129 and palletized per RP001 requirements. Administrative compliance includes the use of the Wide Area WorkFlow system for invoicing and payment. Legal and regulatory requirements include DFARS 252.225-7001 for the Buy American program, DFARS 252.204-7012 for safeguarding covered defense information, and FAR 52.246-1 for destination inspection. All quotes must be submitted via the DIBBS portal.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

28 minutes ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
BAND, HEAT SHRINKABLE
Solicitation # SPE8E5-27-T-0497
Solicitation SPE8E5-27-T-0497 is a request for quotations issued by the DLA Troop Support Construction and Equipment office for the procurement of 177 heat shrinkable bands, identified by NSN 9390-01-389-8910. The contract specifies a delivery timeline with an original required delivery date of March 16, 2027, and a need ship date of May 9, 2027. Delivery is established as FOB Destination, with the shipping destination located at the DLA Distribution Depot Oklahoma at Tinker AFB. Inspection and acceptance will occur at the destination. The procurement is subject to strict technical and quality requirements, including compliance with MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Contractors are specifically instructed to avoid the use of plastics for wrapping and cushioning where possible. The contract includes significant regulatory mandates, such as the prohibition of mercury and hexavalent chromium, and requires adherence to the Buy American Act and the Berry Amendment. Additionally, the award is contingent upon the submission of Safety Data Sheets for hazardous materials and compliance with DFARS cybersecurity reporting and safeguarding of covered defense information. Invoicing must be processed electronically through the Wide Area WorkFlow system.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

28 minutes ago

DEADLINE

in 12 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-27-T-0329
This solicitation is for the procurement of 18 feet of round metal bars under NSN 9510-00-494-0592, specifically steel UNS K23080. The material must have a diameter of 1.250 inches and be supplied in whole feet lengths between 10 and 12 feet, with a reference weight of 4.170 lb/ft. The contract is a small business set-aside with a price evaluation preference for HUBZone concerns. Delivery is required FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB, with an original required delivery date of February 4, 2027. Strict quality and technical compliance are mandatory, including the provision of a Mill-Material Certification (Certificate of Quality Compliance) with every shipment. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award. Packaging and marking must adhere to MIL-STD-129, MIL-STD-2073-1E, and ASTM A700, with specific requirements for continuous identification markings on each unit of issue. Failure to comply with these marking and length requirements will result in the rejection of the product. The contract incorporates various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the safeguarding of covered defense information.
Iron and Steel Forging

POSTED

28 minutes ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-27-T-1977
Solicitation SPE7MC-27-T-1977 is a request for quotations for two safety relief valves, identified by NSN 4820016542036 and part number 6301522100-2 from Essex Industries Inc. The procurement is managed by the DLA Weapons Support Maritime Hardware/Electrical office, with a required delivery date of June 24, 2027, and a need ship date of May 4, 2027. Delivery is specified as FOB Origin, with the destination point for both inspection and acceptance being the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict adherence to technical and quality standards, including the use of MIL-STD-1916 or ASQ H1331 for sampling and the requirement for Item Unique Identification per MIL-STD-130. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with specific requirements for FAA commercial material and bare item marking. Additionally, the contractor must provide supply chain traceability documentation per DLAD Procurement Note C03 and is prohibited from using Class I ozone-depleting substances in the manufacturing process. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The solicitation incorporates several FAR and DFARS clauses, including the Buy American Act, cybersecurity reporting requirements, and prohibitions on covered defense telecommunications equipment. Award evaluation may be automated, and a price preference is available for HUBZone concerns.
Industrial Valve Manufacturing

POSTED

28 minutes ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC ROD
Solicitation # SPE8E5-27-T-0463
Solicitation SPE8E5-27-T-0463 is a small business set-aside for the procurement of 91 feet of nonmetallic rod, identified by NSN 9390-01-029-7782. The required material is natural color with a 2.250 inch diameter and lengths ranging from 4 to 10 feet. The items are designated as critical, requiring source inspection, and must be delivered to the DLA Distribution Depot Oklahoma at Tinker AFB. The delivery timeline is 166 days after order, with an original required delivery date of April 24, 2027, and a need ship date of May 9, 2027. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, as well as packaging and marking standards MIL-STD-2073-1E and MIL-STD-129. Palletization must follow RP001 requirements, and hazardous materials must be labeled per the Hazard Communication Standard. Invoicing and payment processing are required through the Wide Area WorkFlow (WAWF) system. Additionally, the contract incorporates various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

28 minutes ago

DEADLINE

in 12 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METAL
Solicitation # SPE8E4-27-T-0299
This solicitation, SPE8E4-27-T-0299, is a small business set-aside request for the procurement of three aluminum alloy metal sheets. Each sheet must be 0.050 inches thick, 48.00 inches wide, and 180.00 inches long, utilizing Alloy 7075 Temper T6. The procurement is governed by several technical standards, including MIL-STD-129R(3), SAE AMS-QQ-A-250/24C, ASTM B666/B666M-20, and ASTM B660-23. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and any deviation from these requirements must be explicitly indicated by the offeror. Key deliverables include a mandatory Certificate of Quality Compliance (Mill-Material Certification) provided with every shipment and forwarded to the DLA Troop Support Contracting Officer. Strict dimensional adherence is required, and test coupons are prohibited. Marking requirements are extensive; each unit must be identified with the DLA contract delivery order number, NSN, specification number, grade, alloy, manufacturer's name, and dimensions using waterproof stamping or stenciling. Packaging must comply with MIL-STD-2073-1E and the Level A requirements of ASTM B660. Delivery is set for 166 days after award, with the final destination being the DLA Distribution Depot Oklahoma at Tinker AFB.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

28 minutes ago

DEADLINE

in 12 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access
Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS