This Government Contract opportunity from Department Of Defense was posted on July 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

SEAL ASSEMBLY Manufacturing and Supply

Closed

Federal

Submission Closed07/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332996

New

Federal

47--COUPLING HALF,SELF-SEA

Solicitation # SPE7M326T9546

DLA Land And Maritime is soliciting quotes for the procurement of self-sealing coupling halves under NSN 4730010928095. The requirement is divided into three lines, totaling 795 units, all of which are to be delivered to DLA Distribution San Diego. Delivery timelines vary by line item, ranging from 30 to 363 days after the order is placed. This opportunity, identified by solicitation number SPE7M326T9546, is designated as a total set-aside for small businesses under NAICS code 332996. Interested and responsible sources must submit their quotes electronically by the deadline of October 13, 2026.

DLA Land And Maritime

POSTED

DEADLINE

47--STRAINER,SEDIMENT

Solicitation # SPE7M326T9553

DLA Land And Maritime is soliciting quotes for the procurement of two sediment strainers under NSN 4730014420624. The items are to be delivered to DLA Distribution Puget Sound within 160 days after the order is received. The approved source for this requirement is 1QZK3 0802DH-S1601212. This opportunity is issued as a Request for Quote under solicitation number SPE7M326T9553, with a response deadline of October 13, 2026. All quotes must be submitted electronically via the provided portal, as hard copies, specifications, and drawings are not available. All responsible sources are encouraged to submit their quotes for consideration.

DLA Land And Maritime

POSTED

DEADLINE

Clamp - 2" Pipe/Grounding #6

Solicitation # 12518

The City of Greensboro in North Carolina has issued solicitation number 12518 to secure a firm, delivered price for 2 inch Pipe/Grounding #6 Clamps. This procurement falls under NAICS code 332996 and is managed by primary point of contact Eugene Buckaloo. The solicitation was posted on September 28, 2026, with a response deadline of October 1, 2026. Suppliers are encouraged to submit their bids via the GePS website at least 24 hours before the closing date to avoid potential service interruptions. The basis for the award is the lowest responsible and responsive bid, with price serving as the primary evaluation factor. In accordance with the City of Greensboro Local Preference Policy, preference may be given to eligible local businesses within the Guilford County Economic Development Alliance area. For service contracts, eligible local bidders may receive an additional 5 percent of the evaluation points. This local preference policy is designed to support regional businesses and operates in conjunction with the City's Minority and Women Business Enterprise policy.

POSTED

DEADLINE

Pipe Nipple Fabrication and SupplyThis subcontract with the Department of Defense Fluid Handling Division involves the fabrication and supply of precision-manufactured pipe nipples, identified by NSN 001961974. The contractor is responsible for producing these components using industrial threading and cutting machinery in compliance with FSC 4730 standards, with performance taking place in Barstow, California. Quality assurance must be maintained through sampling conducted according to MIL-STD-1916 or ASQ H1331 Table 1, and the use of additive manufacturing is strictly prohibited unless approved by the ESA. The opportunity was posted on September 28, 2026, with a response deadline of October 9, 2026. Falling under NAICS code 332996, the contract requires the delivery of finished pipe nipples that meet all specified quantity and quality standards for prime contractors working on Fluid Handling Division projects.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Metal Tube Assemblies (NSN 4710-01-250-3984)This subcontract involves the supply of 75 metal tube assemblies, identified by NSN 4710-01-250-3984, for prime contractors supporting the Department of Defense Fluid Handling Division. The contractor is responsible for manufacturing or sourcing the assemblies in accordance with the DLA Master List of Technical and Quality Requirements. All deliverables must adhere to strict marking and labeling standards, specifically MIL-STD-129 for shipment and storage and 29 CFR 1910.1200 for hazardous materials. The project is categorized under NAICS code 332996 and will be performed in New Cumberland, Pennsylvania. Responses for this opportunity are due by October 9, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Sediment Strainer Element (NSN 4730014326574)This subcontract involves the procurement of one sediment strainer element, identified by NSN 4730014326574, to support prime contractors under the Maritime Supply Chain ESOC Buys contracts for the Department of Defense. The supplier is required to deliver the physical part in accordance with RP001 DLA Packaging Requirements for Procurement and the DLA Master List of Technical and Quality Requirements. The performance for this contract will take place in San Diego, California. Interested parties must submit their responses by the deadline of October 9, 2026, under NAICS code 332996.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of Pipe Tees (NSN 4730-01-364-8705)This subcontract, issued by the Department of Defense Fluid Handling Division, requires the supply of 48 pipe tees meeting NSN 4730-01-364-8705 specifications. The selected provider must manufacture or source the parts and ensure all items are marked according to MIL-STD-129 and packaged and palletized in compliance with RP001 DLA Packaging Requirements. CAGE code verification is mandatory for all approved sources to ensure regulatory compliance. The contract is designated as a Total Small Business Set-Aside under NAICS code 332996. All 48 units must be delivered within 120 days following the placement of the order. Interested parties had until October 5, 2026, to respond to the solicitation.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Fluid Flow Restrictors (NSN 4730014126769)This subcontract with the Department of Defense Fluid Handling Division involves the manufacture or sourcing of four finished fluid flow restrictors under NSN 4730014126769. The supplier must ensure all components adhere to RA001 technical and quality requirements and follow RP001 packaging standards. Performance of the contract will take place in Albany. Compliance with RQ032 export controls is mandatory, including adherence to ITAR or EAR regulations. The solicitation was posted on September 28, 2026, with a response deadline of October 9, 2026. The project falls under NAICS code 332996.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M3-26-T-9140

Solicitation SPE7M3-26-T-9140, issued by the DLA Land and Maritime Fluid Handling Division, is a request for quotations for 45 units of Tube Tees, part number MS21912J4. These critical application items must be manufactured from CRES Type 304 material with a 0.250 inch nominal tube outer diameter. The parts must comply with specification AS21912, as well as SAE AS1828H Revision H and SAE AS21912E Revision E. Engineering source approval by the design control activity is required to maintain quality, and the use of Class I ozone depleting chemicals is strictly prohibited. The contract specifies delivery FOB Origin to the DLA Distribution Depot at Hill AFB, Utah, with an original required delivery date of May 5, 2027, and a need ship date of November 13, 2027. Inspection and acceptance will occur at the destination per FAR 52.246-2. Packaging must adhere to MIL-STD-2073-1E and MIL-B-117, with marking following MIL-STD-129. Payment and receiving reports must be processed electronically via the Wide Area WorkFlow system. Offerors are cautioned that items produced using additive manufacturing will not be evaluated unless specifically authorized.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M3-26-T-9171

Solicitation SPE7M3-26-T-9171, issued by the DLA Land and Maritime Fluid Handling Division, is a request for quotations for 30 units of pipe caps under NSN 4730-01-258-7241. The required delivery date is May 22, 2027, with a delivery period of 235 days. Shipping is FOB Origin, while inspection and acceptance will occur at the destination, specifically the DLA Distribution DSP New Cumberland Facility in Pennsylvania. The procurement is conducted under NAICS 332996 and may be eligible for automated award. Technical compliance requires adherence to the DLA Master List of Technical and Quality Requirements, including specific provisions for configuration change management and the removal of government identification from non-accepted supplies. Quality assurance involves zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Packaging must follow ASTM D3951 and MIL-STD-129, with a strict prohibition on Class I ozone-depleting chemicals. Offerors must comply with the Buy American Act and Berry Amendment, and those utilizing additive manufacturing are ineligible for award without prior approval. Price evaluation preferences are available for SBA-certified HUBZone small businesses.

FLUID HANDLING DIVISION

POSTED

DEADLINE

ADAPTER, STRAIGHT, PIPE

Solicitation # SPE7M2-26-T-6909

Solicitation SPE7M2-26-T-6909, issued by the DLA Land and Maritime Nuclear Reactor Program, is a request for quotations for six straight pipe to boss adapters, identified by NSN 4730-01-416-6912. This critical application item is associated with part number EB3461/3-32,TY1 and is linked to manufacturers including Hydrasearch Company, LLC, Electric Boat Corporation, and Custom Hydraulic & Machine, Inc. The required delivery date is June 1, 2027, with a need ship date of March 16, 2027, delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements RP001 and marking standard MIL-STD-129, with destination inspection and acceptance governed by FAR 52.246-2. Technical and quality requirements are incorporated via the DLA Master List under reference RA001. Notably, the solicitation prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions. Compliance is required for the Buy American and Balance of Payments Program, the Berry Amendment, and cybersecurity standards under DFARS 252.204-7012. Offers produced using additive manufacturing are ineligible for award, and a price evaluation preference is available for HUBZone concerns. Invoicing must be processed electronically through the Wide Area WorkFlow system.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

CAP, QUICK DISCONNECT

Solicitation # SPE7M3-26-T-9215

Solicitation SPE7M3-26-T-9215 is a fixed-price request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 119 quick disconnect caps, identified by NSN 4730-00-441-2885 and Eaton Aeroquip LLC part number AE96863F-06. This item is classified as a commercial critical application item. The procurement is a simplified acquisition that may be eligible for automated award, with a HUBZone price evaluation preference. Delivery is required within 168 days after order, with a need ship date of March 16, 2027, and an original required delivery date of June 20, 2027. Shipping is FOB Origin, with the final destination for inspection and acceptance being DLA Distribution Warner Robins at Robins AFB, Georgia. The contractor must adhere to strict packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, though the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must comply with RP001 requirements. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. The solicitation also mandates compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information and cyber incident reporting. Offerors are prohibited from providing items produced via additive manufacturing unless specifically authorized.

FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 1 day

AI Contract Overview

The contract requires the manufacture, quality assurance, packaging, and delivery of two mechanical seal assemblies identified by NSN 1440-00-560-8390, all of which must fully comply with Department of Defense technical and quality standards as specified by the Defense Logistics Agency. The work involves precision fabrication and rigorous testing to ensure operational reliability under demanding conditions, with all components and processes adhering to established military specifications throughout production and final inspection. The contract is classified as a subcontract under NAICS code 332996, and the performance is subject to the oversight of the ASC Commodities Division within the Department of Defense. Proposals must be submitted by July 20, 2026, with the solicitation posted on July 15, 2026, providing a five-day window for response. While no specific place of performance or set-aside classification is identified, recipients must meet all DLA requirements for documentation, traceability, and delivery timelines. The contract is accessible via the DIBBS platform, and failure to meet quality or compliance benchmarks will result in rejection or contract termination. Deliverables are strictly limited to two units, and all packaging must ensure safe transport and long-term storage without degradation of performance characteristics.

General Info

Manufacture and deliver two DLA-compliant mechanical seal assemblies meeting strict military specs by July 20, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

332996 - Fabricated Pipe and Pipe Fitting Manufacturing

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-04GQ.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SEAL ASSEMBLY

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJul 15

subcontract

Response DeadlineJul 20

Deadline has passed

Submission Closed

07/20/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture, quality assurance, packaging, and delivery of two units of a mechanical seal assembly (NSN: 1440-00-560-8390) compliant with DLA technical and quality standards.