Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

SEAL, GAS TURBINE

Active
SPE7L4-26-U-0988Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for 519 gas turbine seals, identified by NSN 5330-00-615-0656, under solicitation SPE7L4-26-U-0988, with a total small business set-aside and a NAICS code of 339991. Delivery is required within 91 days of award, and responses must be submitted by August 6, 2026. All items must comply with technical and quality requirements referenced in the DLA Master List, which governs specifications based on the solicitation or award date depending on acquisition size. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals not explicitly authorized must be submitted for approval. Mercury and mercury-containing compounds are banned from intentional addition or direct contact with hardware, except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and certain chemical reagents outlined by NAVSEA, with portable devices required to be shock-proof and have a secondary containment. The product must be free of asbestos, and any alternative materials must meet the approval criteria under Clause L30. Government identification must be removed from non-accepted supplies, and packaging must adhere to DLA standards. Covered defense information may apply. The contract is managed by the Department of Defense through the LSO Combat Vehicles and Armament office, with Heather Kessler listed as the primary point of contact.

General Info

519 gas turbine seals under small business set-aside, delivery in 91 days, no ozone-depleting or mercury compounds, DLA standards apply.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(1)

SPE7L4-26-U-0988.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
View Agency Profile
Office AddressUS

Full Description

Show more
SEAL,GAS TURBINE
SEAL, GAS TURBINE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
"ITEMS SUPPLIED MUST BE FREE OF ASBESTOS.
LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS
ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE
ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE
WITH CLAUSE L30 AND PROVISION 4 CONDITIONS
FOR NSN/Part Number: 5330-00-615-0656 Quantity: 519 EA Purchase Request: 1000237543QTY: 519 Delivery: 91 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
GASKET AND SEAL SETThe contract pertains to the procurement of a GASKET AND SEAL SET with NSN 5330-01-308-3522, designated as a Navy Critical Safety Item, requiring strict adherence to technical, quality, and security protocols. Compliance is governed by referenced DLA Master List requirements identified by R and I numbers, with applicable revisions tied to either the solicitation or award date depending on acquisition size. The supplier must meet stringent documentation mandates including a Source Approval Request, Cybersecurity Maturity Model Certification Level 2 Self-Assessment, and adherence to DLA packaging standards. Inspection and acceptance occur at origin, with non-accepted items requiring removal of government identification, and all items must be physically marked per RQ017, including contractor and manufacturer CAGE codes, part number, and lot or serial number, though Item Unique Identification is not required. Sampling follows MIL-STD-1916 or ASQ H1331 with zero defects permitted unless otherwise specified, and measuring equipment must comply with RT001 standards. All technical data is controlled under ITAR or EAR, prohibiting export without authorization and restricting access to contractors with approved JCP certification, completed DOD export training, and DLA approval. DFARS 252.225-7048 applies to all technical data handling. Packaging and marking must conform to MIL-STD-129, and any waivers or deviations require formal approval from the DSC Contracting Officer. Delivery is due within 333 days after contract award.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
GASKETThe contract specifies the procurement of a gasket identified by NSN 5330-00-679-7064, with a fixed quantity of 270 units under a firm fixed price term. The item is source-controlled, meaning only approved vendors—specifically Eagle-Picher Industries Inc and Federal-Mogul Corp Fel-Pro Gasket—are authorized to supply it; all other offerors must obtain prior source approval from the original equipment manufacturer and submit supporting technical documentation with their proposal. The gasket must comply with strict material restrictions, including a complete prohibition of asbestos as defined in FED-STD-313, and must be manufactured and tested using limited rights data accessible only to qualified suppliers. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with all items enclosed in a medium-duty, waterproof, greaseproof, opaque bag meeting MIL-DTL-117, Type II, Class C, Style 1, particularly for direct vendor delivery, foreign military sales, and stock shipments. Delivery is required within 125 days after award, with FOB origin and inspection and acceptance occurring at the destination. The item is subject to defense information controls, and transportation and shipping details direct delivery to DLA Distribution Anniston in Anniston, Alabama. The solicitation closed for responses on July 29, 2026, with an anticipated ship date of December 3, 2026, under a Department of Defense procurement initiative.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
GASKETThe contract pertains to the procurement of a gasket identified by NSN 5330-01-477-9623 and part number 4119NX0108E05, with a requirement for one unit delivered within 20 days of order placement. Delivery is FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The item is subject to strict packaging standards per MIL-STD-2073-1E and MIL-STD-129 for marking, including a special shelf-life marking code 32 indicating a Type I, non-extendable 12-month shelf life. Packaging must be in a medium-duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, and palletization must adhere to DLA’s packaging requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized. The item contains no asbestos as defined by FED-STD-313 and must be marked in compliance with MIL-STD-130N. Shipment must be sent via the fastest traceable method, excluding parcel post, to the designated FMS delivery point at Edgewood Armory in Maryland. The contract references technical and quality requirements from the DLA Master List and applies to direct vendor delivery and foreign military sales. The solicitation number is SPE7L1-26-T-862H, with a response deadline of August 3, 2026, and the original required delivery date is July 20, 2026.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
RUBBER SHEET, SOLIDThe contract specifies the procurement of a solid rubber sheet measuring 36 inches square and 0.063 inch thick, with a Shore Durometer range of 45.0 minimum to 55.0 maximum, smooth on both sides, and manufactured from synthetic rubber. The item is classified as a Type I shelf-life item with a 12-month lifespan, requiring at least 85% of that shelf life to remain at time of delivery, and all cure and expiration dates must be clearly marked per MIL-STD-129 in calendar quarter and year format. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R or I numbers, and sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances allowed unless otherwise stated in the contract. Attributes are classified with verification levels or AQLs, and unspecified attributes are deemed major. Mercury and mercury-containing compounds are prohibited unless exceptions apply for specific functional uses outlined in NAVSEA 5100-003D, and any portable devices containing mercury must have shockproof construction with a secondary containment barrier. The rubber sheet must be free of asbestos as defined in FED-STD-313. Markings are required every three feet with the specification number, revision letter, type, and class, along with the quarter and year of cure or manufacture, following MIL-STD-190 for performance, legibility, color, and environmental resistance. The contractor must certify understanding of bare item markings prior to award. The item, identified by NSN 9320-00-641-3051, is procured competitively under a military specification with a single unit quantity, a 20-day delivery window from award, and is managed by the Department of Defense under contract SPE8E9-26-T-3238.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SEALThis contract under the SEAL designation pertains to the procurement of 61 units of part number 00172 with NSN 5330-01-205-9632, sourced from STANLEY WORKS located in MILWAUKIE under FSCM 54252. The item must comply with stringent material restrictions, including a total prohibition on asbestos as defined in FED-STD-313 and the intentional addition of mercury or mercury-containing compounds, except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents authorized by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and include a secondary containment boundary to prevent leakage, in accordance with NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The contract was solicited under number SPE7L3-26-T-124Y, with a response deadline of August 3, 2026, and a delivery requirement within 187 days of award. The place of performance is specified as New Cumberland, PA 17070-5002, and the primary point of contact is Susan Diamond, reachable via email and phone provided. The procurement is classified under NAICS code 339991 and falls under the Department of Defense’s Land Supplier Ops Vehicle Support organization.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

NAICS: 336360
New
DIBBS
PUMP, WINDOW WASHERThe contract is for the procurement of one window washer pump with NSN 2540-99-930-8125 and part number 714/20600 from J.C. Bamford Excavators Limited, under solicitation SPE7L4-26-T-5733. The requirement is for delivery within ten days FOB origin with zero variance in quantity, and the item must be shipped by the fastest traceable means, explicitly excluding parcel post. All packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, containerization, and palletization as defined by DLA packaging standards, and marking must adhere to MIL-STD-129 with no special markings required. Inspection and acceptance occur at the destination point, and the delivery will be made to Fort Eustis, Virginia. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling to follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified. Attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes are treated as major. The unit of issue is each (EA), and the contract references the DoD authorized unit of issue system. The Government's point of contact is Anna-Rachelle Betts, and the item is destined for use under Project TP 2 with a required delivery date of July 17, 2026. The contract includes additional government-specific identifiers for tracking, including a transportation control number and distribution codes, and is issued under the NAICS code 336360 for the Department of Defense.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 336390
New
DIBBS
MIRROR ASSEMBLY, REAThe contract pertains to the procurement of a MIRROR ASSEMBLY, REA with NSN 2540015578319 and part number 613561, under solicitation SPE7L4-26-U-0985. The requirement is for 61 units at a unit price of $61.00, totaling $3,721.00, with delivery required within 14 days FOB origin. The contract specifies strict adherence to DLA packaging requirements, including compliance with MIL-STD-129 for marking and labeling, and packaging must conform to either ASTM D3951 for non-hazardous materials or TQ requirement IP025 if classified as hazardous per FED-STD-313. All packaging and palletization must align with RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT, and the DLA Master List of Technical and Quality Requirements supersedes any conflicting industry standards. Inspection and acceptance occur at the destination point, with zero variance allowed in quantity. This is a total small business set-aside under NAICS code 336390, managed by the Department of Defense’s LSO Combat Vehicles and Armament office. The solicitation was posted on July 21, 2026, with responses due by August 5, 2026. The unit of issue is each (EA), and the contract explicitly states that the quantity listed is an estimate and may not be fully purchased by the IDC. Primary point of contact is Heather Kessler, with provided phone and email for inquiries. The contract is accessible via the DIBBS system, and all technical and quality specifications referenced are drawn from the DLA Master List, with revisions governed by the solicitation issue date or any subsequent amendment.
Other Motor Vehicle Parts Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 336390
New
DIBBS
MAPBOARD ASSEMBLYThe MAPBOARD ASSEMBLY contract under solicitation SPE7L4-26-T-5272 specifies the procurement of eight units of a critical application item defined by multiple Army drawings, with final finish requirements governed by DCSC drawing 16236 CS-2300-0001 to ensure compliance with Chemical Agent Resistant Coating (CARC) and high-temperature coating standards. All materials must adhere to stringent technical and quality mandates incorporated from the DLA Master List of Technical and Quality Requirements, and the use of Class I ozone-depleting chemicals is strictly prohibited. The item must be manufactured and assembled in full compliance with TDP Rev A Gen 1 specifications tied to reference drawings with identified revisions, and packaging must follow MIL-STD-2073-1E and SPI AK13713202 Revision A, including marking per MIL-STD-129 and palletization per DLA requirements. The contract enforces inspection and acceptance at origin, with no quantity variance allowed, and delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of November 4, 2025. Compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is mandatory, and all suppliers must ensure no government identification remains on non-accepted supplies. The contract is subject to full and open competition under a NAICS code of 336390, with delivery due within 113 days of award and a total contract value of $8.00 per unit.
Other Motor Vehicle Parts Manufacturing

POSTED

1 day ago

DEADLINE

in 2 days
View Details