Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SEAL, NONMETALLIC SP

Active
SPE7L3-26-T-148EFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a nonmetallic seal, part number 149T7259Y9, with NSN 5330016879369, for delivery to Joint Base Elmendorf-Richardson in Alaska. Two units are required under solicitation SPE7L3-26-T-148E, with a delivery window of 20 days FOB origin and no variance allowed in quantity. The seal is designated as a critical application item for the Federal Aviation Administration, requiring airworthiness approval and strict compliance with FAA bare item marking requirements. All packaging, preservation, and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-117 Type II Class C Style 1, which mandates medium-duty, waterproof, greaseproof, opaque packaging to protect against UV degradation. Supply chain traceability documentation must be retained by the contractor in accordance with DLA Directive Procurement Note C03, and all government identification must be removed from non-accepted supplies. The item is subject to configuration change management through engineering change proposals and variance requests, and any covered defense information must be handled appropriately per RD003 requirements. Transportation and shipping instructions follow DLA Procurement Notes C19 and C20, with delivery directed to the specified warehouse at Joint Base Elmendorf-Richardson. The required delivery date is July 30, 2026, and the contract is administered by the Department of Defense’s Land Supplier Operations Vehicle Support office.

General Info

Procure two nonmetallic seals, part 149T7259Y9, for FAA critical use, deliver to Joint Base Elmendorf-Richardson by July 30, 2026, per strict military packaging and traceability standards.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

JOINT BASE ELMENDORF RICHARDSON, JBER, AK, 99505-4600, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L3-26-T-148E for DLA Land and Maritime Vehicle Support

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUS
Contacts
Susan Diamond
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SEAL,NONMETALLIC SP
SEAL,NONMETALLIC SP
RQ046: FAA Bare Item Marking Requirements RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RP003: PRESERVATION, PACKAGING, PACKING AND MARKING REQUIREMENTS FOR
FEDERAL AVIATION ADMINISTRATION COMMERICAL MATERIAL
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ019: Federal Aviation Administration (FAA) Airworthiness Approval
CRITICAL APPLICATION ITEM
THE BOEING COMPANY 81205 P/N 149T7259Y9
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 CDRL-FAACERTCOM-25015 REVISION NR DTD 01/14/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE7L3-26-T-148E
SECTION B
PR: 7017722251 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017722251 0001 EA 2.000
NSN/MATERIAL:5330016879369
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
BULK BREAK POINT:
W80CWG
W6XS USALRCTR JB ELMENDO
804 WAREHOUSE ST AWCF SSF
JOINT BASE ELMENDORF RICHARDSON
JBER AK 99505-4600
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W80CWG
W6XS USALRCTR JB ELMENDO
SPE7L3-26-T-148E
SECTION B
PR: 7017722251 PRLI: 0001 CONT’D
804 WAREHOUSE ST AWCF SSF
JOINT BASE ELMENDORF RICHARDSON
JBER AK 99505-4600
US
MARKFOR
W80CWG
W6XS USALRCTR JB ELMENDO
804 WAREHOUSE ST AWCF SSF
JOINT BASE ELMENDORF RICHARDSON
JBER AK 99505-4600
US
M/F: (TCN) W80CWG62050016
RDD: 220
PROJ: TP 3
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A01 DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/30/2026
SPE7L3-26-T-148E NSN/Part Number: 5330-01-687-9369 Quantity: 2 EA Purchase Request: 7017722251QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L4-26-U-1055
The contract pertains to the procurement of 31 gaskets identified by NSN 5330-01-701-0239 under solicitation SPE7L4-26-U-1055, with a total small business set-aside classification and a NAICS code of 339991. The item is classified as a commercial item and must be supplied free of asbestos, with any alternative materials requiring prior approval under Clause L30 and Provision 4 conditions. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, specifying a medium duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. The gasket must be marked in accordance with MIL-STD-130N for U.S. military property identification and adhere to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision controlled by the solicitation issue date. The contract requires delivery within 97 days of award and is managed by the Department of Defense’s LSO Combat Vehicles and Armament office, with Heather Kessler as the primary point of contact.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-916W
The contract is for the procurement of a gasket item identified by NSN 5330-01-557-0920 and part number X-113BT, with a requirement of 600 feet delivered in continuous lengths. The unit of issue is the foot, with the order unit being a roll of 500 feet, and delivery must occur within five days of award. Delivery is FOB origin, and the quantity allowable variance is plus 10 percent with zero tolerance for reduction. Inspection and acceptance are both conducted at the destination. Packaging must comply with MIL-STD-2073-1E, using black plastic for preservation, with no cushioning or dunnage, and markings must follow MIL-STD-129 with no special handling codes. The item is not classified as hazardous, but shipment must be sent by the fastest traceable method, explicitly prohibiting parcel post. The destination for delivery is the Distribution Management Office at MCLB Albany, Georgia. The gasket is sourced from approved vendors including Trim-Lok Inc, Charleston Rubber & Gasket Co Inc, and General Dynamics Land Systems. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract. The contract is issued under solicitation SPE7L1-26-T-916W, with a response deadline of August 17, 2026, and an original required delivery date of August 6, 2026. The NAICS code is 339991, and the contracting activity falls under the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7LX-26-U-9284
The contract is for 2,029 plain seals with the NSN 5330-01-504-8614 under solicitation SPE7LX-26-U-9284, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The solicitation is a total small business set-aside, meaning only qualifying small businesses may respond, and it is governed by the NAICS code 339991. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for this simplified acquisition. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. Source approval documentation must be submitted in accordance with the specified documentation requirements. Delivery is required within 54 days after award, and all responses must be submitted by August 20, 2026. The primary point of contact is Theodore Misiolek, reachable via phone or email, and additional details are available through the DIBBS portal.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
SEAL, OIL, HORIZONTAL
Solicitation # SPE7LX-26-U-9310
The contract is for 538 units of a horizontal oil seal with NSN 5330-01-662-9969, solicited under number SPE7LX-26-U-9310 with a response deadline of August 20, 2026, and a required delivery within 98 days of award. This is a total small business set-aside under FAR 19.5, targeting NAICS code 339991 for other miscellaneous manufacturing, and is issued by the Department of Defense’s Strategic Procurement Program Directorate. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. Packaging must comply with DLA procurement standards, and non-accepted supplies must have all government identification removed prior to return. All data provided is proprietary or insufficient for competitive bidding, indicating the requirement is based on proprietary specifications. The primary point of contact is Theodore Misiolek, reachable via email and phone provided.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE4A6-26-T-12TW
This contract solicits 262 O-RINGS with NSN 5331-00-004-5061 under solicitation number SPE4A6-26-T-12TW, with a response deadline of August 13, 2026, and a delivery requirement of 161 days after award. The item must comply with all technical and quality requirements referenced by R and I numbers from the DLA Master List of Technical and Quality Requirements, with the version in effect on the solicitation issue date controlling for simplified acquisitions. Packaging must adhere to DLA standards, and all supplies must be stripped of government identification if not accepted. Contractors are required to retain supply chain traceability documentation per DLA Directive Procurement Note C03 from August 2016. Documentation for source approval requests is mandatory, and the product must be free of asbestos, with any alternative materials requiring prior approval under Clause L30 and Provision 4 conditions. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be submitted for approval unless explicitly authorized by specification requirements. Covered defense information may apply, and the contract is administered by the ASC Commodities Division under the Department of Defense, with performance to occur in Tracy, California, and primary point of contact being Stuart Dowdy at stuart.dowdy@dla.mil.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7LX-26-U-9309
The contract is for the procurement of 1,746 O-rings identified by NSN 5331-01-269-4323 under solicitation SPE7LX-26-U-9309, with a required delivery within 84 days after award. The solicitation is issued under a Total Small Business Set-Aside, meaning only qualified small businesses may respond, and it falls under NAICS code 339991 for other miscellaneous manufacturing. The item must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The product is strictly prohibited from containing any asbestos as defined in Fed-Std-313, and all non-accepted supplies must have government identification removed prior to return. The contracting activity is managed by the Strategic Acquisition Program Directorate under the Department of Defense, with Theodore Misiolek listed as the primary point of contact. The solicitation was posted on August 5, 2026, with responses due by August 20, 2026, and submissions must be made through the DIBBS platform.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
COVER, EXHAUST LINE
Solicitation # SPE8EF-26-Q-0167
The contract pertains to the procurement of four units of a cover for an exhaust line, identified by NSN 1730-00-691-5565, under solicitation SPE8EF-26-Q-0167. The requirement is priced on a firm fixed price basis with no tolerance for quantity variance, meaning exactly four units must be delivered. The item must be delivered within 60 days after the award date, with both inspection and acceptance occurring at the origin. Delivery is FOB destination, and the shipping address is located at Al Udeid Air Base in Qatar, with a final parcel post address in APO AE 09309-9998. Packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, wrapping materials, and unit container type D3, while marking must adhere to MIL-STD-129 with no special markings required. Palletization must also follow DLA’s procurement guidelines. The contract incorporates cybersecurity requirements via CMMC Level 2 Self-Assessment and defines covered defense information, with quality and technical standards sourced from the DLA Master List. The purchaser is a federal agency under the Department of Defense, with Sharon Forde listed as the primary point of contact. The material need date is May 16, 2023, and the contract includes internal government codes for tracking and logistics coordination.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7LX-26-U-9325
The contract concerns the procurement of 5,156 O-rings with NSN 5331-01-537-0498 under solicitation SPE7LX-26-U-9325, issued by the Department of Defense’s Strategic Acq Program Directorate. Delivery is required within 128 days of award, and the purchase request number is 1000239164. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The solicitation was posted on August 5, 2026, with responses due by August 20, 2026, and is classified under NAICS code 339991 for other miscellaneous manufacturing. The primary point of contact is Theodore Misiolek, reachable at the provided phone and email. Government identification must be removed from non-accepted supplies, and performance is subject to federal procurement regulations without a specified set-aside. The full solicitation details are accessible via the DIBBS system.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
FELT, MECHANICAL, PRE
Solicitation # SPE7L1-26-T-917K
This contract pertains to the procurement of FELT, MECHANICAL, PREFORMED items identified by the NSN 5330-00-496-0967 and specific part numbers from qualified suppliers including LINEAR MOTION LLC, ONTIC ENGINEERING & MANUFACTURING, INC, and MISTEQUAY GROUP LTD. The item is classified as a commercial item and must comply with strict packaging requirements mandated by MIL-DTL-117, TYPE II, CLASS C, STYLE 1, ensuring protection in a medium duty, waterproof, greaseproof, and opaque bag to prevent UV degradation, applicable to all delivery types including direct vendor delivery, foreign military sales, and stock shipments. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must follow DLA’s packaging guidelines. The contract specifies a delivery of 57 units at a unit price of $57.00, totaling $3,249.00, with FOB origin terms, zero quantity variance allowed, and inspection and acceptance occurring at destination. The required delivery date is 55 days from award, with a need ship date of November 4, 2025, and an original required delivery date of October 21, 2025. All materials must be free of asbestos as defined by FED-STD-313, and transportation logistics are governed by DLA procedural notes C19 and C20. The contract reference is SPE7L1-26-T-917K, solicited under a federal acquisition framework, with the point of contact being Kallie Regula of the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7M1-26-Q-1336
This contract specifies the procurement of 2,000 O-rings made from synthetic rubber, identified by the National Stock Number 5331-00-248-3849 and part number MS29513-019, with detailed technical requirements aligned to SAE AS29513 Revision C dated October 1, 2016. The item is classified as a commercial item and must be manufactured by a supplier approved on the Qualified Products List (QPL); only QPL-approved manufacturers are eligible at the time of award. The product has a non-extendable shelf life of 180 months and is designated as a Type I (Code Y) item, with packaging and preservation strictly governed by MIL-STD-2073-1E and MIL-STD-129. Mercury and mercury-containing compounds are prohibited from direct contact with the item or its packaging, with exceptions only for functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, and any such components must meet additional containment standards. Packaging must be in a medium-duty, waterproof, greaseproof, and opaque bag per MIL-DTL-117, Type II, Class C, Style 1, especially for direct vendor delivery, foreign military sales, or stock shipments. Preservation methods require dry, clean packaging with no mercury-based compounds, and markings must comply with MIL-STD-129, including the special marking code for Type I shelf life. The delivery is FOB origin with a firm fixed price and zero variance allowed in quantity, to be delivered within 126 days after contract award, with inspection and acceptance occurring at the destination. The contract is subject to all technical and quality requirements referenced in the DLA Master List, and the sole point of performance and delivery is Tinker AFB, Oklahoma.
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SHIELDING GASKET, ELECTRONIC
Solicitation # SPE7MX-26-R-X039
The contract centers on the procurement of a shielding gasket, electronic, identified by NSN 5999-01-506-4338 and part number AVIATION DEVICES AND ELECTRONIC P/N AG736000-01, under solicitation SPE7MX-26-R-X039 issued by the Land Supplier Operations SMSG under the Department of Defense. It is an indefinite-delivery contract with a guaranteed minimum value of $2,004 and a maximum obligated amount of $1,491,112, allowing orders to be placed over a three-year period from the award date. The contract uses a firm-fixed price structure with pricing structured in four quantity ranges, from 161 to 3,852 units, based on estimated annual demand of 2,569 units. Deliveries are FOB origin, with final inspection and acceptance occurring at the destination, and all items must comply strictly with MIL-STD-2073-1E for packaging and preservation, including a dry clean preservation method, U packaging code, and BE unit container. Marking and labeling must adhere to MIL-STD-129 with Data Matrix or Code 128 barcoding, and bare part identification is governed by MIL-STD-130 via RQ017, requiring NSN, part number, and traceable lot or serial codes. Special labeling is required for test samples: “Product Verification Test Samples – Do Not Post to Stock,” along with contract and lot numbers. The contractor must supply full traceability documentation per DFARS 252.217-7026 and comply with Buy American and specialty metals requirements under 10 U.S.C. 4753, as well as DFARS restrictions on hexavalent chromium and foreign sourcing. Cybersecurity compliance with NIST SP 800-171 is mandatory for handling controlled unclassified information. All invoicing must be submitted via EDI, and the contractor must hold a valid UEI and CAGE code, with socioeconomic status certifications required for small business and other designated categories. Evaluation will be based on a balanced trade-off approach where price is paramount but not sole; past performance, proposed delivery, and surge and sustainment capabilities will be assessed, with award made to the offeror providing best value. The contracting officer retains full authority to inspect and accept goods, subject to material certification
LAND SUPPLIER OPERATIONS SMSG

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 339991
New
DIBBS
RETAINER, PACKING
Solicitation # SPE7L1-26-T-916M
The contract solicitation is for the procurement of two retainers, packing, identified by NSN 5330-00-568-5838, under purchase request 7017756175, with a required delivery within 20 days after award. This solicitation, numbered SPE7L1-26-T-916M, was posted on August 5, 2026, and responses are due by August 17, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements accessible via the DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA packaging standards, and non-accepted supplies must have all government identification removed prior to return. The solicitation is classified under NAICS code 339991, issued by the Department of Defense’s Land Supply Chain, and is open to federal contractors. Primary point of contact is Kristina Derry, reachable via email and phone provided in the contract data.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 332999
New
DIBBS
BRACKET, VEHICULAR C
Solicitation # SPE7L3-26-T-148B
The contract specifies the procurement of one unit of a vehicular bracket identified by NSN 2510-01-706-9776 and part number 5270099-329 under solicitation SPE7L3-26-T-148B, with a required delivery within five days of order placement. Delivery is FOB origin with zero variance allowed in quantity, and inspection and acceptance occur at the destination. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other specifications, including ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization following specified guidelines. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. The item must be shipped via traceable freight to the designated military facility in San Diego, California, with parcel post explicitly forbidden. The unit of issue is each, priced at one dollar, with no total price adjustment permitted. The contract enforces strict labeling and packaging standards, and all technical and quality specifications incorporated by reference must be met without exception, overriding any conflicting requirement unless explicitly amended. The point of contact for inquiries is Lee Miller at DLA, with responses due by August 17, 2026, and the required delivery date set for August 3, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333612
New
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE7L3-26-T-148A
The contract pertains to the procurement of a shaft, shoulders, identified by NSN 3040-00-549-3495 and part number 41001707, with a single unit quantity to be delivered under solicitation SPE7L3-26-T-148A. Delivery must occur within 20 days of award, with FOB origin terms, and no variance allowed in quantity. Inspection and acceptance occur at the origin, and packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including specific methods for preservation, wrapping, and unit containerization as defined by code Q and packaging level B. Marking must adhere to MIL-STD-129 with no special marking required. The item is to be shipped to the Taiwan Army Zuo-Ying Ammunition Sub in Kaohsiung City, with freight forwarding details governed by DLA procedural notes. The material is explicitly prohibited from containing Class I ozone-depleting chemicals, and any substitute chemicals must receive prior approval unless already authorized by specification. The item has no shelf life requirement. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the acquisition type and date. The contract specifies a unit price of $1.00 for a total price of $1.00, with a required delivery date of August 7, 2026. The procurement is issued by the Department of Defense under the NAICS code 333612, with Lee Miller as the primary point of contact.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332119
New
DIBBS
DIAL, CONTROL
Solicitation # SPE7L3-26-T-148J
This contract, issued under solicitation SPE7L3-26-T-148J by the Department of Defense’s Land Supplier Operations Vehicle Support, requires the delivery of one unit of a DIAL, CONTROL with NSN 5355-01-686-6662, to be furnished in accordance with strict technical and packaging standards. The item must be delivered within ten days to Camp Lejeune, North Carolina, FOB origin, with no variance permitted in quantity, and subjected to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, container codes, and palletization governed by DLA’s procurement packaging requirements. All materials must adhere to environmental prohibitions, including the complete exclusion of Class I ozone-depleting chemicals and intentional use of mercury or mercury compounds, except for specified functional exceptions such as batteries, fluorescent lights, and certain instruments as approved by NAVSEA, which must also include secondary containment and shockproofing. The contract incorporates referenced technical and quality requirements from the DLA Master List, with revisions controlled based on acquisition type and solicitation amendments. Special shipping instructions prohibit parcel post and mandate traceable freight delivery via a designated military freight address, with marking and documentation strictly aligned to government protocols. The contract includes detailed logistics data, including a unique government tracking identifier, project code, and official point of contact for procurement inquiries.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
BRACKET, VEHICULAR C
Solicitation # SPE7L3-26-T-147Z
The contract pertains to the procurement of one unit of a vehicular bracket designated by NSN 2510-01-707-0377 and part number 5270900-329 from POLARIS SALES INC, issued under solicitation SPE7L3-26-T-147Z. Delivery is required within five days of award, with goods to be shipped FOB origin and inspected and accepted at the destination. No quantity variance is permitted, and strict compliance with DLA’s Master List of Technical and Quality Requirements is mandatory, superseding any conflicting specification standards. The item must not contain any Class I ozone-depleting chemicals, and substitutes require prior approval unless explicitly authorized. Packaging must conform to ASTM D3951, with markings and labels adhering to MIL-STD-129, and palletization in accordance with DLA’s packaging requirements. The unit of issue is each, and the sole quantity ordered is one. Shipping must be via the fastest traceable means, explicitly prohibiting parcel post. The delivery address is the Marine Wing Support Squadron 373 in San Diego, with a freight shipping point at Bldg 7209, Miramar Way. The required delivery date is August 3, 2026, and the contract is subject to DLA’s governance, with points of contact and compliance details specified for federal use.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
BRACKET, VEHICULAR C
Solicitation # SPE7L3-26-T-148K
The contract specifies the procurement of one unit of BRACKET, VEHICULAR C with NSN/Part Number 2510-01-706-9524 under solicitation SPE7L3-26-T-148K, with a delivery requirement of five days after award. The item is classified as a commercial item and must comply with MIL-STD-130N for identification marking of U.S. military property. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. The item is subject to strict export control regulations under ITAR or EAR, prohibiting unauthorized disclosure of associated technical data to foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, who have completed required DLA training and questionnaires. The use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification requirements unless explicitly authorized. Inspection and acceptance of the item may occur at the origin, and government identification must be removed from any non-accepted supplies. The point of contact is Lee Miller, with the place of performance located in San Diego, California, and the solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L3-26-T-148F
This contract pertains to the procurement of packed preformed gaskets under solicitation SPE7L3-26-T-148F, with a requirement for four units to be delivered within 88 days to New Cumberland, Pennsylvania. The item is identified by NSN 5330-00-587-9955 and falls under Federal Supply Class 5330/5331. All supplies must comply with stringent packaging standards, requiring medium-duty, waterproof, greaseproof, and opaque packaging per MIL-DTL-117, Type II, Class C, Style 1, specifically to protect against ultraviolet degradation. The contract explicitly prohibits the use of ozone-depleting chemicals in any form and forbids the intentional addition of mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents approved by NAVSEA. When mercury is permitted, a secondary containment must be provided per NAVSEA 5100-003D, and all portable fluorescent lamps or instruments must be shockproof. Supply chain traceability documentation must be retained by the contractor as per DLA Directive Procurement Note C03 from August 2016, and government identification must be removed from non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition size. Covered defense information obligations apply, and all documentation requirements for source approval and delivery are binding. The primary point of contact is Allysson Krumm, with a response deadline of August 17, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-147X
The contract pertains to a gasket with NSN 5330-01-230-7033, requiring a quantity of 119 units to be delivered within 21 days of award. The technical data associated with this item is subject to export control under either ITAR or EAR, meaning any disclosure, even to foreign nationals within the United States, requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on handling DOD export-controlled technical data, and approved access through the DLA questionnaire may receive the controlled information. The solicitation number is SPE7L3-26-T-147X, posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 339991. The contracting activity is managed by the Department of Defense under Land Supplier Ops Vehicle Support, with performance located in New Cumberland, Pennsylvania, and primary point of contact being Susan Diamond at dla.flbb1prs@dla.mil or 614-692-5625.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
DOOR, HATCH, VEHICLE
Solicitation # SPE7L3-26-T-148C
This contract mandates the delivery of one vehicle hatch door identified by NSN 2510-01-725-9385 and part number 403/R7475 from JCB INC under solicitation SPE7L3-26-T-148C, with a required delivery date of July 31, 2026, and a 20-day delivery window from order placement. The item must be supplied as a single unit with zero tolerance for quantity variance and delivered FOB origin. All technical and quality specifications are governed exclusively by the DLA Master List of Technical and Quality Requirements, and any references to ASTM D3951 for packaging are subordinate to these mandatory standards. Packaging must comply with MIL-STD-129 for marking and labeling, adhere to RP001 DLA Packaging Requirements, and be palletized according to specified guidelines. The use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification requirements, and any substitute chemicals require prior approval unless explicitly permitted by the specification. The shipment must be sent via traceable freight methods, excluding parcel post, to the designated government delivery point at BLDG 90312, MACHOL STREET, FORT HUACHUCA AZ 85613-6000, with the same address used for marking and freight shipping. The contract assigns the unit of issue as each (EA) and stipulates the packaging quantity per unit pack is 1. Government use codes, freight control, and delivery tracking identifiers are embedded within the contract, including a traceable control number M2131062090163 and project code TP 3. All performance and compliance obligations are subject to inspection and acceptance at the destination, and the point of contact for inquiries is Lee Miller with the Department of Defense. The contract remains under the jurisdiction of DLA procurement policies and supersedes any civilian or general industry standards unless explicitly aligned with DLA directives.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
BRACKET, VEHICULAR C
Solicitation # SPE7L3-26-T-148G
The contract pertains to the procurement of one unit of a vehicular bracket identified by NSN 2510-01-707-0135 and part number 5270098-329, issued under solicitation SPE7L3-26-T-148G by the Department of Defense through the Land Supplier Operations Vehicle Support agency. Delivery is required within five days of award, with FOB origin terms and no tolerance for quantity variance, meaning exactly one unit must be delivered. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while adhering to all applicable DLA Master List of Technical and Quality Requirements, which take priority. Packaging must be marked and labeled per MIL-STD-129, palletized according to DLA packaging standards, and shipped via the fastest traceable means—parcel post is explicitly prohibited. The item must not contain any Class I ozone-depleting chemicals, and any substitute materials require prior approval unless already authorized by specification. The delivery destination is the Marine Wing Support Squadron 373 in San Diego, with a freight shipping address at Building 7209, Miramar Way, Door 13. The required delivery date is August 3, 2026, and the contract mandates compliance with all DLA procurement directives, including unit of issue and quantity per unit pack specifications. The point of contact for inquiries is Lee Miller, reachable via phone or email provided in the contract data.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE7L3-26-T-148H
The contract specifies the procurement of one mounting plate identified by NSN 2510-01-725-6969 and commercial part number 335/A4213 from JCB INC, with a required delivery within 20 days of contract award. The item is classified as a commercial item and must be delivered FOB origin with no variance allowed in quantity. Packaging must comply with ASTM D3951 and be marked and labeled per MIL-STD-129, with palletization adhering to DLA’s packaging requirements. The use of class I ozone-depleting chemicals is strictly prohibited, superseding any conflicting specification but not reducing other product requirements, and any substitute chemicals require prior approval. Inspection and acceptance occur at the destination, and shipment must be made via traceable means, excluding parcel post. The delivery address is Fort Huachuca, Arizona, with specific marking and routing codes provided for government use. The unit of issue is each, priced at $1.00, with total contract value of $1.00. All technical and quality requirements referenced by R or I numbers from the DLA Master List take precedence over other standards. The required delivery date is July 31, 2026, with the solicitation issued under SPE7L3-26-T-148H and response due by August 17, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
RING, WIPER
Solicitation # SPE7L3-26-T-148D
The contract specifies the procurement of a WIPER RING with part number 842-349641-2 and NSN 5330017297530, requiring six units to be delivered within 140 days under solicitation SPE7L3-26-T-148D. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date. The item is classified as a Critical Application Item under Boeing and must comply with FAA Bare Item Marking Requirements and the FAA Airworthiness Approval CDRL-FAACERTCOM-25015. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03, and packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with no special marking applied. The item must be packaged in a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, due to vulnerability to UV exposure, applicable to direct vendor delivery, foreign military sales, and stock shipments. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. Transportation logistics are governed by DLAD Procurement Notes C19 and C20, and the offeror must comply with all contractual clauses regarding configuration change management, removal of government identification from non-accepted supplies, and packaging of hazardous materials. The contract requires full adherence to DLA packaging standards and uses the approved unit of issue, with pricing at $6.00 per unit totaling $36.00.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE7L3-26-T-147Y
The contract pertains to the procurement of 30 mounting plates identified by part number 230SFT124-1 and NSN 5340-01-334-0797 under solicitation SPE7L3-26-T-147Y. Delivery is required within 10 days from the order date, with shipment FOB origin and no quantity variance allowed. All items must comply with MIL-STD-130N for identification marking and MIL-STD-2073-1E for packaging, with specific packaging codes indicating standard military packing methods, unit container type, and marking in accordance with MIL-STD-129. Special marking is not required. The contract incorporates technical and quality requirements from the DLA Master List, and certain provisions such as removal of government identification from non-accepted supplies and potential coverage under Covered Defense Information apply. Packaging and shipping must also adhere to standards for hazardous materials. The delivery destination is the 6 Supply Depot in Singapore, with freight handled by Plexis Freight in Inglewood, California. The required delivery date is August 4, 2026, and the contract is managed by the Department of Defense through Land Supplier Operations Vehicle Support, with Lee Miller as the primary point of contact.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details