Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SEAL, NONMETALLIC SP

Active
SPE7L3-26-T-117FFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a nonmetallic seal under NSN 5330-01-557-2901, with a quantity of 32 units, to be delivered FOB origin within 134 days of the contract award, with no tolerance for quantity variance. The item must be packaged and sealed in accordance with MIL-DTL-117, Type II, Class C, Style 1—a medium duty, waterproof, greaseproof, and opaque bag—to prevent degradation from UV exposure, a requirement that applies to direct vendor delivery, foreign military sales, and stock shipments. Packaging and marking must strictly comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking codes applied, and palletization must follow DLA packaging standards. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and attributed quality levels are fixed per critical, major, and minor characteristics. The seal is subject to DLA’s master list of technical and quality requirements, and any deviations must align with the revision in effect on the solicitation or award date. The delivery destination is Warner Robins Air Force Base, Georgia, with the freight shipping and parcel post address provided, and transportation details referenced in DLAD procedural notes C19 and C20. The contract, issued under SPE7L3-26-T-117F, was posted on July 14, 2026, with responses due by July 27, 2026, and includes proprietary part numbers from Eaton Corporation, Lockheed Martin Corp, and The Boeing Company, with the original required delivery date set for March 11, 2027.

General Info

32 nonmetallic seals, NSN 5330-01-557-2901, FOB origin, MIL-DTL-117 packaging, zero defects, delivery to Warner Robins AFB by March 11, 2027

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L3-26-T-117F for DLA Land and Maritime Vehicle Support

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUS
Contacts
Susan Diamond
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SEAL,NONMETALLIC SP
SEAL,NONMETALLIC SP
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS (NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
DATA IS PROPRIETARY OR INSUFFICIENT FOR
COMPETITIVE PROCUREMENT
EATON CORPORATION 15284 P/N 13226-350
LOCKHEED MARTIN CORP 98897 P/N 4P99010-191A
THE BOEING COMPANY 81205 P/N 8757-350
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7L3-26-T-117F
SECTION B
PR: 7017439215 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017439215 0001 EA 32.000
NSN/MATERIAL:5330015572901
DELIVERY (IN DAYS):0134
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
Need Ship Date:12/09/2026 Original Required Delivery Date:03/11/2027
SPE7L3-26-T-117F
SECTION B
PR: 7017439215 PRLI: 0001 CONT’D
SPE7L3-26-T-117F NSN/Part Number: 5330-01-557-2901 Quantity: 32 EA Purchase Request: 7017439215QTY: 32 Delivery: 134 days ADO

Similar Contracts

NAICS: 339991
New
DIBBS
POPPET, FILLERThis contract, solicitation SPE4A6-26-R-XB43, is a Total Small Business Set-Aside under NAICS code 339991 issued by the Department of Defense’s ASC Commodities Division for the procurement of a Poppet, Filler, identified by NSN 3655-01-009-2762. The contract is structured as a potential multiple Simplified Indefinite-Delivery Contract with a guaranteed minimum order of 30 units in the first base year and a maximum of 119 units per delivery order, with total estimated contract value capped at $350,000. Performance is required within 101 days after award, with deliveries to various CONUS stock locations, and the overall period of performance, including all options, may not exceed five years. The contract mandates compliance with stringent packaging and marking standards including MIL-STD-129, MIL-STD-2073-1E, RP001, SAE ARP1176 using HCFC-225G, and IP025, with specific labeling requirements for radioactive materials and Product Verification Test Samples. The item is classified as a Commercial Off-The-Shelf (COTS) product subject to zero-defect sampling per MIL-STD-1916, ASQ H1331, or equivalent zero-based plans, with critical, major, and minor attributes requiring AQLs of 0.1, 1.0, and 4.0 respectively. Invoice submission must be completed electronically via WAWF using specific document combinations depending on deliverable type, and payment routing requires accurate DoDAAC information from contract blocks. The contractor is bound by FAR and DFARS clauses including termination for convenience and default, authorized deviations, computer-generated forms, and the Supplier Performance Risk System notification, along with DFARS clauses governing subcontracting practices for commercial products and cybersecurity compliance under CMMC, requiring a valid certification not older than 180 days and annual affirmations of compliance. The contractor must also adhere to DPAS prioritization requirements, handle hazardous materials under specific federal acts, and comply with cybersecurity protocols for handling FCI or CUI. Any unauthorized use of foreign-flag vessels permits equitable adjustment, and failure to notify the Contracting Officer of sea transportation after initially representing non-use requires full compliance with applicable clauses. The offeror must submit proposals electronically via email or DIBBS, with
ASC COMMODITIES DIVISION

POSTED

in about 3 hours

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMEDThis contract covers the procurement of preformed packing items under the National Stock Number 5330001721919 with an estimated quantity of 8,993 units to be delivered within 98 days under FOB origin terms. The item is designated as a critical application item and strictly prohibits the use of asbestos as defined in FED-STD-313. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-117 Type II Class C Style 1, requiring medium duty, waterproof, greaseproof, opaque packaging for all direct vendor delivery, foreign military sales, and stock shipments. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA packaging requirements. The contract enforces a zero variance in quantity, with inspection and acceptance occurring at the destination. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. Items are sourced from approved suppliers including Halex Brake Products Corporation and Oshkosh Defense LLC. The procurement is a total small business set-aside under NAICS code 339991, with the Strategic Acquisition Program Directorate managing the solicitation under number SPE7LX-26-U-8804.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
GASKETThis contract, under solicitation number SPE7L1-26-T-833L, specifies the procurement of two gaskets identified by NSN 5330-01-450-6775 and part number ED0044001410-S, with a required delivery within five days of award. The items must be furnished in strict compliance with military packaging standards including MIL-STD-2073-1E and MIL-STD-129 for marking, and must be sealed in a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, to protect against UV degradation. No asbestos is permitted per Fed-Std-313, and mercury or mercury-containing compounds are prohibited except for specific functional applications such as batteries, fluorescent lamps, sensors, weapon systems, and Navsea-approved chemical reagents—portable mercury-containing devices must include a secondary containment and be shockproof as defined by NAVSEA 5100-003D. The contract mandates adherence to DLA packaging guidelines, hazardous materials shipping procedures under IP025, and requires delivery FOB origin with zero variance in quantity. The shipment must be sent via traceable freight to Fort Stewart, Georgia, with no use of parcel post, and must include specified internal routing identifiers and project codes. The supplier must be registered under CAGE codes 62445 or 9XWR4, matching the approved part numbers, and is subject to inspection and acceptance at destination.
LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
PARTS KIT, SEAL REPLThe contract pertains to a Parts Kit, Seal Replacement, with a specified quantity of 14 units under NSN 5330-01-670-1587, solicited under number SPE7L3-26-Q-1178 with a response deadline of July 21, 2026, and a 90-day delivery requirement after award. All items must be free of asbestos, and any alternatives to listed part numbers containing asbestos require approval under Clause L30 and Provision 4 conditions. The kit must comply with MIL-DTL-117, Type II, Class C, Style 1, requiring packaging in a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, a requirement applicable to direct vendor delivery, foreign military sales, and stock shipments. Identification marking must adhere to MIL-STD-130N, and government identification must be removed from non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The contract falls under NAICS code 339991 and is managed by the Department of Defense’s Land Supplier Operations Vehicle Support organization, with performance located in New Cumberland, PA, and primary point of contact Susan Diamond.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC ROUNDThe contract specifies the procurement of five nonmetallic round seals under NSN 5330-15-056-2381, with a delivery requirement of 90 days after award. The item must be packaged and sealed in a medium-duty, waterproof, greaseproof, and opaque bag compliant with MIL-DTL-117, Type II, Class C, Style 1, to protect against UV degradation, as the Federal Supply Classifications 5330/5331 items are susceptible to UV damage. This packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. The seals must be free of asbestos, and any alternatives must conform to Clause L30 and Provision 4 conditions. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The item must be marked in accordance with MIL-STD-130N for identification of U.S. military property, and government identification must be removed from non-accepted supplies. Covered defense information provisions apply, and the place of performance is New Cumberland, PA, 17070-5002. The solicitation number is SPE7L3-26-Q-1186, posted on July 14, 2026, with responses due by July 21, 2026, under NAICS code 339991, and point of contact is Susan Diamond at DLA.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

in 6 days
View Details