Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SEAL, NONMETALLIC SP

Active
SPE7L3-26-T-137EFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for a nonmetallic, specially shaped seal identified by NSN 5330-00-295-1440, with a quantity of 55 units, under solicitation SPE7L3-26-T-137E, issued as a Women-Owned Small Business Set-Aside. The item must be packaged in a medium-duty, waterproof, greaseproof, and opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, to protect against ultraviolet degradation, and this packaging requirement applies to direct vendor deliveries, foreign military sales, and stock shipments. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The seal is subject to strict configuration change management and requires prior authorization for any variance or deviation. Export-controlled technical data associated with this item falls under either ITAR or EAR regulations, restricting disclosure to foreign persons without prior U.S. government authorization, including foreign national employees and subsidiaries. Access to such data is limited to DLA contractors who hold an approved US/Canada Joint Certification Program status, have completed mandatory training on handling export-controlled data, and have been formally approved by the DLA. The seal must comply with MIL-STD-130N for identification marking of military property, and government identification must be removed from non-accepted supplies. Delivery is due 128 days after order, with performance at Robins Air Force Base, Georgia. Documentation for source approval requests must be submitted where proprietary or insufficient data impedes competitive procurement. The contract is managed by the Department of Defense’s Land Supplier Operations Vehicle Support office, and all inquiries should be directed to the designated point of contact.

General Info

55 nonmetallic seals, NSN 5330-00-295-1440, MIL-DTL-117 packaging, ITAR/EAR controlled, delivery in 128 days to Robins AFB.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, US

Set-Aside

WOSB

Documents

(1)

SPE7L3-26-T-137E.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUS
Contacts
Susan Diamond
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SEAL,NONMETALLIC SP
SEAL, NONMETALLIC SPECIAL SHAPED SECTION
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD002, COVERED DEFENSE INFORMATION APPLIES
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS (NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
DATA IS PROPRIETARY OR INSUFFICIENT FOR
COMPETITIVE PROCUREMENT
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data
SPE7L3-26-T-137E
SECTION B
Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5330-00-295-1440 Quantity: 55 EA Purchase Request: 7017225771QTY: 55 Delivery: 128 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
International
WATERTIGHT CONNECTOR & H AND C CRIMPS (M9-7)Saskatchewan Power Corporation is seeking bids for the purchase and delivery of watertight connectors and H and C crimps under solicitation number 1017555, titled WATERTIGHT CONNECTOR & H AND C CRIMPS M9-7. The tender was posted on MERX on July 28, 2026, with a response deadline of August 18, 2026, at 2:00 PM Central Time. All bid submissions must comply with the requirements outlined in the Invitation to Tender document, which is accessible through MERX. Any amendments, clarifications, or addenda will be posted exclusively on MERX, and in the event of inconsistencies between documents, the PDF version of the Invitation to Tender shall govern. A downloadable Word version is available for reference, though it is not binding. The goods are to be delivered to locations within Saskatchewan, and primary point of contact for inquiries is Mayur Parmar, reachable at 306-566-2769. Bidders are advised to review all documentation carefully and monitor MERX for updates prior to submission.
Saskatchewan Power Corporation

POSTED

about 16 hours ago

DEADLINE

in 20 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAINThe contract pertains to the procurement of one unit of a plain seal identified by NSN 5330-01-584-9181 and purchase request number 7017465423, with a required delivery within 20 days to the destination APO AE 09321, FOB destination. Packaging must comply strictly with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. The item is classified under the DoD unit of issue system, and packaging and palletization must adhere to DLA’s official packaging requirements referenced in RP001. The delivery is destined for the Royal Jordanian Air Force at Muwaffaq Salti Air Base in Jordan, with transportation logistics governed by DLAD procedural notes C19 and C20. The contract includes detailed government-use codes and project identifiers, and full technical and quality specifications are incorporated by reference from the DLA Master List of Technical and Quality Requirements. The solicitation number is SPE7L1-26-T-885J, issued under a federal acquisition framework with a response deadline of August 10, 2026, and an original required delivery date of July 15, 2026.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SPThis contract specifies the procurement of a nonmetallic special shaped seal, identified by NSN 5330-01-529-1025, with a unit of issue of one 10-foot roll (RO), totaling 16 rolls. The item is classified as a commercial item and a critical application product, requiring engineering source approval due to its restricted source status. It must comply with stringent technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-DTL-117, Type II, Class C, Style 1, which mandates medium duty, waterproof, greaseproof, and opaque packaging for UV protection. The seal is subject to a non-extendable shelf life of 240 months and must contain no asbestos or class I ozone-depleting chemicals. Packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129, with special shelf-life marking code 32 applied. Delivery is due within 70 days FOB origin to the designated receiving warehouse in Tracy, California, with no variance permitted in quantity. The supply chain is restricted to approved vendors including Accurate Elastomer Products, Inc. and American Rubber Company, LLC, with specific part numbers assigned. Documentation for source approval, configuration changes, and hazardous material handling is required, and all deliveries must comply with DLA packaging and transportation procedures. The solicitation was issued on July 28, 2026, with a response deadline of August 10, 2026, and the original required delivery date is December 12, 2026.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SEAL, TURBINE ROTORThe contract is for the procurement of six SEAL, TURBINE ROTOR units identified by NSN 5330-00-163-5815 under solicitation SPE7L3-26-T-136F, with a delivery requirement of 161 days after award. The item is subject to strict compliance with DLA packaging standards and technical quality requirements referenced in the DLA Master List of Technical and Quality Requirements, where any R or I designations must be adhered to as defined in that master list. The specification explicitly prohibits the use of asbestos as defined in FED-STD-313, and all non-accepted supplies must have government identification removed prior to return. The procurement falls under NAICS code 339991 and is managed by the Department of Defense through the Land Supplier Operations Vehicle Support organization, with performance required at Cherry Point, North Carolina, zip 28533-5040. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and the primary point of contact is Susan Diamond at DLA, reachable via phone or email for procurement inquiries.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC STThe contract is for the procurement of 22 units of a nonmetallic strip seal with NSN 5330-01-183-7118, under solicitation SPE7L1-26-T-884U, issued by the Department of Defense’s Land Supply Chain. The item is classified as a commercial off-the-shelf product, and delivery is required within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. Sampling and inspection must comply with MIL-STD-1916 or ASQ H1331 Table 1, using a zero-defect acceptance criterion unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. The place of performance is Tinker AFB, OK, with Kristina Derry listed as the primary point of contact and the response deadline set for August 10, 2026.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC ROUNDThe contract specifies the procurement of 45 nonmetallic round section seals with NSN 5330-01-481-0128 under solicitation SPE7L1-26-U-0506, issued by the Department of Defense’s Land Supply Chain. Delivery is required within 97 days of award, and the solicitation was posted on July 28, 2026, with responses due by August 12, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Configuration changes require formal engineering change proposals or variance requests, and non-accepted supplies must have government identification removed. The contract applies to both manufacturers and non-manufacturers, and the point of contact is Jennifer Payne at DLA, reachable via email or phone.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMEDThe contract pertains to the procurement of preformed packing components identified by NSN 5330-01-124-2449, with a quantity of 78 units, to be delivered FOB origin within 91 days to the DLA Distribution facility in New Cumberland, Pennsylvania. The packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, requiring medium duty, waterproof, greaseproof, and opaque materials to protect against UV degradation, as the item falls under Federal Supply Classifications 5330/5331. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, including oxygen cleaning requirements and special marking code ZZ for additional specifications. Palletization follows DLA packaging standards, and all shipments must include proper identification in accordance with MIL-STD-130N. The item is classified as a critical application and must be free of asbestos and any intentional addition of mercury or mercury compounds, with exceptions permitted only for specific functional uses such as batteries, instruments, or weapons systems, which must include secondary containment per NAVSEA 5100-003D. Inspection and acceptance occur at origin, with zero tolerance for quantity variance. The solicitation is governed by DLA’s master list of technical and quality requirements, referenced by R and I numbers, and the revision in effect on the solicitation issue date controls compliance. The contract is issued under solicitation SPE7L3-26-T-9544, with a response deadline of July 31, 2026, and a unit price of $78.00 per unit.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMEDThis contract, identified by solicitation number SPE7LX-26-U-9049, seeks the procurement of 322 units of preformed packing with NSN 5330-01-172-2590, to be delivered within 80 days of award. The requirement incorporates all technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. Compliance with MIL-STD-130N for identification marking of U.S. military property is mandatory, and all items must be free of Class I ozone-depleting chemicals, with any substitutes requiring prior approval unless explicitly authorized by the specification. The contract enforces strict export control protocols under ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons or entities, and restricts access to contractors who hold valid US/Canada Joint Certification Program certification, have completed required DLA training on handling export-controlled data, and obtained formal approval from the DLA controlling authority. Configuration changes require formal engineering change proposals and variance requests, and all government identification must be removed from non-accepted supplies before disposal. Cybersecurity compliance mandates CMMC Level 2 certification for third-party assessment organizations involved in performance, and covered defense information is subject to applicable DFARS clauses, including DFARS 252.225-7048. The performance location and delivery terms are governed by U.S. federal standards, and inquiries should be directed to the primary point of contact, Theodore Misiolek, at the provided DLA email and phone.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
KIT, FS 737The contract specifies the procurement of a KIT, FS 737, consisting of a two-part urethane sealant in a dual-chamber cartridge containing 50 cc with two mixing nozzles, designed to form a watertight, flexible seal and colored green. Each unit must be packaged in a cartridge with a MIL-STD-129 label that includes the lot or batch number, and all packaging must comply with DLA packaging requirements. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item must be physically marked per RQ017 and comply with all source approval documentation requirements. The supplier is required to provide Safety Data Sheets (SDS) in compliance with OSHA’s updated Hazard Communication Standard, effective June 1, 2015, replacing Material Safety Data Sheets (MSDS), and must submit HCS-compliant labels or those meeting CPSA/FHSA standards prior to award. Suppliers must also ensure employee training on the new SDS format and labeling requirements under 29 C.F.R. 1910.1200. Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is mandatory, and the contract incorporates Covered Defense Information protocols. The item, identified by NSN 5999-01-615-5898, is for a single unit with a five-day ADO delivery requirement under solicitation SPE4A0-26-T-4082, issued by the Department of Defense’s Aviation Supply Chain ESOC Buys, with Danita Davis listed as the primary point of contact for procurement inquiries.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
SEAL, INTERFACE AIRCThis contract pertains to the procurement of four units of a seal interface for a 25 mm gunport and mount, designated by NSN 1560-01-388-9484 and part number LE261-0122-0005, sourced from SEAL SCIENCE, INC. and RUBBERCRAFT CORPORATION OF CALIFORNIA. The item is classified as a critical application component and must comply with all applicable technical, quality, and packaging requirements outlined in the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation or award date depending on acquisition size. Mandatory standards include MIL-STD-1916 or ASQ H1331 for sampling with zero non-conformances required unless otherwise specified, and verified attributes must adhere to specific verification levels or AQLs. Packaging must follow DLA requirements RP001 and MIL-STD-129, with hazardous materials conforming to FED-STD-313 and IP025, while non-hazardous items must meet ASTM D3951, though DLA requirements override any conflicting commercial standards. The delivery is FOB origin with a firm fixed price and no variance allowed in quantity, and inspection and acceptance occur at the manufacturer’s facility. The item is not subject to Item Unique Identification as per customer request, though physical marking per RQ017 is required. Cybersecurity compliance mandates a CMMC Level 2 self-assessment, and documentation for source approval must be submitted per RC001. Delivery is due 330 days after award, with all shipments directed to DLA Distribution Warner Robbins, Georgia. The contract is issued under solicitation SPE4A7-26-Q-0894, with a response deadline in August 2026 and a required delivery date of September 25, 2027. The contract specifies detailed handling for packing and labeling and references transportation protocols per DLAD proc notes, with the DLA as the contracting authority and Shenita Tirado as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 9 days
View Details
NAICS: 339991
New
DIBBS
O-RINGThe contract pertains to the procurement of 82 O-rings with NSN 5331-01-165-1343 under solicitation number SPE7L3-26-Q-1227, with a delivery deadline of 120 days after award. The contract incorporates mandatory technical and quality requirements referenced by R and I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. Packaging must comply with DLA Packaging Requirements RP001, and all supplies must be free of government identification if not accepted, as per RQ011. Contractors are required to retain supply chain traceability documentation in accordance with DLAD Procurement Note C03 from August 2016. The use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification provisions, and substitute chemicals must be approved unless explicitly authorized. Items must be completely free of asbestos, and any alternative materials require formal approval under Clause L30 and Provision 4 Conditions. The solicitation was posted on July 28, 2026, with responses due by August 8, 2026, and the point of contact is Rajesh Sehgal at the Department of Defense, Land Supplier Operations Vehicle Support.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
GASKETING MATERIAL,The contract is for gasketing material with NSN/Part Number 5999-01-506-6277 in a quantity of 280 units, under solicitation number SPE7M0-26-T-020U, with a total small business set-aside classification. Delivery is required within five days after date of award, and responses must be submitted by August 10, 2026. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation issue date or award date depending on the scale of acquisition. The item is subject to export control under ITAR or EAR, meaning technical data associated with it cannot be disclosed to foreign persons without prior authorization from the Department of State or Commerce, and this restriction extends to foreign national employees and subsidiaries. Only contractors with approved US/Canada Joint Certification Program certification, completed DLA export control training, and approved access via the DLA questionnaire are permitted to handle this data. Physical marking and removal of government identification from non-accepted supplies are required, and the place of performance is specified as Chambersburg, Pennsylvania, with Gerard Quinn of the Department of Defense serving as the primary point of contact.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 332994
New
DIBBS
ARMOR, SUPPLEMENTAL,This contract pertains to the procurement of supplemental armor for small arms fragmentation protection, identified by NSN 2540-01-586-2711, with a total quantity of eight units delivered under a firm fixed price structure. Delivery is required within 108 days after award, with inspection and acceptance occurring at the destination, and FOB terms set at origin. The contract mandates strict adherence to DLA packaging requirements, including compliance with MIL-STD-129 for marking and labeling, ASTM D3951 for commercial packaging if the item is non-hazardous, or Fed-Std-313 and TQ requirement IP025 if classified as hazardous, with all DLA Master List of Technical and Quality Requirements taking precedence over industry standards. Palletization must conform to RP001, and the item must be shipped to the designated DLA Distribution Red River receiving facility in Texarkana, Texas. The solicitation requires a CMMC Level 2 Self-Assessment for cybersecurity compliance and prohibits removal of government identification from non-accepted supplies. Price breaks are specified for incremental quantity ranges from one to fifteen units, with a zero percent variance allowed on the ordered quantity. The unit of issue is each, and the corresponding ANSI X12 unit must be verified through the official DLA link. The contract is issued under solicitation SPE7L3-26-Q-1226, with a response deadline of August 7, 2026, and a required delivery date of January 15, 2026. All technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List, and the contract is governed by DLA procedures for transportation, packaging, and handling as outlined in specific procedural notes and federal standards.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 9 days
View Details
NAICS: 336390
New
DIBBS
VALVE, RELAY, AIR PRESSUThis contract specifies the procurement of a valve, relay, air pressure, identified by NSN 2530-01-479-1014 and part numbers K161992OR, M81574, and 5013223 from approved suppliers including BENDIX COMMERCIAL VEHICLE SYSTEMS LLC, ROSENBAUER INTERNATIONAL AG, and DANA COMMERCIAL VEHICLE PRODUCTS. The requirement is for 76 units at a unit price of $76.00, totaling $5,776.00, with delivery due in 137 days from contract award, FOB origin, and no variance allowed in quantity. Inspection and acceptance occur at destination, with packaging required to comply with MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking codes. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and this is a critical application item subject to removal of government identification from non-accepted supplies. The contract is a total small business set-aside under NAICS code 336390, with a response deadline of August 10, 2026, and the awarding agency is the Department of Defense under Land Supplier Operations Vehicle Support. Delivery must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20, and the original required delivery date is January 10, 2027.
Other Motor Vehicle Parts Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
PAN, DRAINThis contract pertains to the procurement of five units of a PAN, DRAIN item with NSN 4910-01-626-4341 under solicitation SPE7L3-26-T-136B, issued by the Department of Defense through the Land Supplier Operations Vehicle Support office. Delivery is required within 147 days of award, with FOB origin terms and inspection and acceptance occurring at the destination warehouse in Tracy, California. The item must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking codes applied, and must be palletized according to DLA packaging guidelines. The contract explicitly prohibits the use of ozone-depleting chemicals and restricts mercury or mercury-containing compounds unless specifically exempted for approved functional applications such as certain batteries, lighting, or weapon systems, with additional containment requirements for portable devices. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Unit of issue is each (EA), with zero variance allowed in quantity, and shipment must follow DLAD procedural notes C19 and C20. The required ship date is January 5, 2027, with an original delivery deadline of January 18, 2027. All supplies must conform to DoD authorized unit of issue standards, and substitute materials must be pre-approved unless explicitly authorized by the specifications.
Other Electronic Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
PARTS KIT, SPECIALIZEDThe contract pertains to a Parts Kit, Specialized, identified by NSN 2590-01-495-6900, with a quantity of 113 KT and a purchase request number 7017603450 for a quantity of 287 units. Delivery is scheduled for 141 days after order date. Technical data associated with this item is subject to strict export controls under either ITAR or EAR, prohibiting any unauthorized disclosure or transfer to foreign persons, including foreign nationals within the United States or overseas. Compliance with DFARS 252.225-7048 is mandatory, and distribution is restricted to DLA contractors with approved US/Canada Joint Certification Program status, verified training completion on handling controlled technical data, and formal approval from DLA authorities. The solicitation, numbered SPE7L3-26-T-136D, was posted on July 28, 2026, with responses due by August 10, 2026, and is designated as a Total Small Business Set-Aside under NAICS code 333998. The contracting activity falls under the Department of Defense through the Land Supplier Operations Vehicle Support agency, with performance located in Jacksonville, Florida, and primary point of contact being Matthew Curry.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
FELT, MECHANICAL, PREFORThe contract pertains to the procurement of 385 units of FELT, MECHANICAL, PREFORMED with NSN 5330-00-599-8279, specified to meet precise dimensional requirements of 5.500 inches in outer diameter, 4.734 inches in inner diameter, and 0.187 inches in thickness. The item is classified as a commercial item and must be manufactured in accordance with the current revision of a recognized part standard, either military or consensus non-governmental, with prior revisions still acceptable for historical hardware. All new units produced after the solicitation date must conform to the latest standard revision. The item must comply with MIL-STD-130N for identification marking, contain no asbestos as defined by FED-STD-313, and is subject to critical item source inspection. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with a zero-defect acceptance criterion unless otherwise stated, and unspecified attributes are treated as major with assigned verification levels or AQLs. The purchase is fully competitive under a military or federal specification. The solicitation number is SPE7L3-26-T-135S, issued on July 28, 2026, with a response deadline of August 7, 2026. Delivery is required within 48 days after award, and performance is designated for Robins AFB, GA, ZIP 31098-1887. The contracting agency is the Department of Defense under Land Supplier Opns Vehicle Spt, with Susan Diamond as the primary point of contact via email dla.flbb1prs@dla.mil and phone 6146925625. The NAICS code is 333998, and the acquisition falls under DLA packaging and technical quality requirements, incorporating standards from the DLA Master List of Technical and Quality Requirements. The procurement does not involve any set-aside designation and is subject to the DLA master list revision in effect on the solicitation issue date.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332994
New
DIBBS
SIGHT, REARThe contract pertains to the procurement of a rear sight component designated by NSN 1005-01-499-6868 and part number 98474, with an estimated quantity of 58 units to be delivered FOB origin within 139 days. The item is classified as a defense article subject to the International Traffic in Arms Regulations and the Arms Export Control Act, requiring all manufacturers and exporters to be registered with the Directorate of Defense Trade Controls; failure to provide proof of registration may result in disqualification. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which overrides other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with all items packed according to ASTM D3951 only where not superseded by DLA directives. Supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03 from August 2016, and all government identification must be removed from non-accepted supplies. The product falls under Category I munitions and requires demilitarization per DODM 4160.28-Vol. 3, and covered defense information protocols apply. A Cybersecurity Maturity Model Certification Level 2 self-assessment is also required. The contract is issued under DLA Direct, CONUS coverage with zero tolerance for quantity variance, inspection and acceptance occurring at destination, and the solicitation number is SPE7L3-26-U-0654 with a response deadline of August 12, 2026.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332999
New
DIBBS
SUPPORT, STRUCTURALThis contract under solicitation number SPE7L3-26-T-9467 seeks one unit of a structural support item identified by NSN 2510-01-690-3838, with a delivery requirement of 20 days after award. The solicitation incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones unless amended. Packaging must comply with DLA standards, and all government identification must be removed from non-accepted supplies. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Components subject to Qualified Products Lists or Qualified Manufacturers Lists must meet the qualification criteria outlined in procurement note H02. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location; access is limited to contractors certified under the US/Canada Joint Certification Program, who have completed DLA-mandated training and received formal approval. The place of performance is Fort Riley, Kansas, with Lee Miller of the Department of Defense’s Land Supplier Operations Vehicle Support serving as the primary point of contact.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332119
New
DIBBS
KNOBThis contract pertains to the procurement of one unit of a specific knob component identified by NSN 5355016272721 and part number U-CAR-016-A, with a complementary part number P9-096-40-M4N-15 from SOUTHCO INC. The delivery is required within ten days of contract award, with FOB origin terms, zero tolerance for quantity variance, and inspection and acceptance occurring at the destination. Packaging must strictly comply with ASTM D3951, unless superseded by higher-priority technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with all packaging and labeling conforming to MIL-STD-129 and DLA Packaging Requirements RP001. The unit must be palletized according to the specified DLA standards, and the shipment must be sent via the fastest traceable means, explicitly prohibiting parcel post. The consignee is the US Army at Fort Bliss, Texas, designated under the military freight code W4546F, with shipment reference RDD 555, project code TP 2, and mandatory marking including the TCN W4546F61700153. All supplies must have government identification removed if not accepted. The contract is issued under solicitation SPE7L3-26-T-137D with a required delivery date of June 25, 2026, and involves Covered Defense Information as defined by applicable regulations.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details