Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SEAL, NONMETALLIC SPECI

Active
SPE7L3-26-T-123SFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a nonmetallic special shaped seal designated as part number 146T7264-13 with NSN 5330-01-727-5389, requiring four units for delivery under solicitation SPE7L3-26-T-123S. The item is classified as a critical application with strict airworthiness approval requirements from the Federal Aviation Administration, and must comply with all relevant technical and quality standards referenced in the DLA Master List. All supplies must be traceable through the supply chain per DLA Directive Procurement Note C03 from August 2016, and contractors must retain documentation for audit purposes. The item must not contain any Class I ozone-depleting chemicals, and any substitute materials require prior approval. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on their criticality. Packaging and marking adhere to MIL-STD-130N, MIL-STD-129, and MIL-DTL-117 Type II Class C Style 1, requiring the seal to be enclosed in a medium-duty, waterproof, greaseproof, opaque bag to protect against UV degradation. These packaging standards apply to direct vendor delivery, foreign military sales, and stock shipments. The item must be palletized according to DLA packaging requirements, with all labeling and marking fully compliant and devoid of special codes. Transportation follows DLA Procurement Notes C19 and C20, with delivery FOB origin to Tinker AFB, Oklahoma by March 13, 2027. The contract imposes a 0% variance on quantity, with inspection and acceptance occurring at destination. The acquisition is subject to covered defense information protocols, and all data and documentation must be handled in accordance with federal security requirements.

General Info

Four nonmetallic seals, part number 146T7264-13, FOB origin to Tinker AFB by March 13, 2027, FAA-certified, traceable, zero defects, no ozone-depleting chemicals.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L3-26-T-123S for DLA Land and Maritime Vehicle Support

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUS
Contacts
Susan Diamond
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SEAL,NONMETALLIC SPECIAL SHAPED SECTION
SEAL,NONMETALLIC SP
RQ046: FAA Bare Item Marking Requirements RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RP003: PRESERVATION, PACKAGING, PACKING AND MARKING REQUIREMENTS FOR
FEDERAL AVIATION ADMINISTRATION COMMERICAL MATERIAL
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SPE7L3-26-T-123S
SECTION B
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.
RQ019: Federal Aviation Administration (FAA) Airworthiness Approval
CRITICAL APPLICATION ITEM
THE BOEING COMPANY 81205 P/N 146T7264-13
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 CDRL-FAACERTCOM-25015 REVISION NR DTD 01/14/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017528746 0001 EA 4.000
NSN/MATERIAL:5330017275389
DELIVERY (IN DAYS):0224
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
SPE7L3-26-T-123S
SECTION B
PR: 7017528746 PRLI: 0001 CONT’D
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:GB CUSH/DUNN MAT:JB CUSH/DUNN THKNESS:B
UNIT CONT:BE OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:03/13/2027 Original Required Delivery Date:03/13/2027
SPE7L3-26-T-123S NSN/Part Number: 5330-01-727-5389 Quantity: 4 EA Purchase Request: 7017528746QTY: 4 Delivery: 224 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
Supply of O-Rings (NSN 5331017272526)The contract is for the supply and delivery of O-rings identified by NSN 5331017272526 under CLIN 0001, with delivery terms set at FOB Origin, meaning responsibility and risk transfer to the buyer upon shipment from the supplier’s location. Inspection and formal acceptance of the goods will occur at the destination, ensuring compliance with quality and specification standards prior to final payment. The item is categorized under NAICS Code 339991, indicating manufacturing of other miscellaneous fabricated metal products, and the contracting entity is the Defense Logistics Agency within the Department of Defense. The contract was posted on July 20, 2026, and is structured as a subcontract under the DIBBS system with the identifier SPE7LX26D0066.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

N/A
View Details
NAICS: 339991
New
DIBBS
Nonmetallic Special Shaped Seal Manufacturing & SupplyFour nonmetallic special shaped seals, Part No. 146T7264-13 with NSN 5330-01-727-5389, are to be manufactured and supplied for a critical application requiring strict compliance with FAA airworthiness standards and Defense Logistics Agency specifications. Full supply chain traceability is mandatory to ensure material integrity and regulatory adherence throughout production. The items must be delivered FOB origin to Tinker AFB, Oklahoma, with an estimated delivery window aligning with the submission deadline of July 31, 2026. This subcontract falls under NAICS code 339991 and is issued under the Department of Defense’s Land Supplier Operations Vehicle Support organization, with no set-aside provisions designated. All manufacturing must meet the stringent quality and documentation requirements inherent to defense and aviation critical components.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
Gasket Supply and Delivery (NSN 5330012931007)The contract requires the supply and delivery of six gaskets identified by NSN 5330012931007, which must comply with applicable military or commercial specifications, to be delivered to DLA Land and Maritime no later than July 27, 2026. The item falls under NAICS code 339991, indicating it is related to other miscellaneous manufacturing, and the contract is classified as a subcontract within the Department of Defense procurement structure. The order is managed by the Defense Logistics Agency, which oversees the logistics and supply chain needs of the U.S. military, ensuring that the gaskets meet required standards for operational use. The place of performance and point of contact details are not specified, and the solicitation number is not provided, suggesting this may be a direct award or follow-on action under an existing agreement. The contract was posted on July 20, 2026, and is accessible through the DIBBS system with a reference link for tracking and documentation purposes.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

N/A
View Details
NAICS: 339991
New
DIBBS
Gasket Manufacturing and SupplyThe contract involves the manufacture and delivery of nine units of a specific gasket identified by NSN 5330015316118, fully compliant with military specifications covering material composition, packaging standards, marking requirements, and a guaranteed 36-month shelf life. This is a subcontract under the Department of Defense, awarded by the Defense Logistics Agency, and is intended to support military supply chain needs through strict adherence to technical and quality benchmarks. All units must meet exacting performance and durability standards to ensure operational reliability in critical defense applications. The contract is posted under NAICS code 339991, indicating a classification within other miscellaneous manufacturing, and carries no set-aside provisions. The place of performance and point of contact details are not specified, but the contractual obligations are tied to the Defense Logistics Agency's procurement system, with the award record accessible via the provided DIBBS link. Delivery timelines and payment terms are governed by standard subcontract protocols under DOD procurement guidelines.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

N/A
View Details
NAICS: 339991
New
DIBBS
Precision Rubber Sealing Component Supply (O-Ring)The contract involves the supply of two O-rings identified by NSN 6530-01-378-0253, manufactured to meet strict military specifications ensuring form, fit, function, and full traceability to Steris Corporation or an approved alternate source. The components are critical sealing elements requiring adherence to high-quality standards and documented lineage to guarantee compliance with defense system requirements. The solicitation is structured as a subcontract under NAICS code 339991 for other miscellaneous manufacturing, with the place of performance located in Chandler, 74834-0800, and the overarching organization is the Department of Defense through the LAND SUPPLY CHAIN. The posting date is July 20, 2026, and responses must be submitted by July 31, 2026, with further details accessible via the official DIBBS link provided.
LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
Supply of Conical Flared Tube Fitting Seals (NSN: 4730-00-436-1962)The contract involves the manufacture, packaging, and delivery of 1,423 conical flared tube fitting seals designated by NSN 4730-00-436-1962, all of which must fully comply with military specifications and meet stringent oxygen-clean standards to ensure safety and performance in high-risk environments. Full traceability is required for every component, documenting materials, processing steps, and quality control measures from production through final delivery. The work is being performed under a subcontract for the Defense Logistics Agency, a branch of the Department of Defense, and is classified under NAICS code 339991 for miscellaneous manufacturing. Although no specific delivery location or point of contact is provided, the seals are intended for military use and must adhere to exacting technical and procedural requirements to support critical defense systems. The solicitation was posted in July 2026, indicating this is a future-directed procurement.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

N/A
View Details
NAICS: 339991
New
DIBBS
Supply of Standardized Seal (NSN 5330011023254)The contract mandates the procurement and delivery of one standardized seal identified by NSN 5330011023254 and part number 8J1688, ensuring full compliance with federal supply standards. The item must be shipped using a traceable method to Fort Leonard Wood, Missouri, with delivery required no later than July 27, 2026, under FOB destination terms, meaning title and risk of loss transfer to the government upon arrival at the destination. The procurement is executed under a subcontract tied to the Defense Logistics Agency with the NAICS code 339991, indicating involvement in other miscellaneous manufacturing. The contract was posted on July 20, 2026, and is part of a broader Department of Defense supply chain initiative aimed at maintaining operational readiness through precisely specified components.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

N/A
View Details
NAICS: 339991
New
DIBBS
Supply of Nonmetallic Seals with Military Compliance and IUID MarkingThe contract entails the supply of 19 nonmetallic seals that must fully comply with MIL-DTL-117 and MIL-STD-130 military standards, ensuring they meet rigorous performance and identification requirements. Each seal must be individually marked with an IUID tag for unique identification and full traceability throughout its lifecycle, as mandated by Department of Defense protocols. The packaging must adhere to specified military guidelines to protect the integrity of the seals during transit and storage. Delivery is scheduled for Tinker Air Force Base, where the seals will be integrated into critical defense systems. The work is classified as a subcontract under NAICS code 339991, and the contracting authority is the Defense Logistics Agency under the Department of Defense. The solicitation was posted in July 2026, and all deliverables are subject to strict military compliance and documentation standards.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

N/A
View Details
NAICS: 339991
New
DIBBS
Nonmetallic Seal Manufacturing for Aerospace ApplicationsThe contract requires the manufacture of 3,000 nonmetallic seals identified by NSN 5330-01-697-5551 and part number L3223771-074, strictly adhering to Boeing Drawing 43999 LP261-0011 and ASME Y14.5 dimensional tolerances. These seals are designated for critical aerospace applications and must be produced without any bolt or fastener holes to ensure structural integrity and performance under extreme conditions. The work is being conducted under a subcontract arrangement through the Defense Logistics Agency, a component of the Department of Defense, with the North American Industry Classification System code 339991 indicating specialized manufacturing services. The solicitation was posted on July 20, 2026, and the contract award is identified by the number SPE7L326P4996, though no specific place of performance or point of contact is provided in the details.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

N/A
View Details
NAICS: 339991
New
DIBBS
GASKETThis contract specifies the procurement of a critical safety item gasket with National Stock Number 5330-01-213-7017 under solicitation SPE7L3-26-Q-1195, issued as a total small business set-aside. The item must be supplied by approved manufacturers including Stillman Seal Corporation and General Electric Company, using part numbers 1154M18P06 and 1154M18P26 respectively, and must conform to Technical Data Package Revision A Gen 2 dated December 30, 2014. All supplies are subject to stringent technical and quality requirements referenced from the DLA Master List, including MIL-STD-130N for identification marking and MIL-STD-129 for labeling, with each unit required to carry lot and serial numbers. Packaging must comply with MIL-DTL-117 Type II Class C Style 1, using waterproof, greaseproof, opaque bags, and palletization must follow DLA Packaging Requirements. The gasket is designated a Critical Safety Item by the Air Force, requiring prior approval for any waivers or deviations. The contract mandates firm fixed pricing with zero variance allowed in quantity, and inspection and acceptance occur at origin. Delivery is due within 125 days after award, with freight destinations specified for San Diego and Hill AFB. Hazardous materials packaging and shipping must adhere to IP025 standards, and cybersecurity compliance requires a CMMC Level 2 self-assessment. Documentation for source approval must be submitted with the offer, and any proprietary data must meet the standards outlined in RD004 and RD002. The item is subject to SAE AS9100 non-tailored quality requirements regardless of manufacturer or non-manufacturer status, and all deliveries must include full compliance with MIL-STD-2073-1E preparation protocols and marking specifications. The contract is managed by the Department of Defense under the Land Supplier Operations Vehicle Support organization, with procurement points of contact and delivery timelines aligned to support defense logistics needs through 2026.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339991
New
DIBBS
GASKETThe contract is for the procurement of 30 gaskets with part number 43008 and NSN 5330-01-171-1371, under solicitation SPE7M0-26-T-012Y, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. Delivery is required within five days of award, with the solicitation posted on July 20, 2026, and responses due by July 31, 2026. All supplied items must comply with DLA packaging requirements and technical/quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions. The gasket must be free of asbestos as defined in Fed-Std-313 and must not contain any intentionally added mercury or mercury-containing compounds, except for functional uses in specific applications such as batteries, fluorescent lights, certain instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment boundary for the mercury, per NAVSEA 5100-003D. The item is to be delivered to Bremerton, WA 98314-5001, and the primary point of contact for the contract is Rocio Mino at DLA.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
O-RINGThis contract specifies the procurement of an O-ring with NSN 5331-01-536-3367 and part number 450611 manufactured by Steris Corporation, with a unit of issue of one each and a total quantity of two units. The delivery must be completed within five days of order placement, with delivery terms set at FOB origin, and no variance is permitted in quantity. Inspection and acceptance occur at the destination. Strict packaging requirements are mandated under MIL-STD-2073-1E and DLA packaging standards, including commercial-grade sealed unit containers and exterior shipping containers suitable for safe carrier transport. Marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and all packaging materials must be labeled with special instructions such as "Do Not Bend." Packaging containing wood must be heat-treated or kiln-dried to meet DOD requirements for wood packaging material. The O-ring must be free of intentional mercury or mercury-containing compounds, except for functional uses in batteries, lighting, instruments, sensors, weapon systems, or medical reagents as defined by NAVSEA, with additional containment rules for portable mercury-containing devices. Shipment must be delivered to Chandler, Oklahoma, via traceable freight methods, excluding parcel post, and is designated as an RDD shipment with a required delivery date of July 17, 2026. The contract references technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. All medical procurement standards apply, and the contract is issued under solicitation SPE7L1-26-T-853E.
LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance for Covered Defense InformationThis contract requires the implementation of NIST SP 800-171 security controls to ensure compliance with DFARS cybersecurity requirements for contractor information systems handling covered defense information. The work is scoped to safeguard sensitive unclassified information associated with Department of Defense contracts, mandating the adoption of specific technical, operational, and managerial safeguards outlined in the NIST framework. Performance is to be conducted at a location in Tracy, California, with a zip code of 95304-5000, and the effort is classified as a subcontract under NAICS code 541512 for other computer-related services. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and the contract is managed under the Land Supplier Ops Vehicle Support organization within the Department of Defense. All systems and processes must be configured, assessed, and documented to meet federal cybersecurity standards for protecting controlled unclassified information.
Computer Systems Design Services

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 483111
New
DIBBS
Domestic and International Shipping with U.S.-Flag Vessel ComplianceThis contract requires the transportation of military supplies via sea using U.S.-flag vessels, ensuring full compliance with Domestic and International Shipping regulations under DFARS requirements. All performance must adhere strictly to the statutory mandate that prioritizes U.S.-flag vessels for the movement of Department of Defense cargo, with any exceptions or waivers subject to rigorous justification and approval processes. The work involves managing logistics across both domestic and international maritime routes while maintaining transparency and documentation to meet federal compliance standards. The contract is classified as a subcontract with a NAICS code of 483111, indicating a focus on deep sea, coastal, and great lakes water transportation services. Performance is designated to occur in Tracy, California, with a posting date of July 20, 2026, and a response deadline of July 31, 2026. The procuring activity falls under the Department of Defense’s Land Supplier Operations Vehicle Support office, emphasizing the need for reliable, secure, and legally compliant maritime transport solutions to sustain military supply chains. Failure to comply with U.S.-flag vessel requirements or improperly seeking waivers may result in contract termination or financial penalties.
Deep Sea Freight Transportation

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and SDS ManagementThe contract titled Hazardous Materials Compliance and SDS Management is a subcontract issued by the Department of Defense under the agency name LAND SUPPLIER OPNS VEHICLE SPT, focused on providing regulatory compliance support for hazardous materials. Key responsibilities include drafting and maintaining Safety Data Sheets and implementing a comprehensive hazard communication program in alignment with applicable federal and industry standards. The work is to be performed at a specified location in Tracy, California, with a zip code of 95304-5000, and the solicitation is categorized under NAICS code 541620, indicating it relates to scientific and technical consulting services. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, giving interested parties approximately eleven days to submit proposals. There is no set-aside designation specified, meaning the contract is open to all eligible contractors without preference given to small businesses or other categories. The contract is managed through the DIBBS system with a unique identifier, SPE7L326T123Q, and all submissions must be routed through the designated online portal. While no point of contact is listed, compliance with regulatory frameworks and timely delivery of accurate hazard communication documentation are critical to successful performance under this agreement.
Environmental Consulting Services

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and PreservationThe contract requires compliance with military standards for the packaging and preservation of gaskets, encompassing all aspects of labeling, hazardous materials handling, and adherence to long-term storage requirements. All work must align with applicable defense specifications to ensure the integrity and readiness of components during extended periods of storage and transportation. The scope includes meticulous documentation and procedural adherence to safeguard against degradation, contamination, or misidentification of parts throughout the supply chain. Performance is to be executed at the designated location in Tracy, California, with a response deadline of July 31, 2026. The contract is classified as a subcontract under NAICS code 493190, which pertains to other support activities for transportation. It is sponsored by the Department of Defense under the Land Supplier Operations Vehicle Support office, and full compliance with federal regulations governing defense contracting is mandatory. Interested parties must submit proposals through the official DIBBS portal prior to the deadline to be considered.
Other Warehousing and Storage

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
Manufacturing of Gasket and Preformed Packing SetThe contract seeks the manufacturing of military-specification gaskets and preformed packing sets that must strictly conform to MIL-DTL-117 standards and uphold required shelf-life specifications. These components are critical for maintaining the integrity and operational readiness of defense systems and must be produced to exacting aerospace and defense industry benchmarks. The work is designated as a subcontract under NAICS code 332996, indicating specialized fabrication of other miscellaneous fabricated metal products, and the place of performance is located in Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and is managed under the Department of Defense through the LAND SUPPLIER OPNS VEHICLE SPT organization. The contract does not specify a set-aside classification, suggesting it is open to all eligible subcontractors regardless of business size or status. All submissions must comply with the technical and compliance requirements outlined in the referenced military specification, and performance is expected to meet stringent quality and durability standards to ensure long-term functionality in demanding operational environments. The full details and submission portal are accessible via the provided DIBBS link.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CUI Protection SupportThis contract seeks support for achieving and maintaining compliance with NIST SP 800-171 Revision 2 and the Cybersecurity Maturity Model Certification Level 2 standards for systems that handle Covered Defense Information. The work requires the development and maintenance of System Security Plans, conducting self-assessments against required controls, and ensuring timely cyber incident reporting through the Defense Industrial Base Cybersecurity and Incident Reporting Portal. The contractor must demonstrate proficiency in implementing security measures aligned with these frameworks to protect Controlled Unclassified Information across the defense supply chain. The scope is focused on operational readiness within a defense context, demanding rigorous documentation, continuous monitoring, and adherence to federal cybersecurity mandates. The solicitation is structured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses certified under the SBA’s guidelines are eligible to respond. It falls under NAICS code 541512, indicating the work involves computer systems design services. Performance is anchored in San Diego, California, with a response deadline of July 27, 2026, and the solicitation was posted on July 20, 2026. The contracting activity is managed by the Department of Defense through the Land Supplier Operations Vehicle Support office. Participation requires direct engagement with government cybersecurity expectations and the ability to integrate seamlessly into existing defense infrastructure while meeting strict compliance timelines and reporting protocols.
Computer Systems Design Services

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 424910
New
DIBBS
Defense-Compliant Packaging and Labeling ServicesThe contract requires military-compliant packaging and labeling of gaskets in accordance with MIL-DTL-117 and MIL-STD-2073-1E standards, ensuring full alignment with Department of Defense logistics and traceability protocols. This includes implementing serialization for individual items, generating DFARS Appendix F-compliant packing lists, and integrating all labeled components with the Department of Defense’s Item Unique Identification (IUID) system to maintain end-to-end accountability and inventory accuracy. The work must be performed at the designated place of performance in San Diego, California, with strict adherence to military specification requirements for durability, identification, and documentation. This is a total small business set-aside subcontract under NAICS code 424910, exclusively available to small business concerns as defined by the Small Business Administration. The opportunity was posted on July 20, 2026, with a response deadline of July 27, 2026, and is sourced through the Department of Defense’s Land Supplier Operations Vehicle Support organization. All proposals must demonstrate proven capability in military packaging, serialization, and IUID integration to meet the rigorous standards required for defense logistics, and compliance with all applicable federal acquisition regulations is mandatory.
Farm Supplies Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332996
New
DIBBS
Precision Gasket Manufacturing for Defense ApplicationsA small business subcontract is solicited for the manufacture of a critical safety gasket bearing the national stock number 5330-01-213-7017, to be produced in strict compliance with military specifications. The gasket must adhere to exacting material composition requirements, dimensional tolerances, and performance standards under operational conditions, all guided by approved technical data packages to ensure reliability and safety in defense applications. The contract is set aside entirely for small businesses under the SBA program, with the North American Industry Classification System code 332996 designating it for other miscellaneous fabrication services, reinforcing the requirement for specialized manufacturing capability. The place of performance is designated as San Diego, California, with a response deadline of July 27, 2026, and the solicitation issued under the Defense Logistics Agency’s procurement system, indicating the critical nature of the component for military vehicle systems.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333612
New
DIBBS
LEADSCREW, SCREW JACThis contract pertains to the procurement of a lead screw for a screw jack, identified by part number D2758-01-00 and NSN 3010-01-732-3696, with a quantity of four units required. The item is classified as a critical application item, and while unit identification is not mandated, all delivery and packaging must adhere strictly to DLA and MIL-STD guidelines. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. Palletization follows DLA packaging requirements, and delivery is FOB origin with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and the delivery window is set for 208 days from the contract award, with a firm need ship date of February 25, 2027. The item must not contain any Class I ozone-depleting chemicals, a prohibition that overrides any conflicting specification language, and substitutes require prior approval unless explicitly permitted. The contract is issued under solicitation number SPE7L3-26-T-123T as a total small business set-aside under NAICS code 333612, awarded by the Department of Defense’s Land Supplier Operations Vehicle Support branch. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation or award date depending on acquisition size. The destination for delivery is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation logistics are governed by DLAD procedural notes C19 and C20. The point of contact for the contract is Benita Umoren, reachable via phone and email, and full details including unit of issue conversion are available through official DoD resources. All terms are binding under federal procurement guidelines, with strict adherence to compliance, environmental restrictions, and logistical directives.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332420
New
DIBBS
TANK, PRESSUREThis contract is for the procurement of two pressure tanks identified by NSN 2530-01-598-0344 and manufacturer part number C01V10378, with a total contract value of $2.00 per unit. The delivery must be completed within 244 days from the contract award, with delivery terms set at FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination facility located at Tracy, California, and the packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 standards, including special marking code ZZ for additional requirements and palletization aligned with DLA packaging guidelines. All items must adhere to DLA’s prohibition on Class I ozone-depleting chemicals, requiring approval for any substitute materials even if specifications suggest otherwise. The shipment must be sent to the designated receiving warehouse at 25600 S Chrismann Road, Tracy, CA 95304-5000, with transportation governed by DLAD Procurement Notes C19 and C20. The original required delivery date was October 14, 2026, with a revised need-by date of April 2, 2027. The contract falls under solicitation SPE7L3-26-T-123R, issued under NAICS code 332420 by the Department of Defense’s Land Supplier Operations Vehicle Support office, with primary contact Matthew Curry for inquiries.
Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details