Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SEAL, NONMETALLIC SPECIAL SHAPED SECTION

Awarded
SPE7L1-26-T-772EFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract, awarded on July 17, 2026, to BASIC RUBBER AND PLASTICS CO. (CAGE 6K404) under solicitation SPE7L1-26-T-772E, is a fixed-price award from the Defense Logistics Agency for five units of a nonmetallic special shaped rubber seal, identified by NSN 5330009782070, at a unit price of $140.00, totaling $700.00. Deliveries are required within 20 calendar days after award, with final destination being the Jordan Armed Forces in Amman, Jordan, while inspection and pre-shipment verification occur at the contractor’s facility in Walled Lake, Michigan. The contract mandates strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking and bar-coding, and MIL-DTL-117 for UV-sensitive item encapsulation, requiring medium-duty waterproof, greaseproof, opaque bags. Shipping must follow RP001 DLA packaging standards for palletization. The seal must fully comply with technical specifications and regulatory prohibitions on hazardous substances including hexavalent chromium, ozone-depleting chemicals, and mercury, with all materials properly labeled per FIFRA, FDCA, CPSA, FHSA, FAA, and Hazard Communication Standard, supported by submitted Safety Data Sheets. Electronic invoicing is mandatory through WAWF, and the contractor must follow DFARS 252.232-7003 and 252.232-7006 for payment submission. The contract incorporates multiple FAR and DFARS clauses requiring compliance with cybersecurity standards including NIST SP 800-171 and CMMC Level 2, safeguarding covered defense information and prohibiting use of certain telecommunications equipment. The contractor is subject to inspection and acceptance at origin by the Government, which includes verification of packaging, marking, and technical conformity. The award leverages small business considerations, including HUBZone preferences, and requires representation of size status and UEI/CAGE codes per federal acquisition regulations. Contract modifications must follow 52.243-1 and 252.243-7001, and subcontracting for commercial items falls under 52.244-6 and 252.244-799

General Info

BASIC RUBBER AND PLASTICS CO. to supply nonmetallic seal NSN 5330009782070 for $700, awarded July 17, 2026.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

Contract Value

$700

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Awardee

BASIC RUBBER AND PLASTICS CO.View Profile

Award Issued Date

Documents

(2)

SPE7L1-26-T-772E.pdf

PDF

SPE7L126V120G.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Solicitation

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DLA award SPE7L126V120G posted on DIBBS. Awardee: BASIC RUBBER AND PLASTICS CO. (CAGE 6K404) Total Contract Price: $700.00 Award Date: 07-17-2026 Solicitation: SPE7L1-26-T-772E Line items: - SEAL, NONMETALLIC SPECIAL SHAPED SECTION (NSN/Part 5330009782070, PR 7017318562)

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-904V
The contract pertains to a single gasket item identified by NSN 5330-01-165-1362 with a quantity of one unit, subject to delivery within five days of award. All supplies must be free of asbestos, and any substitutions must comply with Clause L30 and Provision 4 conditions. The item must be marked in accordance with MIL-STD-130N dated November 16, 2012, for identification of U.S. military property, and government identification must be removed from any non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Covered Defense Information may apply, and packaging must meet DLA procurement standards. The solicitation number is SPE7L1-26-T-904V, issued on August 2, 2026, with responses due by August 13, 2026. The place of performance is Beaufort, South Carolina, 29904-6120, and the contract is managed by the Department of Defense’s Land Supply Chain under NAICS code 339991. Primary point of contact is Kristina Derry, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-144G
The contract pertains to the procurement of gaskets with part number 89774 and NSN 5330-00-911-3574, requiring a quantity of 240 units to be delivered within 158 days after award. All supplied items must be completely free of asbestos, and any alternative materials or substitutions must adhere to the approval guidelines specified in Clause L30 and Provision 4. The technical and quality requirements governing this procurement are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment supersedes it. The solicitation number is SPE7L3-26-T-144G, issued on August 2, 2026, with responses due by August 13, 2026. The contracting organization is the Department of Defense, under the Land Supplier Operations Vehicle Support, with performance located in New Cumberland, Pennsylvania, 17070-5002. The primary point of contact is Susan Diamond, reachable via email or phone. The NAICS code associated with this procurement is 339991, and the supplier is Mine Safety Appliances Co located in Pittsburgh, PA.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC RO
Solicitation # SPE7L1-26-U-0535
The contract solicitation SPE7L1-26-U-0535 is for a nonmetallic round seal with NSN 5330014668565, issued under an indefinite-delivery contract structure with a maximum value of $350,000 and a guaranteed minimum of 63 units. The estimated quantity of 426 units is non-binding and subject to issuance of delivery orders. Items must be delivered FOB origin within 97 days of order placement, with no quantity variance permitted. Packaging must adhere to MIL-STD-2073-1E with climate control preservation and dry storage, and all units must be enclosed in a medium-duty, waterproof, greaseproof, opaque bag meeting MIL-DTL-117, Type II, Class C, Style 1, due to UV sensitivity of the item’s classification. Marking must comply with MIL-STD-129, including unit pack code U and no special marking, with palletization following DLA’s RP001 packaging requirements. The use of asbestos is strictly prohibited, and mercury or mercury-containing compounds are banned unless part of specified functional components such as batteries, fluorescent lamps, or instrumentation, which must include a secondary containment barrier per NAVSEA 5100-003D. All hazardous materials must be labeled according to OSHA’s Hazard Communication Standard, with pre-award submission of hazard labels and MSDS required for non-exempt materials. Technical and quality requirements are governed by the DLA Master List, referenced by R or I numbers, and the contract includes extensive federal and defense acquisition regulation compliance, including cybersecurity safeguards, trafficking in persons prohibitions, and restrictions on covered defense telecommunications equipment. The solicitation is set-aside for Women-Owned Small Businesses, and contractors must provide UEI and CAGE codes with accurate socioeconomic representations. Electronic submission via DLA’s eProcurement or DIBBS portal is mandatory by August 17, 2026, with all invoices processed through Wide Area WorkFlow and inspections performed at the delivery point. The contract incorporates clauses for changes, default, accelerated small business payments, safeguarding government information, and prohibition of hexavalent chromium, ensuring comprehensive compliance across logistics, safety, and procurement standards.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-145D
The contract solicitation for GASKET under solicitation number SPE7L3-26-T-145D requires the supply of 27 units identified by NSN 5330-01-720-6786 with a delivery deadline of 5 days after delivery order issuance. All items must be free of asbestos, and any alternative materials must adhere to the approval processes outlined in Clause L30 and Provision 4. The gaskets must be packaged in a medium-duty, waterproof, greaseproof, and opaque bag compliant with MIL-DTL-117, Type II, Class C, Style 1, to protect against UV degradation as specified for Federal Supply Classifications 5330/5331. This packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. The contract references the DLA Master List of Technical and Quality Requirements for all technical and quality specifications identified with R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Compliance with MIL-STD-130N for identification marking of U.S. military property is mandatory, and any government identification on non-accepted supplies must be removed. The contract also indicates that Covered Defense Information may apply, requiring adherence to relevant security protocols. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and performance is to be delivered to Norfolk, Virginia. Point of contact is Lee Miller of the Department of Defense, Land Supplier Operations Vehicle Support.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7LX-26-U-9121
The contract specifies the procurement of 24 gaskets identified by NSN 5330-01-358-8014 under solicitation SPE7LX-26-U-9121, with a total small business set-aside and a NAICS code of 339991. The item is classified as a commercial item and must be free of asbestos, with any alternative materials requiring approval under Clause L30 and Provision 4 conditions. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, involving a medium duty, waterproof, greaseproof, and opaque bag to protect against ultraviolet degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. The gaskets must be marked in accordance with MIL-STD-130N for U.S. military property identification, and government identification must be removed from non-accepted supplies. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Delivery is due within 97 days of award, with the solicitation open for responses until August 17, 2026, and the point of contact is Theodore Misiolek of the Department of Defense’s Strategic Acquisition Program Directorate.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7M1-26-U-4862
This contract specifies the procurement of 2,220 O-rings under NSN 5331-00-291-3272 for the Department of Defense through the Maritime Supply Chain, with a total small business set-aside classification. The product must comply with the Performance Review Institute’s Qualified Products List PRI-QPL-AMS-P-5315 and be manufactured or assembled only by accredited entities listed on the PRI QML or QPL, accessible via eAuditNet.com. All materials must be free of asbestos, and any prior listings containing asbestos are no longer acceptable; substitutions require formal approval under Clause L30 and Provision 4 conditions. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or RFP issue date, unless amended. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed prior to return. The solicitation number is SPE7M1-26-U-4862, with responses due by August 17, 2026, and delivery required within 84 days after contract award. The point of contact is Bryan Fair, reachable at 614-693-0125 or bryan.fair@dla.mil.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-145C
This contract, issued under solicitation number SPE7L3-26-T-145C by the Department of Defense through DLA Land and Maritime, Logistics Supply Operations Vehicle Support, calls for the procurement of two gaskets identified by NSN 5330-01-714-2809 at a unit price of $2.000, totaling $4.000. Delivery is required within 20 days after the order date, with FOB Origin terms and inspection and acceptance occurring at the destination. The item must be packaged and sealed in a medium-duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, to protect against ultraviolet degradation, particularly for direct vendor delivery, foreign military sales, and stock shipments. Packaging and marking must strictly follow MIL-STD-2073-1E and MIL-STD-129, including barcoding on unit and intermediate containers with no special marking required. Palletization adheres to DLA Packaging Requirements for Procurement (RP001), with specific preservation methods coded as Clng/Dry:1 and no additional preservative materials. Hazardous material handling complies with IP025 and 252.223-7001, requiring hazard labels aligned with OSHA’s Hazard Communication Standard, where applicable, and exemption documentation must be submitted prior to award. The contract prohibits the use of parcel post; shipments must be sent via the fastest traceable means to the designated military address at Moody Air Force Base, Georgia. Payment is processed exclusively through Wide Area WorkFlow, with delivery documentation required via WAWF. The contract includes standard FAR and DFARS clauses such as Inspection of Supplies, Changes, Default, Subcontracting, Safeguarding Covered Defense Information, Combating Trafficking in Persons, and Employment Eligibility Verification, all subject to deviation 2026-00038 except where noted. NIST SP 800-171 requirements are mandated for cybersecurity compliance, and the contractor must maintain current SAM registration and provide a valid UEI and CAGE code. Small business status representations are required, with full socioeconomic certifications necessary if claiming small business advantages. Covered defense telecommunications equipment or services are prohibited under 252.204-7018, requiring disclosure of any such components. Contract modifications are priced under 252
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-144L
The contract pertains to the procurement of gaskets identified by NSN 5330-01-597-1378, with a total requirement of 6 units, under purchase request 7017602136, and an additional quantity of 30 units referenced in the context of a broader procurement action. Delivery must be completed within 58 days after award. The item is subject to strict packaging requirements mandating medium duty, waterproof, greaseproof, and opaque packaging in compliance with MIL-DTL-117, Type II, Class C, Style 1, specifically to protect against ultraviolet degradation, and this applies to direct vendor delivery, foreign military sales, and stock shipments. The product must be free of asbestos, with previously approved asbestos-containing codes or part numbers now rejected unless replaced by an approved alternative under Clause L30 and Provision 4 conditions. The gasket is manually excluded from the First Destination Packaging Program and is not eligible for standard commercial packaging. Technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size, and covered defense information provisions may apply. The solicitation, issued under SPE7L3-26-T-144L on August 2, 2026, with a response deadline of August 13, 2026, is managed by the Department of Defense under the Land Supplier Operations Vehicle Support organization, with performance location specified as Albany, Georgia, 31704-1128, and primary point of contact Susan Diamond at dla.flbb1prs@dla.mil or 6146925625.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-905U
The contract pertains to the procurement of a single O-RING with NSN 5331-20-005-6481, required for delivery within 10 days of award under solicitation SPE7L1-26-T-905U. The item must be packaged in a medium duty, waterproof, greaseproof, and opaque bag compliant with MIL-DTL-117, Type II, Class C, Style 1, to protect against UV degradation, and this requirement applies to all delivery types including direct vendor delivery, Foreign Military Sales, and stock shipments. The product must be free of asbestos and any ozone-depleting chemicals, with substitutes needing prior approval unless explicitly authorized by specifications. Supply chain traceability documentation must be retained by the contractor in accordance with DLA Directive Procurement Notes C03 from August 2016, and all government identification must be removed from non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Documentation for source approval requests and controlled defense information may also apply. The purchase is managed by the Department of Defense’s Land Supply Chain, with performance located in Torrance, CA, and primary point of contact Chelsea Cunningham.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-902H
The contract specifies the procurement of four O-rings, part number 671-00007, with NSN 5331-00-456-7963, to be delivered within 20 days of award. These O-rings are preformed packing components and must comply with DLA Packaging Requirements for Procurement, as well as technical and quality standards referenced by R and I numbers from the DLA Master List of Technical and Quality Requirements. Zero-based sampling is required under MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; any unspecified attributes are treated as major. Sampling may follow MIL-STD-105/ASQ Z1.4 for lot sizing, but acceptance must be zero non-conformances unless otherwise directed. The item must contain no asbestos as defined in FED-STD-313 and must not intentionally contain mercury or mercury-containing compounds in direct contact with the hardware, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents. Any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment boundary per NAVSEA 5100-003D. Documentation for source approval must be submitted by Apex Corp Denison Div, Columbus, Ohio. The solicitation number is SPE7L1-26-T-902H, issued on August 2, 2026, with responses due by August 13, 2026, under NAICS code 339991, and the point of contact is Kristina Derry at the Department of Defense, Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-Q-1425
This contract pertains to the procurement of 153 O-rings with NSN 5331-00-850-3743 under solicitation SPE7L1-26-Q-1425, issued by the Department of Defense’s Land Supply Chain. The delivery deadline is set for 84 days after award, and responses must be submitted by August 13, 2026. The item is classified as a primary Qualified Products List (QPL) or Qualified Manufacturers List (QML) item, meaning only suppliers listed on the approved QPL/QML may participate, and strict compliance with Component QPL/QML requirements outlined in Procurement Note H02 is mandatory. All materials must be free of asbestos, and the use of Class I ozone-depleting chemicals is strictly prohibited, superseding any conflicting specification requirements; substitutions require prior approval unless explicitly authorized by the specification. The contractor must retain full supply chain traceability documentation in accordance with DLA Directive Procurement Note C03 from August 2016 and must remove all government identification from non-accepted supplies. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. The place of performance is Tracy, California, 95304-5000, and primary point of contact is Robert Warne at robert.warne@dla.mil or 614-852-6219.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-144Z
The contract pertains to the procurement of a single gasket, identified by NSN 5330-01-715-1881, with a requirement for delivery within 20 days from award. The specification reference includes technical and quality requirements from the DLA Master List of Technical and Quality Requirements, accessed via a publicly available DLA website, with applicable revisions determined by the solicitation issue date for simplified acquisitions. Packaging must comply with DLA packaging standards, and all supplies must be free of asbestos, with any alternative materials subject to approval under Clause L30 and Provision 4 conditions. Government identification must be removed from any non-accepted supplies, and the item must adhere to MIL-STD-130N for identification marking. Covered Defense Information may apply, triggering additional handling and security obligations. The solicitation, issued under number SPE7L3-26-T-144Z on August 2, 2026, with a response deadline of August 13, 2026, falls under NAICS code 339991 and is managed by the Department of Defense's Land Supplier Operations Vehicle Support. Performance is designated for Mechanicsburg, Pennsylvania, with primary point of contact Susan Diamond, reachable via email and phone provided.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 561910
New
DIBBS
Packaging and Shipping of Regulated MaterialsThe contract requires the preparation, packaging, marking, and shipment of a fire nozzle in strict alignment with military and federal standards for regulated materials, ensuring the shipment is accepted at its designated destination. All activities must comply with applicable regulatory requirements to guarantee the safe and lawful transport of the item, with attention to labeling, containment, and documentation as mandated by defense and federal authorities. The work is classified as a subcontract under NAICS code 561910, which pertains to other support activities for transportation, and is issued by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026. The place of performance is specified as Albany, Georgia, with a ZIP code of 31704-0325. While no specific point of contact or set-aside details are provided, the contract is openly available through the DIBBS platform under solicitation number SPE8E626T3955, and interested parties must submit proposals by the stated deadline to be considered for award. The focus remains on ensuring full compliance with defense logistics protocols for the handling and delivery of regulated materials.
Packaging and Labeling Services

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract pertains to regulatory consulting services focused on hazard communication compliance, specifically requiring the preparation of warning labels and safety data sheets (SDS) that meet both OSHA and military standards. This work is critical to ensuring proper handling, storage, and disposal of hazardous materials across defense operations, with all deliverables needing to align with federal safety regulations and Department of Defense requirements. The services will support the Defense Logistics Agency in maintaining stringent compliance for hazardous materials used in military supply chains and facilities. The contract is classified as a subcontract under NAICS code 541690, which covers other scientific and technical consulting services, and is issued by the Department of Defense through the Defense Logistics Agency. Performance is required at a designated location in Albany, Georgia, with a zip code of 31704-0325. The solicitation was posted on August 2, 2026, and responses must be submitted by August 13, 2026. There is no set-aside designation specified, indicating the opportunity is open to all qualified subcontractors regardless of size or status. All work must be completed in accordance with applicable federal regulations, and contractors are expected to demonstrate expertise in hazard communication standards and military-specific documentation protocols.
Other Scientific and Technical Consulting Services

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Fire Equipment Nozzle SupplyThe contract solicits the procurement and delivery of a single military-grade fire equipment nozzle identified by NSN 4210016587880, requiring full compliance with federal packaging, labeling, and hazardous materials handling regulations to ensure safety and regulatory adherence during transport and use. The item is intended for Department of Defense use and must meet the stringent performance and quality standards expected for military applications. The solicitation, issued under a subcontract type by the Defense Logistics Agency, has a posted date of August 2, 2026, with a response deadline of August 13, 2026, and is classified under NAICS code 332999 for other fabricated metal product manufacturing. Performance of the contract is designated for Albany, Georgia, with the zip code 31704-0325 as the specified delivery location. The procurement is part of a broader effort to maintain critical fire suppression capabilities within military infrastructure, and while no set-aside designation is specified, the contract adheres strictly to federal compliance protocols. Interested parties must submit responses by the deadline via the official DIBBS portal linked in the documentation, and all submissions must confirm conformity with the NSN requirements and federal hazardous material standards.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541620
New
DIBBS
Radioactive Materials Notification & ComplianceThe contract requires the screening, documentation, and labeling of radioactive materials that may be present in cutting tools exceeding regulatory thresholds, ensuring full compliance with 10 CFR 20 and Department of Defense standards. This includes identifying any radioactive contamination, maintaining accurate records, and applying appropriate labels to signify the presence of regulated materials, all performed with precision to meet federal and military safety protocols. The work must be carried out in accordance with established procedures to prevent exposure risks and ensure regulatory adherence throughout the handling and reporting process. This subcontract is issued under NAICS code 541620 by the Defense Logistics Agency, a component of the Department of Defense, with performance required at a location in Springfield, ZIP 65803-9513. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026, indicating a tight turnaround for qualified vendors to submit proposals. Although no set-aside type or point of contact is specified, the emphasis on regulatory compliance and precise documentation underscores the critical nature of the task within defense supply chain safety protocols.
Environmental Consulting Services

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
NIST SP 800-171 CUI Compliance SupportThe contract seeks cybersecurity compliance support focused on Controlled Unclassified Information (CUI) in alignment with NIST Special Publication 800-171 requirements. The scope includes conducting a comprehensive assessment of current security controls, developing a System Security Plan that documents policies and procedures for protecting CUI, and preparing a Plan of Action and Milestones to address identified gaps and deficiencies. The work is intended to help the contractor achieve and maintain compliance with federal cybersecurity standards for handling sensitive but unclassified information within a Department of Defense environment. This is a subcontract under the Defense Logistics Agency, with performance expected to occur in Springfield, ZIP 65803-9513. The North American Industry Classification System code is 541512, indicating it involves computer systems design and related services. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026. All deliverables must align with mandatory federal cybersecurity frameworks, and the successful party will be expected to demonstrate expertise in CUI protection, NIST 800-171 implementation, and remediation planning for DoD-related systems.
Computer Systems Design Services

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Defense Logistics Packaging & Labeling ServicesThe contract requires military-compliant packaging, labeling, and palletization of cutting tools in strict accordance with MIL-STD-129 and specific Defense Logistics Agency directives including TCN, DIC, RDD 555, and Project Code TP 2. All work must adhere to the detailed technical and procedural standards set forth by the Department of Defense to ensure uniformity, traceability, and operational readiness across the military supply chain. The performance location is specified as Springfield with a ZIP code of 65803-9513, and the contract is classified as a subcontract under NAICS code 493190. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, and is managed by the Defense Logistics Agency under the Department of Defense. The contract is accessible through the DIBBS platform via the provided URL, and all prospective bidders must ensure full compliance with the military packaging and labeling specifications to meet the agency’s operational requirements. No set-aside type is designated, and the contract remains open to eligible subcontractors capable of meeting the rigorous DLA standards.
Other Warehousing and Storage

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & SDS ManagementThe contract requires comprehensive identification, labeling, and documentation of all hazardous materials used in or associated with cutting tools, ensuring full compliance with regulatory standards. This includes the accurate generation and maintenance of Safety Data Sheets (SDS) that meet required specifications, covering material composition, handling procedures, health and environmental hazards, and emergency response measures. All labeling must align with international and domestic regulations to ensure safe handling, storage, and transportation throughout the supply chain. The subcontract is issued by the Defense Logistics Agency under the Department of Defense, with performance required in Springfield, Missouri, and a response deadline of August 13, 2026. It falls under NAICS code 541690, indicating its focus on other scientific and technical consulting services, specifically relating to regulatory compliance and safety documentation. The solicitation is open to qualified subcontractors capable of delivering precise, auditable SDS records and robust hazardous materials management protocols to support defense-related manufacturing operations.
Other Scientific and Technical Consulting Services

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332710
New
DIBBS
Precision Cutting Tool ManufacturingThe contract requires the manufacture of a precision cutting tool identified by NSN 3455014066836 to meet rigorous military specifications, encompassing exacting standards for materials, dimensional tolerances, and performance under operational conditions. The work must be executed in accordance with defense-grade quality controls to ensure reliability and durability in high-stakes environments, with all components and processes aligned to established military and industrial benchmarks. This subcontract is part of a broader effort by the Defense Logistics Agency, under the Department of Defense, to secure critical tooling for military applications. The opportunity was posted on August 2, 2026, with a response deadline of August 13, 2026, and is classified under NAICS code 332710 for industrial machinery manufacturing. Performance of the contracted work is designated to take place in Springfield, with the zip code 65803-9513 serving as the official place of performance. While no set-aside designation or specific point of contact is provided, interested parties must submit proposals through the designated DIBBS portal linked in the solicitation to be considered for award.
Machine Shops

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 484220
New
DIBBS
Domestic Freight and Delivery LogisticsThe contract under the title Domestic Freight and Delivery Logistics involves the transportation of batteries from the contractor’s designated shipping point to two destination locations: Sacramento, CA and Wadesboro, NC, with all shipments governed by FOB Origin terms, meaning title and risk of loss transfer to the buyer at the point of origin. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, is classified under NAICS code 484220, indicating it pertains to specialized freight trucking services. The solicitation was posted on August 2, 2026, with proposals due by August 13, 2026, and the primary place of performance is listed as Wadesboro, NC, with a zip code of 28170-0000. The contract does not specify a set-aside type or organization type, and no point of contact information is provided in the data. Bidders must ensure compliance with FOB Origin requirements and be prepared to handle logistics to both specified locations under the terms outlined in the solicitation.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
Quality Inspection and Conformance TestingThe contract requires the performance of comprehensive quality inspections for both incoming and outgoing materials adhering strictly to MIL-STD-1916 or ASQ Z1.4 standards, with an absolute mandate for zero non-conformances. This includes systematic sampling procedures and the accurate documentation and reporting of any deviations or failures, ensuring full conformance to defense-grade quality requirements. The work is tied to a subcontract under the Defense Logistics Agency, part of the Department of Defense, with performance specifically located in Wadeboro, North Carolina, zip code 28170-0000. The solicitation, classified under NAICS code 541380, was posted on August 2, 2026, and responses are due by August 13, 2026, with no set-asides indicated. All inspection activities must be executed with precision to meet stringent military standards and maintain supply chain integrity for defense-related applications.
Testing Laboratories and Services

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance for Covered Defense Information (CDI)The contract requires the implementation of cybersecurity controls aligned with NIST SP 800-171 and compliance with DFARS 252.204-7012 to protect Covered Defense Information handled by the contractor. This includes establishing and maintaining a robust security framework to safeguard sensitive data within systems and networks, ensuring all required access controls, audit capabilities, media protection, personnel security, and system integrity measures are fully operational. The contractor must also be prepared to report any cyber incidents affecting Covered Defense Information in accordance with specified timelines and procedures outlined in the regulation. This subcontract is issued under the Department of Defense’s Defense Logistics Agency, with performance required at Wadeboro, North Carolina, under NAICS code 541512 for computer systems design services. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and is open to eligible subcontractors participating in defense-related supply chains. Compliance is mandatory and subject to verification, with failure to meet requirements potentially resulting in contract termination, penalties, or loss of eligibility for future DoD work.
Computer Systems Design Services

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and LabelingThe contract requires comprehensive packaging and labeling of batteries in strict compliance with MIL-STD-2073-1E, including adherence to Special Marking Code 32, which dictates specific identification and handling requirements for military-grade battery components. Additionally, all labeling must satisfy hazard communication standards under 29 CFR 1910.1200 and MIL-STD-129, ensuring accurate depiction of chemical hazards, handling instructions, and standardized barcoding for military logistics systems. This work is classified as a subcontract under NAICS code 493190 and is managed by the Defense Logistics Agency under the Department of Defense, with performance required at the facility located in Wadeboro, North Carolina, 28170-0000. All offerings must be submitted by the response deadline of August 13, 2026, after which no further considerations will be accepted.
Other Warehousing and Storage

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details