Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SEAL, NONMETALLIC SPECI

Active
SPE7L3-26-T-153FFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 572 feet of nonmetallic special shaped section seals under NSN 5330-01-196-2312. The contract requires the items to be manufactured in 800 foot lengths and strictly prohibits the use of asbestos as defined in FED-STD-313. Delivery is required within 168 days after the order is placed, with the place of performance located in Barstow, California. The procurement is subject to specific DLA packaging requirements and technical quality standards outlined in the DLA Master List. Additionally, the contract specifies the removal of government identification from any supplies that are not accepted. This solicitation falls under NAICS code 339991 and is managed by the primary point of contact, Susan Diamond.

General Info

DoD procurement of 572 feet of asbestos-free nonmetallic seals for Barstow, California.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

REC OFFICER 442-295-4148, BARSTOW, CA, 92311-5014, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUSA
Contacts
Susan Diamond
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SEAL,NONMETALLIC SPECIAL SHAPED SECTION
SEAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
EBCO INC
ELK GROVE VILLAGE IL
OSHKOSH WI
ITEM IS MADE IN 800 FT. LENGTHS
NO ASBESTOS AS DEFINED IN FED-STD-313 IS
PERMITTED IN THIS ITEM
ADEQUATE DATA FOR NSN/Part Number: 5330-01-196-2312 Quantity: 572 FT Purchase Request: 7017776186QTY: 572 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE4A6-26-T-26LQ
This solicitation, issued by the ASC Commodities Division of the Department of Defense, is for the procurement of two units of preformed packing under part number 5330-01-043-1258. The contract requires delivery within 482 days after receipt of the order. It mandates strict adherence to DLA technical and quality requirements, including specific packaging standards, configuration change management, and the use of approved sampling methods such as MIL-STD-1916 or ASQ H1331. The agreement includes critical safety and security mandates, such as the application of Covered Defense Information and CMMC Level 2 self-assessment. It strictly prohibits the use of asbestos and the intentional addition of mercury or mercury-containing compounds, with limited exceptions for specific functional components like batteries or sensors. While Item Unique Identification is not required by the service customer, the contractor must comply with all specified measuring, test equipment, and source approval documentation requirements.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L3-26-T-159A
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 33 units of preformed packing under part number 5330-01-652-7618. The contract requires delivery within 168 days after receipt of order and is categorized under NAICS code 339991. Performance is to take place in New Cumberland, Pennsylvania. A critical component of this contract is the strict adherence to export control regulations. The technical data associated with this item is subject to ITAR or EAR restrictions, meaning it cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Department of Commerce. To access this data, contractors must hold an approved US/Canada Joint Certification Program certification, complete specific DOD export-control training, and be approved by the DLA controlling authority.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE4A6-26-T-26HW
This contract is for the procurement of one gasket, identified by NSN 5330-01-381-2551 and Northrop Grumman part number 156C604H01. The item is classified as a commercial product and must be delivered within 20 days. Delivery is FOB Origin, with inspection and acceptance occurring at the destination. The shipment is destined for the US Army in Hohenfels, Germany, and must be sent via the fastest traceable means, excluding parcel post. The contract mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and RP001. Because the item is subject to deterioration from ultraviolet rays, it must be sealed in a medium duty, waterproof, greaseproof, opaque bag per MIL-DTL-117. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331. Additionally, the supplier must ensure that no mercury or mercury-containing compounds are intentionally added to the hardware.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339991
New
DIBBS
GASKET, SPIRAL WOUND
Solicitation # SPE7L3-26-T-224L
This solicitation is for the procurement of 46 spiral wound gaskets, identified by part number M24716TYI53711-5787605-210 and NSN 5330-01-400-2797. The contract is issued by the Department of Defense under the Land Supplier Opns Vehicle Spt agency, with a delivery requirement of 154 days after receipt of order. Performance is located in Tracy, California, and the solicitation is managed by Susan Diamond. The supplier must adhere to strict technical and quality standards, including DLA packaging requirements and MIL-STD-130N for identification marking. Critical material restrictions are in place, explicitly prohibiting the intentional addition of mercury or mercury-containing compounds and requiring all supplied items to be completely free of asbestos. Compliance with the DLA Master List of Technical and Quality Requirements and FAR 52.246-15 certificate of conformance procedures is mandatory.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE4A5-26-T-405H
This solicitation, issued by the Department of Defense ASC Supplier OEM Division, is for the procurement of five O-rings under National Stock Number 5331-00-252-6045. The contract requires delivery within five days after the order is placed. The procurement is governed by NAICS code 339991 and is managed by primary point of contact Patrick Oconnor. The supplier must adhere to specific technical and quality requirements as outlined in the DLA Master List, including strict packaging standards and the removal of government identification from non-accepted supplies. Additionally, the contract mandates that all items be free of asbestos and prohibits the use of Class I ozone-depleting chemicals, requiring any substitute chemicals to be submitted for official approval.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L3-26-T-224F
This contract, identified as solicitation SPE7L3-26-T-224F, is for the procurement of 17 units of preformed packing, specifically NSN 5330-01-034-2802. The items are critical application parts associated with Todd Combustion Inc. The delivery is required within 140 days, with a need ship date of February 2, 2027, to the DLA Distribution San Joaquin facility in Tracy, California. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards under MIL-STD-2073-1E and MIL-STD-129. Due to the potential for deterioration from ultraviolet rays, items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions, and requires compliance with hazardous materials shipping regulations.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SPECI
Solicitation # SPE7L3-26-T-224N
This contract is a solicitation for the procurement of 32 units of nonmetallic special shaped section seals, identified by NSN 5330-01-410-9795. The requirement is issued by the Department of Defense under the Land Supplier Operations Vehicle Support agency, with a delivery timeline of 154 days after the order is placed. The procurement is subject to full and open competition and adheres to specific technical and quality requirements outlined in the DLA Master List. Key compliance mandates include the strict prohibition of asbestos and the requirement for items to be free of government identification if not accepted. Packaging must follow MIL-DTL-117 standards using waterproof, greaseproof, and opaque bags to prevent UV deterioration. Additionally, the items must have at least 85 percent of their stated shelf life remaining upon delivery, specifically requiring 31 months of shelf life at the time of receipt at the government depot. Identification marking must comply with MIL-STD-130N.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, CABLE
Solicitation # SPE7L3-26-T-223Z
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of one cable seal under National Stock Number 5330-01-599-5818. The contract requires delivery within 20 days after the order is placed, with performance located at Fort Hood, Texas. The supplier must adhere to specific technical and quality requirements, including DLA packaging standards and the removal of government identification from any non-accepted supplies. Due to the potential for ultraviolet degradation, the item must be packaged in a medium duty, waterproof, greaseproof, and opaque bag per MIL-DTL-117 specifications. Additionally, all supplied items must be completely free of asbestos.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE4A5-26-T-404V
This solicitation from the Department of Defense, issued by the ASC Supplier Oper OEM Division, is for the procurement of 921 gaskets under part number 5330-00-390-1573. The contract requires delivery within 409 days after the order is placed. Performance is centered in San Diego, California, and the procurement falls under NAICS code 339991. The contract mandates strict adherence to various technical and quality requirements, including CMMC Level 2 cybersecurity assessments and specific DLA packaging and marking standards. Notably, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training. Inspection and acceptance will occur at the origin, and the contract incorporates specific guidelines for configuration change management and the handling of covered defense information.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SP
Solicitation # SPE7M4-26-T-380U
FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-224A
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE4A1-26-T-2734
AVIATION SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 335311
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE7L3-26-T-224R
This contract is a solicitation for the procurement of one wiring harness, identified by NSN 6150-01-658-5196 and Oshkosh Defense part number 4302142. The order is issued by the Department of Defense under solicitation number SPE7L3-26-T-224R with a required delivery date of August 27, 2026. Delivery is required within 20 days after order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The item must be delivered to the Distribution Management Office in Twentynine Palms, California. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards, and shipments must be sent via traceable means rather than parcel post. The contract specifies a zero percent quantity variance and requires palletization in accordance with DLA procurement requirements.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
FRAME, STRUCTURAL, VE
Solicitation # SPE7L3-26-T-224B
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 16 units of structural frames under part number 2510-01-678-1687. The contract requires delivery within 260 days after order and is managed under NAICS code 332999. Performance is designated for Bremerton, Washington, with the primary point of contact being Matthew Curry. Compliance requirements are stringent, including CMMC Level 2 certification for third-party assessment and adherence to DLA master technical and quality requirements. The contract strictly prohibits the use of Class I ozone-depleting chemicals and mandates specific DLA packaging and government identification removal protocols. Furthermore, the project involves technical data subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specialized handling training to access restricted data.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326291
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7L3-26-T-224K
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 74 plain encased seals, identified by NSN 5330-01-112-1527 and part number 3039000 from Cummins Inc. The contract requires that the items contain no asbestos as defined by FED-STD-313 and mandates a delivery timeframe of 5 days after the order is placed. The procurement is subject to DLA packaging requirements and specific technical and quality standards outlined in the DLA Master List. Additionally, the contract includes a requirement for the removal of government identification from any supplies that are not accepted. The place of performance is located in Texarkana, Texas, and the solicitation is categorized under NAICS code 326291.
Rubber Product Manufacturing for Mechanical Use

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333618
New
DIBBS
PUMP, FUEL, ELECTRICAL
Solicitation # SPE7L3-26-T-224J
This contract, identified as SPE7L3-26-T-224J, is for the procurement of one electrical fuel pump, part number 4941173 from Cummins Inc, under NSN 2910-01-595-9022. The delivery is required within five days after order, with a required delivery date of September 8, 2026. The shipment is destined for HQ HSC ASG Kuwait at Camp Arifjan, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging requirements, specifically citing ASTM D3951 and MIL-STD-129 for marking and labeling. Technical and quality requirements are governed by the DLA Master List, and the contract includes a specific provision for the removal of government identification from non-accepted supplies. The procurement is managed by the Department of Defense Land Supplier Operations Vehicle Support.
Other Engine Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
PARTS KIT, AIR FILTE
Solicitation # SPE7L3-26-T-224E
This contract is for the procurement of 30 air filter parts kits, each consisting of one filter element and one housing gasket. The items are designated as critical application items and must adhere to specific technical drawings and quality requirements set by the DLA master list. The contract prohibits the use of Class I ozone depleting chemicals and requires compliance with covered defense information standards. Delivery is set for 140 days after the order, with FOB origin for both inspection and acceptance. Packaging and marking must follow MIL-STD-2073-1 and MIL-STD-129, with final shipment destined for the Military Group in Djibouti. Additionally, the contract includes a first article test requirement to ensure quality and compliance before full delivery.
Other Motor Vehicle Parts Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
LEVER, REMOTE CONTRO
Solicitation # SPE7L3-26-T-166V
This contract is for the procurement of one remote control lever, identified by NSN 3040-00-782-2714. The item must be manufactured according to specific technical drawings and quality standards, including ISO 9001:2015 for manufacturers. A metal casting process is identified for production, and the contract strictly prohibits the use of Class I ozone-depleting chemicals. Delivery is required within 20 days, with the original required delivery date set for May 28, 2026. Shipping is FOB Origin with inspection and acceptance occurring at the destination in Las Cruces, New Mexico. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, and all shipments must be sent via traceable means.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333613
New
DIBBS
BRACKET, EYE, NONROTA
Solicitation # SPE7L3-26-T-224P
This solicitation, identified as SPE7L3-26-T-224P, is issued by the Department of Defense Land Supplier Operations Vehicle Support for the procurement of six non-rotating eye brackets, identified by NSN 3040-01-697-0329. The contract requires delivery within 20 days after receipt of order and is open for full and open competition. Compliance with various technical and quality requirements is mandatory, including DLA packaging standards, the removal of government identification from non-accepted supplies, and adherence to MIL-STD-130N for marking military property. Additionally, the use of Class I ozone-depleting chemicals is strictly prohibited. The contract imposes significant security and regulatory constraints, including requirements for Cybersecurity Maturity Model Certification Level 2 and the protection of covered defense information. Because the item contains technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete specific DOD training to access the data. Quality control measures include inspection and acceptance at the origin and strict configuration change management. The solicitation was posted on September 3, 2026, with a response deadline of September 14, 2026.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details