Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SEAL, NONMETALLIC ST

Active
SPE7L1-26-T-949MFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of four nonmetallic strip seals identified by NSN 5330-01-649-5588 under solicitation SPE7L1-26-T-949M, with a required delivery within five days after order. The item is classified as a commercial item and must be free of asbestos, with any alternative materials requiring approval per Clause L30 and Provision 4 conditions. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the controlling revision determined by the solicitation or award date depending on acquisition size. The item is subject to MIL-STD-130N for identification marking of U.S. military property and covered defense information protocols. The place of performance is Anniston, Alabama, with Kristina Derry as the primary point of contact.

General Info

Procure four nonmetallic strip seals, deliver in five days, asbestos-free, MIL-DTL-117 packaging, Anniston, Alabama.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

7 FRANKFORD AVE, ANNISTON, AL, 36201-5021, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L1-26-T-949M Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SEAL,NONMETALLIC ST
SEAL,NONMETALLIC STRIP
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD002, COVERED DEFENSE INFORMATION APPLIES
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS (NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
"ITEMS SUPPLIED MUST BE FREE OF ASBESTOS.
LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS
ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE
ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE
WITH CLAUSE L30 AND PROVISION 4 CONDITIONS
FOR NSN/Part Number: 5330-01-649-5588 Quantity: 4 EA Purchase Request: 7017784165QTY: 4 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L0-26-Q-0297
The contract is for the supply of 720 units of a gasket identified by NSN 5330-01-207-6449, with a delivery requirement within 120 days after award. The item must be free of asbestos, and any alternative material or substitution must be formally approved under Clause L30 and Provision 4 conditions. Technical and quality standards referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless a subsequent amendment supersedes it. The solicitation number is SPE7L0-26-Q-0297, posted on August 10, 2026, with responses due by August 24, 2026. The contracting activity is under the Department of Defense, specifically the Land Supply Chain ESOC Buys office, with point of contact Kylie Proskurenko reachable via email and phone. The purchase request number is 7017674860, and all supplies must be delivered without any government identification markings if rejected. The procurement is administered through the DIBBS system, with the official solicitation page accessible via the provided URL.
LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7M2-26-Q-0733
This contract pertains to the procurement of a restricted-source item identified by NSN 5330-00-786-5492, with a quantity of 14 units, under solicitation SPE7M2-26-Q-0733. The item requires engineering source approval by the government design control activity and must comply with stringent packaging, documentation, and traceability standards set forth in DLA’s Master List of Technical and Quality Requirements. All supplies must adhere to prohibitions against ozone-depleting chemicals and intentional use of mercury or mercury-containing compounds, except for specific functional applications like batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemically specified reagents approved by NAVSEA; portable mercury-containing items must also meet shock-proof and dual-containment standards per NAVSEA 5100-003D. Item markings must include the contract number, NAWC CAGE code, and part number unless overridden by technical drawings, and all bare items must conform to NAVAIR aircraft launch and recovery equipment traceability requirements. Export-controlled technical data associated with this item is subject to ITAR or EAR regulations, restricting disclosure to foreign persons, including foreign nationals within the U.S., and mandates compliance with DFARS 252.225-7048. Only DLA contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and authorized DLA approval may access this data. Manufacturing and non-manufacturing entities must hold SAE AS9100 accreditation and meet non-destructive testing (NDT) accreditation requirements. Submission of a First Article Testing Report, Production Test and Inspection Report, and Certificate of Quality Compliance is mandatory, with surplus materials deemed unacceptable. Delivery is due 449 days after award, and all technical data and requirements are governed by the solicitation version in effect on the issue date, with updates controlled by any subsequent amendments. The place of performance is San Diego, CA, with Victoria Payne at DLA as the point of contact.
NUCLEAR REACTOR PROGRAM

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7M4-26-T-328M
The contract specifies the procurement of a synthetic rubber gasket with an outside diameter of 5.063 inches, an inside diameter of 1.875 inches, and a thickness of 0.125 inches, classified as a critical item requiring source inspection and compliance with stringent technical and quality standards. The item is defined by a military or consensus non-government standard, and all units manufactured after the solicitation date must conform to the current revision of that standard, with past revisions accepted only for previously manufactured hardware. The gasket must be free of asbestos as defined in Fed-Std-313 and must not contain intentional mercury or mercury compounds except in specific exempted applications such as batteries or instrument sensors, with additional containment requirements for portable devices. It carries a non-extendable 36-month shelf life under Type I Code Q requirements, and each unit must be permanently marked every three feet with the specification number, revision, type, class, and cure or manufacture date in accordance with MIL-STD-190, including approved colors and environmental resistance. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117 Type II Class C Style 1 to protect against UV degradation. Palletization follows DLA packaging requirements, and all markings must include the special code 32 indicating Type I shelf life. The item is subject to inspection and acceptance at destination, with a delivery window of 87 days from the contract award and a required delivery date of December 31, 2026. The contractor must certify material compliance, understand bare item marking requirements, and deliver 215 units FOB origin under a firm fixed price of $215.00 each, totaling $46,225.00. The delivery address is the DLA Distribution New Cumberland Facility, and transportation logistics must adhere to DLAD Procurement Notes C19 and C20. The solicitation number is SPE7M4-26-T-328M, with a response deadline of August 21, 2026, and the item falls under Federal Supply Class 5330 with NSN 5330-01-126-8850.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
RETAINER ASSY
Solicitation # SPE7M4-26-T-329D
The retainer assembly, identified by NSN 5330-00-525-6138 and quantity of 126 units, is solicited under contract SPE7M4-26-T-329D with a response deadline of August 21, 2026, and a required delivery date 95 days after award. This item is classified as a commercial item and strictly prohibits the use of asbestos as defined in FED-STD-313. All technical and quality requirements applicable to this procurement are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Government identification must be removed from non-accepted supplies in accordance with RQ011. The procurement is administered by the Department of Defense’s Fluid Handling Division, with performance located at Tinker AFB, Oklahoma, and primary point of contact Rory O’Reilly at dla.mil. The NAICS code 339991 applies, and the solicitation is issued through the DLA eProcurement portal.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
C-SEAL
Solicitation # SPEFA5-26-Q-0069
The contract specifies the procurement of 21 units of C-SEAL, identified by NSN/part number 5331-LN-003-3716, under solicitation number SPEFA5-26-Q-0069, with a firm fixed price and no variance allowed in quantity. Delivery is required within 30 days after award, with inspection and acceptance occurring at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, and palletization must adhere to DLA’s RP001 packaging requirements, ensuring unit of issue and quantity per unit pack match the contract specifications. The item is to be shipped to the freight address at Fleet Readiness Center DLA in Cherry Point, North Carolina, while the parcel post address is for administrative use. The required delivery date is February 26, 2027, associated with purchase request 7017339509. The contract emphasizes adherence to all DLA Master List of Technical and Quality Requirements, which supersede ANSI standards where applicable. The solicitation was posted on August 10, 2026, with responses due by August 17, 2026, and the point of contact is Tanya Whitney, reachable via email and phone provided.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SP
Solicitation # SPE7L1-26-T-947T
The contract is for two nonmetallic seals identified by NSN 5330-01-692-9075 under solicitation SPE7L1-26-T-947T, with a required delivery within 20 days of award. The item is classified as a commercial item and must be free of asbestos, with any alternative materials requiring approval under Clause L30 and Provision 4 conditions. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. The item must also be marked in accordance with MIL-STD-130N for U.S. military property identification, and government identification must be removed from non-accepted supplies. Covered defense information potentially applies, and packaging and handling must adhere to DLA packaging standards. The solicitation was posted on August 10, 2026, with responses due by August 21, 2026, and performance is due at Davis Monthan AFB, Arizona, under the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SP
Solicitation # SPE7M4-26-T-328P
This contract specifies the procurement of a nonmetallic special shaped seal, identified by NSN 5330005365225 and part number 3-69002-1, manufactured under requirements applicable to critical applications as defined by The Boeing Company and BASIC RUBBER AND PLASTICS CO. The item is classified as a Type I (Code U) shelf-life item with a strict non-extendable shelf life of 96 months. No asbestos is permitted per Fed-Std-313, and all packaging must comply with MIL-STD-2073-1E and MIL-DTL-117 Type II Class C Style 1, which mandates medium duty, waterproof, greaseproof, opaque sealing to protect against UV deterioration. Packaging and marking must adhere to MIL-STD-129 and DLA Packaging Requirements, including specific codes for preservation, cushioning, and unit containment, with palletization governed by RP001. The seal is subject to inspection and acceptance at destination, with zero variance allowed in quantity. Delivery is required within 200 days from award, FOB origin, to the DLA Distribution Depot at Tinker AFB, Oklahoma, with a required ship date of July 28, 2026, and original delivery date of June 3, 2027. All technical and quality specifications referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions tied to the solicitation issue or award date based on acquisition type. The item is to be shipped under Federal Supply Classifications 5330/5331, and transportation and handling follow DLAD Proc Notes C19 and C20.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-948L
The contract pertains to the procurement of 435 O-RINGS with NSN/Part Number 5331-01-170-9114 under solicitation SPE7L1-26-T-948L, issued by the Department of Defense’s Land Supply Chain. Deliveries are required within 164 days after order, and responses must be submitted by August 21, 2026. All supplies must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition type and solicitation amendments. The items must be free of asbestos and any use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification requirements; alternative materials require prior approval. Packaging must adhere to DLA standards, and government identification must be removed from non-accepted supplies. Documentation for source approval requests must follow RC001 guidelines, and covered defense information provisions apply. The place of performance is Tracy, California, with Kristie Fown as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-948G
Offerors must submit quotations for O-rings under solicitation SPE7L1-26-T-948G, specifying manufacturer, CAGE code, item name, service identification, and test number, while ensuring compliance with FAR 52.209-1 and excluding covered telecommunications equipment or services in accordance with FAR 52.204-24 and DFARS 252.204-7016. Domestic material restrictions under the Berry Amendment, Buy American Act, and related DFARS clauses apply, requiring full disclosure of non-domestic components if applicable, with the Berry Amendment threshold now at $150,000. Small business joint ventures must provide representations under FAR 52.212-3 and 52.219-1 for eligibility in designated categories. Due to fluctuating demand, offerors are strongly advised to quote quantity ranges to facilitate award flexibility without administrative delays, though this does not apply to Auto IDC. All vendors must register via DLA’s AMPS system within two months to access the Vendor Shipment Module and maintain shipping capability, with Web Services users required to update their schema per DIBBS notifications issued in April 2025. Additive manufacturing is prohibited unless specifically approved by the contracting officer, and offers containing AM-produced items will be deemed non-compliant. Fast Pay is not available for this solicitation. Offerors unable to respond by the closing date must submit a “No Bid” on DIBBS with an anticipated quote date or reason to avoid assumption of non-procurability. APEX Accelerators offer free assistance to enhance government contracting capability. The item is for 114 units with a total PR quantity of 477, delivery due in 97 days, and performance is at Robins AFB, Georgia.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
PACKING WITH RETAINER
Solicitation # SPE7L1-26-T-947R
The contract is for a packing with retainer item identified by NSN 5330-01-066-9423 and part number 5267, supplied by Thomas and Betts Corp under the solicitation SPE7L1-26-T-947R. The requirement specifies one unit to be delivered within five days of award, with strict adherence to Federal standards prohibiting any asbestos as defined in Fed-Std-313. The packaging and manufacturing must comply with DLA’s master list of technical and quality requirements, with revisions controlled by the solicitation issuance or award date depending on the acquisition size. The item falls under NAICS code 339991 and is procured by the Department of Defense’s Land Supply Chain under a federal solicitation with no set-aside designation. All government identification must be removed from non-accepted supplies. The place of performance is Solomon(s), MD 20688-0054, and the primary point of contact is Kristina Derry, reachable via email and phone provided. The solicitation was posted on August 10, 2026, with responses due by August 21, 2026.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
PARTS KIT, DEHYDRATOR
Solicitation # SPE8E9-26-Q-0670
This contract is for a Parts Kit, Dehydrator, consisting of ten O-rings and one backup ring, intended for overhauling a dehydrator tower used in equipment supplied by Air-Dry Corp. of America, specifically for part numbers 10278-12L or 10278-12R. Two kits are required per dehydrator unit, and the total procurement quantity is 44,000 kits under NSN 4440-01-202-2080. Delivery must be completed within 60 days of award. The solicitation number is SPE8E9-26-Q-0670, issued on August 10, 2026, with responses due by August 17, 2026. The contract incorporates DLA packaging requirements and references the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except in specific exempted applications such as batteries, fluorescent lights, sensors, or weapons as defined by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment barrier. The contract is subject to Covered Defense Information provisions and mandates removal of government identification from non-accepted supplies. The purchasing agency is the Department of Defense under the Construction & Equipment MRO_svc I, with Tracey Marcus designated as the primary point of contact.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-948E
The contract entails the procurement of a single gasket identified by NSN 5330-01-687-9713, with a delivery requirement of 10 days after award. The item must be packaged and sealed in a medium duty, waterproof, greaseproof, and opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, to protect against ultraviolet degradation, especially since the Federal Supply Classifications 5330/5331 are susceptible to UV damage. This packaging standard applies to direct vendor delivery, foreign military sales, and stock shipments. The gasket must be free of asbestos, and any substitution must comply with Clause L30 and Provision 4 conditions. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The solicitation number is SPE7L1-26-T-948E, issued on August 10, 2026, with responses due by August 21, 2026, under NAICS code 339991, and is managed by the Department of Defense’s Land Supply Chain through Kristina Derry as the point of contact.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332999
New
DIBBS
AIR SPRING, VEHICULA
Solicitation # SPE7L1-26-T-948X
The contract specifies the procurement of one air spring for vehicle use with NSN 2510-01-732-1241 and part number 1R12-607 manufactured by Goodyear Tire & Rubber Company, under solicitation SPE7L1-26-T-948X. Delivery is required within 20 days from the contract award, FOB origin, with zero variance allowed in quantity and inspection and acceptance occurring at the destination. All supplies must comply with DLA's Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951, and packaging must follow MIL-STD-129 and RP001 DLA Packaging Requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by specification. Packaging shall be palletized per DLA guidelines and labeled appropriately with the correct Unit of Issue and Quantity per Unit Pack. The shipment is to be delivered via the fastest traceable freight method, not parcel post, to the specified Navy Expeditionary Logistics Support Group address in Williamsburg, VA, with an original required delivery date of August 7, 2026. Government use codes and shipping identifiers are provided for internal tracking and logistics coordination.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332710
New
DIBBS
SHAFT, STRAIGHT
Solicitation # SPE7L1-26-Q-1477
The contract pertains to the procurement of three straight shafts identified by NSN 3040-01-658-3106 under solicitation SPE7L1-26-Q-1477, with a delivery requirement of 173 days after award. The solicitation is open for full and open competition and is managed by the Department of Defense’s Land Supply Chain under the Defense Logistics Agency. The item is subject to rigorous quality and cybersecurity requirements, including mandatory CMMC Level 2 certification for any third-party assessors involved, and adherence to DLA’s technical and quality standards referenced through R and I numbers from the DLA Master List. The contract enforces strict configuration change management, quality conformance inspections, and inspection and acceptance at origin, with all suppliers required to comply with DLA packaging standards and the removal of government identification from non-accepted items. Technical data associated with the item is export-controlled under ITAR or EAR, necessitating compliance with DFARS 252.225-7048 and restricting access to contractors approved under the US/Canada Joint Certification Program who have completed required DLA export control training and questionnaires. Covered defense information protocols apply, and all measuring and test equipment must meet specified standards. The point of contact is Mary Miller, with responses due by August 21, 2026, and performance to occur at Anniston, Alabama, with a posted date of August 10, 2026.
Machine Shops

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333120
New
DIBBS
TRACK SHOE ASSEMBLY
Solicitation # SPE7L1-26-T-947X
The contract is for the procurement of two Track Shoe Assemblies, identified by NSN 2530-01-314-6415 and part numbers 3P1027 from CATERPILLAR INC and 53778 from INTERTRACTOR AMERICA CORP, with a total quantity of two units. Delivery is required within five days of award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using wooden crates of overseas type capable of handling over 3200 lbs, constructed to MIL-C-104 or ASTM D6039 standards. Corrosion protection, grease-proof wrapping, and moisture control measures are mandatory for all containers. The items are designated as critical application components and must be marked with the center of balance code 14. All packaging, marking, and shipping must adhere to DLA procurement requirements and the DLA Master List of Technical and Quality Requirements referenced in the document. Shipment must be sent via traceable means, excluding parcel post, to the designated military facility in Little Falls, MN. The freight and marking addresses are identical, and the shipment is classified as RDD with no NMCS designation. The contract is issued under solicitation SPE7L1-26-T-947X, with a required delivery date of August 7, 2026, and is managed by the Department of Defense’s Land Supply Chain. The primary point of contact is Kristina Derry, and the National Industrial Security Program Code is 333120. The contract is subject to DoD unit of issue standards and federal procurement protocols, with all documentation and compliance requirements binding on the supplier.
Construction Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333310
New
DIBBS
BRACKET, VEHICULAR C
Solicitation # SPE7L1-26-T-948Y
The contract pertains to the procurement of one unit of BRACKET, VEHICULAR C with NSN 2590-01-680-6104, issued under solicitation SPE7L1-26-T-948Y with a response deadline of August 21, 2026, and a required delivery within 20 days after order. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must conform to DLA standards, and non-accepted supplies must have all government identification removed prior to return. The item involves technical data subject to export control under either ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Department of Commerce; this restriction extends to foreign nationals within the U.S. and foreign subsidiaries of U.S. companies, with DFARS 252.225-7048 governing compliance. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and approved DLA questionnaire responses. The procurement is open to full competition under NAICS code 333310, with performance required at Fort Riley, Kansas, 66442-0000, and primary point of contact is Kristina Derry via email and phone provided.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
CAP, PROTECTIVE, DUST AN
Solicitation # SPE7L1-26-T-948Q
The item is a protective cap designed to seal against dust and moisture, identified by NSN 5340-01-621-3762, with a total procurement quantity of 2,739 units under purchase request 7017775079. The contract solicitation, numbered SPE7L1-26-T-948Q, was posted on August 10, 2026, with responses due by August 21, 2026, and delivery is required within 197 days after award. The product falls under NAICS code 335931 and is being procured by the Department of Defense through the Land Supply Chain, with performance occurring at Cherry Point, North Carolina, 28533-5040. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and specific regulations apply including packaging Standards, removal of government identification from non-accepted supplies, and export control of technical data. The technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Commerce. All contractors must be certified under the US/Canada Joint Certification Program, have completed approved DOD training on handling export-controlled technical data, and have received explicit approval from DLA to access such data. DFARS 252.225-7048 applies to all technical data handling, and distribution is strictly limited to approved U.S.-based contractors. The primary point of contact for the solicitation is Isabelle Szulewska, reachable via email and phone provided, and all relevant documents and training materials are accessible through the DLA eProcurement website.
Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L1-26-Q-1483
The contract pertains to the procurement of 14 units of an item identified by NSN 0001S00000053 under solicitation SPE7L1-26-Q-1483, with a delivery deadline of 153 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date or award date depending on acquisition size. The item is classified as a small arms weapon or part, subject to demilitarization requirements under Category I of the Munitions List. Cybersecurity Compliance is mandatory at CMMC Level 2, assessed by a certified third-party organization. The contractor must adhere to DLA packaging standards and tailored higher-level quality requirements, including configuration change management, inspection and acceptance at origin, and removal of government identification from non-accepted items. Physical identification of the bare item must conform to specified marking protocols. All technical data associated with the item is subject to export control under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, whether in the U.S. or abroad, and is restricted to contractors with approved JCP certification, completed DOD export control training, and DLA-approved access. The place of performance is San Diego, CA, with Deborah Ferrin as the primary point of contact, and responses are due by August 20, 2026.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
STOP, TRACK
Solicitation # SPE7L1-26-T-947Y
This contract under solicitation SPE7L1-26-T-947Y requires the delivery of eight units of item NSN 5340-01-698-0256, identified as SIKORSKY AIRCRAFT CORPORATION P/N 78204-02557-108, at a unit price of $8.00 for a total value of $64.00. Delivery is due within 20 days of contract award with FOB origin terms and zero variance allowed in quantity. All items must comply strictly with DLA’s Master List of Technical and Quality Requirements, which override any conflicting specifications, and must be marked in accordance with MIL-STD-130N for military property identification. Packaging must adhere to MIL-STD-129 labeling and RP001 DLA packaging standards, with hazardous materials regulated by TQ requirement IP025 per FED-STD-313 and non-hazardous items conforming to ASTM D3951, unless superseded by DLA requirements. The use of Class I ozone-depleting chemicals is explicitly prohibited, and any substitute chemicals require prior approval unless already authorized by specification. Shipment must be made via the fastest traceable freight method and not parcel post, addressed to Davis Monthan AFB, Arizona, with the RDD code 777 and designated freight contact information. The required delivery date is August 6, 2026, and the items are subject to inspection and acceptance at destination.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
LEVER AND SHAFT, BOM
Solicitation # SPE7L1-26-Q-1476
The item being procured is a lever and shaft component identified as a critical gun part with unique and stringent requirements, classified as a defense article under the International Traffic in Arms Regulations and the Arms Export Control Act. Any manufacturer or exporter must be registered with the Directorate of Defense Trade Controls, and failure to provide proof of registration upon request will render an offer ineligible. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The solicitation mandates two exhibits: one fully assembled and coated unit and one machined but unassembled and uncoated unit. Government Furnished Artillery Testing applies, and offerors may be contacted post-quote to address pricing for this requirement. The NSN is 1095-00-233-2047 with a quantity of four units required, and delivery is due within 281 days after delivery order. The contract is managed by the Department of Defense through the Land Supply Chain, with the place of performance designated as Hill AFB, Utah. The solicitation number is SPE7L1-26-Q-1476, issued on August 10, 2026, with responses due by August 20, 2026, and the primary point of contact is Zane Zwayer, reachable via email and phone provided.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
BREATHER
Solicitation # SPE7L1-26-T-949F
This contract, under solicitation number SPE7L1-26-T-949F, is for the procurement of one unit of a critical application item, ZF FRIEDRICHSHAFEN AG P/N 0501 218 540, identified by NSN 2520-14-574-0622. Delivery is required within 20 days of award, with FOB origin terms and inspection and acceptance occurring at the destination, the Navy Expeditionary Logistics Support Group in Williamsburg, Virginia. Packaging must adhere strictly to DLA Master List requirements, superseding ASTM D3951, and must comply with MIL-STD-129 for marking and labeling. If the item is hazardous per FED-STD-313, it must be packaged under TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable, though subject to higher-priority DLA standards. Palletization must follow RP001, and all packaging must reflect the specified Unit of Issue and Quantity per Unit Pack. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Item Unique Identification is waived per customer request, and the unit of issue is each. Shipment must be sent via the fastest traceable means and is expressly prohibited from using parcel post. The required delivery date is August 7, 2026, with no variance allowed in quantity. Government use codes and shipping identifiers are provided for internal logistics tracking and accountability.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-T-948A
The contract pertains to the procurement of three mounting brackets identified by NSN 5340-01-714-5611 under solicitation SPE7L1-26-T-948A, with a required delivery within five days of award. The item is governed by strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and the cited source-controlled drawing must be fully complied with; only approved sources listed on the drawing are initially recognized, though additional qualified sources may exist. Offerors seeking future qualification must contact the cognizant design activity specified on the drawing. Cybersecurity compliance is mandated at CMMC Level 2 for third-party assessors, and the contract enforces prohibitions on ozone-depleting chemicals, requiring approval for any substitute chemicals. Export control provisions under ITAR or EAR apply to associated technical data, with access restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and questionnaire, and have received explicit approval from DLA. All technical data handling must adhere to DFARS 252.225-7048, including restrictions on disclosure to foreign persons regardless of location. Government identification must be removed from non-accepted supplies, and configuration changes require formal engineering change proposals or variance requests. The solicitation issued on August 10, 2026, with responses due by August 21, 2026, is managed by the Department of Defense’s Land Supply Chain through the DLA, with performance location in Suffolk, Virginia, and primary point of contact provided.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, STRAIGHT
Solicitation # SPE7L1-26-T-947Z
The contract is for the procurement of two straight shafts with NSN/part number 3040-01-485-8075, under solicitation number SPE7L1-26-T-947Z, issued by the Department of Defense’s Land Supply Chain. Delivery is required within five days after contract award, and responses must be submitted by August 21, 2026. The solicitation is a full and open competition with no set-aside classification and falls under NAICS code 333613. Contractors must comply with stringent technical and quality requirements as referenced in the DLA Master List of Technical and Quality Requirements, and must adhere to all applicable DLA packaging, configuration change management, and export control regulations. The item involves technical data subject to ITAR or EAR export controls, restricting access to contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DLA training on handling export-controlled data, and have received explicit authorization from the DLA. Ozone-depleting chemicals are strictly prohibited in any component or process, and substitutions require prior approval. Additionally, all covered defense information must be handled in accordance with applicable cybersecurity protocols, and contractors must be CMMC Level 2 certified third-party assessment organizations. The point of contact for inquiries is Kristina Derry, with delivery performance required in Suffolk, Virginia, 23435-5000.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details