Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SEAL, PLAIN

Active
SPE7L3-26-T-209CFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation is for the procurement of 22 plain seals under National Stock Number 5330-01-663-6984 for the Department of Defense, specifically the Land Supplier Opns Vehicle Spt. The contract requires delivery within 109 days after the order is placed. The procurement is categorized under NAICS code 339991 and is managed by the primary point of contact, Susan Diamond. The agreement is subject to several technical and quality requirements, including DLA packaging standards and tailored higher level quality requirements for both manufacturers and non-manufacturers. A critical mandate of this contract is that all supplied items must be entirely free of asbestos, and any alternative materials must be approved according to specific regulatory clauses. Additionally, the contract may be subject to regulations regarding covered defense information.

General Info

DoD procurement of 22 asbestos-free seals for Land Supplier Opns Vehicle Spt.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE7L3-26-T-209C.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUSA
Contacts
Susan Diamond
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SEAL,PLAIN
SEAL,PLAIN
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
"ITEMS SUPPLIED MUST BE FREE OF ASBESTOS.
LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS
ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE
ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE
WITH CLAUSE L30 AND PROVISION 4 CONDITIONS
FOR NSN/Part Number: 5330-01-663-6984 Quantity: 22 EA Purchase Request: 7018067406QTY: 22 Delivery: 109 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE4A6-26-T-23JH
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 64 gaskets, identified by NSN 5330-01-686-8781. The contract requires delivery within 364 days after order and specifies that all supplied items must be free of asbestos. Performance is based in Tracy, California, under NAICS code 339991. The contract mandates strict adherence to DLA technical and quality requirements, including ISO 9001:2015 standards and specific packaging guidelines to prevent ultraviolet ray deterioration using opaque, waterproof bags per MIL-DTL-117. While Item Unique Identification is not required, the supplier must follow MIL-STD-130N for marking. Additionally, an alternate sampling plan from Sikorsky Corporation is acceptable provided it meets or exceeds ASQ H1331 or MIL-STD-1916 standards.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
GASKET AND SEAL SET
Solicitation # SPE7L3-26-T-207J
This contract is for the procurement of 180 gasket and seal sets, identified by NSN 5330009307861 and part number 5703123 from The W.W. Williams Company, LLC. The acquisition is a total small business set-aside under NAICS code 339991 for the Department of Defense, specifically the Land Supplier Opns Vehicle Spt. Delivery is required within 147 days, with a required delivery date of February 3, 2027, shipping FOB Origin to DLA Distribution Anniston in Alabama. The items must be free of asbestos as defined in FED-STD-313 and must adhere to strict packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Due to the potential for deterioration from ultraviolet rays, the items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. The contract also incorporates specific DLA technical and quality requirements, including RP001 for packaging and RQ011 for the removal of government identification from non-accepted supplies.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-210Q
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 376 gaskets under part number 23017889 and NSN 5330-01-216-4013. The items must be manufactured by General Motors Corp and strictly adhere to the requirement that no asbestos, as defined in FED-STD-313, is permitted in the product. Delivery is required within 164 days after the order is placed. The contract is governed by DLA packaging requirements and technical quality standards as specified in the DLA Master List. The place of performance is located in New Cumberland, Pennsylvania. Interested parties must respond by the deadline of September 8, 2026, in accordance with solicitation number SPE7L3-26-T-210Q.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-03E4
This solicitation is for the procurement of 12 O-rings under contract number SPE7L1-26-T-03E4 for the Department of Defense Land Supply Chain. The items must be delivered within 20 days after the order is placed. All supplied materials must be completely free of asbestos, and any alternative materials require specific approval. The contract mandates strict adherence to technical and quality requirements, including the use of Qualified Products Lists or Qualified Manufacturers Lists. Products must be manufactured by accredited entities as listed by the Performance Review Institute. Additionally, the contractor is required to maintain supply chain traceability documentation and comply with DLA packaging requirements and regulations regarding the removal of government identification from non-accepted supplies.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SP
Solicitation # SPE4A1-26-T-2577
Solicitation SPE4A1-26-T-2577 is a request for quotations issued by DLA Aviation for the procurement of four nonmetallic special shaped section seals, identified by NSN 5330-01-529-6802 and Sikorsky part number 70209-52426-131. The items are designated as critical application items and must be delivered FOB Origin to the Central Receiving and Shipping Point at Fort Rucker, Alabama, with a required delivery date of August 7, 2026. The procurement requires strict adherence to supply chain traceability documentation per DLA Directive C03 and prohibits the use of asbestos. Technical requirements specify a maximum shelf life of 12 months in accordance with ASTM D6576. Due to the potential for deterioration from ultraviolet rays, the seals must be packaged in medium-duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1, and marked according to MIL-STD-129. Inspection and acceptance will occur at the destination. The contractor must utilize the Wide Area WorkFlow (WAWF) system for all payment requests and receiving reports. Quotations are to be submitted electronically via the DLA Internet Bid Board System (DIBBS) by August 21, 2026.
AVIATION SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 1 day
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7LX-26-U-9464
This solicitation, issued by DLA Land and Maritime Strategic Acquisition Program Directorate under number SPE7LX-26-U-9464, is a Request for Quotations for an Indefinite Delivery Contract for plain encased seals (NSN 5330-01-614-9289). The procurement is a total small business set-aside with an estimated annual quantity of 59 units and a contract maximum value of $350,000. The contract is structured as a fixed-price, indefinite-quantity agreement, and the government may utilize a HUBZone price evaluation preference for award. Offerors must submit quotations by August 25, 2026, and the government will not evaluate offers that utilize additive manufacturing processes unless specifically authorized. The technical requirements mandate strict packaging and marking standards to prevent UV-induced deterioration of the items. Specifically, the seals must be packaged and sealed in a medium-duty, waterproof, greaseproof, and opaque bag in accordance with MIL-DTL-117, Type II, Class C, Style 1. This requirement applies to direct vendor delivery, foreign military sales, and stock shipments. Marking must comply with MIL-STD-129, and palletization must follow DLA packaging requirements. Delivery is required within 71 days after receipt of order (ADO) with inspection and acceptance occurring at the destination. Compliance with various federal regulations is required, including the Buy American Act, cybersecurity safeguarding of covered defense information, and strict prohibitions regarding hazardous materials and human trafficking. Invoicing and payment must be processed electronically through the Wide Area Workflow (WAWF) system.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 1 day
View Details
NAICS: 339991
New
DIBBS
O-RING SET
Solicitation # SPE7L1-26-T-03P9
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of two O-ring sets under National Stock Number 5331-01-598-3315. The contract requires adherence to specific DLA packaging and technical quality requirements, including the removal of government identification from any non-accepted supplies. The delivery timeline is set for 134 days after order, with the place of performance located in New Cumberland, Pennsylvania. This federal opportunity is categorized under NAICS code 339991, and interested parties must respond by September 8, 2026.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L1-26-T-03D8
This solicitation from the Department of Defense Land Supply Chain is for the procurement of two preformed packing units under NSN 5330-01-701-7426. The contract requires delivery within 20 days after receipt of order. All supplied items must be completely free of asbestos, and any alternative materials must be approved according to specific contractual clauses. The items must adhere to strict packaging and marking standards, including MIL-STD-130N for identification and MIL-DTL-117 for waterproof, greaseproof, and opaque bagging to prevent deterioration from ultraviolet rays. The agreement incorporates several technical and quality requirements, including DLA packaging standards and regulations regarding the removal of government identification from non-accepted supplies.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, PACKING
Solicitation # SPE7M4-26-T-329R
The contract pertains to the procurement of 1,758 units of RETAINER, PACKING with NSN 5330-00-419-2969 under solicitation SPE7M4-26-T-329R, issued by the Department of Defense’s Fluid Handling Division. The item is classified as a commercial item and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The retainer must be manufactured to the current revision of its governing part standard, and prior iterations of the standard are acceptable for historically produced hardware, but all new production must adhere to the latest standard. The item is subject to stringent material restrictions: no asbestos as defined in FED-STD-313 is permitted, and mercury or mercury-containing compounds must not be intentionally added or come in direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. The supplies must be delivered within 63 days of award to Tracy, California, with a response deadline of August 21, 2026, and the procurement is fully competitive under a federal specification. Point of contact for inquiries is Freddie Vazquez at the provided email and phone number.
FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

in 1 day
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7L1-26-T-931U
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of 18 plain seals under National Stock Number 5330-15-111-0432. The contract is classified as a commercial item acquisition with a delivery requirement of 168 days after order. The primary point of contact for this request is Katherine Woods, and the place of performance is located in Albany. The supplier must adhere to strict technical and quality requirements, including MIL-STD-130N for identification marking and MIL-DTL-117 for packaging. Specifically, the items must be sealed in medium duty, waterproof, greaseproof, and opaque bags to prevent deterioration from ultraviolet rays. Additionally, all supplied items must be completely free of asbestos, and any alternative materials must receive prior approval.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 1 day
View Details
NAICS: 339991
New
DIBBS
PARTS KIT, SEAL REPLACE
Solicitation # SPE7L3-26-T-207Q
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of four seal replacement parts kits for mechanical equipment under National Stock Number 5330-01-616-4532. The contract requires delivery within 146 days after the order is placed and specifies that the items must be packaged in medium duty, waterproof, greaseproof, and opaque bags per MIL-DTL-117 standards to prevent deterioration from ultraviolet rays. The procurement is governed by DLA packaging and quality requirements, specifically referencing RP001, RA001, and RQ011 regarding the removal of government identification from non-accepted supplies. The solicitation is categorized under NAICS code 339991, with the place of performance located in Albany, Georgia. Interested parties must respond by September 8, 2026.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
FELT, MECHANICAL, PREFOR
Solicitation # SPE7L3-26-T-208C
This contract is for the procurement of nine units of preformed mechanical felt, identified by part number K96-0006 from Ward Leonard Electric Co, Inc and NSN 5330-01-219-7243. The order is managed under solicitation SPE7L3-26-T-208C with a required delivery date of January 14, 2027, and a delivery window of 127 days. Shipping is FOB Origin and the destination is DLA Distribution San Joaquin in Tracy, California. The agreement includes strict environmental and quality mandates, specifically prohibiting the use of Class I ozone-depleting chemicals and the intentional addition of mercury. Due to the risk of ultraviolet degradation, the items must be sealed in medium-duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 standards. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and the contract incorporates various DLA technical and quality requirements including those for hazardous materials and covered defense information.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 333618
New
DIBBS
Supply of CUMMINS Cooling System Pump (P/N 6456335)
Other Engine Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
Supply of Preformed Packing (NSN: 5330014399767)This subcontract with the Department of Defense, specifically the Land Supplier Opns Vehicle Spt agency, requires the manufacture, packaging, and delivery of 18 units of preformed packing under NSN 5330014399767. All deliverables must strictly adhere to military packaging and quality standards. The work is categorized under NAICS code 332999 and is to be performed in New Cumberland, Pennsylvania. The solicitation was posted on August 26, 2026, with a response deadline of August 28, 2026. Interested parties must ensure all requirements are met by the specified cutoff date to be considered for this supply contract.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 1 day
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging and Labeling Services
Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326220
New
DIBBS
Precision Rubber Sealing Components (O-Rings)
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333911
New
DIBBS
Supply of Hydraulic Pump (NSN 2910013633087)This subcontract involves the procurement and delivery of a commercial hydraulic pump identified by NSN 2910013633087 for the Department of Defense, specifically the Land Supplier Opns Vehicle Spt agency. The scope of work encompasses the full manufacturing process, including packaging, labeling, and shipping, all of which must strictly adhere to DLA and federal requirements. The opportunity is categorized under NAICS code 333911 and is designated as a Total Small Business Set-Aside in accordance with FAR 19.5. Interested parties must submit their responses by August 28, 2026, following the posting date of August 26, 2026.
Pump and Pumping Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 1 day
View Details
NAICS: 484121
New
DIBBS
Logistics and Transportation Management (Origin to Destination)
General Freight Trucking, Long-Distance, Truckload

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 561910
New
DIBBS
Packaging and Preparation for Shipment of Military Material
Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 423490
New
DIBBS
Supply of Standardized Military Hardware (NSN 2540015778736)
Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541214
New
DIBBS
Government Contract Compliance and Administrative Support
Payroll Services

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541380
New
DIBBS
Quality Assurance and First Article Testing (FAT) Support
Testing Laboratories and Services

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331492
New
DIBBS
Domestic Sourcing of Raw Materials and Components
Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332721
New
DIBBS
Precision Manufacturing of Control Assembly
Precision Turned Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details