Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SEAL RING, METAL

Active
SPE7L3-26-T-115VFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a metal seal ring identified by part number 43 1/2-9118-54 or 469118 PIECE 54, with the NSN 5330-01-274-9863, for a quantity of six units. The item is subject to strict packaging and technical requirements outlined in the DLA Master List of Technical and Quality Requirements, which governs compliance and interpretation based on solicitation or award dates depending on acquisition size. The supply must be free of asbestos as defined in FED-STD-313 and must not contain any intentional addition of mercury or mercury-containing compounds in direct contact with the hardware, except for limited functional uses such as in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or specific chemical reagents authorized by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier in accordance with NAVSEA 5100-003D. Any non-accepted supplies must have all government identification removed prior to return. The contract is issued under solicitation SPE7L3-26-T-115V with a response deadline of July 23, 2026, and requires delivery within 116 days of award. The item is procured by the Department of Defense under the Land Supplier Operations Vehicle Support organization, with performance location in Tracy, California, 95304-5000, and Robert Tavenner designated as the primary point of contact.

General Info

Six metal seal rings, NSN 5330-01-274-9863, asbestos-free, mercury-compliant, delivery due 116 days post-award.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L3-26-T-115V for DLA Land and Maritime Vehicle Support

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUS
Contacts
Robert Tavenner
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SEAL RING,METAL
SEAL RING,METAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
KINGSBURY INC (75333)
PHILADELPHIA PA
P/N 43 1/2-9118-54 0R P/N 469118 PIECE 54
NO ASBESTOS AS DEFINED IN FED-STD-313 IS
PERMITTED IN THIS ITEM
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
ADEQUATE DATA FOR NSN/Part Number: 5330-01-274-9863 Quantity: 6 EA Purchase Request: 7016888540QTY: 6 Delivery: 116 days ADO

Similar Contracts

NAICS: 339991
New
DIBBS
PACKING, PREFORMEDThe contract specifies the procurement of preformed packing items under solicitation SPE7L1-26-T-827F, with a quantity of 40 units to be delivered within 54 days to DLA Distribution Albany, Georgia. The item, identified by NSN 5330-15-032-5642, must be packaged in accordance with MIL-DTL-117, Type II, Class C, Style 1 — a medium duty, waterproof, greaseproof, and opaque bag — due to the sensitivity of Federal Supply Classifications 5330/5331 to ultraviolet degradation. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and palletization must adhere to DLA packaging requirements. The delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Mercury or mercury-containing compounds are prohibited except in defined functional applications such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA, with portable devices containing mercury requiring shock-proof construction and secondary containment as per NAVSEA 5100-003D. Asbestos is strictly forbidden. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions based on solicitation or award dates depending on acquisition type. Documentation for source approval and hazardous material shipping must follow specified protocols, including the parcel post and freight shipping addresses provided. The point of contact for inquiries is Katherine Woods, and the solicitation response deadline is July 23, 2026.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
O-RINGThe contract specifies the procurement of two O-rings with part number 364-0558-474 and NSN 5331-01-284-3729, sourced from Carver Pump Co in Muscatine, IA, under solicitation SPE7L1-26-T-826F. Delivery is required within 20 days of award, and the item must comply with DLA Packaging Requirements for Procurement, as well as technical and quality standards referenced through R or I numbers in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The O-rings must be free of asbestos as defined in FED-STD-313 and must not contain or come into direct contact with mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or Navsea-specified chemical analysis reagents. Portable fluorescent lamps or instruments containing mercury must be shock-proof and include a secondary containment boundary as per NAVSEA 5100-003D. All supplies must be delivered without government identification if rejected. The solicitation was posted on July 12, 2026, with responses due by July 23, 2026, under NAICS code 339991, managed by the Department of Defense’s Land Supply Chain through the DLA, with Kristina Derry as the primary point of contact. The place of performance is FPO, 96632.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
O-RINGThe contract pertains to the procurement of 1,730 O-rings identified by NSN 5331-00-172-7223 under solicitation SPE7L1-26-T-826Y, with a required delivery within 85 days of award. The item must conform to current revision standards established by either military or recognized non-government consensus standards, with prior revisions still acceptable for previously manufactured units—however, all new production must adhere strictly to the latest version. Packaging requirements mandate medium-duty, waterproof, greaseproof, and opaque bags compliant with MIL-DTL-117, Type II, Class C, Style 1, applicable to direct vendor delivery, foreign military sales, and stock shipments. The O-rings are subject to a non-extendable shelf life of 180 months and must be free of asbestos; any alternative materials require formal approval per Clause L30 and Provision 4 conditions. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise directed, and verification levels for critical, major, and minor attributes are fixed at VII, IV, and II respectively. Federal Supply Classifications 5330/5331 are referenced, and the item is exposed to UV deterioration risks. The contract supports full and open competition under the NAICS code 339991, with performance located in San Diego, California, and a response deadline of July 23, 2026.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
PACKING ASSEMBLYThis contract, identified by solicitation number SPE7L4-26-U-0955, pertains to the procurement of a packing assembly with National Stock Number 5330-01-469-5415, under Federal Supply Classifications 5330/5331, requiring delivery of nine units within 91 days, shipped FOB origin with no variance allowed in quantity. The item is designated as a critical application product supplied by CHESAPEAKE BAY RUBBER & GASKET CO INC, part number 620NH, and must be packaged in accordance with MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, opaque bag to shield against UV degradation. Packaging and marking must comply fully with MIL-STD-2073-1E and MIL-STD-129, with no special marking codes applied, and palletization must adhere to DLA’s packaging requirements. The item is subject to strict prohibitions against asbestos per FED-STD-313 and the intentional introduction of mercury or mercury compounds, except under narrow exemptions for functional uses in batteries, fluorescent lamps, sensors, weapon systems, or reagents specified by NAVSEA, with portable fluorescent lamps and instruments required to include shock-proof designs and secondary containment. All shipments, including direct vendor delivery, foreign military sales, and stock items, must meet these packaging standards. The contract is issued under DLA Direct, CONUS coverage, with inspection and acceptance occurring at destination, and the unit of issue is SE. The buyer is the Department of Defense, specifically LSO Combat Vehicles and Armament, with procurement managed under a simplified acquisition threshold and governed by the DLA Master List of Technical and Quality Requirements as of the solicitation issuance date, with Heather Kessler designated as the primary point of contact.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 14 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
PACKING ASSEMBLYThe contract pertains to the packing assembly for a specific military item with NSN 5330-01-096-9181, requiring a quantity of 12,321 units to be delivered within 98 days after the award date. All items must be free of asbestos, and any previously listed asbestos-containing part numbers are strictly prohibited; substitutions must be approved under Clause L30 and Provision 4 conditions. The packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, specifying a medium-duty, waterproof, greaseproof, and opaque bag to protect against ultraviolet degradation, particularly important since the Federal Supply Classifications 5330/5331 involve items susceptible to UV exposure. This requirement applies to direct vendor delivery, foreign military sales, and stock shipments. Identification marking must adhere to MIL-STD-130N dated November 16, 2012, and government identification must be removed from non-accepted supplies in accordance with RQ011. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The solicitation number is SPE7LX-26-U-8782, issued on July 12, 2026, with responses due by July 27, 2026, under NAICS code 339991, managed by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 14 hours ago

DEADLINE

in 14 days
View Details