Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SEAL, TURBINE ROTOR

Active
SPE7L3-26-T-136FFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of six SEAL, TURBINE ROTOR units identified by NSN 5330-00-163-5815 under solicitation SPE7L3-26-T-136F, with a delivery requirement of 161 days after award. The item is subject to strict compliance with DLA packaging standards and technical quality requirements referenced in the DLA Master List of Technical and Quality Requirements, where any R or I designations must be adhered to as defined in that master list. The specification explicitly prohibits the use of asbestos as defined in FED-STD-313, and all non-accepted supplies must have government identification removed prior to return. The procurement falls under NAICS code 339991 and is managed by the Department of Defense through the Land Supplier Operations Vehicle Support organization, with performance required at Cherry Point, North Carolina, zip 28533-5040. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and the primary point of contact is Susan Diamond at DLA, reachable via phone or email for procurement inquiries.

General Info

Procure six SEAL TURBINE ROTOR units, deliver in 161 days, no asbestos, comply with DLA standards, Cherry Point, NC.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

PHANTOM RD BLDG 147 BAY A, CHERRY POINT, NC, 28533-5040, US

Set-Aside

NONE

Documents

(1)

SPE7L3-26-T-136F.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUS
Contacts
Susan Diamond
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SEAL,TURBINE ROTOR
SEAL, TURBINE ROTOR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NO ASBESTOS AS DEFINED IN FED-STD-313 IS
PERMITTED IN THIS ITEM
ADEQUATE DATA FOR NSN/Part Number: 5330-00-163-5815 Quantity: 6 EA Purchase Request: 7017600756QTY: 6 Delivery: 161 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
SEAL, PLAINThe contract pertains to the procurement of one unit of a plain seal identified by NSN 5330-01-584-9181 and purchase request number 7017465423, with a required delivery within 20 days to the destination APO AE 09321, FOB destination. Packaging must comply strictly with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. The item is classified under the DoD unit of issue system, and packaging and palletization must adhere to DLA’s official packaging requirements referenced in RP001. The delivery is destined for the Royal Jordanian Air Force at Muwaffaq Salti Air Base in Jordan, with transportation logistics governed by DLAD procedural notes C19 and C20. The contract includes detailed government-use codes and project identifiers, and full technical and quality specifications are incorporated by reference from the DLA Master List of Technical and Quality Requirements. The solicitation number is SPE7L1-26-T-885J, issued under a federal acquisition framework with a response deadline of August 10, 2026, and an original required delivery date of July 15, 2026.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC STThe contract is for the procurement of 22 units of a nonmetallic strip seal with NSN 5330-01-183-7118, under solicitation SPE7L1-26-T-884U, issued by the Department of Defense’s Land Supply Chain. The item is classified as a commercial off-the-shelf product, and delivery is required within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. Sampling and inspection must comply with MIL-STD-1916 or ASQ H1331 Table 1, using a zero-defect acceptance criterion unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. The place of performance is Tinker AFB, OK, with Kristina Derry listed as the primary point of contact and the response deadline set for August 10, 2026.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMEDThis contract, identified by solicitation number SPE7LX-26-U-9049, seeks the procurement of 322 units of preformed packing with NSN 5330-01-172-2590, to be delivered within 80 days of award. The requirement incorporates all technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. Compliance with MIL-STD-130N for identification marking of U.S. military property is mandatory, and all items must be free of Class I ozone-depleting chemicals, with any substitutes requiring prior approval unless explicitly authorized by the specification. The contract enforces strict export control protocols under ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons or entities, and restricts access to contractors who hold valid US/Canada Joint Certification Program certification, have completed required DLA training on handling export-controlled data, and obtained formal approval from the DLA controlling authority. Configuration changes require formal engineering change proposals and variance requests, and all government identification must be removed from non-accepted supplies before disposal. Cybersecurity compliance mandates CMMC Level 2 certification for third-party assessment organizations involved in performance, and covered defense information is subject to applicable DFARS clauses, including DFARS 252.225-7048. The performance location and delivery terms are governed by U.S. federal standards, and inquiries should be directed to the primary point of contact, Theodore Misiolek, at the provided DLA email and phone.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
GASKETING MATERIAL,The contract is for gasketing material with NSN/Part Number 5999-01-506-6277 in a quantity of 280 units, under solicitation number SPE7M0-26-T-020U, with a total small business set-aside classification. Delivery is required within five days after date of award, and responses must be submitted by August 10, 2026. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation issue date or award date depending on the scale of acquisition. The item is subject to export control under ITAR or EAR, meaning technical data associated with it cannot be disclosed to foreign persons without prior authorization from the Department of State or Commerce, and this restriction extends to foreign national employees and subsidiaries. Only contractors with approved US/Canada Joint Certification Program certification, completed DLA export control training, and approved access via the DLA questionnaire are permitted to handle this data. Physical marking and removal of government identification from non-accepted supplies are required, and the place of performance is specified as Chambersburg, Pennsylvania, with Gerard Quinn of the Department of Defense serving as the primary point of contact.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAINThe contract specifies the procurement of a SEAL, PLAIN item with NSN 5330-99-852-6523, quantity of 111 units, to be delivered FOB origin within 97 days, with zero tolerance for quantity variance. The item must be packaged in a medium duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, due to the sensitivity of the material to ultraviolet radiation, and this packaging requirement applies to all delivery types including direct vendor delivery, foreign military sales, and stock shipments. Marking must comply with MIL-STD-129, including the special instruction “20 – 20 Do not bend,” and palletization must follow DLA packaging guidelines. The item is designated as a restricted source requiring government engineering approval, and no mercury or mercury-containing compounds may be intentionally added or come in direct contact with the hardware, except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents. Portable devices containing mercury must be shockproof with a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 using zero-based acceptance criteria, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Inspection and acceptance occur at destination, and all technical and quality requirements referenced through R or I numbers are governed by the DLA Master List. The contract is a total small business set-aside under NAICS 339991, with a response deadline of August 5, 2026, and delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339991
New
DIBBS
GASKET AND SEAL SET
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
PACKING MATERIAL
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
RUBBER STRIPThe contract specifies the procurement of a rubber strip with a unit of issue defined as one length equaling eleven feet, identified by the NSN 5330-01-164-7612 and referenced under purchase request 7017645374. The item must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with revisions applicable based on solicitation or award dates depending on the scale of acquisition. All supplies must be free of asbestos, and any alternative materials must undergo formal approval per Clause L30 and Provision 4 conditions. The product is subject to strict packaging requirements under MIL-DTL-117, Type II, Class C, Style 1, requiring medium-duty, waterproof, greaseproof, and opaque sealing to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Mercury and mercury-containing compounds are strictly prohibited unless expressly exempted for uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents; when permitted, portable devices must have shock-proof construction with a secondary containment barrier as mandated by NAVSEA 5100-003D. Identification marking must follow MIL-STD-130N, and government identification must be removed from non-accepted supplies. The solicitation, issued under SPE7L1-26-T-885D, has a response deadline of August 10, 2026, with delivery required within 20 days of award, and is managed by the Department of Defense’s Land Supply Chain through point of contact Kristina Derry.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
O-RINGThe contract specifies the procurement of two O-rings with part number F37030262 and NSN 5331-01-250-6275, supplied by FUNK MFG CO as a subcontractor to DEERE & CO. The items must comply with DLA Packaging Requirements for Procurement and incorporate technical and quality standards designated by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision Controlled by the solicitation issue date. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or its direct contact, except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and equipped with a secondary containment barrier as per NAVSEA 5100-003D. Asbestos, as defined in FED-STD-313, is entirely forbidden in the product. The delivery deadline is 20 days after order, with the solicitation issued under SPE7L1-26-T-885E, posted on July 28, 2026, and responses due by August 10, 2026. The purchase request is 7017523837, with performance located in San Diego, California, and the point of contact is Kristina Derry at the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
PARTS KIT, SEAL REPL
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
O-RING
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 336390
New
DIBBS
VALVE, RELAY, AIR PRESSUThis contract specifies the procurement of a valve, relay, air pressure, identified by NSN 2530-01-479-1014 and part numbers K161992OR, M81574, and 5013223 from approved suppliers including BENDIX COMMERCIAL VEHICLE SYSTEMS LLC, ROSENBAUER INTERNATIONAL AG, and DANA COMMERCIAL VEHICLE PRODUCTS. The requirement is for 76 units at a unit price of $76.00, totaling $5,776.00, with delivery due in 137 days from contract award, FOB origin, and no variance allowed in quantity. Inspection and acceptance occur at destination, with packaging required to comply with MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking codes. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and this is a critical application item subject to removal of government identification from non-accepted supplies. The contract is a total small business set-aside under NAICS code 336390, with a response deadline of August 10, 2026, and the awarding agency is the Department of Defense under Land Supplier Operations Vehicle Support. Delivery must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20, and the original required delivery date is January 10, 2027.
Other Motor Vehicle Parts Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
PAN, DRAINThis contract pertains to the procurement of five units of a PAN, DRAIN item with NSN 4910-01-626-4341 under solicitation SPE7L3-26-T-136B, issued by the Department of Defense through the Land Supplier Operations Vehicle Support office. Delivery is required within 147 days of award, with FOB origin terms and inspection and acceptance occurring at the destination warehouse in Tracy, California. The item must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking codes applied, and must be palletized according to DLA packaging guidelines. The contract explicitly prohibits the use of ozone-depleting chemicals and restricts mercury or mercury-containing compounds unless specifically exempted for approved functional applications such as certain batteries, lighting, or weapon systems, with additional containment requirements for portable devices. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Unit of issue is each (EA), with zero variance allowed in quantity, and shipment must follow DLAD procedural notes C19 and C20. The required ship date is January 5, 2027, with an original delivery deadline of January 18, 2027. All supplies must conform to DoD authorized unit of issue standards, and substitute materials must be pre-approved unless explicitly authorized by the specifications.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333998
New
DIBBS
PARTS KIT, SPECIALIZEDThe contract pertains to a Parts Kit, Specialized, identified by NSN 2590-01-495-6900, with a quantity of 113 KT and a purchase request number 7017603450 for a quantity of 287 units. Delivery is scheduled for 141 days after order date. Technical data associated with this item is subject to strict export controls under either ITAR or EAR, prohibiting any unauthorized disclosure or transfer to foreign persons, including foreign nationals within the United States or overseas. Compliance with DFARS 252.225-7048 is mandatory, and distribution is restricted to DLA contractors with approved US/Canada Joint Certification Program status, verified training completion on handling controlled technical data, and formal approval from DLA authorities. The solicitation, numbered SPE7L3-26-T-136D, was posted on July 28, 2026, with responses due by August 10, 2026, and is designated as a Total Small Business Set-Aside under NAICS code 333998. The contracting activity falls under the Department of Defense through the Land Supplier Operations Vehicle Support agency, with performance located in Jacksonville, Florida, and primary point of contact being Matthew Curry.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333998
New
DIBBS
FELT, MECHANICAL, PREFORThe contract pertains to the procurement of 385 units of FELT, MECHANICAL, PREFORMED with NSN 5330-00-599-8279, specified to meet precise dimensional requirements of 5.500 inches in outer diameter, 4.734 inches in inner diameter, and 0.187 inches in thickness. The item is classified as a commercial item and must be manufactured in accordance with the current revision of a recognized part standard, either military or consensus non-governmental, with prior revisions still acceptable for historical hardware. All new units produced after the solicitation date must conform to the latest standard revision. The item must comply with MIL-STD-130N for identification marking, contain no asbestos as defined by FED-STD-313, and is subject to critical item source inspection. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with a zero-defect acceptance criterion unless otherwise stated, and unspecified attributes are treated as major with assigned verification levels or AQLs. The purchase is fully competitive under a military or federal specification. The solicitation number is SPE7L3-26-T-135S, issued on July 28, 2026, with a response deadline of August 7, 2026. Delivery is required within 48 days after award, and performance is designated for Robins AFB, GA, ZIP 31098-1887. The contracting agency is the Department of Defense under Land Supplier Opns Vehicle Spt, with Susan Diamond as the primary point of contact via email dla.flbb1prs@dla.mil and phone 6146925625. The NAICS code is 333998, and the acquisition falls under DLA packaging and technical quality requirements, incorporating standards from the DLA Master List of Technical and Quality Requirements. The procurement does not involve any set-aside designation and is subject to the DLA master list revision in effect on the solicitation issue date.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333998
New
DIBBS
FILTER ASSEMBLY, FLUThis contract pertains to the procurement of a Filter Assembly, Fluid with NSN 2940-01-436-9579 and part number HZ8640A20KNTB3HY258, for a quantity of four units. Manufacturing must follow a metal casting process requiring specialized tooling, and sourcing inquiries must be directed to DLA’s Aviation or Land & Maritime Supply Chains teams. The item is designated as a restricted source requiring government engineering approval, and the specification strictly prohibits intentional use of mercury or mercury-containing compounds in the hardware, except for specific exempted applications such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents as authorized by NAVSEA; portable devices containing mercury must include shockproof design and a secondary containment boundary per NAVSEA 5100-003D. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with revision control tied to the solicitation or award date depending on acquisition size. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including the special marking code 06 for delicate instruments and an upward arrow, and palletization follows DLA packaging standards. Delivery is FOB origin with a required delivery window of 161 days, with inspection and acceptance occurring at the destination. The item must be delivered to DLA Distribution at the New Cumberland, PA facility by January 19, 2027, with no variance permitted in quantity. Transportation procedures align with DLAD procedural notes C19 and C20, and the unit of issue is each (EA) as per DoD standards.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
New
DIBBS
SLIDE, PISTOLThe contract solicitation SPE7L3-26-Q-1223 seeks two pistol slides identified by NSN 1005-01-128-5468, with a delivery requirement of 329 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. The item is classified as a Category I munition under DoDM 4160.28-Vol. 3 and is subject to demilitarization requirements. Cybersecurity compliance mandates CMMC Level 2, either through self-assessment or certification by a C3PAO. Packaging must adhere to DLA standards, and tailored quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals, and inspection and acceptance occur at origin. Government identification must be removed from non-accepted items, and components must originate from qualified manufacturers listed on approved QPLs or QMLs. Item Unique Identification is waived per customer request. Technical data associated with the item is subject to ITAR or EAR export controls, restricting disclosure to foreign persons regardless of location. Access to this data is limited to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization. The point of contact is Katelyn Young of the Department of Defense, with responses due by August 7, 2026.

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
COUPLING, SHAFT, FLEX
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 561910
New
DIBBS
Military Shipment Marking and Barcoding Services
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 484220
New
DIBBS
Transportation and First Destination Shipping (FOB Origin)
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 334510
New
DIBBS
Mercury-Containing Component Handling and Secondary Containment
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and Safety Data Sheet (SDS) Preparation
Environmental Consulting Services

POSTED

1 day ago

DEADLINE

in 2 days
View Details